doc/Doxyfile.in
changeset 133 d76e2ff9c70d
child 150 f3af90ef0143
equal deleted inserted replaced
-1:000000000000 0:6341ff5b0560
       
     1 # Doxyfile 1.4.2
       
     2 
       
     3 # This file describes the settings to be used by the documentation system
       
     4 # doxygen (www.doxygen.org) for a project
       
     5 #
       
     6 # All text after a hash (#) is considered a comment and will be ignored
       
     7 # The format is:
       
     8 #       TAG = value [value, ...]
       
     9 # For lists items can also be appended using:
       
    10 #       TAG += value [value, ...]
       
    11 # Values that contain spaces should be placed between quotes (" ")
       
    12 
       
    13 #---------------------------------------------------------------------------
       
    14 # Project related configuration options
       
    15 #---------------------------------------------------------------------------
       
    16 
       
    17 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
       
    18 # by quotes) that should identify the project.
       
    19 
       
    20 PROJECT_NAME           = @PACKAGE_NAME@
       
    21 
       
    22 # The PROJECT_NUMBER tag can be used to enter a project or revision number. 
       
    23 # This could be handy for archiving the generated documentation or 
       
    24 # if some version control system is used.
       
    25 
       
    26 PROJECT_NUMBER         = @PACKAGE_VERSION@
       
    27 
       
    28 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
       
    29 # base path where the generated documentation will be put. 
       
    30 # If a relative path is entered, it will be relative to the location 
       
    31 # where doxygen was started. If left blank the current directory will be used.
       
    32 
       
    33 OUTPUT_DIRECTORY       = 
       
    34 
       
    35 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
       
    36 # 4096 sub-directories (in 2 levels) under the output directory of each output 
       
    37 # format and will distribute the generated files over these directories. 
       
    38 # Enabling this option can be useful when feeding doxygen a huge amount of 
       
    39 # source files, where putting all generated files in the same directory would 
       
    40 # otherwise cause performance problems for the file system.
       
    41 
       
    42 CREATE_SUBDIRS         = NO
       
    43 
       
    44 # The OUTPUT_LANGUAGE tag is used to specify the language in which all 
       
    45 # documentation generated by doxygen is written. Doxygen will use this 
       
    46 # information to generate all constant output in the proper language. 
       
    47 # The default language is English, other supported languages are: 
       
    48 # Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, 
       
    49 # Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, 
       
    50 # Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, 
       
    51 # Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, 
       
    52 # Swedish, and Ukrainian.
       
    53 
       
    54 OUTPUT_LANGUAGE        = English
       
    55 
       
    56 # This tag can be used to specify the encoding used in the generated output. 
       
    57 # The encoding is not always determined by the language that is chosen, 
       
    58 # but also whether or not the output is meant for Windows or non-Windows users. 
       
    59 # In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES 
       
    60 # forces the Windows encoding (this is the default for the Windows binary), 
       
    61 # whereas setting the tag to NO uses a Unix-style encoding (the default for 
       
    62 # all platforms other than Windows).
       
    63 
       
    64 USE_WINDOWS_ENCODING   = NO
       
    65 
       
    66 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
       
    67 # include brief member descriptions after the members that are listed in 
       
    68 # the file and class documentation (similar to JavaDoc). 
       
    69 # Set to NO to disable this.
       
    70 
       
    71 BRIEF_MEMBER_DESC      = YES
       
    72 
       
    73 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
       
    74 # the brief description of a member or function before the detailed description. 
       
    75 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
       
    76 # brief descriptions will be completely suppressed.
       
    77 
       
    78 REPEAT_BRIEF           = NO
       
    79 
       
    80 # This tag implements a quasi-intelligent brief description abbreviator 
       
    81 # that is used to form the text in various listings. Each string 
       
    82 # in this list, if found as the leading text of the brief description, will be 
       
    83 # stripped from the text and the result after processing the whole list, is 
       
    84 # used as the annotated text. Otherwise, the brief description is used as-is. 
       
    85 # If left blank, the following values are used ("$name" is automatically 
       
    86 # replaced with the name of the entity): "The $name class" "The $name widget" 
       
    87 # "The $name file" "is" "provides" "specifies" "contains" 
       
    88 # "represents" "a" "an" "the"
       
    89 
       
    90 ABBREVIATE_BRIEF       = 
       
    91 
       
    92 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
       
    93 # Doxygen will generate a detailed section even if there is only a brief 
       
    94 # description.
       
    95 
       
    96 ALWAYS_DETAILED_SEC    = NO
       
    97 
       
    98 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all 
       
    99 # inherited members of a class in the documentation of that class as if those 
       
   100 # members were ordinary class members. Constructors, destructors and assignment 
       
   101 # operators of the base classes will not be shown.
       
   102 
       
   103 INLINE_INHERITED_MEMB  = NO
       
   104 
       
   105 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
       
   106 # path before files name in the file list and in the header files. If set 
       
   107 # to NO the shortest path that makes the file name unique will be used.
       
   108 
       
   109 FULL_PATH_NAMES        = YES
       
   110 
       
   111 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
       
   112 # can be used to strip a user-defined part of the path. Stripping is 
       
   113 # only done if one of the specified strings matches the left-hand part of 
       
   114 # the path. The tag can be used to show relative paths in the file list. 
       
   115 # If left blank the directory from which doxygen is run is used as the 
       
   116 # path to strip.
       
   117 
       
   118 STRIP_FROM_PATH        = @abs_top_srcdir@
       
   119 
       
   120 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
       
   121 # the path mentioned in the documentation of a class, which tells 
       
   122 # the reader which header file to include in order to use a class. 
       
   123 # If left blank only the name of the header file containing the class 
       
   124 # definition is used. Otherwise one should specify the include paths that 
       
   125 # are normally passed to the compiler using the -I flag.
       
   126 
       
   127 STRIP_FROM_INC_PATH    = @abs_top_srcdir@
       
   128 
       
   129 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
       
   130 # (but less readable) file names. This can be useful is your file systems 
       
   131 # doesn't support long names like on DOS, Mac, or CD-ROM.
       
   132 
       
   133 SHORT_NAMES            = YES
       
   134 
       
   135 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
       
   136 # will interpret the first line (until the first dot) of a JavaDoc-style 
       
   137 # comment as the brief description. If set to NO, the JavaDoc 
       
   138 # comments will behave just like the Qt-style comments (thus requiring an 
       
   139 # explicit @brief command for a brief description.
       
   140 
       
   141 JAVADOC_AUTOBRIEF      = NO
       
   142 
       
   143 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
       
   144 # treat a multi-line C++ special comment block (i.e. a block of //! or /// 
       
   145 # comments) as a brief description. This used to be the default behaviour. 
       
   146 # The new default is to treat a multi-line C++ comment block as a detailed 
       
   147 # description. Set this tag to YES if you prefer the old behaviour instead.
       
   148 
       
   149 MULTILINE_CPP_IS_BRIEF = NO
       
   150 
       
   151 # If the DETAILS_AT_TOP tag is set to YES then Doxygen 
       
   152 # will output the detailed description near the top, like JavaDoc.
       
   153 # If set to NO, the detailed description appears after the member 
       
   154 # documentation.
       
   155 
       
   156 DETAILS_AT_TOP         = YES
       
   157 
       
   158 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
       
   159 # member inherits the documentation from any documented member that it 
       
   160 # re-implements.
       
   161 
       
   162 INHERIT_DOCS           = NO
       
   163 
       
   164 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
       
   165 # tag is set to YES, then doxygen will reuse the documentation of the first 
       
   166 # member in the group (if any) for the other members of the group. By default 
       
   167 # all members of a group must be documented explicitly.
       
   168 
       
   169 DISTRIBUTE_GROUP_DOC   = NO
       
   170 
       
   171 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce 
       
   172 # a new page for each member. If set to NO, the documentation of a member will 
       
   173 # be part of the file/class/namespace that contains it.
       
   174 
       
   175 SEPARATE_MEMBER_PAGES  = NO
       
   176 
       
   177 # The TAB_SIZE tag can be used to set the number of spaces in a tab. 
       
   178 # Doxygen uses this value to replace tabs by spaces in code fragments.
       
   179 
       
   180 TAB_SIZE               = 8
       
   181 
       
   182 # This tag can be used to specify a number of aliases that acts 
       
   183 # as commands in the documentation. An alias has the form "name=value". 
       
   184 # For example adding "sideeffect=\par Side Effects:\n" will allow you to 
       
   185 # put the command \sideeffect (or @sideeffect) in the documentation, which 
       
   186 # will result in a user-defined paragraph with heading "Side Effects:". 
       
   187 # You can put \n's in the value part of an alias to insert newlines.
       
   188 
       
   189 ALIASES                = 
       
   190 
       
   191 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 
       
   192 # sources only. Doxygen will then generate output that is more tailored for C. 
       
   193 # For instance, some of the names that are used will be different. The list 
       
   194 # of all members will be omitted, etc.
       
   195 
       
   196 OPTIMIZE_OUTPUT_FOR_C  = NO
       
   197 
       
   198 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources 
       
   199 # only. Doxygen will then generate output that is more tailored for Java. 
       
   200 # For instance, namespaces will be presented as packages, qualified scopes 
       
   201 # will look different, etc.
       
   202 
       
   203 OPTIMIZE_OUTPUT_JAVA   = NO
       
   204 
       
   205 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
       
   206 # the same type (for instance a group of public functions) to be put as a 
       
   207 # subgroup of that type (e.g. under the Public Functions section). Set it to 
       
   208 # NO to prevent subgrouping. Alternatively, this can be done per class using 
       
   209 # the \nosubgrouping command.
       
   210 
       
   211 SUBGROUPING            = YES
       
   212 
       
   213 #---------------------------------------------------------------------------
       
   214 # Build related configuration options
       
   215 #---------------------------------------------------------------------------
       
   216 
       
   217 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
       
   218 # documentation are documented, even if no documentation was available. 
       
   219 # Private class members and static file members will be hidden unless 
       
   220 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
       
   221 
       
   222 EXTRACT_ALL            = NO
       
   223 
       
   224 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
       
   225 # will be included in the documentation.
       
   226 
       
   227 EXTRACT_PRIVATE        = YES
       
   228 
       
   229 # If the EXTRACT_STATIC tag is set to YES all static members of a file 
       
   230 # will be included in the documentation.
       
   231 
       
   232 EXTRACT_STATIC         = YES
       
   233 
       
   234 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
       
   235 # defined locally in source files will be included in the documentation. 
       
   236 # If set to NO only classes defined in header files are included.
       
   237 
       
   238 EXTRACT_LOCAL_CLASSES  = NO
       
   239 
       
   240 # This flag is only useful for Objective-C code. When set to YES local 
       
   241 # methods, which are defined in the implementation section but not in 
       
   242 # the interface are included in the documentation. 
       
   243 # If set to NO (the default) only methods in the interface are included.
       
   244 
       
   245 EXTRACT_LOCAL_METHODS  = NO
       
   246 
       
   247 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
       
   248 # undocumented members of documented classes, files or namespaces. 
       
   249 # If set to NO (the default) these members will be included in the 
       
   250 # various overviews, but no documentation section is generated. 
       
   251 # This option has no effect if EXTRACT_ALL is enabled.
       
   252 
       
   253 HIDE_UNDOC_MEMBERS     = YES
       
   254 
       
   255 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
       
   256 # undocumented classes that are normally visible in the class hierarchy. 
       
   257 # If set to NO (the default) these classes will be included in the various 
       
   258 # overviews. This option has no effect if EXTRACT_ALL is enabled.
       
   259 
       
   260 HIDE_UNDOC_CLASSES     = YES
       
   261 
       
   262 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
       
   263 # friend (class|struct|union) declarations. 
       
   264 # If set to NO (the default) these declarations will be included in the 
       
   265 # documentation.
       
   266 
       
   267 HIDE_FRIEND_COMPOUNDS  = NO
       
   268 
       
   269 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
       
   270 # documentation blocks found inside the body of a function. 
       
   271 # If set to NO (the default) these blocks will be appended to the 
       
   272 # function's detailed documentation block.
       
   273 
       
   274 HIDE_IN_BODY_DOCS      = NO
       
   275 
       
   276 # The INTERNAL_DOCS tag determines if documentation 
       
   277 # that is typed after a \internal command is included. If the tag is set 
       
   278 # to NO (the default) then the documentation will be excluded. 
       
   279 # Set it to YES to include the internal documentation.
       
   280 
       
   281 INTERNAL_DOCS          = @DOXYGEN_INTERNAL_DOCS@
       
   282 
       
   283 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
       
   284 # file names in lower-case letters. If set to YES upper-case letters are also 
       
   285 # allowed. This is useful if you have classes or files whose names only differ 
       
   286 # in case and if your file system supports case sensitive file names. Windows 
       
   287 # and Mac users are advised to set this option to NO.
       
   288 
       
   289 CASE_SENSE_NAMES       = YES
       
   290 
       
   291 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
       
   292 # will show members with their full class and namespace scopes in the 
       
   293 # documentation. If set to YES the scope will be hidden.
       
   294 
       
   295 HIDE_SCOPE_NAMES       = YES
       
   296 
       
   297 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
       
   298 # will put a list of the files that are included by a file in the documentation 
       
   299 # of that file.
       
   300 
       
   301 SHOW_INCLUDE_FILES     = YES
       
   302 
       
   303 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
       
   304 # is inserted in the documentation for inline members.
       
   305 
       
   306 INLINE_INFO            = YES
       
   307 
       
   308 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
       
   309 # will sort the (detailed) documentation of file and class members 
       
   310 # alphabetically by member name. If set to NO the members will appear in 
       
   311 # declaration order.
       
   312 
       
   313 SORT_MEMBER_DOCS       = NO
       
   314 
       
   315 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
       
   316 # brief documentation of file, namespace and class members alphabetically 
       
   317 # by member name. If set to NO (the default) the members will appear in 
       
   318 # declaration order.
       
   319 
       
   320 SORT_BRIEF_DOCS        = NO
       
   321 
       
   322 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
       
   323 # sorted by fully-qualified names, including namespaces. If set to 
       
   324 # NO (the default), the class list will be sorted only by class name, 
       
   325 # not including the namespace part. 
       
   326 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
       
   327 # Note: This option applies only to the class list, not to the 
       
   328 # alphabetical list.
       
   329 
       
   330 SORT_BY_SCOPE_NAME     = NO
       
   331 
       
   332 # The GENERATE_TODOLIST tag can be used to enable (YES) or 
       
   333 # disable (NO) the todo list. This list is created by putting \todo 
       
   334 # commands in the documentation.
       
   335 
       
   336 GENERATE_TODOLIST      = YES
       
   337 
       
   338 # The GENERATE_TESTLIST tag can be used to enable (YES) or 
       
   339 # disable (NO) the test list. This list is created by putting \test 
       
   340 # commands in the documentation.
       
   341 
       
   342 GENERATE_TESTLIST      = YES
       
   343 
       
   344 # The GENERATE_BUGLIST tag can be used to enable (YES) or 
       
   345 # disable (NO) the bug list. This list is created by putting \bug 
       
   346 # commands in the documentation.
       
   347 
       
   348 GENERATE_BUGLIST       = YES
       
   349 
       
   350 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
       
   351 # disable (NO) the deprecated list. This list is created by putting 
       
   352 # \deprecated commands in the documentation.
       
   353 
       
   354 GENERATE_DEPRECATEDLIST= YES
       
   355 
       
   356 # The ENABLED_SECTIONS tag can be used to enable conditional 
       
   357 # documentation sections, marked by \if sectionname ... \endif.
       
   358 
       
   359 ENABLED_SECTIONS       = 
       
   360 
       
   361 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
       
   362 # the initial value of a variable or define consists of for it to appear in 
       
   363 # the documentation. If the initializer consists of more lines than specified 
       
   364 # here it will be hidden. Use a value of 0 to hide initializers completely. 
       
   365 # The appearance of the initializer of individual variables and defines in the 
       
   366 # documentation can be controlled using \showinitializer or \hideinitializer 
       
   367 # command in the documentation regardless of this setting.
       
   368 
       
   369 MAX_INITIALIZER_LINES  = 5
       
   370 
       
   371 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
       
   372 # at the bottom of the documentation of classes and structs. If set to YES the 
       
   373 # list will mention the files that were used to generate the documentation.
       
   374 
       
   375 SHOW_USED_FILES        = YES
       
   376 
       
   377 # If the sources in your project are distributed over multiple directories 
       
   378 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 
       
   379 # in the documentation.
       
   380 
       
   381 SHOW_DIRECTORIES       = YES
       
   382 
       
   383 # The FILE_VERSION_FILTER tag can be used to specify a program or script that 
       
   384 # doxygen should invoke to get the current version for each file (typically from the 
       
   385 # version control system). Doxygen will invoke the program by executing (via 
       
   386 # popen()) the command <command> <input-file>, where <command> is the value of 
       
   387 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 
       
   388 # provided by doxygen. Whatever the progam writes to standard output 
       
   389 # is used as the file version. See the manual for examples.
       
   390 
       
   391 FILE_VERSION_FILTER    = 
       
   392 
       
   393 #---------------------------------------------------------------------------
       
   394 # configuration options related to warning and progress messages
       
   395 #---------------------------------------------------------------------------
       
   396 
       
   397 # The QUIET tag can be used to turn on/off the messages that are generated 
       
   398 # by doxygen. Possible values are YES and NO. If left blank NO is used.
       
   399 
       
   400 QUIET                  = NO
       
   401 
       
   402 # The WARNINGS tag can be used to turn on/off the warning messages that are 
       
   403 # generated by doxygen. Possible values are YES and NO. If left blank 
       
   404 # NO is used.
       
   405 
       
   406 WARNINGS               = YES
       
   407 
       
   408 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
       
   409 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
       
   410 # automatically be disabled.
       
   411 
       
   412 WARN_IF_UNDOCUMENTED   = YES
       
   413 
       
   414 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
       
   415 # potential errors in the documentation, such as not documenting some 
       
   416 # parameters in a documented function, or documenting parameters that 
       
   417 # don't exist or using markup commands wrongly.
       
   418 
       
   419 WARN_IF_DOC_ERROR      = YES
       
   420 
       
   421 # This WARN_NO_PARAMDOC option can be abled to get warnings for 
       
   422 # functions that are documented, but have no documentation for their parameters 
       
   423 # or return value. If set to NO (the default) doxygen will only warn about 
       
   424 # wrong or incomplete parameter documentation, but not about the absence of 
       
   425 # documentation.
       
   426 
       
   427 WARN_NO_PARAMDOC       = NO
       
   428 
       
   429 # The WARN_FORMAT tag determines the format of the warning messages that 
       
   430 # doxygen can produce. The string should contain the $file, $line, and $text 
       
   431 # tags, which will be replaced by the file and line number from which the 
       
   432 # warning originated and the warning text. Optionally the format may contain 
       
   433 # $version, which will be replaced by the version of the file (if it could 
       
   434 # be obtained via FILE_VERSION_FILTER)
       
   435 
       
   436 WARN_FORMAT            = "$file:$line: $text"
       
   437 
       
   438 # The WARN_LOGFILE tag can be used to specify a file to which warning 
       
   439 # and error messages should be written. If left blank the output is written 
       
   440 # to stderr.
       
   441 
       
   442 WARN_LOGFILE           = doxygen.log
       
   443 
       
   444 #---------------------------------------------------------------------------
       
   445 # configuration options related to the input files
       
   446 #---------------------------------------------------------------------------
       
   447 
       
   448 # The INPUT tag can be used to specify the files and/or directories that contain 
       
   449 # documented source files. You may enter file names like "myfile.cpp" or 
       
   450 # directories like "/usr/src/myproject". Separate the files or directories 
       
   451 # with spaces.
       
   452 
       
   453 INPUT                  = @abs_top_srcdir@/doc \
       
   454                          @abs_top_srcdir@/lemon \
       
   455                          @abs_top_srcdir@/lemon/bits \
       
   456                          @abs_top_srcdir@/lemon/concepts \
       
   457                          @abs_top_srcdir@/demo \
       
   458                          @abs_top_srcdir@/tools \
       
   459                          @abs_top_srcdir@/test/test_tools.h
       
   460 
       
   461 # If the value of the INPUT tag contains directories, you can use the 
       
   462 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
       
   463 # and *.h) to filter out the source-files in the directories. If left 
       
   464 # blank the following patterns are tested: 
       
   465 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 
       
   466 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
       
   467 
       
   468 FILE_PATTERNS          = *.h *.cc *.dox
       
   469 
       
   470 # The RECURSIVE tag can be used to turn specify whether or not subdirectories 
       
   471 # should be searched for input files as well. Possible values are YES and NO. 
       
   472 # If left blank NO is used.
       
   473 
       
   474 RECURSIVE              = NO
       
   475 
       
   476 # The EXCLUDE tag can be used to specify files and/or directories that should 
       
   477 # excluded from the INPUT source files. This way you can easily exclude a 
       
   478 # subdirectory from a directory tree whose root is specified with the INPUT tag.
       
   479 
       
   480 EXCLUDE                = 
       
   481 
       
   482 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or 
       
   483 # directories that are symbolic links (a Unix filesystem feature) are excluded 
       
   484 # from the input.
       
   485 
       
   486 EXCLUDE_SYMLINKS       = NO
       
   487 
       
   488 # If the value of the INPUT tag contains directories, you can use the 
       
   489 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
       
   490 # certain files from those directories.
       
   491 
       
   492 EXCLUDE_PATTERNS       = 
       
   493 
       
   494 # The EXAMPLE_PATH tag can be used to specify one or more files or 
       
   495 # directories that contain example code fragments that are included (see 
       
   496 # the \include command).
       
   497 
       
   498 EXAMPLE_PATH           = @abs_top_srcdir@/demo \
       
   499                          @abs_top_srcdir@/LICENSE \
       
   500                          @abs_top_srcdir@/doc
       
   501 
       
   502 # If the value of the EXAMPLE_PATH tag contains directories, you can use the 
       
   503 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
       
   504 # and *.h) to filter out the source-files in the directories. If left 
       
   505 # blank all files are included.
       
   506 
       
   507 EXAMPLE_PATTERNS       = 
       
   508 
       
   509 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
       
   510 # searched for input files to be used with the \include or \dontinclude 
       
   511 # commands irrespective of the value of the RECURSIVE tag. 
       
   512 # Possible values are YES and NO. If left blank NO is used.
       
   513 
       
   514 EXAMPLE_RECURSIVE      = NO
       
   515 
       
   516 # The IMAGE_PATH tag can be used to specify one or more files or 
       
   517 # directories that contain image that are included in the documentation (see 
       
   518 # the \image command).
       
   519 
       
   520 IMAGE_PATH             = @abs_top_srcdir@/doc/images
       
   521 
       
   522 # The INPUT_FILTER tag can be used to specify a program that doxygen should 
       
   523 # invoke to filter for each input file. Doxygen will invoke the filter program 
       
   524 # by executing (via popen()) the command <filter> <input-file>, where <filter> 
       
   525 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
       
   526 # input file. Doxygen will then use the output that the filter program writes 
       
   527 # to standard output.  If FILTER_PATTERNS is specified, this tag will be 
       
   528 # ignored.
       
   529 
       
   530 INPUT_FILTER           = 
       
   531 
       
   532 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 
       
   533 # basis.  Doxygen will compare the file name with each pattern and apply the 
       
   534 # filter if there is a match.  The filters are a list of the form: 
       
   535 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 
       
   536 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
       
   537 # is applied to all files.
       
   538 
       
   539 FILTER_PATTERNS        = 
       
   540 
       
   541 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
       
   542 # INPUT_FILTER) will be used to filter the input files when producing source 
       
   543 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
       
   544 
       
   545 FILTER_SOURCE_FILES    = NO
       
   546 
       
   547 #---------------------------------------------------------------------------
       
   548 # configuration options related to source browsing
       
   549 #---------------------------------------------------------------------------
       
   550 
       
   551 # If the SOURCE_BROWSER tag is set to YES then a list of source files will 
       
   552 # be generated. Documented entities will be cross-referenced with these sources. 
       
   553 # Note: To get rid of all source code in the generated output, make sure also 
       
   554 # VERBATIM_HEADERS is set to NO.
       
   555 
       
   556 SOURCE_BROWSER         = NO
       
   557 
       
   558 # Setting the INLINE_SOURCES tag to YES will include the body 
       
   559 # of functions and classes directly in the documentation.
       
   560 
       
   561 INLINE_SOURCES         = NO
       
   562 
       
   563 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
       
   564 # doxygen to hide any special comment blocks from generated source code 
       
   565 # fragments. Normal C and C++ comments will always remain visible.
       
   566 
       
   567 STRIP_CODE_COMMENTS    = YES
       
   568 
       
   569 # If the REFERENCED_BY_RELATION tag is set to YES (the default) 
       
   570 # then for each documented function all documented 
       
   571 # functions referencing it will be listed.
       
   572 
       
   573 REFERENCED_BY_RELATION = NO
       
   574 
       
   575 # If the REFERENCES_RELATION tag is set to YES (the default) 
       
   576 # then for each documented function all documented entities 
       
   577 # called/used by that function will be listed.
       
   578 
       
   579 REFERENCES_RELATION    = NO
       
   580 
       
   581 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
       
   582 # will generate a verbatim copy of the header file for each class for 
       
   583 # which an include is specified. Set to NO to disable this.
       
   584 
       
   585 VERBATIM_HEADERS       = NO
       
   586 
       
   587 #---------------------------------------------------------------------------
       
   588 # configuration options related to the alphabetical class index
       
   589 #---------------------------------------------------------------------------
       
   590 
       
   591 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
       
   592 # of all compounds will be generated. Enable this if the project 
       
   593 # contains a lot of classes, structs, unions or interfaces.
       
   594 
       
   595 ALPHABETICAL_INDEX     = YES
       
   596 
       
   597 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
       
   598 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
       
   599 # in which this list will be split (can be a number in the range [1..20])
       
   600 
       
   601 COLS_IN_ALPHA_INDEX    = 2
       
   602 
       
   603 # In case all classes in a project start with a common prefix, all 
       
   604 # classes will be put under the same header in the alphabetical index. 
       
   605 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
       
   606 # should be ignored while generating the index headers.
       
   607 
       
   608 IGNORE_PREFIX          = 
       
   609 
       
   610 #---------------------------------------------------------------------------
       
   611 # configuration options related to the HTML output
       
   612 #---------------------------------------------------------------------------
       
   613 
       
   614 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
       
   615 # generate HTML output.
       
   616 
       
   617 GENERATE_HTML          = YES
       
   618 
       
   619 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
       
   620 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
       
   621 # put in front of it. If left blank `html' will be used as the default path.
       
   622 
       
   623 HTML_OUTPUT            = html
       
   624 
       
   625 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
       
   626 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
       
   627 # doxygen will generate files with .html extension.
       
   628 
       
   629 HTML_FILE_EXTENSION    = .html
       
   630 
       
   631 # The HTML_HEADER tag can be used to specify a personal HTML header for 
       
   632 # each generated HTML page. If it is left blank doxygen will generate a 
       
   633 # standard header.
       
   634 
       
   635 HTML_HEADER            = 
       
   636 
       
   637 # The HTML_FOOTER tag can be used to specify a personal HTML footer for 
       
   638 # each generated HTML page. If it is left blank doxygen will generate a 
       
   639 # standard footer.
       
   640 
       
   641 HTML_FOOTER            = 
       
   642 
       
   643 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
       
   644 # style sheet that is used by each HTML page. It can be used to 
       
   645 # fine-tune the look of the HTML output. If the tag is left blank doxygen 
       
   646 # will generate a default style sheet. Note that doxygen will try to copy 
       
   647 # the style sheet file to the HTML output directory, so don't put your own 
       
   648 # stylesheet in the HTML output directory as well, or it will be erased!
       
   649 
       
   650 HTML_STYLESHEET        = 
       
   651 
       
   652 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
       
   653 # files or namespaces will be aligned in HTML using tables. If set to 
       
   654 # NO a bullet list will be used.
       
   655 
       
   656 HTML_ALIGN_MEMBERS     = YES
       
   657 
       
   658 # If the GENERATE_HTMLHELP tag is set to YES, additional index files 
       
   659 # will be generated that can be used as input for tools like the 
       
   660 # Microsoft HTML help workshop to generate a compressed HTML help file (.chm) 
       
   661 # of the generated HTML documentation.
       
   662 
       
   663 GENERATE_HTMLHELP      = NO
       
   664 
       
   665 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
       
   666 # be used to specify the file name of the resulting .chm file. You 
       
   667 # can add a path in front of the file if the result should not be 
       
   668 # written to the html output directory.
       
   669 
       
   670 CHM_FILE               = 
       
   671 
       
   672 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 
       
   673 # be used to specify the location (absolute path including file name) of 
       
   674 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 
       
   675 # the HTML help compiler on the generated index.hhp.
       
   676 
       
   677 HHC_LOCATION           = 
       
   678 
       
   679 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
       
   680 # controls if a separate .chi index file is generated (YES) or that 
       
   681 # it should be included in the master .chm file (NO).
       
   682 
       
   683 GENERATE_CHI           = NO
       
   684 
       
   685 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
       
   686 # controls whether a binary table of contents is generated (YES) or a 
       
   687 # normal table of contents (NO) in the .chm file.
       
   688 
       
   689 BINARY_TOC             = NO
       
   690 
       
   691 # The TOC_EXPAND flag can be set to YES to add extra items for group members 
       
   692 # to the contents of the HTML help documentation and to the tree view.
       
   693 
       
   694 TOC_EXPAND             = NO
       
   695 
       
   696 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
       
   697 # top of each HTML page. The value NO (the default) enables the index and 
       
   698 # the value YES disables it.
       
   699 
       
   700 DISABLE_INDEX          = NO
       
   701 
       
   702 # This tag can be used to set the number of enum values (range [1..20]) 
       
   703 # that doxygen will group on one line in the generated HTML documentation.
       
   704 
       
   705 ENUM_VALUES_PER_LINE   = 4
       
   706 
       
   707 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
       
   708 # generated containing a tree-like index structure (just like the one that 
       
   709 # is generated for HTML Help). For this to work a browser that supports 
       
   710 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
       
   711 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
       
   712 # probably better off using the HTML help feature.
       
   713 
       
   714 GENERATE_TREEVIEW      = YES
       
   715 
       
   716 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
       
   717 # used to set the initial width (in pixels) of the frame in which the tree 
       
   718 # is shown.
       
   719 
       
   720 TREEVIEW_WIDTH         = 250
       
   721 
       
   722 #---------------------------------------------------------------------------
       
   723 # configuration options related to the LaTeX output
       
   724 #---------------------------------------------------------------------------
       
   725 
       
   726 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
       
   727 # generate Latex output.
       
   728 
       
   729 GENERATE_LATEX         = NO
       
   730 
       
   731 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
       
   732 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
       
   733 # put in front of it. If left blank `latex' will be used as the default path.
       
   734 
       
   735 LATEX_OUTPUT           = latex
       
   736 
       
   737 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 
       
   738 # invoked. If left blank `latex' will be used as the default command name.
       
   739 
       
   740 LATEX_CMD_NAME         = latex
       
   741 
       
   742 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
       
   743 # generate index for LaTeX. If left blank `makeindex' will be used as the 
       
   744 # default command name.
       
   745 
       
   746 MAKEINDEX_CMD_NAME     = makeindex
       
   747 
       
   748 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
       
   749 # LaTeX documents. This may be useful for small projects and may help to 
       
   750 # save some trees in general.
       
   751 
       
   752 COMPACT_LATEX          = YES
       
   753 
       
   754 # The PAPER_TYPE tag can be used to set the paper type that is used 
       
   755 # by the printer. Possible values are: a4, a4wide, letter, legal and 
       
   756 # executive. If left blank a4wide will be used.
       
   757 
       
   758 PAPER_TYPE             = a4wide
       
   759 
       
   760 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
       
   761 # packages that should be included in the LaTeX output.
       
   762 
       
   763 EXTRA_PACKAGES         = amsmath \
       
   764                          amssymb
       
   765 
       
   766 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
       
   767 # the generated latex document. The header should contain everything until 
       
   768 # the first chapter. If it is left blank doxygen will generate a 
       
   769 # standard header. Notice: only use this tag if you know what you are doing!
       
   770 
       
   771 LATEX_HEADER           = 
       
   772 
       
   773 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
       
   774 # is prepared for conversion to pdf (using ps2pdf). The pdf file will 
       
   775 # contain links (just like the HTML output) instead of page references 
       
   776 # This makes the output suitable for online browsing using a pdf viewer.
       
   777 
       
   778 PDF_HYPERLINKS         = YES
       
   779 
       
   780 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
       
   781 # plain latex in the generated Makefile. Set this option to YES to get a 
       
   782 # higher quality PDF documentation.
       
   783 
       
   784 USE_PDFLATEX           = YES
       
   785 
       
   786 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
       
   787 # command to the generated LaTeX files. This will instruct LaTeX to keep 
       
   788 # running if errors occur, instead of asking the user for help. 
       
   789 # This option is also used when generating formulas in HTML.
       
   790 
       
   791 LATEX_BATCHMODE        = NO
       
   792 
       
   793 # If LATEX_HIDE_INDICES is set to YES then doxygen will not 
       
   794 # include the index chapters (such as File Index, Compound Index, etc.) 
       
   795 # in the output.
       
   796 
       
   797 LATEX_HIDE_INDICES     = NO
       
   798 
       
   799 #---------------------------------------------------------------------------
       
   800 # configuration options related to the RTF output
       
   801 #---------------------------------------------------------------------------
       
   802 
       
   803 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
       
   804 # The RTF output is optimized for Word 97 and may not look very pretty with 
       
   805 # other RTF readers or editors.
       
   806 
       
   807 GENERATE_RTF           = NO
       
   808 
       
   809 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
       
   810 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
       
   811 # put in front of it. If left blank `rtf' will be used as the default path.
       
   812 
       
   813 RTF_OUTPUT             = rtf
       
   814 
       
   815 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
       
   816 # RTF documents. This may be useful for small projects and may help to 
       
   817 # save some trees in general.
       
   818 
       
   819 COMPACT_RTF            = NO
       
   820 
       
   821 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
       
   822 # will contain hyperlink fields. The RTF file will 
       
   823 # contain links (just like the HTML output) instead of page references. 
       
   824 # This makes the output suitable for online browsing using WORD or other 
       
   825 # programs which support those fields. 
       
   826 # Note: wordpad (write) and others do not support links.
       
   827 
       
   828 RTF_HYPERLINKS         = NO
       
   829 
       
   830 # Load stylesheet definitions from file. Syntax is similar to doxygen's 
       
   831 # config file, i.e. a series of assignments. You only have to provide 
       
   832 # replacements, missing definitions are set to their default value.
       
   833 
       
   834 RTF_STYLESHEET_FILE    = 
       
   835 
       
   836 # Set optional variables used in the generation of an rtf document. 
       
   837 # Syntax is similar to doxygen's config file.
       
   838 
       
   839 RTF_EXTENSIONS_FILE    = 
       
   840 
       
   841 #---------------------------------------------------------------------------
       
   842 # configuration options related to the man page output
       
   843 #---------------------------------------------------------------------------
       
   844 
       
   845 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
       
   846 # generate man pages
       
   847 
       
   848 GENERATE_MAN           = NO
       
   849 
       
   850 # The MAN_OUTPUT tag is used to specify where the man pages will be put. 
       
   851 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
       
   852 # put in front of it. If left blank `man' will be used as the default path.
       
   853 
       
   854 MAN_OUTPUT             = man
       
   855 
       
   856 # The MAN_EXTENSION tag determines the extension that is added to 
       
   857 # the generated man pages (default is the subroutine's section .3)
       
   858 
       
   859 MAN_EXTENSION          = .3
       
   860 
       
   861 # If the MAN_LINKS tag is set to YES and Doxygen generates man output, 
       
   862 # then it will generate one additional man file for each entity 
       
   863 # documented in the real man page(s). These additional files 
       
   864 # only source the real man page, but without them the man command 
       
   865 # would be unable to find the correct page. The default is NO.
       
   866 
       
   867 MAN_LINKS              = NO
       
   868 
       
   869 #---------------------------------------------------------------------------
       
   870 # configuration options related to the XML output
       
   871 #---------------------------------------------------------------------------
       
   872 
       
   873 # If the GENERATE_XML tag is set to YES Doxygen will 
       
   874 # generate an XML file that captures the structure of 
       
   875 # the code including all documentation.
       
   876 
       
   877 GENERATE_XML           = NO
       
   878 
       
   879 # The XML_OUTPUT tag is used to specify where the XML pages will be put. 
       
   880 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
       
   881 # put in front of it. If left blank `xml' will be used as the default path.
       
   882 
       
   883 XML_OUTPUT             = xml
       
   884 
       
   885 # The XML_SCHEMA tag can be used to specify an XML schema, 
       
   886 # which can be used by a validating XML parser to check the 
       
   887 # syntax of the XML files.
       
   888 
       
   889 XML_SCHEMA             = 
       
   890 
       
   891 # The XML_DTD tag can be used to specify an XML DTD, 
       
   892 # which can be used by a validating XML parser to check the 
       
   893 # syntax of the XML files.
       
   894 
       
   895 XML_DTD                = 
       
   896 
       
   897 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will 
       
   898 # dump the program listings (including syntax highlighting 
       
   899 # and cross-referencing information) to the XML output. Note that 
       
   900 # enabling this will significantly increase the size of the XML output.
       
   901 
       
   902 XML_PROGRAMLISTING     = YES
       
   903 
       
   904 #---------------------------------------------------------------------------
       
   905 # configuration options for the AutoGen Definitions output
       
   906 #---------------------------------------------------------------------------
       
   907 
       
   908 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 
       
   909 # generate an AutoGen Definitions (see autogen.sf.net) file 
       
   910 # that captures the structure of the code including all 
       
   911 # documentation. Note that this feature is still experimental 
       
   912 # and incomplete at the moment.
       
   913 
       
   914 GENERATE_AUTOGEN_DEF   = NO
       
   915 
       
   916 #---------------------------------------------------------------------------
       
   917 # configuration options related to the Perl module output
       
   918 #---------------------------------------------------------------------------
       
   919 
       
   920 # If the GENERATE_PERLMOD tag is set to YES Doxygen will 
       
   921 # generate a Perl module file that captures the structure of 
       
   922 # the code including all documentation. Note that this 
       
   923 # feature is still experimental and incomplete at the 
       
   924 # moment.
       
   925 
       
   926 GENERATE_PERLMOD       = NO
       
   927 
       
   928 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate 
       
   929 # the necessary Makefile rules, Perl scripts and LaTeX code to be able 
       
   930 # to generate PDF and DVI output from the Perl module output.
       
   931 
       
   932 PERLMOD_LATEX          = NO
       
   933 
       
   934 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 
       
   935 # nicely formatted so it can be parsed by a human reader.  This is useful 
       
   936 # if you want to understand what is going on.  On the other hand, if this 
       
   937 # tag is set to NO the size of the Perl module output will be much smaller 
       
   938 # and Perl will parse it just the same.
       
   939 
       
   940 PERLMOD_PRETTY         = YES
       
   941 
       
   942 # The names of the make variables in the generated doxyrules.make file 
       
   943 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 
       
   944 # This is useful so different doxyrules.make files included by the same 
       
   945 # Makefile don't overwrite each other's variables.
       
   946 
       
   947 PERLMOD_MAKEVAR_PREFIX = 
       
   948 
       
   949 #---------------------------------------------------------------------------
       
   950 # Configuration options related to the preprocessor   
       
   951 #---------------------------------------------------------------------------
       
   952 
       
   953 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 
       
   954 # evaluate all C-preprocessor directives found in the sources and include 
       
   955 # files.
       
   956 
       
   957 ENABLE_PREPROCESSING   = YES
       
   958 
       
   959 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 
       
   960 # names in the source code. If set to NO (the default) only conditional 
       
   961 # compilation will be performed. Macro expansion can be done in a controlled 
       
   962 # way by setting EXPAND_ONLY_PREDEF to YES.
       
   963 
       
   964 MACRO_EXPANSION        = NO
       
   965 
       
   966 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 
       
   967 # then the macro expansion is limited to the macros specified with the 
       
   968 # PREDEFINED and EXPAND_AS_PREDEFINED tags.
       
   969 
       
   970 EXPAND_ONLY_PREDEF     = NO
       
   971 
       
   972 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 
       
   973 # in the INCLUDE_PATH (see below) will be search if a #include is found.
       
   974 
       
   975 SEARCH_INCLUDES        = YES
       
   976 
       
   977 # The INCLUDE_PATH tag can be used to specify one or more directories that 
       
   978 # contain include files that are not input files but should be processed by 
       
   979 # the preprocessor.
       
   980 
       
   981 INCLUDE_PATH           = 
       
   982 
       
   983 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
       
   984 # patterns (like *.h and *.hpp) to filter out the header-files in the 
       
   985 # directories. If left blank, the patterns specified with FILE_PATTERNS will 
       
   986 # be used.
       
   987 
       
   988 INCLUDE_FILE_PATTERNS  = 
       
   989 
       
   990 # The PREDEFINED tag can be used to specify one or more macro names that 
       
   991 # are defined before the preprocessor is started (similar to the -D option of 
       
   992 # gcc). The argument of the tag is a list of macros of the form: name 
       
   993 # or name=definition (no spaces). If the definition and the = are 
       
   994 # omitted =1 is assumed. To prevent a macro definition from being 
       
   995 # undefined via #undef or recursively expanded use the := operator 
       
   996 # instead of the = operator.
       
   997 
       
   998 PREDEFINED             = DOXYGEN
       
   999 
       
  1000 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
       
  1001 # this tag can be used to specify a list of macro names that should be expanded. 
       
  1002 # The macro definition that is found in the sources will be used. 
       
  1003 # Use the PREDEFINED tag if you want to use a different macro definition.
       
  1004 
       
  1005 EXPAND_AS_DEFINED      = 
       
  1006 
       
  1007 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 
       
  1008 # doxygen's preprocessor will remove all function-like macros that are alone 
       
  1009 # on a line, have an all uppercase name, and do not end with a semicolon. Such 
       
  1010 # function macros are typically used for boiler-plate code, and will confuse 
       
  1011 # the parser if not removed.
       
  1012 
       
  1013 SKIP_FUNCTION_MACROS   = YES
       
  1014 
       
  1015 #---------------------------------------------------------------------------
       
  1016 # Configuration::additions related to external references   
       
  1017 #---------------------------------------------------------------------------
       
  1018 
       
  1019 # The TAGFILES option can be used to specify one or more tagfiles. 
       
  1020 # Optionally an initial location of the external documentation 
       
  1021 # can be added for each tagfile. The format of a tag file without 
       
  1022 # this location is as follows: 
       
  1023 #   TAGFILES = file1 file2 ... 
       
  1024 # Adding location for the tag files is done as follows: 
       
  1025 #   TAGFILES = file1=loc1 "file2 = loc2" ... 
       
  1026 # where "loc1" and "loc2" can be relative or absolute paths or 
       
  1027 # URLs. If a location is present for each tag, the installdox tool 
       
  1028 # does not have to be run to correct the links.
       
  1029 # Note that each tag file must have a unique name
       
  1030 # (where the name does NOT include the path)
       
  1031 # If a tag file is not located in the directory in which doxygen 
       
  1032 # is run, you must also specify the path to the tagfile here.
       
  1033 
       
  1034 TAGFILES               = "@abs_top_srcdir@/doc/libstdc++.tag = http://gcc.gnu.org/onlinedocs/libstdc++/latest-doxygen/"
       
  1035 
       
  1036 # When a file name is specified after GENERATE_TAGFILE, doxygen will create 
       
  1037 # a tag file that is based on the input files it reads.
       
  1038 
       
  1039 GENERATE_TAGFILE       = html/lemon.tag
       
  1040 
       
  1041 # If the ALLEXTERNALS tag is set to YES all external classes will be listed 
       
  1042 # in the class index. If set to NO only the inherited external classes 
       
  1043 # will be listed.
       
  1044 
       
  1045 ALLEXTERNALS           = NO
       
  1046 
       
  1047 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 
       
  1048 # in the modules index. If set to NO, only the current project's groups will 
       
  1049 # be listed.
       
  1050 
       
  1051 EXTERNAL_GROUPS        = NO
       
  1052 
       
  1053 # The PERL_PATH should be the absolute path and name of the perl script 
       
  1054 # interpreter (i.e. the result of `which perl').
       
  1055 
       
  1056 PERL_PATH              = /usr/bin/perl
       
  1057 
       
  1058 #---------------------------------------------------------------------------
       
  1059 # Configuration options related to the dot tool   
       
  1060 #---------------------------------------------------------------------------
       
  1061 
       
  1062 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
       
  1063 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base 
       
  1064 # or super classes. Setting the tag to NO turns the diagrams off. Note that 
       
  1065 # this option is superseded by the HAVE_DOT option below. This is only a 
       
  1066 # fallback. It is recommended to install and use dot, since it yields more 
       
  1067 # powerful graphs.
       
  1068 
       
  1069 CLASS_DIAGRAMS         = NO
       
  1070 
       
  1071 # If set to YES, the inheritance and collaboration graphs will hide 
       
  1072 # inheritance and usage relations if the target is undocumented 
       
  1073 # or is not a class.
       
  1074 
       
  1075 HIDE_UNDOC_RELATIONS   = YES
       
  1076 
       
  1077 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
       
  1078 # available from the path. This tool is part of Graphviz, a graph visualization 
       
  1079 # toolkit from AT&T and Lucent Bell Labs. The other options in this section 
       
  1080 # have no effect if this option is set to NO (the default)
       
  1081 
       
  1082 HAVE_DOT               = YES
       
  1083 
       
  1084 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
       
  1085 # will generate a graph for each documented class showing the direct and 
       
  1086 # indirect inheritance relations. Setting this tag to YES will force the 
       
  1087 # the CLASS_DIAGRAMS tag to NO.
       
  1088 
       
  1089 CLASS_GRAPH            = YES
       
  1090 
       
  1091 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 
       
  1092 # will generate a graph for each documented class showing the direct and 
       
  1093 # indirect implementation dependencies (inheritance, containment, and 
       
  1094 # class references variables) of the class with other documented classes.
       
  1095 
       
  1096 COLLABORATION_GRAPH    = NO
       
  1097 
       
  1098 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen 
       
  1099 # will generate a graph for groups, showing the direct groups dependencies
       
  1100 
       
  1101 GROUP_GRAPHS           = NO
       
  1102 
       
  1103 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and 
       
  1104 # collaboration diagrams in a style similar to the OMG's Unified Modeling 
       
  1105 # Language.
       
  1106 
       
  1107 UML_LOOK               = NO
       
  1108 
       
  1109 # If set to YES, the inheritance and collaboration graphs will show the 
       
  1110 # relations between templates and their instances.
       
  1111 
       
  1112 TEMPLATE_RELATIONS     = NO
       
  1113 
       
  1114 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 
       
  1115 # tags are set to YES then doxygen will generate a graph for each documented 
       
  1116 # file showing the direct and indirect include dependencies of the file with 
       
  1117 # other documented files.
       
  1118 
       
  1119 INCLUDE_GRAPH          = NO
       
  1120 
       
  1121 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 
       
  1122 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each 
       
  1123 # documented header file showing the documented files that directly or 
       
  1124 # indirectly include this file.
       
  1125 
       
  1126 INCLUDED_BY_GRAPH      = NO
       
  1127 
       
  1128 # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will 
       
  1129 # generate a call dependency graph for every global function or class method. 
       
  1130 # Note that enabling this option will significantly increase the time of a run. 
       
  1131 # So in most cases it will be better to enable call graphs for selected 
       
  1132 # functions only using the \callgraph command.
       
  1133 
       
  1134 CALL_GRAPH             = NO
       
  1135 
       
  1136 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 
       
  1137 # will graphical hierarchy of all classes instead of a textual one.
       
  1138 
       
  1139 GRAPHICAL_HIERARCHY    = NO
       
  1140 
       
  1141 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES 
       
  1142 # then doxygen will show the dependencies a directory has on other directories 
       
  1143 # in a graphical way. The dependency relations are determined by the #include
       
  1144 # relations between the files in the directories.
       
  1145 
       
  1146 DIRECTORY_GRAPH        = NO
       
  1147 
       
  1148 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
       
  1149 # generated by dot. Possible values are png, jpg, or gif
       
  1150 # If left blank png will be used.
       
  1151 
       
  1152 DOT_IMAGE_FORMAT       = png
       
  1153 
       
  1154 # The tag DOT_PATH can be used to specify the path where the dot tool can be 
       
  1155 # found. If left blank, it is assumed the dot tool can be found in the path.
       
  1156 
       
  1157 DOT_PATH               = 
       
  1158 
       
  1159 # The DOTFILE_DIRS tag can be used to specify one or more directories that 
       
  1160 # contain dot files that are included in the documentation (see the 
       
  1161 # \dotfile command).
       
  1162 
       
  1163 DOTFILE_DIRS           = 
       
  1164 
       
  1165 # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width 
       
  1166 # (in pixels) of the graphs generated by dot. If a graph becomes larger than 
       
  1167 # this value, doxygen will try to truncate the graph, so that it fits within 
       
  1168 # the specified constraint. Beware that most browsers cannot cope with very 
       
  1169 # large images.
       
  1170 
       
  1171 MAX_DOT_GRAPH_WIDTH    = 1024
       
  1172 
       
  1173 # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height 
       
  1174 # (in pixels) of the graphs generated by dot. If a graph becomes larger than 
       
  1175 # this value, doxygen will try to truncate the graph, so that it fits within 
       
  1176 # the specified constraint. Beware that most browsers cannot cope with very 
       
  1177 # large images.
       
  1178 
       
  1179 MAX_DOT_GRAPH_HEIGHT   = 1024
       
  1180 
       
  1181 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
       
  1182 # graphs generated by dot. A depth value of 3 means that only nodes reachable 
       
  1183 # from the root by following a path via at most 3 edges will be shown. Nodes 
       
  1184 # that lay further from the root node will be omitted. Note that setting this 
       
  1185 # option to 1 or 2 may greatly reduce the computation time needed for large 
       
  1186 # code bases. Also note that a graph may be further truncated if the graph's 
       
  1187 # image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH 
       
  1188 # and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), 
       
  1189 # the graph is not depth-constrained.
       
  1190 
       
  1191 MAX_DOT_GRAPH_DEPTH    = 0
       
  1192 
       
  1193 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent 
       
  1194 # background. This is disabled by default, which results in a white background. 
       
  1195 # Warning: Depending on the platform used, enabling this option may lead to 
       
  1196 # badly anti-aliased labels on the edges of a graph (i.e. they become hard to 
       
  1197 # read).
       
  1198 
       
  1199 DOT_TRANSPARENT        = NO
       
  1200 
       
  1201 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output 
       
  1202 # files in one run (i.e. multiple -o and -T options on the command line). This 
       
  1203 # makes dot run faster, but since only newer versions of dot (>1.8.10) 
       
  1204 # support this, this feature is disabled by default.
       
  1205 
       
  1206 DOT_MULTI_TARGETS      = NO
       
  1207 
       
  1208 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 
       
  1209 # generate a legend page explaining the meaning of the various boxes and 
       
  1210 # arrows in the dot generated graphs.
       
  1211 
       
  1212 GENERATE_LEGEND        = YES
       
  1213 
       
  1214 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 
       
  1215 # remove the intermediate dot files that are used to generate 
       
  1216 # the various graphs.
       
  1217 
       
  1218 DOT_CLEANUP            = YES
       
  1219 
       
  1220 #---------------------------------------------------------------------------
       
  1221 # Configuration::additions related to the search engine   
       
  1222 #---------------------------------------------------------------------------
       
  1223 
       
  1224 # The SEARCHENGINE tag specifies whether or not a search engine should be 
       
  1225 # used. If set to NO the values of all tags below this one will be ignored.
       
  1226 
       
  1227 SEARCHENGINE           = NO