INSTALL
author Balazs Dezso <deba@inf.elte.hu>
Tue, 02 Dec 2008 21:40:33 +0100
changeset 458 7afc121e0689
parent 245 da1d220b176b
child 504 07a549a6b9bf
permissions -rw-r--r--
Port LP and MIP solvers from SVN -r3509 (#44)
     1 Installation Instructions
     2 =========================
     3 
     4 Since you are reading this I assume you already obtained one of the release
     5 tarballs and successfully extracted it. The latest version of LEMON is
     6 available at our web page (http://lemon.cs.elte.hu/).
     7 
     8 In order to install LEMON from the extracted source tarball you have to
     9 issue the following commands:
    10 
    11    1. `cd lemon-x.y.z'
    12 
    13       This command changes to the directory which was created when you
    14       extracted the sources. The x.y.z part is a version number.
    15 
    16    2. `./configure'
    17 
    18       This command runs the configure shell script, which does some checks and
    19       creates the makefiles.
    20 
    21    3. `make'
    22 
    23       This command compiles the non-template part of LEMON into libemon.a
    24       file. It also compiles the programs in the tools and demo subdirectories
    25       when enabled.
    26 
    27    4. `make check'
    28 
    29       This step is optional, but recommended. It runs the test programs that
    30       we developed for LEMON to check whether the library works properly on
    31       your platform.
    32 
    33    5. `make install'
    34 
    35       This command installs LEMON under /usr/local (you will need root
    36       privileges to be able to do that). If you want to install it to some
    37       other location, then pass the --prefix=DIRECTORY flag to configure in
    38       step 2. For example: `./configure --prefix=/home/username/lemon'.
    39 
    40    6. `make install-html'
    41 
    42       This command installs the documentation under share/doc/lemon/docs. The
    43       generated documentation is included in the tarball. If you want to
    44       generate it yourself, then run `make html'. Note that for this you need
    45       to have the following programs installed: Doxygen, Graphviz, Ghostscript,
    46       Latex.
    47 
    48 
    49 Configure Options and Variables
    50 ===============================
    51 
    52 In step 2 you can customize the actions of configure by setting variables
    53 and passing options to it. This can be done like this:
    54 `./configure [OPTION]... [VARIABLE=VALUE]...'
    55 
    56 Below you will find some useful variables and options (see `./configure --help'
    57 for more):
    58 
    59 CXX='comp'
    60 
    61   Change the C++ compiler to 'comp'.
    62 
    63 CXXFLAGS='flags'
    64 
    65   Pass the 'flags' to the compiler. For example CXXFLAGS='-O3 -march=pentium-m'
    66   turns on generation of aggressively optimized Pentium-M specific code.
    67 
    68 --prefix=PREFIX
    69 
    70   Set the installation prefix to PREFIX. By default it is /usr/local.
    71 
    72 --enable-demo
    73 
    74    Build the examples in the demo subdirectory.
    75 
    76 --disable-demo
    77 
    78    Do not build the examples in the demo subdirectory (default).
    79 
    80 --enable-tools
    81 
    82    Build the programs in the tools subdirectory (default).
    83 
    84 --disable-tools
    85 
    86    Do not build the programs in the tools subdirectory.
    87 
    88 --with-glpk[=PREFIX]
    89 
    90    Enable GLPK support (default). You should specify the prefix too if
    91    you installed GLPK to some non-standard location (e.g. your home
    92    directory). If it is not found, GLPK support will be disabled.
    93 
    94 --with-glpk-includedir=DIR
    95 
    96    The directory where the GLPK header files are located. This is only
    97    useful when the GLPK headers and libraries are not under the same
    98    prefix (which is unlikely).
    99 
   100 --with-glpk-libdir=DIR
   101 
   102    The directory where the GLPK libraries are located. This is only
   103    useful when the GLPK headers and libraries are not under the same
   104    prefix (which is unlikely).
   105 
   106 --without-glpk
   107 
   108    Disable GLPK support.
   109 
   110 --with-cplex[=PREFIX]
   111 
   112    Enable CPLEX support (default). You should specify the prefix too
   113    if you installed CPLEX to some non-standard location
   114    (e.g. /opt/ilog/cplex75). If it is not found, CPLEX support will be
   115    disabled.
   116 
   117 --with-cplex-includedir=DIR
   118 
   119    The directory where the CPLEX header files are located. This is
   120    only useful when the CPLEX headers and libraries are not under the
   121    same prefix (e.g.  /usr/local/cplex/cplex75/include).
   122 
   123 --with-cplex-libdir=DIR
   124 
   125    The directory where the CPLEX libraries are located. This is only
   126    useful when the CPLEX headers and libraries are not under the same
   127    prefix (e.g.
   128    /usr/local/cplex/cplex75/lib/i86_linux2_glibc2.2_gcc3.0/static_pic_mt).
   129 
   130 --without-cplex
   131 
   132    Disable CPLEX support.
   133 
   134 --with-soplex[=PREFIX]
   135 
   136    Enable SoPlex support (default). You should specify the prefix too if
   137    you installed SoPlex to some non-standard location (e.g. your home
   138    directory). If it is not found, SoPlex support will be disabled.
   139 
   140 --with-soplex-includedir=DIR
   141 
   142    The directory where the SoPlex header files are located. This is only
   143    useful when the SoPlex headers and libraries are not under the same
   144    prefix (which is unlikely).
   145 
   146 --with-soplex-libdir=DIR
   147 
   148    The directory where the SoPlex libraries are located. This is only
   149    useful when the SoPlex headers and libraries are not under the same
   150    prefix (which is unlikely).
   151 
   152 --without-soplex
   153 
   154    Disable SoPlex support.