INSTALL
author Peter Kovacs <kpeter@inf.elte.hu>
Wed, 04 Mar 2009 14:56:09 +0100
changeset 546 d6b40ebb2617
parent 318 1e2d6ca80793
child 564 eda12d8ac953
permissions -rw-r--r--
Doc improvements in GomoryHu (#66)
And make init() and start() private + bug fix in the test file.
alpar@5
     1
Installation Instructions
alpar@5
     2
=========================
alpar@5
     3
kpeter@318
     4
Since you are reading this I assume you already obtained one of the release
alpar@5
     5
tarballs and successfully extracted it. The latest version of LEMON is
ladanyi@245
     6
available at our web page (http://lemon.cs.elte.hu/).
alpar@5
     7
kpeter@504
     8
LEMON provides two different build environments, one is based on "autotool",
kpeter@504
     9
while the other is based on "cmake". This file contains instructions only for
kpeter@504
    10
the former one, which is the recommended build environment on Linux, Mac OSX
kpeter@504
    11
and other unices or if you use Cygwin on Windows. For cmake installation
kpeter@504
    12
instructions visit http://lemon.cs.elte.hu.
kpeter@504
    13
kpeter@318
    14
In order to install LEMON from the extracted source tarball you have to
alpar@5
    15
issue the following commands:
alpar@5
    16
ladanyi@245
    17
   1. `cd lemon-x.y.z'
alpar@5
    18
ladanyi@245
    19
      This command changes to the directory which was created when you
ladanyi@245
    20
      extracted the sources. The x.y.z part is a version number.
alpar@5
    21
ladanyi@245
    22
   2. `./configure'
alpar@5
    23
ladanyi@245
    24
      This command runs the configure shell script, which does some checks and
ladanyi@245
    25
      creates the makefiles.
alpar@5
    26
ladanyi@245
    27
   3. `make'
alpar@5
    28
ladanyi@245
    29
      This command compiles the non-template part of LEMON into libemon.a
kpeter@318
    30
      file. It also compiles the programs in the tools and demo subdirectories
kpeter@318
    31
      when enabled.
alpar@5
    32
ladanyi@245
    33
   4. `make check'
alpar@5
    34
ladanyi@245
    35
      This step is optional, but recommended. It runs the test programs that
ladanyi@245
    36
      we developed for LEMON to check whether the library works properly on
ladanyi@245
    37
      your platform.
alpar@5
    38
ladanyi@245
    39
   5. `make install'
alpar@5
    40
ladanyi@245
    41
      This command installs LEMON under /usr/local (you will need root
ladanyi@245
    42
      privileges to be able to do that). If you want to install it to some
ladanyi@245
    43
      other location, then pass the --prefix=DIRECTORY flag to configure in
ladanyi@245
    44
      step 2. For example: `./configure --prefix=/home/username/lemon'.
alpar@5
    45
ladanyi@245
    46
   6. `make install-html'
alpar@5
    47
ladanyi@245
    48
      This command installs the documentation under share/doc/lemon/docs. The
ladanyi@245
    49
      generated documentation is included in the tarball. If you want to
ladanyi@245
    50
      generate it yourself, then run `make html'. Note that for this you need
ladanyi@245
    51
      to have the following programs installed: Doxygen, Graphviz, Ghostscript,
ladanyi@245
    52
      Latex.
alpar@5
    53
alpar@5
    54
ladanyi@245
    55
Configure Options and Variables
ladanyi@245
    56
===============================
ladanyi@245
    57
kpeter@318
    58
In step 2 you can customize the actions of configure by setting variables
ladanyi@245
    59
and passing options to it. This can be done like this:
ladanyi@245
    60
`./configure [OPTION]... [VARIABLE=VALUE]...'
ladanyi@245
    61
kpeter@318
    62
Below you will find some useful variables and options (see `./configure --help'
kpeter@318
    63
for more):
ladanyi@245
    64
ladanyi@245
    65
CXX='comp'
alpar@5
    66
alpar@5
    67
  Change the C++ compiler to 'comp'.
alpar@5
    68
alpar@5
    69
CXXFLAGS='flags'
alpar@5
    70
ladanyi@245
    71
  Pass the 'flags' to the compiler. For example CXXFLAGS='-O3 -march=pentium-m'
ladanyi@245
    72
  turns on generation of aggressively optimized Pentium-M specific code.
ladanyi@245
    73
ladanyi@245
    74
--prefix=PREFIX
ladanyi@245
    75
ladanyi@245
    76
  Set the installation prefix to PREFIX. By default it is /usr/local.
alpar@5
    77
alpar@5
    78
--enable-demo
alpar@5
    79
ladanyi@245
    80
   Build the examples in the demo subdirectory.
alpar@5
    81
alpar@5
    82
--disable-demo
alpar@5
    83
ladanyi@245
    84
   Do not build the examples in the demo subdirectory (default).
alpar@5
    85
ladanyi@245
    86
--enable-tools
ladanyi@245
    87
ladanyi@245
    88
   Build the programs in the tools subdirectory (default).
ladanyi@245
    89
ladanyi@245
    90
--disable-tools
ladanyi@245
    91
ladanyi@245
    92
   Do not build the programs in the tools subdirectory.
alpar@5
    93
alpar@5
    94
--with-glpk[=PREFIX]
alpar@5
    95
alpar@5
    96
   Enable GLPK support (default). You should specify the prefix too if
alpar@5
    97
   you installed GLPK to some non-standard location (e.g. your home
alpar@5
    98
   directory). If it is not found, GLPK support will be disabled.
alpar@5
    99
alpar@5
   100
--with-glpk-includedir=DIR
alpar@5
   101
alpar@5
   102
   The directory where the GLPK header files are located. This is only
alpar@5
   103
   useful when the GLPK headers and libraries are not under the same
alpar@5
   104
   prefix (which is unlikely).
alpar@5
   105
alpar@5
   106
--with-glpk-libdir=DIR
alpar@5
   107
alpar@5
   108
   The directory where the GLPK libraries are located. This is only
alpar@5
   109
   useful when the GLPK headers and libraries are not under the same
alpar@5
   110
   prefix (which is unlikely).
alpar@5
   111
alpar@5
   112
--without-glpk
alpar@5
   113
alpar@5
   114
   Disable GLPK support.
alpar@5
   115
alpar@5
   116
--with-cplex[=PREFIX]
alpar@5
   117
alpar@5
   118
   Enable CPLEX support (default). You should specify the prefix too
alpar@5
   119
   if you installed CPLEX to some non-standard location
alpar@5
   120
   (e.g. /opt/ilog/cplex75). If it is not found, CPLEX support will be
alpar@5
   121
   disabled.
alpar@5
   122
alpar@5
   123
--with-cplex-includedir=DIR
alpar@5
   124
alpar@5
   125
   The directory where the CPLEX header files are located. This is
alpar@5
   126
   only useful when the CPLEX headers and libraries are not under the
alpar@5
   127
   same prefix (e.g.  /usr/local/cplex/cplex75/include).
alpar@5
   128
alpar@5
   129
--with-cplex-libdir=DIR
alpar@5
   130
alpar@5
   131
   The directory where the CPLEX libraries are located. This is only
alpar@5
   132
   useful when the CPLEX headers and libraries are not under the same
alpar@5
   133
   prefix (e.g.
alpar@5
   134
   /usr/local/cplex/cplex75/lib/i86_linux2_glibc2.2_gcc3.0/static_pic_mt).
alpar@5
   135
alpar@5
   136
--without-cplex
alpar@5
   137
alpar@5
   138
   Disable CPLEX support.
ladanyi@245
   139
ladanyi@245
   140
--with-soplex[=PREFIX]
ladanyi@245
   141
ladanyi@245
   142
   Enable SoPlex support (default). You should specify the prefix too if
ladanyi@245
   143
   you installed SoPlex to some non-standard location (e.g. your home
ladanyi@245
   144
   directory). If it is not found, SoPlex support will be disabled.
ladanyi@245
   145
ladanyi@245
   146
--with-soplex-includedir=DIR
ladanyi@245
   147
ladanyi@245
   148
   The directory where the SoPlex header files are located. This is only
ladanyi@245
   149
   useful when the SoPlex headers and libraries are not under the same
ladanyi@245
   150
   prefix (which is unlikely).
ladanyi@245
   151
ladanyi@245
   152
--with-soplex-libdir=DIR
ladanyi@245
   153
ladanyi@245
   154
   The directory where the SoPlex libraries are located. This is only
ladanyi@245
   155
   useful when the SoPlex headers and libraries are not under the same
ladanyi@245
   156
   prefix (which is unlikely).
ladanyi@245
   157
ladanyi@245
   158
--without-soplex
ladanyi@245
   159
ladanyi@245
   160
   Disable SoPlex support.