lemon-main: comparison lemon/core.h

equal deleted inserted replaced

-:16844a528923
+:8b39b894a76c
 #endif
 /// \addtogroup gutils
 /// @{
-///Creates convenience typedefs for the digraph types and iterators
+///Create convenient typedefs for the digraph types and iterators
-///This \c \#define creates convenience typedefs for the following types
+///This \c \#define creates convenient type definitions for the following
-///of \c Digraph: \c Node,  \c NodeIt, \c Arc, \c ArcIt, \c InArcIt,
+///types of \c Digraph: \c Node,  \c NodeIt, \c Arc, \c ArcIt, \c InArcIt,
 ///\c OutArcIt, \c BoolNodeMap, \c IntNodeMap, \c DoubleNodeMap,
 ///\c BoolArcMap, \c IntArcMap, \c DoubleArcMap.
 ///
 ///\note If the graph type is a dependent type, ie. the graph type depend
 ///on a template parameter, then use \c TEMPLATE_DIGRAPH_TYPEDEFS()
 typedef Digraph::NodeMap<bool> BoolNodeMap;                           \
 typedef Digraph::NodeMap<int> IntNodeMap;                             \
 typedef Digraph::NodeMap<double> DoubleNodeMap;                       \
 typedef Digraph::ArcMap<bool> BoolArcMap;                             \
 typedef Digraph::ArcMap<int> IntArcMap;                               \
-typedef Digraph::ArcMap<double> DoubleArcMap
+typedef Digraph::ArcMap<double> DoubleArcMap;
-///Creates convenience typedefs for the digraph types and iterators
+///Create convenient typedefs for the digraph types and iterators
 ///\see DIGRAPH_TYPEDEFS
 ///
 ///\note Use this macro, if the graph type is a dependent type,
 ///ie. the graph type depend on a template parameter.
 typedef typename Digraph::template NodeMap<bool> BoolNodeMap;         \
 typedef typename Digraph::template NodeMap<int> IntNodeMap;           \
 typedef typename Digraph::template NodeMap<double> DoubleNodeMap;     \
 typedef typename Digraph::template ArcMap<bool> BoolArcMap;           \
 typedef typename Digraph::template ArcMap<int> IntArcMap;             \
-typedef typename Digraph::template ArcMap<double> DoubleArcMap
+typedef typename Digraph::template ArcMap<double> DoubleArcMap;
-///Creates convenience typedefs for the graph types and iterators
+///Create convenient typedefs for the graph types and iterators
-///This \c \#define creates the same convenience typedefs as defined
+///This \c \#define creates the same convenient type definitions as defined
 ///by \ref DIGRAPH_TYPEDEFS(Graph) and six more, namely it creates
 ///\c Edge, \c EdgeIt, \c IncEdgeIt, \c BoolEdgeMap, \c IntEdgeMap,
 ///\c DoubleEdgeMap.
 ///
 ///\note If the graph type is a dependent type, ie. the graph type depend
-///on a template parameter, then use \c TEMPLATE_DIGRAPH_TYPEDEFS()
+///on a template parameter, then use \c TEMPLATE_GRAPH_TYPEDEFS()
 ///macro.
 #define GRAPH_TYPEDEFS(Graph)                                           \
 DIGRAPH_TYPEDEFS(Graph);                                              \
 typedef Graph::Edge Edge;                                             \
 typedef Graph::EdgeIt EdgeIt;                                         \
 typedef Graph::IncEdgeIt IncEdgeIt;                                   \
 typedef Graph::EdgeMap<bool> BoolEdgeMap;                             \
 typedef Graph::EdgeMap<int> IntEdgeMap;                               \
-typedef Graph::EdgeMap<double> DoubleEdgeMap
+typedef Graph::EdgeMap<double> DoubleEdgeMap;
-///Creates convenience typedefs for the graph types and iterators
+///Create convenient typedefs for the graph types and iterators
 ///\see GRAPH_TYPEDEFS
 ///
 ///\note Use this macro, if the graph type is a dependent type,
 ///ie. the graph type depend on a template parameter.
 typedef typename Graph::Edge Edge;                                    \
 typedef typename Graph::EdgeIt EdgeIt;                                \
 typedef typename Graph::IncEdgeIt IncEdgeIt;                          \
 typedef typename Graph::template EdgeMap<bool> BoolEdgeMap;           \
 typedef typename Graph::template EdgeMap<int> IntEdgeMap;             \
-typedef typename Graph::template EdgeMap<double> DoubleEdgeMap
+typedef typename Graph::template EdgeMap<double> DoubleEdgeMap;
-/// \brief Function to count the items in the graph.
+/// \brief Function to count the items in a graph.
 ///
-/// This function counts the items (nodes, arcs etc) in the graph.
+/// This function counts the items (nodes, arcs etc.) in a graph.
-/// The complexity of the function is O(n) because
+/// The complexity of the function is linear because
 /// it iterates on all of the items.
 template <typename Graph, typename Item>
 inline int countItems(const Graph& g) {
 typedef typename ItemSetTraits<Graph, Item>::ItemIt ItemIt;
 int num = 0;
 }
 /// \brief Function to count the nodes in the graph.
 ///
 /// This function counts the nodes in the graph.
-/// The complexity of the function is O(n) but for some
+/// The complexity of the function is <em>O</em>(<em>n</em>), but for some
-/// graph structures it is specialized to run in O(1).
+/// graph structures it is specialized to run in <em>O</em>(1).
 ///
-/// If the graph contains a \e nodeNum() member function and a
+/// \note If the graph contains a \c nodeNum() member function and a
-/// \e NodeNumTag tag then this function calls directly the member
+/// \c NodeNumTag tag then this function calls directly the member
 /// function to query the cardinality of the node set.
 template <typename Graph>
 inline int countNodes(const Graph& g) {
 return _core_bits::CountNodesSelector<Graph>::count(g);
 }
 }
 /// \brief Function to count the arcs in the graph.
 ///
 /// This function counts the arcs in the graph.
-/// The complexity of the function is O(e) but for some
+/// The complexity of the function is <em>O</em>(<em>m</em>), but for some
-/// graph structures it is specialized to run in O(1).
+/// graph structures it is specialized to run in <em>O</em>(1).
 ///
-/// If the graph contains a \e arcNum() member function and a
+/// \note If the graph contains a \c arcNum() member function and a
-/// \e EdgeNumTag tag then this function calls directly the member
+/// \c ArcNumTag tag then this function calls directly the member
 /// function to query the cardinality of the arc set.
 template <typename Graph>
 inline int countArcs(const Graph& g) {
 return _core_bits::CountArcsSelector<Graph>::count(g);
 }
 // Edge counting:
 namespace _core_bits {
 template <typename Graph, typename Enable = void>
 struct CountEdgesSelector {
 static int count(const Graph &g) {
 }
 /// \brief Function to count the edges in the graph.
 ///
 /// This function counts the edges in the graph.
-/// The complexity of the function is O(m) but for some
+/// The complexity of the function is <em>O</em>(<em>m</em>), but for some
-/// graph structures it is specialized to run in O(1).
+/// graph structures it is specialized to run in <em>O</em>(1).
 ///
-/// If the graph contains a \e edgeNum() member function and a
+/// \note If the graph contains a \c edgeNum() member function and a
-/// \e EdgeNumTag tag then this function calls directly the member
+/// \c EdgeNumTag tag then this function calls directly the member
 /// function to query the cardinality of the edge set.
 template <typename Graph>
 inline int countEdges(const Graph& g) {
 return _core_bits::CountEdgesSelector<Graph>::count(g);
 }
 /// \brief Function to count the number of the out-arcs from node \c n.
 ///
 /// This function counts the number of the out-arcs from node \c n
-/// in the graph.
+/// in the graph \c g.
 template <typename Graph>
-inline int countOutArcs(const Graph& _g,  const typename Graph::Node& _n) {
+inline int countOutArcs(const Graph& g,  const typename Graph::Node& n) {
-return countNodeDegree<Graph, typename Graph::OutArcIt>(_g, _n);
+return countNodeDegree<Graph, typename Graph::OutArcIt>(g, n);
 }
 /// \brief Function to count the number of the in-arcs to node \c n.
 ///
 /// This function counts the number of the in-arcs to node \c n
-/// in the graph.
+/// in the graph \c g.
 template <typename Graph>
-inline int countInArcs(const Graph& _g,  const typename Graph::Node& _n) {
+inline int countInArcs(const Graph& g,  const typename Graph::Node& n) {
-return countNodeDegree<Graph, typename Graph::InArcIt>(_g, _n);
+return countNodeDegree<Graph, typename Graph::InArcIt>(g, n);
 }
 /// \brief Function to count the number of the inc-edges to node \c n.
 ///
 /// This function counts the number of the inc-edges to node \c n
-/// in the graph.
+/// in the undirected graph \c g.
 template <typename Graph>
-inline int countIncEdges(const Graph& _g,  const typename Graph::Node& _n) {
+inline int countIncEdges(const Graph& g,  const typename Graph::Node& n) {
-return countNodeDegree<Graph, typename Graph::IncEdgeIt>(_g, _n);
+return countNodeDegree<Graph, typename Graph::IncEdgeIt>(g, n);
 }
 namespace _core_bits {
 template <typename Digraph, typename Item, typename RefMap>
 virtual ~MapCopyBase() {}
 };
 template <typename Digraph, typename Item, typename RefMap,
-typename ToMap, typename FromMap>
+typename FromMap, typename ToMap>
 class MapCopy : public MapCopyBase<Digraph, Item, RefMap> {
 public:
-MapCopy(ToMap& tmap, const FromMap& map)
+MapCopy(const FromMap& map, ToMap& tmap)
-: _tmap(tmap), _map(map) {}
+: _map(map), _tmap(tmap) {}
 virtual void copy(const Digraph& digraph, const RefMap& refMap) {
 typedef typename ItemSetTraits<Digraph, Item>::ItemIt ItemIt;
 for (ItemIt it(digraph); it != INVALID; ++it) {
 _tmap.set(refMap[it], _map[it]);
 }
 }
 private:
+const FromMap& _map;
 ToMap& _tmap;
-const FromMap& _map;
 };
 template <typename Digraph, typename Item, typename RefMap, typename It>
 class ItemCopy : public MapCopyBase<Digraph, Item, RefMap> {
 public:
-ItemCopy(It& it, const Item& item) : _it(it), _item(item) {}
+ItemCopy(const Item& item, It& it) : _item(item), _it(it) {}
 virtual void copy(const Digraph&, const RefMap& refMap) {
 _it = refMap[_item];
 }
 private:
+Item _item;
 It& _it;
-Item _item;
 };
 template <typename Digraph, typename Item, typename RefMap, typename Ref>
 class RefCopy : public MapCopyBase<Digraph, Item, RefMap> {
 public:
 };
 template <typename Digraph, typename Enable = void>
 struct DigraphCopySelector {
 template <typename From, typename NodeRefMap, typename ArcRefMap>
-static void copy(Digraph &to, const From& from,
+static void copy(const From& from, Digraph &to,
 NodeRefMap& nodeRefMap, ArcRefMap& arcRefMap) {
 for (typename From::NodeIt it(from); it != INVALID; ++it) {
 nodeRefMap[it] = to.addNode();
 }
 for (typename From::ArcIt it(from); it != INVALID; ++it) {
 struct DigraphCopySelector<
 Digraph,
 typename enable_if<typename Digraph::BuildTag, void>::type>
 {
 template <typename From, typename NodeRefMap, typename ArcRefMap>
-static void copy(Digraph &to, const From& from,
+static void copy(const From& from, Digraph &to,
 NodeRefMap& nodeRefMap, ArcRefMap& arcRefMap) {
 to.build(from, nodeRefMap, arcRefMap);
 }
 };
 template <typename Graph, typename Enable = void>
 struct GraphCopySelector {
 template <typename From, typename NodeRefMap, typename EdgeRefMap>
-static void copy(Graph &to, const From& from,
+static void copy(const From& from, Graph &to,
 NodeRefMap& nodeRefMap, EdgeRefMap& edgeRefMap) {
 for (typename From::NodeIt it(from); it != INVALID; ++it) {
 nodeRefMap[it] = to.addNode();
 }
 for (typename From::EdgeIt it(from); it != INVALID; ++it) {
 struct GraphCopySelector<
 Graph,
 typename enable_if<typename Graph::BuildTag, void>::type>
 {
 template <typename From, typename NodeRefMap, typename EdgeRefMap>
-static void copy(Graph &to, const From& from,
+static void copy(const From& from, Graph &to,
 NodeRefMap& nodeRefMap, EdgeRefMap& edgeRefMap) {
 to.build(from, nodeRefMap, edgeRefMap);
 }
 };
 }
 /// \brief Class to copy a digraph.
 ///
 /// Class to copy a digraph to another digraph (duplicate a digraph). The
-/// simplest way of using it is through the \c copyDigraph() function.
+/// simplest way of using it is through the \c digraphCopy() function.
 ///
-/// This class not just make a copy of a graph, but it can create
+/// This class not only make a copy of a digraph, but it can create
 /// references and cross references between the nodes and arcs of
-/// the two graphs, it can copy maps for use with the newly created
+/// the two digraphs, and it can copy maps to use with the newly created
-/// graph and copy nodes and arcs.
+/// digraph.
 ///
-/// To make a copy from a graph, first an instance of DigraphCopy
+/// To make a copy from a digraph, first an instance of DigraphCopy
-/// should be created, then the data belongs to the graph should
+/// should be created, then the data belongs to the digraph should
 /// assigned to copy. In the end, the \c run() member should be
 /// called.
 ///
-/// The next code copies a graph with several data:
+/// The next code copies a digraph with several data:
 ///\code
-///  DigraphCopy<NewGraph, OrigGraph> dc(new_graph, orig_graph);
+///  DigraphCopy<OrigGraph, NewGraph> cg(orig_graph, new_graph);
-///  // create a reference for the nodes
+///  // Create references for the nodes
 ///  OrigGraph::NodeMap<NewGraph::Node> nr(orig_graph);
-///  dc.nodeRef(nr);
+///  cg.nodeRef(nr);
-///  // create a cross reference (inverse) for the arcs
+///  // Create cross references (inverse) for the arcs
 ///  NewGraph::ArcMap<OrigGraph::Arc> acr(new_graph);
-///  dc.arcCrossRef(acr);
+///  cg.arcCrossRef(acr);
-///  // copy an arc map
+///  // Copy an arc map
 ///  OrigGraph::ArcMap<double> oamap(orig_graph);
 ///  NewGraph::ArcMap<double> namap(new_graph);
-///  dc.arcMap(namap, oamap);
+///  cg.arcMap(oamap, namap);
-///  // copy a node
+///  // Copy a node
 ///  OrigGraph::Node on;
 ///  NewGraph::Node nn;
-///  dc.node(nn, on);
+///  cg.node(on, nn);
-///  // Executions of copy
+///  // Execute copying
-///  dc.run();
+///  cg.run();
 ///\endcode
-template <typename To, typename From>
+template <typename From, typename To>
 class DigraphCopy {
 private:
 typedef typename From::Node Node;
 typedef typename From::NodeIt NodeIt;
 typedef typename To::Arc TArc;
 typedef typename From::template NodeMap<TNode> NodeRefMap;
 typedef typename From::template ArcMap<TArc> ArcRefMap;
 public:
+/// \brief Constructor of DigraphCopy.
-/// \brief Constructor for the DigraphCopy.
+///
-///
+/// Constructor of DigraphCopy for copying the content of the
-/// It copies the content of the \c _from digraph into the
+/// \c from digraph into the \c to digraph.
-/// \c _to digraph.
+DigraphCopy(const From& from, To& to)
-DigraphCopy(To& to, const From& from)
 : _from(from), _to(to) {}
-/// \brief Destructor of the DigraphCopy
+/// \brief Destructor of DigraphCopy
 ///
-/// Destructor of the DigraphCopy
+/// Destructor of DigraphCopy.
 ~DigraphCopy() {
 for (int i = 0; i < int(_node_maps.size()); ++i) {
 delete _node_maps[i];
 }
 for (int i = 0; i < int(_arc_maps.size()); ++i) {
 delete _arc_maps[i];
 }
 }
-/// \brief Copies the node references into the given map.
+/// \brief Copy the node references into the given map.
 ///
-/// Copies the node references into the given map. The parameter
+/// This function copies the node references into the given map.
-/// should be a map, which key type is the Node type of the source
+/// The parameter should be a map, whose key type is the Node type of
-/// graph, while the value type is the Node type of the
+/// the source digraph, while the value type is the Node type of the
-/// destination graph.
+/// destination digraph.
 template <typename NodeRef>
 DigraphCopy& nodeRef(NodeRef& map) {
 _node_maps.push_back(new _core_bits::RefCopy<From, Node,
 NodeRefMap, NodeRef>(map));
 return *this;
 }
-/// \brief Copies the node cross references into the given map.
+/// \brief Copy the node cross references into the given map.
 ///
-///  Copies the node cross references (reverse references) into
+/// This function copies the node cross references (reverse references)
-///  the given map. The parameter should be a map, which key type
+/// into the given map. The parameter should be a map, whose key type
-///  is the Node type of the destination graph, while the value type is
+/// is the Node type of the destination digraph, while the value type is
-///  the Node type of the source graph.
+/// the Node type of the source digraph.
 template <typename NodeCrossRef>
 DigraphCopy& nodeCrossRef(NodeCrossRef& map) {
 _node_maps.push_back(new _core_bits::CrossRefCopy<From, Node,
 NodeRefMap, NodeCrossRef>(map));
 return *this;
 }
-/// \brief Make copy of the given map.
+/// \brief Make a copy of the given node map.
 ///
-/// Makes copy of the given map for the newly created digraph.
+/// This function makes a copy of the given node map for the newly
-/// The new map's key type is the destination graph's node type,
+/// created digraph.
-/// and the copied map's key type is the source graph's node type.
+/// The key type of the new map \c tmap should be the Node type of the
-template <typename ToMap, typename FromMap>
+/// destination digraph, and the key type of the original map \c map
-DigraphCopy& nodeMap(ToMap& tmap, const FromMap& map) {
+/// should be the Node type of the source digraph.
+template <typename FromMap, typename ToMap>
+DigraphCopy& nodeMap(const FromMap& map, ToMap& tmap) {
 _node_maps.push_back(new _core_bits::MapCopy<From, Node,
-NodeRefMap, ToMap, FromMap>(tmap, map));
+NodeRefMap, FromMap, ToMap>(map, tmap));
 return *this;
 }
 /// \brief Make a copy of the given node.
 ///
-/// Make a copy of the given node.
+/// This function makes a copy of the given node.
-DigraphCopy& node(TNode& tnode, const Node& snode) {
+DigraphCopy& node(const Node& node, TNode& tnode) {
 _node_maps.push_back(new _core_bits::ItemCopy<From, Node,
-NodeRefMap, TNode>(tnode, snode));
+NodeRefMap, TNode>(node, tnode));
 return *this;
 }
-/// \brief Copies the arc references into the given map.
+/// \brief Copy the arc references into the given map.
 ///
-/// Copies the arc references into the given map.
+/// This function copies the arc references into the given map.
+/// The parameter should be a map, whose key type is the Arc type of
+/// the source digraph, while the value type is the Arc type of the
+/// destination digraph.
 template <typename ArcRef>
 DigraphCopy& arcRef(ArcRef& map) {
 _arc_maps.push_back(new _core_bits::RefCopy<From, Arc,
 ArcRefMap, ArcRef>(map));
 return *this;
 }
-/// \brief Copies the arc cross references into the given map.
+/// \brief Copy the arc cross references into the given map.
 ///
-///  Copies the arc cross references (reverse references) into
+/// This function copies the arc cross references (reverse references)
-///  the given map.
+/// into the given map. The parameter should be a map, whose key type
+/// is the Arc type of the destination digraph, while the value type is
+/// the Arc type of the source digraph.
 template <typename ArcCrossRef>
 DigraphCopy& arcCrossRef(ArcCrossRef& map) {
 _arc_maps.push_back(new _core_bits::CrossRefCopy<From, Arc,
 ArcRefMap, ArcCrossRef>(map));
 return *this;
 }
-/// \brief Make copy of the given map.
+/// \brief Make a copy of the given arc map.
 ///
-/// Makes copy of the given map for the newly created digraph.
+/// This function makes a copy of the given arc map for the newly
-/// The new map's key type is the to digraph's arc type,
+/// created digraph.
-/// and the copied map's key type is the from digraph's arc
+/// The key type of the new map \c tmap should be the Arc type of the
-/// type.
+/// destination digraph, and the key type of the original map \c map
-template <typename ToMap, typename FromMap>
+/// should be the Arc type of the source digraph.
-DigraphCopy& arcMap(ToMap& tmap, const FromMap& map) {
+template <typename FromMap, typename ToMap>
+DigraphCopy& arcMap(const FromMap& map, ToMap& tmap) {
 _arc_maps.push_back(new _core_bits::MapCopy<From, Arc,
-ArcRefMap, ToMap, FromMap>(tmap, map));
+ArcRefMap, FromMap, ToMap>(map, tmap));
 return *this;
 }
 /// \brief Make a copy of the given arc.
 ///
-/// Make a copy of the given arc.
+/// This function makes a copy of the given arc.
-DigraphCopy& arc(TArc& tarc, const Arc& sarc) {
+DigraphCopy& arc(const Arc& arc, TArc& tarc) {
 _arc_maps.push_back(new _core_bits::ItemCopy<From, Arc,
-ArcRefMap, TArc>(tarc, sarc));
+ArcRefMap, TArc>(arc, tarc));
 return *this;
 }
-/// \brief Executes the copies.
+/// \brief Execute copying.
 ///
-/// Executes the copies.
+/// This function executes the copying of the digraph along with the
+/// copying of the assigned data.
 void run() {
 NodeRefMap nodeRefMap(_from);
 ArcRefMap arcRefMap(_from);
 _core_bits::DigraphCopySelector<To>::
-copy(_to, _from, nodeRefMap, arcRefMap);
+copy(_from, _to, nodeRefMap, arcRefMap);
 for (int i = 0; i < int(_node_maps.size()); ++i) {
 _node_maps[i]->copy(_from, nodeRefMap);
 }
 for (int i = 0; i < int(_arc_maps.size()); ++i) {
 _arc_maps[i]->copy(_from, arcRefMap);
 }
 }
 protected:
 const From& _from;
 To& _to;
 std::vector<_core_bits::MapCopyBase<From, Node, NodeRefMap>* >
 _node_maps;
 std::vector<_core_bits::MapCopyBase<From, Arc, ArcRefMap>* >
 _arc_maps;
 };
 /// \brief Copy a digraph to another digraph.
 ///
-/// Copy a digraph to another digraph. The complete usage of the
+/// This function copies a digraph to another digraph.
-/// function is detailed in the DigraphCopy class, but a short
+/// The complete usage of it is detailed in the DigraphCopy class, but
-/// example shows a basic work:
+/// a short example shows a basic work:
 ///\code
-/// copyDigraph(trg, src).nodeRef(nr).arcCrossRef(ecr).run();
+/// digraphCopy(src, trg).nodeRef(nr).arcCrossRef(acr).run();
 ///\endcode
 ///
 /// After the copy the \c nr map will contain the mapping from the
 /// nodes of the \c from digraph to the nodes of the \c to digraph and
-/// \c ecr will contain the mapping from the arcs of the \c to digraph
+/// \c acr will contain the mapping from the arcs of the \c to digraph
 /// to the arcs of the \c from digraph.
 ///
 /// \see DigraphCopy
-template <typename To, typename From>
+template <typename From, typename To>
-DigraphCopy<To, From> copyDigraph(To& to, const From& from) {
+DigraphCopy<From, To> digraphCopy(const From& from, To& to) {
-return DigraphCopy<To, From>(to, from);
+return DigraphCopy<From, To>(from, to);
 }
 /// \brief Class to copy a graph.
 ///
 /// Class to copy a graph to another graph (duplicate a graph). The
-/// simplest way of using it is through the \c copyGraph() function.
+/// simplest way of using it is through the \c graphCopy() function.
 ///
-/// This class not just make a copy of a graph, but it can create
+/// This class not only make a copy of a graph, but it can create
 /// references and cross references between the nodes, edges and arcs of
-/// the two graphs, it can copy maps for use with the newly created
+/// the two graphs, and it can copy maps for using with the newly created
-/// graph and copy nodes, edges and arcs.
+/// graph.
 ///
 /// To make a copy from a graph, first an instance of GraphCopy
 /// should be created, then the data belongs to the graph should
 /// assigned to copy. In the end, the \c run() member should be
 /// called.
 ///
 /// The next code copies a graph with several data:
 ///\code
-///  GraphCopy<NewGraph, OrigGraph> dc(new_graph, orig_graph);
+///  GraphCopy<OrigGraph, NewGraph> cg(orig_graph, new_graph);
-///  // create a reference for the nodes
+///  // Create references for the nodes
 ///  OrigGraph::NodeMap<NewGraph::Node> nr(orig_graph);
-///  dc.nodeRef(nr);
+///  cg.nodeRef(nr);
-///  // create a cross reference (inverse) for the edges
+///  // Create cross references (inverse) for the edges
-///  NewGraph::EdgeMap<OrigGraph::Arc> ecr(new_graph);
+///  NewGraph::EdgeMap<OrigGraph::Edge> ecr(new_graph);
-///  dc.edgeCrossRef(ecr);
+///  cg.edgeCrossRef(ecr);
-///  // copy an arc map
+///  // Copy an edge map
-///  OrigGraph::ArcMap<double> oamap(orig_graph);
+///  OrigGraph::EdgeMap<double> oemap(orig_graph);
-///  NewGraph::ArcMap<double> namap(new_graph);
+///  NewGraph::EdgeMap<double> nemap(new_graph);
-///  dc.arcMap(namap, oamap);
+///  cg.edgeMap(oemap, nemap);
-///  // copy a node
+///  // Copy a node
 ///  OrigGraph::Node on;
 ///  NewGraph::Node nn;
-///  dc.node(nn, on);
+///  cg.node(on, nn);
-///  // Executions of copy
+///  // Execute copying
-///  dc.run();
+///  cg.run();
 ///\endcode
-template <typename To, typename From>
+template <typename From, typename To>
 class GraphCopy {
 private:
 typedef typename From::Node Node;
 typedef typename From::NodeIt NodeIt;
 typedef typename From::template NodeMap<TNode> NodeRefMap;
 typedef typename From::template EdgeMap<TEdge> EdgeRefMap;
 struct ArcRefMap {
-ArcRefMap(const To& to, const From& from,
+ArcRefMap(const From& from, const To& to,
 const EdgeRefMap& edge_ref, const NodeRefMap& node_ref)
-: _to(to), _from(from),
+: _from(from), _to(to),
 _edge_ref(edge_ref), _node_ref(node_ref) {}
 typedef typename From::Arc Key;
 typedef typename To::Arc Value;
 _to.source(_to.direct(_edge_ref[key], true)) :
 _from.direction(key);
 return _to.direct(_edge_ref[key], forward);
 }
+const From& _from;
 const To& _to;
-const From& _from;
 const EdgeRefMap& _edge_ref;
 const NodeRefMap& _node_ref;
 };
 public:
+/// \brief Constructor of GraphCopy.
-/// \brief Constructor for the GraphCopy.
+///
-///
+/// Constructor of GraphCopy for copying the content of the
-/// It copies the content of the \c _from graph into the
+/// \c from graph into the \c to graph.
-/// \c _to graph.
+GraphCopy(const From& from, To& to)
-GraphCopy(To& to, const From& from)
 : _from(from), _to(to) {}
-/// \brief Destructor of the GraphCopy
+/// \brief Destructor of GraphCopy
 ///
-/// Destructor of the GraphCopy
+/// Destructor of GraphCopy.
 ~GraphCopy() {
 for (int i = 0; i < int(_node_maps.size()); ++i) {
 delete _node_maps[i];
 }
 for (int i = 0; i < int(_arc_maps.size()); ++i) {
 delete _arc_maps[i];
 }
 for (int i = 0; i < int(_edge_maps.size()); ++i) {
 delete _edge_maps[i];
 }
+}
-}
+/// \brief Copy the node references into the given map.
-/// \brief Copies the node references into the given map.
+///
-///
+/// This function copies the node references into the given map.
-/// Copies the node references into the given map.
+/// The parameter should be a map, whose key type is the Node type of
+/// the source graph, while the value type is the Node type of the
+/// destination graph.
 template <typename NodeRef>
 GraphCopy& nodeRef(NodeRef& map) {
 _node_maps.push_back(new _core_bits::RefCopy<From, Node,
 NodeRefMap, NodeRef>(map));
 return *this;
 }
-/// \brief Copies the node cross references into the given map.
+/// \brief Copy the node cross references into the given map.
 ///
-///  Copies the node cross references (reverse references) into
+/// This function copies the node cross references (reverse references)
-///  the given map.
+/// into the given map. The parameter should be a map, whose key type
+/// is the Node type of the destination graph, while the value type is
+/// the Node type of the source graph.
 template <typename NodeCrossRef>
 GraphCopy& nodeCrossRef(NodeCrossRef& map) {
 _node_maps.push_back(new _core_bits::CrossRefCopy<From, Node,
 NodeRefMap, NodeCrossRef>(map));
 return *this;
 }
-/// \brief Make copy of the given map.
+/// \brief Make a copy of the given node map.
 ///
-/// Makes copy of the given map for the newly created graph.
+/// This function makes a copy of the given node map for the newly
-/// The new map's key type is the to graph's node type,
+/// created graph.
-/// and the copied map's key type is the from graph's node
+/// The key type of the new map \c tmap should be the Node type of the
-/// type.
+/// destination graph, and the key type of the original map \c map
-template <typename ToMap, typename FromMap>
+/// should be the Node type of the source graph.
-GraphCopy& nodeMap(ToMap& tmap, const FromMap& map) {
+template <typename FromMap, typename ToMap>
+GraphCopy& nodeMap(const FromMap& map, ToMap& tmap) {
 _node_maps.push_back(new _core_bits::MapCopy<From, Node,
-NodeRefMap, ToMap, FromMap>(tmap, map));
+NodeRefMap, FromMap, ToMap>(map, tmap));
 return *this;
 }
 /// \brief Make a copy of the given node.
 ///
-/// Make a copy of the given node.
+/// This function makes a copy of the given node.
-GraphCopy& node(TNode& tnode, const Node& snode) {
+GraphCopy& node(const Node& node, TNode& tnode) {
 _node_maps.push_back(new _core_bits::ItemCopy<From, Node,
-NodeRefMap, TNode>(tnode, snode));
+NodeRefMap, TNode>(node, tnode));
 return *this;
 }
-/// \brief Copies the arc references into the given map.
+/// \brief Copy the arc references into the given map.
 ///
-/// Copies the arc references into the given map.
+/// This function copies the arc references into the given map.
+/// The parameter should be a map, whose key type is the Arc type of
+/// the source graph, while the value type is the Arc type of the
+/// destination graph.
 template <typename ArcRef>
 GraphCopy& arcRef(ArcRef& map) {
 _arc_maps.push_back(new _core_bits::RefCopy<From, Arc,
 ArcRefMap, ArcRef>(map));
 return *this;
 }
-/// \brief Copies the arc cross references into the given map.
+/// \brief Copy the arc cross references into the given map.
 ///
-///  Copies the arc cross references (reverse references) into
+/// This function copies the arc cross references (reverse references)
-///  the given map.
+/// into the given map. The parameter should be a map, whose key type
+/// is the Arc type of the destination graph, while the value type is
+/// the Arc type of the source graph.
 template <typename ArcCrossRef>
 GraphCopy& arcCrossRef(ArcCrossRef& map) {
 _arc_maps.push_back(new _core_bits::CrossRefCopy<From, Arc,
 ArcRefMap, ArcCrossRef>(map));
 return *this;
 }
-/// \brief Make copy of the given map.
+/// \brief Make a copy of the given arc map.
 ///
-/// Makes copy of the given map for the newly created graph.
+/// This function makes a copy of the given arc map for the newly
-/// The new map's key type is the to graph's arc type,
+/// created graph.
-/// and the copied map's key type is the from graph's arc
+/// The key type of the new map \c tmap should be the Arc type of the
-/// type.
+/// destination graph, and the key type of the original map \c map
-template <typename ToMap, typename FromMap>
+/// should be the Arc type of the source graph.
-GraphCopy& arcMap(ToMap& tmap, const FromMap& map) {
+template <typename FromMap, typename ToMap>
+GraphCopy& arcMap(const FromMap& map, ToMap& tmap) {
 _arc_maps.push_back(new _core_bits::MapCopy<From, Arc,
-ArcRefMap, ToMap, FromMap>(tmap, map));
+ArcRefMap, FromMap, ToMap>(map, tmap));
 return *this;
 }
 /// \brief Make a copy of the given arc.
 ///
-/// Make a copy of the given arc.
+/// This function makes a copy of the given arc.
-GraphCopy& arc(TArc& tarc, const Arc& sarc) {
+GraphCopy& arc(const Arc& arc, TArc& tarc) {
 _arc_maps.push_back(new _core_bits::ItemCopy<From, Arc,
-ArcRefMap, TArc>(tarc, sarc));
+ArcRefMap, TArc>(arc, tarc));
 return *this;
 }
-/// \brief Copies the edge references into the given map.
+/// \brief Copy the edge references into the given map.
 ///
-/// Copies the edge references into the given map.
+/// This function copies the edge references into the given map.
+/// The parameter should be a map, whose key type is the Edge type of
+/// the source graph, while the value type is the Edge type of the
+/// destination graph.
 template <typename EdgeRef>
 GraphCopy& edgeRef(EdgeRef& map) {
 _edge_maps.push_back(new _core_bits::RefCopy<From, Edge,
 EdgeRefMap, EdgeRef>(map));
 return *this;
 }
-/// \brief Copies the edge cross references into the given map.
+/// \brief Copy the edge cross references into the given map.
 ///
-/// Copies the edge cross references (reverse
+/// This function copies the edge cross references (reverse references)
-/// references) into the given map.
+/// into the given map. The parameter should be a map, whose key type
+/// is the Edge type of the destination graph, while the value type is
+/// the Edge type of the source graph.
 template <typename EdgeCrossRef>
 GraphCopy& edgeCrossRef(EdgeCrossRef& map) {
 _edge_maps.push_back(new _core_bits::CrossRefCopy<From,
 Edge, EdgeRefMap, EdgeCrossRef>(map));
 return *this;
 }
-/// \brief Make copy of the given map.
+/// \brief Make a copy of the given edge map.
 ///
-/// Makes copy of the given map for the newly created graph.
+/// This function makes a copy of the given edge map for the newly
-/// The new map's key type is the to graph's edge type,
+/// created graph.
-/// and the copied map's key type is the from graph's edge
+/// The key type of the new map \c tmap should be the Edge type of the
-/// type.
+/// destination graph, and the key type of the original map \c map
-template <typename ToMap, typename FromMap>
+/// should be the Edge type of the source graph.
-GraphCopy& edgeMap(ToMap& tmap, const FromMap& map) {
+template <typename FromMap, typename ToMap>
+GraphCopy& edgeMap(const FromMap& map, ToMap& tmap) {
 _edge_maps.push_back(new _core_bits::MapCopy<From, Edge,
-EdgeRefMap, ToMap, FromMap>(tmap, map));
+EdgeRefMap, FromMap, ToMap>(map, tmap));
 return *this;
 }
 /// \brief Make a copy of the given edge.
 ///
-/// Make a copy of the given edge.
+/// This function makes a copy of the given edge.
-GraphCopy& edge(TEdge& tedge, const Edge& sedge) {
+GraphCopy& edge(const Edge& edge, TEdge& tedge) {
 _edge_maps.push_back(new _core_bits::ItemCopy<From, Edge,
-EdgeRefMap, TEdge>(tedge, sedge));
+EdgeRefMap, TEdge>(edge, tedge));
 return *this;
 }
-/// \brief Executes the copies.
+/// \brief Execute copying.
 ///
-/// Executes the copies.
+/// This function executes the copying of the graph along with the
+/// copying of the assigned data.
 void run() {
 NodeRefMap nodeRefMap(_from);
 EdgeRefMap edgeRefMap(_from);
-ArcRefMap arcRefMap(_to, _from, edgeRefMap, nodeRefMap);
+ArcRefMap arcRefMap(_from, _to, edgeRefMap, nodeRefMap);
 _core_bits::GraphCopySelector<To>::
-copy(_to, _from, nodeRefMap, edgeRefMap);
+copy(_from, _to, nodeRefMap, edgeRefMap);
 for (int i = 0; i < int(_node_maps.size()); ++i) {
 _node_maps[i]->copy(_from, nodeRefMap);
 }
 for (int i = 0; i < int(_edge_maps.size()); ++i) {
 _edge_maps[i]->copy(_from, edgeRefMap);
 const From& _from;
 To& _to;
 std::vector<_core_bits::MapCopyBase<From, Node, NodeRefMap>* >
 _node_maps;
 std::vector<_core_bits::MapCopyBase<From, Arc, ArcRefMap>* >
 _arc_maps;
 std::vector<_core_bits::MapCopyBase<From, Edge, EdgeRefMap>* >
 _edge_maps;
 };
 /// \brief Copy a graph to another graph.
 ///
-/// Copy a graph to another graph. The complete usage of the
+/// This function copies a graph to another graph.
-/// function is detailed in the GraphCopy class, but a short
+/// The complete usage of it is detailed in the GraphCopy class,
-/// example shows a basic work:
+/// but a short example shows a basic work:
 ///\code
-/// copyGraph(trg, src).nodeRef(nr).arcCrossRef(ecr).run();
+/// graphCopy(src, trg).nodeRef(nr).edgeCrossRef(ecr).run();
 ///\endcode
 ///
 /// After the copy the \c nr map will contain the mapping from the
 /// nodes of the \c from graph to the nodes of the \c to graph and
-/// \c ecr will contain the mapping from the arcs of the \c to graph
+/// \c ecr will contain the mapping from the edges of the \c to graph
-/// to the arcs of the \c from graph.
+/// to the edges of the \c from graph.
 ///
 /// \see GraphCopy
-template <typename To, typename From>
+template <typename From, typename To>
-GraphCopy<To, From>
+GraphCopy<From, To>
-copyGraph(To& to, const From& from) {
+graphCopy(const From& from, To& to) {
-return GraphCopy<To, From>(to, from);
+return GraphCopy<From, To>(from, to);
 }
 namespace _core_bits {
 template <typename Graph, typename Enable = void>
 };
 template <typename Graph>
 struct FindArcSelector<
 Graph,
-typename enable_if<typename Graph::FindEdgeTag, void>::type>
+typename enable_if<typename Graph::FindArcTag, void>::type>
 {
 typedef typename Graph::Node Node;
 typedef typename Graph::Arc Arc;
 static Arc find(const Graph &g, Node u, Node v, Arc prev) {
 return g.findArc(u, v, prev);
 }
 };
 }
-/// \brief Finds an arc between two nodes of a graph.
+/// \brief Find an arc between two nodes of a digraph.
 ///
-/// Finds an arc from node \c u to node \c v in graph \c g.
+/// This function finds an arc from node \c u to node \c v in the
+/// digraph \c g.
 ///
 /// If \c prev is \ref INVALID (this is the default value), then
 /// it finds the first arc from \c u to \c v. Otherwise it looks for
 /// the next arc from \c u to \c v after \c prev.
 /// \return The found arc or \ref INVALID if there is no such an arc.
 ///
 /// Thus you can iterate through each arc from \c u to \c v as it follows.
 ///\code
-/// for(Arc e=findArc(g,u,v);e!=INVALID;e=findArc(g,u,v,e)) {
+/// for(Arc e = findArc(g,u,v); e != INVALID; e = findArc(g,u,v,e)) {
 ///   ...
 /// }
 ///\endcode
 ///
-///\sa ArcLookUp
+/// \note \ref ConArcIt provides iterator interface for the same
-///\sa AllArcLookUp
+/// functionality.
-///\sa DynArcLookUp
+///
 ///\sa ConArcIt
+///\sa ArcLookUp, AllArcLookUp, DynArcLookUp
 template <typename Graph>
 inline typename Graph::Arc
 findArc(const Graph &g, typename Graph::Node u, typename Graph::Node v,
 typename Graph::Arc prev = INVALID) {
 return _core_bits::FindArcSelector<Graph>::find(g, u, v, prev);
 }
-/// \brief Iterator for iterating on arcs connected the same nodes.
+/// \brief Iterator for iterating on parallel arcs connecting the same nodes.
 ///
-/// Iterator for iterating on arcs connected the same nodes. It is
+/// Iterator for iterating on parallel arcs connecting the same nodes. It is
-/// higher level interface for the findArc() function. You can
+/// a higher level interface for the \ref findArc() function. You can
 /// use it the following way:
 ///\code
 /// for (ConArcIt<Graph> it(g, src, trg); it != INVALID; ++it) {
 ///   ...
 /// }
 ///\endcode
 ///
 ///\sa findArc()
-///\sa ArcLookUp
+///\sa ArcLookUp, AllArcLookUp, DynArcLookUp
-///\sa AllArcLookUp
-///\sa DynArcLookUp
 template <typename _Graph>
 class ConArcIt : public _Graph::Arc {
 public:
 typedef _Graph Graph;
 typedef typename Graph::Arc Arc;
 typedef typename Graph::Node Node;
 /// \brief Constructor.
 ///
-/// Construct a new ConArcIt iterating on the arcs which
+/// Construct a new ConArcIt iterating on the arcs that
-/// connects the \c u and \c v node.
+/// connects nodes \c u and \c v.
 ConArcIt(const Graph& g, Node u, Node v) : _graph(g) {
 Parent::operator=(findArc(_graph, u, v));
 }
 /// \brief Constructor.
 ///
-/// Construct a new ConArcIt which continues the iterating from
+/// Construct a new ConArcIt that continues the iterating from arc \c a.
-/// the \c e arc.
 ConArcIt(const Graph& g, Arc a) : Parent(a), _graph(g) {}
 /// \brief Increment operator.
 ///
 /// It increments the iterator and gives back the next arc.
 return g.findEdge(u, v, prev);
 }
 };
 }
-/// \brief Finds an edge between two nodes of a graph.
+/// \brief Find an edge between two nodes of a graph.
 ///
-/// Finds an edge from node \c u to node \c v in graph \c g.
+/// This function finds an edge from node \c u to node \c v in graph \c g.
-/// If the node \c u and node \c v is equal then each loop edge
+/// If node \c u and node \c v is equal then each loop edge
 /// will be enumerated once.
 ///
 /// If \c prev is \ref INVALID (this is the default value), then
-/// it finds the first arc from \c u to \c v. Otherwise it looks for
+/// it finds the first edge from \c u to \c v. Otherwise it looks for
-/// the next arc from \c u to \c v after \c prev.
+/// the next edge from \c u to \c v after \c prev.
-/// \return The found arc or \ref INVALID if there is no such an arc.
+/// \return The found edge or \ref INVALID if there is no such an edge.
 ///
-/// Thus you can iterate through each arc from \c u to \c v as it follows.
+/// Thus you can iterate through each edge between \c u and \c v
+/// as it follows.
 ///\code
-/// for(Edge e = findEdge(g,u,v); e != INVALID;
+/// for(Edge e = findEdge(g,u,v); e != INVALID; e = findEdge(g,u,v,e)) {
-///     e = findEdge(g,u,v,e)) {
 ///   ...
 /// }
 ///\endcode
 ///
+/// \note \ref ConEdgeIt provides iterator interface for the same
+/// functionality.
+///
 ///\sa ConEdgeIt
 template <typename Graph>
 inline typename Graph::Edge
 findEdge(const Graph &g, typename Graph::Node u, typename Graph::Node v,
 typename Graph::Edge p = INVALID) {
 return _core_bits::FindEdgeSelector<Graph>::find(g, u, v, p);
 }
-/// \brief Iterator for iterating on edges connected the same nodes.
+/// \brief Iterator for iterating on parallel edges connecting the same nodes.
 ///
-/// Iterator for iterating on edges connected the same nodes. It is
+/// Iterator for iterating on parallel edges connecting the same nodes.
-/// higher level interface for the findEdge() function. You can
+/// It is a higher level interface for the findEdge() function. You can
 /// use it the following way:
 ///\code
-/// for (ConEdgeIt<Graph> it(g, src, trg); it != INVALID; ++it) {
+/// for (ConEdgeIt<Graph> it(g, u, v); it != INVALID; ++it) {
 ///   ...
 /// }
 ///\endcode
 ///
 ///\sa findEdge()
 typedef typename Graph::Edge Edge;
 typedef typename Graph::Node Node;
 /// \brief Constructor.
 ///
-/// Construct a new ConEdgeIt iterating on the edges which
+/// Construct a new ConEdgeIt iterating on the edges that
-/// connects the \c u and \c v node.
+/// connects nodes \c u and \c v.
 ConEdgeIt(const Graph& g, Node u, Node v) : _graph(g) {
 Parent::operator=(findEdge(_graph, u, v));
 }
 /// \brief Constructor.
 ///
-/// Construct a new ConEdgeIt which continues the iterating from
+/// Construct a new ConEdgeIt that continues iterating from edge \c e.
-/// the \c e edge.
 ConEdgeIt(const Graph& g, Edge e) : Parent(e), _graph(g) {}
 /// \brief Increment operator.
 ///
 /// It increments the iterator and gives back the next edge.
 private:
 const Graph& _graph;
 };
-///Dynamic arc look up between given endpoints.
+///Dynamic arc look-up between given endpoints.
 ///Using this class, you can find an arc in a digraph from a given
-///source to a given target in amortized time <em>O(log</em>d<em>)</em>,
+///source to a given target in amortized time <em>O</em>(log<em>d</em>),
 ///where <em>d</em> is the out-degree of the source node.
 ///
 ///It is possible to find \e all parallel arcs between two nodes with
 ///the \c operator() member.
 ///
-///See the \ref ArcLookUp and \ref AllArcLookUp classes if your
+///This is a dynamic data structure. Consider to use \ref ArcLookUp or
-///digraph is not changed so frequently.
+///\ref AllArcLookUp if your digraph is not changed so frequently.
 ///
-///This class uses a self-adjusting binary search tree, Sleator's
+///This class uses a self-adjusting binary search tree, the Splay tree
-///and Tarjan's Splay tree for guarantee the logarithmic amortized
+///of Sleator and Tarjan to guarantee the logarithmic amortized
-///time bound for arc lookups. This class also guarantees the
+///time bound for arc look-ups. This class also guarantees the
 ///optimal time bound in a constant factor for any distribution of
 ///queries.
 ///
 ///\tparam G The type of the underlying digraph.
 ///
 public:
 ///Find an arc between two nodes.
 ///Find an arc between two nodes.
-///\param s The source node
+///\param s The source node.
-///\param t The target node
+///\param t The target node.
 ///\param p The previous arc between \c s and \c t. It it is INVALID or
 ///not given, the operator finds the first appropriate arc.
 ///\return An arc from \c s to \c t after \c p or
 ///\ref INVALID if there is no more.
 ///
 ///For example, you can count the number of arcs from \c u to \c v in the
 ///following way.
 ///\code
 ///DynArcLookUp<ListDigraph> ae(g);
 ///...
-///int n=0;
+///int n = 0;
-///for(Arc e=ae(u,v);e!=INVALID;e=ae(u,v,e)) n++;
+///for(Arc a = ae(u,v); a != INVALID; a = ae(u,v,a)) n++;
 ///\endcode
 ///
-///Finding the arcs take at most <em>O(</em>log<em>d)</em>
+///Finding the arcs take at most <em>O</em>(log<em>d</em>)
 ///amortized time, specifically, the time complexity of the lookups
 ///is equal to the optimal search tree implementation for the
 ///current query distribution in a constant factor.
 ///
 ///\note This is a dynamic data structure, therefore the data
-///structure is updated after each graph alteration. However,
+///structure is updated after each graph alteration. Thus although
-///theoretically this data structure is faster than \c ArcLookUp
+///this data structure is theoretically faster than \ref ArcLookUp
-///or AllEdgeLookup, but it often provides worse performance than
+///and \ref AllArcLookup, it often provides worse performance than
 ///them.
-///
 Arc operator()(Node s, Node t, Arc p = INVALID) const  {
 if (p == INVALID) {
 Arc a = _head[s];
 if (a == INVALID) return INVALID;
 Arc r = INVALID;
 }
 }
 };
-///Fast arc look up between given endpoints.
+///Fast arc look-up between given endpoints.
 ///Using this class, you can find an arc in a digraph from a given
-///source to a given target in time <em>O(log d)</em>,
+///source to a given target in time <em>O</em>(log<em>d</em>),
 ///where <em>d</em> is the out-degree of the source node.
 ///
 ///It is not possible to find \e all parallel arcs between two nodes.
 ///Use \ref AllArcLookUp for this purpose.
 ///
-///\warning This class is static, so you should refresh() (or at least
+///\warning This class is static, so you should call refresh() (or at
-///refresh(Node)) this data structure
+///least refresh(Node)) to refresh this data structure whenever the
-///whenever the digraph changes. This is a time consuming (superlinearly
+///digraph changes. This is a time consuming (superlinearly proportional
-///proportional (<em>O(m</em>log<em>m)</em>) to the number of arcs).
+///(<em>O</em>(<em>m</em> log<em>m</em>)) to the number of arcs).
 ///
 ///\tparam G The type of the underlying digraph.
 ///
 ///\sa DynArcLookUp
 ///\sa AllArcLookUp
 _left[me] = a<m?refreshRec(v,a,m-1):INVALID;
 _right[me] = m<b?refreshRec(v,m+1,b):INVALID;
 return me;
 }
 public:
-///Refresh the data structure at a node.
+///Refresh the search data structure at a node.
 ///Build up the search database of node \c n.
 ///
-///It runs in time <em>O(d</em>log<em>d)</em>, where <em>d</em> is
+///It runs in time <em>O</em>(<em>d</em> log<em>d</em>), where <em>d</em>
-///the number of the outgoing arcs of \c n.
+///is the number of the outgoing arcs of \c n.
 void refresh(Node n)
 {
 std::vector<Arc> v;
 for(OutArcIt e(_g,n);e!=INVALID;++e) v.push_back(e);
 if(v.size()) {
 ///Refresh the full data structure.
 ///Build up the full search database. In fact, it simply calls
 ///\ref refresh(Node) "refresh(n)" for each node \c n.
 ///
-///It runs in time <em>O(m</em>log<em>D)</em>, where <em>m</em> is
+///It runs in time <em>O</em>(<em>m</em> log<em>D</em>), where <em>m</em> is
-///the number of the arcs of \c n and <em>D</em> is the maximum
+///the number of the arcs in the digraph and <em>D</em> is the maximum
 ///out-degree of the digraph.
 void refresh()
 {
 for(NodeIt n(_g);n!=INVALID;++n) refresh(n);
 }
 ///Find an arc between two nodes.
-///Find an arc between two nodes in time <em>O(</em>log<em>d)</em>, where
+///Find an arc between two nodes in time <em>O</em>(log<em>d</em>), where
-/// <em>d</em> is the number of outgoing arcs of \c s.
+///<em>d</em> is the number of outgoing arcs of \c s.
-///\param s The source node
+///\param s The source node.
-///\param t The target node
+///\param t The target node.
 ///\return An arc from \c s to \c t if there exists,
 ///\ref INVALID otherwise.
 ///
 ///\warning If you change the digraph, refresh() must be called before using
 ///this operator. If you change the outgoing arcs of
-///a single node \c n, then
+///a single node \c n, then \ref refresh(Node) "refresh(n)" is enough.
-///\ref refresh(Node) "refresh(n)" is enough.
-///
 Arc operator()(Node s, Node t) const
 {
 Arc e;
 for(e=_head[s];
 e!=INVALID&&_g.target(e)!=t;
 return e;
 }
 };
-///Fast look up of all arcs between given endpoints.
+///Fast look-up of all arcs between given endpoints.
 ///This class is the same as \ref ArcLookUp, with the addition
-///that it makes it possible to find all arcs between given endpoints.
+///that it makes it possible to find all parallel arcs between given
-///
+///endpoints.
-///\warning This class is static, so you should refresh() (or at least
+///
-///refresh(Node)) this data structure
+///\warning This class is static, so you should call refresh() (or at
-///whenever the digraph changes. This is a time consuming (superlinearly
+///least refresh(Node)) to refresh this data structure whenever the
-///proportional (<em>O(m</em>log<em>m)</em>) to the number of arcs).
+///digraph changes. This is a time consuming (superlinearly proportional
+///(<em>O</em>(<em>m</em> log<em>m</em>)) to the number of arcs).
 ///
 ///\tparam G The type of the underlying digraph.
 ///
 ///\sa DynArcLookUp
 ///\sa ArcLookUp
 Arc refreshNext(Arc head,Arc next=INVALID)
 {
 if(head==INVALID) return next;
 else {
 next=refreshNext(_right[head],next);
-//         _next[head]=next;
 _next[head]=( next!=INVALID && _g.target(next)==_g.target(head))
 ? next : INVALID;
 return refreshNext(_left[head],head);
 }
 }
 ///Refresh the data structure at a node.
 ///Build up the search database of node \c n.
 ///
-///It runs in time <em>O(d</em>log<em>d)</em>, where <em>d</em> is
+///It runs in time <em>O</em>(<em>d</em> log<em>d</em>), where <em>d</em> is
 ///the number of the outgoing arcs of \c n.
 void refresh(Node n)
 {
 ArcLookUp<G>::refresh(n);
 refreshNext(_head[n]);
 }
 ///Refresh the full data structure.
 ///Build up the full search database. In fact, it simply calls
 ///\ref refresh(Node) "refresh(n)" for each node \c n.
 ///
-///It runs in time <em>O(m</em>log<em>D)</em>, where <em>m</em> is
+///It runs in time <em>O</em>(<em>m</em> log<em>D</em>), where <em>m</em> is
-///the number of the arcs of \c n and <em>D</em> is the maximum
+///the number of the arcs in the digraph and <em>D</em> is the maximum
 ///out-degree of the digraph.
 void refresh()
 {
 for(NodeIt n(_g);n!=INVALID;++n) refresh(_head[n]);
 }
 ///Find an arc between two nodes.
 ///Find an arc between two nodes.
-///\param s The source node
+///\param s The source node.
-///\param t The target node
+///\param t The target node.
 ///\param prev The previous arc between \c s and \c t. It it is INVALID or
 ///not given, the operator finds the first appropriate arc.
 ///\return An arc from \c s to \c t after \c prev or
 ///\ref INVALID if there is no more.
 ///
 ///For example, you can count the number of arcs from \c u to \c v in the
 ///following way.
 ///\code
 ///AllArcLookUp<ListDigraph> ae(g);
 ///...
-///int n=0;
+///int n = 0;
-///for(Arc e=ae(u,v);e!=INVALID;e=ae(u,v,e)) n++;
+///for(Arc a = ae(u,v); a != INVALID; a=ae(u,v,a)) n++;
 ///\endcode
 ///
-///Finding the first arc take <em>O(</em>log<em>d)</em> time, where
+///Finding the first arc take <em>O</em>(log<em>d</em>) time, where
-/// <em>d</em> is the number of outgoing arcs of \c s. Then, the
+///<em>d</em> is the number of outgoing arcs of \c s. Then, the
 ///consecutive arcs are found in constant time.
 ///
 ///\warning If you change the digraph, refresh() must be called before using
 ///this operator. If you change the outgoing arcs of
-///a single node \c n, then
+///a single node \c n, then \ref refresh(Node) "refresh(n)" is enough.
-///\ref refresh(Node) "refresh(n)" is enough.
 ///
 #ifdef DOXYGEN
 Arc operator()(Node s, Node t, Arc prev=INVALID) const {}
 #else
 using ArcLookUp<G>::operator() ;

changeset 316	689f24ee83e6
parent 233	28239207a8a3
child 300	8c05947fc107