/* -*- mode: C++; indent-tabs-mode: nil; -*-

 *

 * This file is a part of LEMON, a generic C++ optimization library.

 *

 * Copyright (C) 2003-2013

 * Egervary Jeno Kombinatorikus Optimalizalasi Kutatocsoport

 * (Egervary Research Group on Combinatorial Optimization, EGRES).

 *

 * Permission to use, modify and distribute this software is granted

 * provided that this copyright notice appears in all copies. For

 * precise terms see the accompanying LICENSE file.

 *

 * This software is provided "AS IS" with no warranty of any kind,

 * express or implied, and with no claim as to its suitability for any

 * purpose.

 *

 */

#ifndef LEMON_CAPACITY_SCALING_H

#define LEMON_CAPACITY_SCALING_H

/// \ingroup min_cost_flow_algs

///

/// \file

/// \brief Capacity Scaling algorithm for finding a minimum cost flow.

#include <vector>

#include <limits>

#include <lemon/core.h>

#include <lemon/bin_heap.h>

namespace lemon {

  /// \brief Default traits class of CapacityScaling algorithm.

  ///

  /// Default traits class of CapacityScaling algorithm.

  /// \tparam GR Digraph type.

  /// \tparam V The number type used for flow amounts, capacity bounds

  /// and supply values. By default it is \c int.

  /// \tparam C The number type used for costs and potentials.

  /// By default it is the same as \c V.

  template <typename GR, typename V = int, typename C = V>

  struct CapacityScalingDefaultTraits

  {

    /// The type of the digraph

    typedef GR Digraph;

    /// The type of the flow amounts, capacity bounds and supply values

    typedef V Value;

    /// The type of the arc costs

    typedef C Cost;

    /// \brief The type of the heap used for internal Dijkstra computations.

    ///

    /// The type of the heap used for internal Dijkstra computations.

    /// It must conform to the \ref lemon::concepts::Heap "Heap" concept,

    /// its priority type must be \c Cost and its cross reference type

    /// must be \ref RangeMap "RangeMap<int>".

    typedef BinHeap<Cost, RangeMap<int> > Heap;

  };

  /// \addtogroup min_cost_flow_algs

  /// @{

  /// \brief Implementation of the Capacity Scaling algorithm for

  /// finding a \ref min_cost_flow "minimum cost flow".

  ///

  /// \ref CapacityScaling implements the capacity scaling version

  /// of the successive shortest path algorithm for finding a

  /// \ref min_cost_flow "minimum cost flow" \cite amo93networkflows,

  /// \cite edmondskarp72theoretical. It is an efficient dual

  /// solution method, which runs in polynomial time

  /// \f$O(m\log U (n+m)\log n)\f$, where <i>U</i> denotes the maximum

  /// of node supply and arc capacity values.

  ///

  /// This algorithm is typically slower than \ref CostScaling and

  /// \ref NetworkSimplex, but in special cases, it can be more

  /// efficient than them.

  /// (For more information, see \ref min_cost_flow_algs "the module page".)

  ///

  /// Most of the parameters of the problem (except for the digraph)

  /// can be given using separate functions, and the algorithm can be

  /// executed using the \ref run() function. If some parameters are not

  /// specified, then default values will be used.

  ///

  /// \tparam GR The digraph type the algorithm runs on.

  /// \tparam V The number type used for flow amounts, capacity bounds

  /// and supply values in the algorithm. By default, it is \c int.

  /// \tparam C The number type used for costs and potentials in the

  /// algorithm. By default, it is the same as \c V.

  /// \tparam TR The traits class that defines various types used by the

  /// algorithm. By default, it is \ref CapacityScalingDefaultTraits

  /// "CapacityScalingDefaultTraits<GR, V, C>".

  /// In most cases, this parameter should not be set directly,

  /// consider to use the named template parameters instead.

  ///

  /// \warning Both \c V and \c C must be signed number types.

  /// \warning Capacity bounds and supply values must be integer, but

  /// arc costs can be arbitrary real numbers.

  /// \warning This algorithm does not support negative costs for

  /// arcs having infinite upper bound.

#ifdef DOXYGEN

  template <typename GR, typename V, typename C, typename TR>

#else

  template < typename GR, typename V = int, typename C = V,

             typename TR = CapacityScalingDefaultTraits<GR, V, C> >

#endif

  class CapacityScaling

  {

  public:

    /// The type of the digraph

    typedef typename TR::Digraph Digraph;

    /// The type of the flow amounts, capacity bounds and supply values

    typedef typename TR::Value Value;

    /// The type of the arc costs

    typedef typename TR::Cost Cost;

    /// The type of the heap used for internal Dijkstra computations

    typedef typename TR::Heap Heap;

    /// \brief The \ref lemon::CapacityScalingDefaultTraits "traits class"

    /// of the algorithm

    typedef TR Traits;

  public:

    /// \brief Problem type constants for the \c run() function.

    ///

    /// Enum type containing the problem type constants that can be

    /// returned by the \ref run() function of the algorithm.

    enum ProblemType {

      /// The problem has no feasible solution (flow).

      INFEASIBLE,

      /// The problem has optimal solution (i.e. it is feasible and

      /// bounded), and the algorithm has found optimal flow and node

      /// potentials (primal and dual solutions).

      OPTIMAL,

      /// The digraph contains an arc of negative cost and infinite

      /// upper bound. It means that the objective function is unbounded

      /// on that arc, however, note that it could actually be bounded

      /// over the feasible flows, but this algroithm cannot handle

      /// these cases.

      UNBOUNDED

    };

  private:

    TEMPLATE_DIGRAPH_TYPEDEFS(GR);

    typedef std::vector<int> IntVector;

    typedef std::vector<Value> ValueVector;

    typedef std::vector<Cost> CostVector;

    typedef std::vector<char> BoolVector;

    // Note: vector<char> is used instead of vector<bool> for efficiency reasons

  private:

    // Data related to the underlying digraph

    const GR &_graph;

    int _node_num;

    int _arc_num;

    int _res_arc_num;

    int _root;

    // Parameters of the problem

    bool _has_lower;

    Value _sum_supply;

    // Data structures for storing the digraph

    IntNodeMap _node_id;

    IntArcMap _arc_idf;

    IntArcMap _arc_idb;

    IntVector _first_out;

    BoolVector _forward;

    IntVector _source;

    IntVector _target;

    IntVector _reverse;

    // Node and arc data

    ValueVector _lower;

    ValueVector _upper;

    CostVector _cost;

    ValueVector _supply;

    ValueVector _res_cap;

    CostVector _pi;

    ValueVector _excess;

    IntVector _excess_nodes;

    IntVector _deficit_nodes;

    Value _delta;

    int _factor;

    IntVector _pred;

  public:

    /// \brief Constant for infinite upper bounds (capacities).

    ///

    /// Constant for infinite upper bounds (capacities).

    /// It is \c std::numeric_limits<Value>::infinity() if available,

    /// \c std::numeric_limits<Value>::max() otherwise.

    const Value INF;

  private:

    // Special implementation of the Dijkstra algorithm for finding

    // shortest paths in the residual network of the digraph with

    // respect to the reduced arc costs and modifying the node

    // potentials according to the found distance labels.

    class ResidualDijkstra

    {

    private:

      int _node_num;

      bool _geq;

      const IntVector &_first_out;

      const IntVector &_target;

      const CostVector &_cost;

      const ValueVector &_res_cap;

      const ValueVector &_excess;

      CostVector &_pi;

      IntVector &_pred;

      IntVector _proc_nodes;

      CostVector _dist;

    public:

      ResidualDijkstra(CapacityScaling& cs) :

        _node_num(cs._node_num), _geq(cs._sum_supply < 0),

        _first_out(cs._first_out), _target(cs._target), _cost(cs._cost),

        _res_cap(cs._res_cap), _excess(cs._excess), _pi(cs._pi),

        _pred(cs._pred), _dist(cs._node_num)

      {}

      int run(int s, Value delta = 1) {

        RangeMap<int> heap_cross_ref(_node_num, Heap::PRE_HEAP);

        Heap heap(heap_cross_ref);

        heap.push(s, 0);

        _pred[s] = -1;

        _proc_nodes.clear();

        // Process nodes

        while (!heap.empty() && _excess[heap.top()] > -delta) {

          int u = heap.top(), v;

          Cost d = heap.prio() + _pi[u], dn;

          _dist[u] = heap.prio();

          _proc_nodes.push_back(u);

          heap.pop();

          // Traverse outgoing residual arcs

          int last_out = _geq ? _first_out[u+1] : _first_out[u+1] - 1;

          for (int a = _first_out[u]; a != last_out; ++a) {

            if (_res_cap[a] < delta) continue;

            v = _target[a];

            switch (heap.state(v)) {

              case Heap::PRE_HEAP:

                heap.push(v, d + _cost[a] - _pi[v]);

                _pred[v] = a;

                break;

              case Heap::IN_HEAP:

                dn = d + _cost[a] - _pi[v];

                if (dn < heap[v]) {

                  heap.decrease(v, dn);

                  _pred[v] = a;

                }

                break;

              case Heap::POST_HEAP:

                break;

            }

          }

        }

        if (heap.empty()) return -1;

        // Update potentials of processed nodes

        int t = heap.top();

        Cost dt = heap.prio();

        for (int i = 0; i < int(_proc_nodes.size()); ++i) {

          _pi[_proc_nodes[i]] += _dist[_proc_nodes[i]] - dt;

        }

        return t;

      }

    }; //class ResidualDijkstra

  public:

    /// \name Named Template Parameters

    /// @{

    template <typename T>

    struct SetHeapTraits : public Traits {

      typedef T Heap;

    };

    /// \brief \ref named-templ-param "Named parameter" for setting

    /// \c Heap type.

    ///

    /// \ref named-templ-param "Named parameter" for setting \c Heap

    /// type, which is used for internal Dijkstra computations.

    /// It must conform to the \ref lemon::concepts::Heap "Heap" concept,

    /// its priority type must be \c Cost and its cross reference type

    /// must be \ref RangeMap "RangeMap<int>".

    template <typename T>

    struct SetHeap

      : public CapacityScaling<GR, V, C, SetHeapTraits<T> > {

      typedef  CapacityScaling<GR, V, C, SetHeapTraits<T> > Create;

    };

    /// @}

  protected:

    CapacityScaling() {}

  public:

    /// \brief Constructor.

    ///

    /// The constructor of the class.

    ///

    /// \param graph The digraph the algorithm runs on.

    CapacityScaling(const GR& graph) :

      _graph(graph), _node_id(graph), _arc_idf(graph), _arc_idb(graph),

      INF(std::numeric_limits<Value>::has_infinity ?

          std::numeric_limits<Value>::infinity() :

          std::numeric_limits<Value>::max())

    {

      // Check the number types

      LEMON_ASSERT(std::numeric_limits<Value>::is_signed,

        "The flow type of CapacityScaling must be signed");

      LEMON_ASSERT(std::numeric_limits<Cost>::is_signed,

        "The cost type of CapacityScaling must be signed");

      // Reset data structures

      reset();

    }

    /// \name Parameters

    /// The parameters of the algorithm can be specified using these

    /// functions.

    /// @{

    /// \brief Set the lower bounds on the arcs.

    ///

    /// This function sets the lower bounds on the arcs.

    /// If it is not used before calling \ref run(), the lower bounds

    /// will be set to zero on all arcs.

    ///

    /// \param map An arc map storing the lower bounds.

    /// Its \c Value type must be convertible to the \c Value type

    /// of the algorithm.

    ///

    /// \return <tt>(*this)</tt>

    template <typename LowerMap>

    CapacityScaling& lowerMap(const LowerMap& map) {

      _has_lower = true;

      for (ArcIt a(_graph); a != INVALID; ++a) {

        _lower[_arc_idf[a]] = map[a];

      }

      return *this;

    }

    /// \brief Set the upper bounds (capacities) on the arcs.

    ///

    /// This function sets the upper bounds (capacities) on the arcs.

    /// If it is not used before calling \ref run(), the upper bounds

    /// will be set to \ref INF on all arcs (i.e. the flow value will be

    /// unbounded from above).

    ///

    /// \param map An arc map storing the upper bounds.

    /// Its \c Value type must be convertible to the \c Value type

    /// of the algorithm.

    ///

    /// \return <tt>(*this)</tt>

    template<typename UpperMap>

    CapacityScaling& upperMap(const UpperMap& map) {

      for (ArcIt a(_graph); a != INVALID; ++a) {

        _upper[_arc_idf[a]] = map[a];

      }

      return *this;

    }

    /// \brief Set the costs of the arcs.

    ///

    /// This function sets the costs of the arcs.

    /// If it is not used before calling \ref run(), the costs

    /// will be set to \c 1 on all arcs.

    ///

    /// \param map An arc map storing the costs.

    /// Its \c Value type must be convertible to the \c Cost type

    /// of the algorithm.

    ///

    /// \return <tt>(*this)</tt>

    template<typename CostMap>

    CapacityScaling& costMap(const CostMap& map) {

      for (ArcIt a(_graph); a != INVALID; ++a) {

        _cost[_arc_idf[a]] =  map[a];

        _cost[_arc_idb[a]] = -map[a];

      }

      return *this;

    }

    /// \brief Set the supply values of the nodes.

    ///

    /// This function sets the supply values of the nodes.

    /// If neither this function nor \ref stSupply() is used before

    /// calling \ref run(), the supply of each node will be set to zero.

    ///

    /// \param map A node map storing the supply values.

    /// Its \c Value type must be convertible to the \c Value type

    /// of the algorithm.

    ///

    /// \return <tt>(*this)</tt>

    template<typename SupplyMap>

    CapacityScaling& supplyMap(const SupplyMap& map) {

      for (NodeIt n(_graph); n != INVALID; ++n) {

        _supply[_node_id[n]] = map[n];

      }

      return *this;

    }

    /// \brief Set single source and target nodes and a supply value.

    ///

    /// This function sets a single source node and a single target node

    /// and the required flow value.

    /// If neither this function nor \ref supplyMap() is used before

    /// calling \ref run(), the supply of each node will be set to zero.

    ///

    /// Using this function has the same effect as using \ref supplyMap()

    /// with a map in which \c k is assigned to \c s, \c -k is

    /// assigned to \c t and all other nodes have zero supply value.

    ///

    /// \param s The source node.

    /// \param t The target node.

    /// \param k The required amount of flow from node \c s to node \c t

    /// (i.e. the supply of \c s and the demand of \c t).

    ///

    /// \return <tt>(*this)</tt>

    CapacityScaling& stSupply(const Node& s, const Node& t, Value k) {

      for (int i = 0; i != _node_num; ++i) {

        _supply[i] = 0;

      }

      _supply[_node_id[s]] =  k;

      _supply[_node_id[t]] = -k;

      return *this;

    }

    /// @}

    /// \name Execution control

    /// The algorithm can be executed using \ref run().

    /// @{

    /// \brief Run the algorithm.

    ///

    /// This function runs the algorithm.

    /// The paramters can be specified using functions \ref lowerMap(),

    /// \ref upperMap(), \ref costMap(), \ref supplyMap(), \ref stSupply().

    /// For example,

    /// \code

    ///   CapacityScaling<ListDigraph> cs(graph);

    ///   cs.lowerMap(lower).upperMap(upper).costMap(cost)

    ///     .supplyMap(sup).run();

    /// \endcode

    ///

    /// This function can be called more than once. All the given parameters

    /// are kept for the next call, unless \ref resetParams() or \ref reset()

    /// is used, thus only the modified parameters have to be set again.

    /// If the underlying digraph was also modified after the construction

    /// of the class (or the last \ref reset() call), then the \ref reset()

    /// function must be called.

    ///

    /// \param factor The capacity scaling factor. It must be larger than

    /// one to use scaling. If it is less or equal to one, then scaling

    /// will be disabled.

    ///

    /// \return \c INFEASIBLE if no feasible flow exists,

    /// \n \c OPTIMAL if the problem has optimal solution

    /// (i.e. it is feasible and bounded), and the algorithm has found

    /// optimal flow and node potentials (primal and dual solutions),

    /// \n \c UNBOUNDED if the digraph contains an arc of negative cost

    /// and infinite upper bound. It means that the objective function

    /// is unbounded on that arc, however, note that it could actually be

    /// bounded over the feasible flows, but this algroithm cannot handle

    /// these cases.

    ///

    /// \see ProblemType

    /// \see resetParams(), reset()

    ProblemType run(int factor = 4) {

      _factor = factor;

      ProblemType pt = init();

      if (pt != OPTIMAL) return pt;

      return start();

    }

    /// \brief Reset all the parameters that have been given before.

    ///

    /// This function resets all the paramaters that have been given

    /// before using functions \ref lowerMap(), \ref upperMap(),

    /// \ref costMap(), \ref supplyMap(), \ref stSupply().

    ///

    /// It is useful for multiple \ref run() calls. Basically, all the given

    /// parameters are kept for the next \ref run() call, unless

    /// \ref resetParams() or \ref reset() is used.

    /// If the underlying digraph was also modified after the construction

    /// of the class or the last \ref reset() call, then the \ref reset()

    /// function must be used, otherwise \ref resetParams() is sufficient.

    ///

    /// For example,

    /// \code

    ///   CapacityScaling<ListDigraph> cs(graph);

    ///

    ///   // First run

    ///   cs.lowerMap(lower).upperMap(upper).costMap(cost)

    ///     .supplyMap(sup).run();

    ///

    ///   // Run again with modified cost map (resetParams() is not called,

    ///   // so only the cost map have to be set again)

    ///   cost[e] += 100;

    ///   cs.costMap(cost).run();

    ///

    ///   // Run again from scratch using resetParams()

    ///   // (the lower bounds will be set to zero on all arcs)

    ///   cs.resetParams();

    ///   cs.upperMap(capacity).costMap(cost)

    ///     .supplyMap(sup).run();

    /// \endcode

    ///

    /// \return <tt>(*this)</tt>

    ///

    /// \see reset(), run()

    CapacityScaling& resetParams() {

      for (int i = 0; i != _node_num; ++i) {

        _supply[i] = 0;

      }

      for (int j = 0; j != _res_arc_num; ++j) {

        _lower[j] = 0;

        _upper[j] = INF;

        _cost[j] = _forward[j] ? 1 : -1;

      }

      _has_lower = false;

      return *this;

    }

    /// \brief Reset the internal data structures and all the parameters

    /// that have been given before.

    ///

    /// This function resets the internal data structures and all the

    /// paramaters that have been given before using functions \ref lowerMap(),

    /// \ref upperMap(), \ref costMap(), \ref supplyMap(), \ref stSupply().

    ///

    /// It is useful for multiple \ref run() calls. Basically, all the given

    /// parameters are kept for the next \ref run() call, unless

    /// \ref resetParams() or \ref reset() is used.

    /// If the underlying digraph was also modified after the construction

    /// of the class or the last \ref reset() call, then the \ref reset()

    /// function must be used, otherwise \ref resetParams() is sufficient.

    ///

    /// See \ref resetParams() for examples.

    ///

    /// \return <tt>(*this)</tt>

    ///

    /// \see resetParams(), run()

    CapacityScaling& reset() {

      // Resize vectors

      _node_num = countNodes(_graph);

      _arc_num = countArcs(_graph);

      _res_arc_num = 2 * (_arc_num + _node_num);

      _root = _node_num;

      ++_node_num;

      _first_out.resize(_node_num + 1);

      _forward.resize(_res_arc_num);

      _source.resize(_res_arc_num);

      _target.resize(_res_arc_num);

      _reverse.resize(_res_arc_num);

      _lower.resize(_res_arc_num);

      _upper.resize(_res_arc_num);

      _cost.resize(_res_arc_num);

      _supply.resize(_node_num);

      _res_cap.resize(_res_arc_num);

      _pi.resize(_node_num);

      _excess.resize(_node_num);

      _pred.resize(_node_num);

      // Copy the graph

      int i = 0, j = 0, k = 2 * _arc_num + _node_num - 1;

      for (NodeIt n(_graph); n != INVALID; ++n, ++i) {

        _node_id[n] = i;

      }

      i = 0;

      for (NodeIt n(_graph); n != INVALID; ++n, ++i) {

        _first_out[i] = j;

        for (OutArcIt a(_graph, n); a != INVALID; ++a, ++j) {

          _arc_idf[a] = j;

          _forward[j] = true;

          _source[j] = i;

          _target[j] = _node_id[_graph.runningNode(a)];

        }

        for (InArcIt a(_graph, n); a != INVALID; ++a, ++j) {

          _arc_idb[a] = j;

          _forward[j] = false;

          _source[j] = i;

          _target[j] = _node_id[_graph.runningNode(a)];

        }

        _forward[j] = false;

        _source[j] = i;

        _target[j] = _root;

        _reverse[j] = k;

        _forward[k] = true;

        _source[k] = _root;

        _target[k] = i;

        _reverse[k] = j;

        ++j; ++k;

      }

      _first_out[i] = j;

      _first_out[_node_num] = k;

      for (ArcIt a(_graph); a != INVALID; ++a) {

        int fi = _arc_idf[a];

        int bi = _arc_idb[a];

        _reverse[fi] = bi;

        _reverse[bi] = fi;

      }

      // Reset parameters

      resetParams();

      return *this;

    }

    /// @}

    /// \name Query Functions

    /// The results of the algorithm can be obtained using these

    /// functions.\n

    /// The \ref run() function must be called before using them.

    /// @{

    /// \brief Return the total cost of the found flow.

    ///

    /// This function returns the total cost of the found flow.

    /// Its complexity is O(m).

    ///

    /// \note The return type of the function can be specified as a

    /// template parameter. For example,

    /// \code

    ///   cs.totalCost<double>();

    /// \endcode

    /// It is useful if the total cost cannot be stored in the \c Cost

    /// type of the algorithm, which is the default return type of the

    /// function.

    ///

    /// \pre \ref run() must be called before using this function.

    template <typename Number>

    Number totalCost() const {

      Number c = 0;

      for (ArcIt a(_graph); a != INVALID; ++a) {

        int i = _arc_idb[a];

        c += static_cast<Number>(_res_cap[i]) *

             (-static_cast<Number>(_cost[i]));

      }

      return c;

    }

#ifndef DOXYGEN

    Cost totalCost() const {

      return totalCost<Cost>();

    }

#endif

    /// \brief Return the flow on the given arc.

    ///

    /// This function returns the flow on the given arc.

    ///

    /// \pre \ref run() must be called before using this function.

    Value flow(const Arc& a) const {

      return _res_cap[_arc_idb[a]];

    }

    /// \brief Copy the flow values (the primal solution) into the

    /// given map.

    ///

    /// This function copies the flow value on each arc into the given

    /// map. The \c Value type of the algorithm must be convertible to

    /// the \c Value type of the map.

    ///

    /// \pre \ref run() must be called before using this function.

    template <typename FlowMap>

    void flowMap(FlowMap &map) const {

      for (ArcIt a(_graph); a != INVALID; ++a) {

        map.set(a, _res_cap[_arc_idb[a]]);

      }

    }

    /// \brief Return the potential (dual value) of the given node.

    ///

    /// This function returns the potential (dual value) of the

    /// given node.

    ///

    /// \pre \ref run() must be called before using this function.

    Cost potential(const Node& n) const {

      return _pi[_node_id[n]];

    }

    /// \brief Copy the potential values (the dual solution) into the

    /// given map.

    ///

    /// This function copies the potential (dual value) of each node

    /// into the given map.

    /// The \c Cost type of the algorithm must be convertible to the

    /// \c Value type of the map.

    ///

    /// \pre \ref run() must be called before using this function.

    template <typename PotentialMap>

    void potentialMap(PotentialMap &map) const {

      for (NodeIt n(_graph); n != INVALID; ++n) {

        map.set(n, _pi[_node_id[n]]);

      }

    }

    /// @}

  private:

    // Initialize the algorithm

    ProblemType init() {

      if (_node_num <= 1) return INFEASIBLE;

      // Check the sum of supply values

      _sum_supply = 0;

      for (int i = 0; i != _root; ++i) {

        _sum_supply += _supply[i];

      }

      if (_sum_supply > 0) return INFEASIBLE;

      // Check lower and upper bounds

      LEMON_DEBUG(checkBoundMaps(),

          "Upper bounds must be greater or equal to the lower bounds");

      // Initialize vectors

      for (int i = 0; i != _root; ++i) {

        _pi[i] = 0;

        _excess[i] = _supply[i];

      }

      // Remove non-zero lower bounds

      const Value MAX = std::numeric_limits<Value>::max();

      int last_out;

      if (_has_lower) {

        for (int i = 0; i != _root; ++i) {

          last_out = _first_out[i+1];

          for (int j = _first_out[i]; j != last_out; ++j) {

            if (_forward[j]) {

              Value c = _lower[j];

              if (c >= 0) {

                _res_cap[j] = _upper[j] < MAX ? _upper[j] - c : INF;

              } else {

                _res_cap[j] = _upper[j] < MAX + c ? _upper[j] - c : INF;

              }

              _excess[i] -= c;

              _excess[_target[j]] += c;

            } else {

              _res_cap[j] = 0;

            }

          }

        }

      } else {

        for (int j = 0; j != _res_arc_num; ++j) {

          _res_cap[j] = _forward[j] ? _upper[j] : 0;

        }

      }

      // Handle negative costs

      for (int i = 0; i != _root; ++i) {

        last_out = _first_out[i+1] - 1;

        for (int j = _first_out[i]; j != last_out; ++j) {

          Value rc = _res_cap[j];

          if (_cost[j] < 0 && rc > 0) {

            if (rc >= MAX) return UNBOUNDED;

            _excess[i] -= rc;

            _excess[_target[j]] += rc;

            _res_cap[j] = 0;

            _res_cap[_reverse[j]] += rc;

          }

        }

      }

      // Handle GEQ supply type

      if (_sum_supply < 0) {

        _pi[_root] = 0;

        _excess[_root] = -_sum_supply;

        for (int a = _first_out[_root]; a != _res_arc_num; ++a) {

          int ra = _reverse[a];

          _res_cap[a] = -_sum_supply + 1;

          _res_cap[ra] = 0;

          _cost[a] = 0;

          _cost[ra] = 0;

        }

      } else {

        _pi[_root] = 0;

        _excess[_root] = 0;

        for (int a = _first_out[_root]; a != _res_arc_num; ++a) {

          int ra = _reverse[a];

          _res_cap[a] = 1;

          _res_cap[ra] = 0;

          _cost[a] = 0;

          _cost[ra] = 0;

        }

      }

      // Initialize delta value

      if (_factor > 1) {

        // With scaling

        Value max_sup = 0, max_dem = 0, max_cap = 0;

        for (int i = 0; i != _root; ++i) {

          Value ex = _excess[i];

          if ( ex > max_sup) max_sup =  ex;

          if (-ex > max_dem) max_dem = -ex;

          int last_out = _first_out[i+1] - 1;

          for (int j = _first_out[i]; j != last_out; ++j) {

            if (_res_cap[j] > max_cap) max_cap = _res_cap[j];

          }

        }

        max_sup = std::min(std::min(max_sup, max_dem), max_cap);

        for (_delta = 1; 2 * _delta <= max_sup; _delta *= 2) ;

      } else {

        // Without scaling

        _delta = 1;

      }

      return OPTIMAL;

    }

    // Check if the upper bound is greater than or equal to the lower bound

    // on each forward arc.

    bool checkBoundMaps() {

      for (int j = 0; j != _res_arc_num; ++j) {

        if (_forward[j] && _upper[j] < _lower[j]) return false;

      }

      return true;

    }

    ProblemType start() {

      // Execute the algorithm

      ProblemType pt;

      if (_delta > 1)

        pt = startWithScaling();

      else

        pt = startWithoutScaling();

      // Handle non-zero lower bounds

      if (_has_lower) {

        int limit = _first_out[_root];

        for (int j = 0; j != limit; ++j) {

          if (_forward[j]) _res_cap[_reverse[j]] += _lower[j];

        }

      }

      // Shift potentials if necessary

      Cost pr = _pi[_root];

      if (_sum_supply < 0 || pr > 0) {

        for (int i = 0; i != _node_num; ++i) {

          _pi[i] -= pr;

        }

      }

      return pt;

    }

    // Execute the capacity scaling algorithm

    ProblemType startWithScaling() {

      // Perform capacity scaling phases

      int s, t;

      ResidualDijkstra _dijkstra(*this);

      while (true) {

        // Saturate all arcs not satisfying the optimality condition

        int last_out;

        for (int u = 0; u != _node_num; ++u) {

          last_out = _sum_supply < 0 ?

            _first_out[u+1] : _first_out[u+1] - 1;

          for (int a = _first_out[u]; a != last_out; ++a) {

            int v = _target[a];

            Cost c = _cost[a] + _pi[u] - _pi[v];

            Value rc = _res_cap[a];

            if (c < 0 && rc >= _delta) {

              _excess[u] -= rc;

              _excess[v] += rc;

              _res_cap[a] = 0;

              _res_cap[_reverse[a]] += rc;

            }

          }

        }

        // Find excess nodes and deficit nodes

        _excess_nodes.clear();

        _deficit_nodes.clear();

        for (int u = 0; u != _node_num; ++u) {

          Value ex = _excess[u];

          if (ex >=  _delta) _excess_nodes.push_back(u);

          if (ex <= -_delta) _deficit_nodes.push_back(u);

        }

        int next_node = 0, next_def_node = 0;

        // Find augmenting shortest paths

        while (next_node < int(_excess_nodes.size())) {

          // Check deficit nodes

          if (_delta > 1) {

            bool delta_deficit = false;

            for ( ; next_def_node < int(_deficit_nodes.size());

                    ++next_def_node ) {

              if (_excess[_deficit_nodes[next_def_node]] <= -_delta) {

                delta_deficit = true;

                break;

              }

            }

            if (!delta_deficit) break;

          }

          // Run Dijkstra in the residual network

          s = _excess_nodes[next_node];

          if ((t = _dijkstra.run(s, _delta)) == -1) {

            if (_delta > 1) {

              ++next_node;

              continue;

            }

            return INFEASIBLE;

          }

          // Augment along a shortest path from s to t

          Value d = std::min(_excess[s], -_excess[t]);

          int u = t;

          int a;

          if (d > _delta) {

            while ((a = _pred[u]) != -1) {

              if (_res_cap[a] < d) d = _res_cap[a];

              u = _source[a];

            }

          }

          u = t;

          while ((a = _pred[u]) != -1) {

            _res_cap[a] -= d;

            _res_cap[_reverse[a]] += d;

            u = _source[a];

          }

          _excess[s] -= d;

          _excess[t] += d;

          if (_excess[s] < _delta) ++next_node;

        }

        if (_delta == 1) break;

        _delta = _delta <= _factor ? 1 : _delta / _factor;

      }

      return OPTIMAL;

    }

    // Execute the successive shortest path algorithm

    ProblemType startWithoutScaling() {

      // Find excess nodes

      _excess_nodes.clear();

      for (int i = 0; i != _node_num; ++i) {

        if (_excess[i] > 0) _excess_nodes.push_back(i);

      }

      if (_excess_nodes.size() == 0) return OPTIMAL;

      int next_node = 0;

      // Find shortest paths

      int s, t;

      ResidualDijkstra _dijkstra(*this);

      while ( _excess[_excess_nodes[next_node]] > 0 ||

              ++next_node < int(_excess_nodes.size()) )

      {

        // Run Dijkstra in the residual network

        s = _excess_nodes[next_node];

        if ((t = _dijkstra.run(s)) == -1) return INFEASIBLE;

        // Augment along a shortest path from s to t

        Value d = std::min(_excess[s], -_excess[t]);

        int u = t;

        int a;

        if (d > 1) {

          while ((a = _pred[u]) != -1) {

            if (_res_cap[a] < d) d = _res_cap[a];

            u = _source[a];

          }