INSTALL
author Alpar Juttner <alpar@cs.elte.hu>
Wed, 18 Mar 2009 16:18:05 +0000
changeset 550 20e3acc1a757
parent 318 1e2d6ca80793
child 564 eda12d8ac953
permissions -rw-r--r--
Switch on warnings when compiling the lib
     1 Installation Instructions
     2 =========================
     3 
     4 Since you are reading this I assume you already obtained one of the release
     5 tarballs and successfully extracted it. The latest version of LEMON is
     6 available at our web page (http://lemon.cs.elte.hu/).
     7 
     8 LEMON provides two different build environments, one is based on "autotool",
     9 while the other is based on "cmake". This file contains instructions only for
    10 the former one, which is the recommended build environment on Linux, Mac OSX
    11 and other unices or if you use Cygwin on Windows. For cmake installation
    12 instructions visit http://lemon.cs.elte.hu.
    13 
    14 In order to install LEMON from the extracted source tarball you have to
    15 issue the following commands:
    16 
    17    1. `cd lemon-x.y.z'
    18 
    19       This command changes to the directory which was created when you
    20       extracted the sources. The x.y.z part is a version number.
    21 
    22    2. `./configure'
    23 
    24       This command runs the configure shell script, which does some checks and
    25       creates the makefiles.
    26 
    27    3. `make'
    28 
    29       This command compiles the non-template part of LEMON into libemon.a
    30       file. It also compiles the programs in the tools and demo subdirectories
    31       when enabled.
    32 
    33    4. `make check'
    34 
    35       This step is optional, but recommended. It runs the test programs that
    36       we developed for LEMON to check whether the library works properly on
    37       your platform.
    38 
    39    5. `make install'
    40 
    41       This command installs LEMON under /usr/local (you will need root
    42       privileges to be able to do that). If you want to install it to some
    43       other location, then pass the --prefix=DIRECTORY flag to configure in
    44       step 2. For example: `./configure --prefix=/home/username/lemon'.
    45 
    46    6. `make install-html'
    47 
    48       This command installs the documentation under share/doc/lemon/docs. The
    49       generated documentation is included in the tarball. If you want to
    50       generate it yourself, then run `make html'. Note that for this you need
    51       to have the following programs installed: Doxygen, Graphviz, Ghostscript,
    52       Latex.
    53 
    54 
    55 Configure Options and Variables
    56 ===============================
    57 
    58 In step 2 you can customize the actions of configure by setting variables
    59 and passing options to it. This can be done like this:
    60 `./configure [OPTION]... [VARIABLE=VALUE]...'
    61 
    62 Below you will find some useful variables and options (see `./configure --help'
    63 for more):
    64 
    65 CXX='comp'
    66 
    67   Change the C++ compiler to 'comp'.
    68 
    69 CXXFLAGS='flags'
    70 
    71   Pass the 'flags' to the compiler. For example CXXFLAGS='-O3 -march=pentium-m'
    72   turns on generation of aggressively optimized Pentium-M specific code.
    73 
    74 --prefix=PREFIX
    75 
    76   Set the installation prefix to PREFIX. By default it is /usr/local.
    77 
    78 --enable-demo
    79 
    80    Build the examples in the demo subdirectory.
    81 
    82 --disable-demo
    83 
    84    Do not build the examples in the demo subdirectory (default).
    85 
    86 --enable-tools
    87 
    88    Build the programs in the tools subdirectory (default).
    89 
    90 --disable-tools
    91 
    92    Do not build the programs in the tools subdirectory.
    93 
    94 --with-glpk[=PREFIX]
    95 
    96    Enable GLPK support (default). You should specify the prefix too if
    97    you installed GLPK to some non-standard location (e.g. your home
    98    directory). If it is not found, GLPK support will be disabled.
    99 
   100 --with-glpk-includedir=DIR
   101 
   102    The directory where the GLPK header files are located. This is only
   103    useful when the GLPK headers and libraries are not under the same
   104    prefix (which is unlikely).
   105 
   106 --with-glpk-libdir=DIR
   107 
   108    The directory where the GLPK libraries are located. This is only
   109    useful when the GLPK headers and libraries are not under the same
   110    prefix (which is unlikely).
   111 
   112 --without-glpk
   113 
   114    Disable GLPK support.
   115 
   116 --with-cplex[=PREFIX]
   117 
   118    Enable CPLEX support (default). You should specify the prefix too
   119    if you installed CPLEX to some non-standard location
   120    (e.g. /opt/ilog/cplex75). If it is not found, CPLEX support will be
   121    disabled.
   122 
   123 --with-cplex-includedir=DIR
   124 
   125    The directory where the CPLEX header files are located. This is
   126    only useful when the CPLEX headers and libraries are not under the
   127    same prefix (e.g.  /usr/local/cplex/cplex75/include).
   128 
   129 --with-cplex-libdir=DIR
   130 
   131    The directory where the CPLEX libraries are located. This is only
   132    useful when the CPLEX headers and libraries are not under the same
   133    prefix (e.g.
   134    /usr/local/cplex/cplex75/lib/i86_linux2_glibc2.2_gcc3.0/static_pic_mt).
   135 
   136 --without-cplex
   137 
   138    Disable CPLEX support.
   139 
   140 --with-soplex[=PREFIX]
   141 
   142    Enable SoPlex support (default). You should specify the prefix too if
   143    you installed SoPlex to some non-standard location (e.g. your home
   144    directory). If it is not found, SoPlex support will be disabled.
   145 
   146 --with-soplex-includedir=DIR
   147 
   148    The directory where the SoPlex header files are located. This is only
   149    useful when the SoPlex headers and libraries are not under the same
   150    prefix (which is unlikely).
   151 
   152 --with-soplex-libdir=DIR
   153 
   154    The directory where the SoPlex libraries are located. This is only
   155    useful when the SoPlex headers and libraries are not under the same
   156    prefix (which is unlikely).
   157 
   158 --without-soplex
   159 
   160    Disable SoPlex support.