COIN-OR::LEMON - Graph Library

source: lemon-0.x/doc/Doxyfile.in @ 1304:c9c2e90b2342

Last change on this file since 1304:c9c2e90b2342 was 1304:c9c2e90b2342, checked in by Akos Ladanyi, 15 years ago

Merged my branch (branches/akos) changes r1654:1740 into the trunk.

File size: 49.8 KB
Line 
1# Doxyfile 1.4.2
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project
5#
6# All text after a hash (#) is considered a comment and will be ignored
7# The format is:
8#       TAG = value [value, ...]
9# For lists items can also be appended using:
10#       TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ")
12
13#---------------------------------------------------------------------------
14# Project related configuration options
15#---------------------------------------------------------------------------
16
17# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
18# by quotes) that should identify the project.
19
20PROJECT_NAME           = @PACKAGE_NAME@
21
22# The PROJECT_NUMBER tag can be used to enter a project or revision number.
23# This could be handy for archiving the generated documentation or
24# if some version control system is used.
25
26PROJECT_NUMBER         = @PACKAGE_VERSION@
27
28# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
29# base path where the generated documentation will be put.
30# If a relative path is entered, it will be relative to the location
31# where doxygen was started. If left blank the current directory will be used.
32
33OUTPUT_DIRECTORY       =
34
35# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
36# 4096 sub-directories (in 2 levels) under the output directory of each output
37# format and will distribute the generated files over these directories.
38# Enabling this option can be useful when feeding doxygen a huge amount of
39# source files, where putting all generated files in the same directory would
40# otherwise cause performance problems for the file system.
41
42CREATE_SUBDIRS         = NO
43
44# The OUTPUT_LANGUAGE tag is used to specify the language in which all
45# documentation generated by doxygen is written. Doxygen will use this
46# information to generate all constant output in the proper language.
47# The default language is English, other supported languages are:
48# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
49# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
50# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
51# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
52# Swedish, and Ukrainian.
53
54OUTPUT_LANGUAGE        = English
55
56# This tag can be used to specify the encoding used in the generated output.
57# The encoding is not always determined by the language that is chosen,
58# but also whether or not the output is meant for Windows or non-Windows users.
59# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
60# forces the Windows encoding (this is the default for the Windows binary),
61# whereas setting the tag to NO uses a Unix-style encoding (the default for
62# all platforms other than Windows).
63
64USE_WINDOWS_ENCODING   = NO
65
66# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
67# include brief member descriptions after the members that are listed in
68# the file and class documentation (similar to JavaDoc).
69# Set to NO to disable this.
70
71BRIEF_MEMBER_DESC      = YES
72
73# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
74# the brief description of a member or function before the detailed description.
75# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
76# brief descriptions will be completely suppressed.
77
78REPEAT_BRIEF           = NO
79
80# This tag implements a quasi-intelligent brief description abbreviator
81# that is used to form the text in various listings. Each string
82# in this list, if found as the leading text of the brief description, will be
83# stripped from the text and the result after processing the whole list, is
84# used as the annotated text. Otherwise, the brief description is used as-is.
85# If left blank, the following values are used ("$name" is automatically
86# replaced with the name of the entity): "The $name class" "The $name widget"
87# "The $name file" "is" "provides" "specifies" "contains"
88# "represents" "a" "an" "the"
89
90ABBREVIATE_BRIEF       =
91
92# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
93# Doxygen will generate a detailed section even if there is only a brief
94# description.
95
96ALWAYS_DETAILED_SEC    = NO
97
98# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
99# inherited members of a class in the documentation of that class as if those
100# members were ordinary class members. Constructors, destructors and assignment
101# operators of the base classes will not be shown.
102
103INLINE_INHERITED_MEMB  = NO
104
105# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
106# path before files name in the file list and in the header files. If set
107# to NO the shortest path that makes the file name unique will be used.
108
109FULL_PATH_NAMES        = YES
110
111# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
112# can be used to strip a user-defined part of the path. Stripping is
113# only done if one of the specified strings matches the left-hand part of
114# the path. The tag can be used to show relative paths in the file list.
115# If left blank the directory from which doxygen is run is used as the
116# path to strip.
117
118STRIP_FROM_PATH        = ../src
119
120# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
121# the path mentioned in the documentation of a class, which tells
122# the reader which header file to include in order to use a class.
123# If left blank only the name of the header file containing the class
124# definition is used. Otherwise one should specify the include paths that
125# are normally passed to the compiler using the -I flag.
126
127STRIP_FROM_INC_PATH    = ../src
128
129# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
130# (but less readable) file names. This can be useful is your file systems
131# doesn't support long names like on DOS, Mac, or CD-ROM.
132
133SHORT_NAMES            = NO
134
135# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
136# will interpret the first line (until the first dot) of a JavaDoc-style
137# comment as the brief description. If set to NO, the JavaDoc
138# comments will behave just like the Qt-style comments (thus requiring an
139# explicit @brief command for a brief description.
140
141JAVADOC_AUTOBRIEF      = NO
142
143# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
144# treat a multi-line C++ special comment block (i.e. a block of //! or ///
145# comments) as a brief description. This used to be the default behaviour.
146# The new default is to treat a multi-line C++ comment block as a detailed
147# description. Set this tag to YES if you prefer the old behaviour instead.
148
149MULTILINE_CPP_IS_BRIEF = NO
150
151# If the DETAILS_AT_TOP tag is set to YES then Doxygen
152# will output the detailed description near the top, like JavaDoc.
153# If set to NO, the detailed description appears after the member
154# documentation.
155
156DETAILS_AT_TOP         = YES
157
158# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
159# member inherits the documentation from any documented member that it
160# re-implements.
161
162INHERIT_DOCS           = NO
163
164# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
165# tag is set to YES, then doxygen will reuse the documentation of the first
166# member in the group (if any) for the other members of the group. By default
167# all members of a group must be documented explicitly.
168
169DISTRIBUTE_GROUP_DOC   = NO
170
171# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
172# a new page for each member. If set to NO, the documentation of a member will
173# be part of the file/class/namespace that contains it.
174
175SEPARATE_MEMBER_PAGES  = NO
176
177# The TAB_SIZE tag can be used to set the number of spaces in a tab.
178# Doxygen uses this value to replace tabs by spaces in code fragments.
179
180TAB_SIZE               = 8
181
182# This tag can be used to specify a number of aliases that acts
183# as commands in the documentation. An alias has the form "name=value".
184# For example adding "sideeffect=\par Side Effects:\n" will allow you to
185# put the command \sideeffect (or @sideeffect) in the documentation, which
186# will result in a user-defined paragraph with heading "Side Effects:".
187# You can put \n's in the value part of an alias to insert newlines.
188
189ALIASES                =
190
191# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
192# sources only. Doxygen will then generate output that is more tailored for C.
193# For instance, some of the names that are used will be different. The list
194# of all members will be omitted, etc.
195
196OPTIMIZE_OUTPUT_FOR_C  = NO
197
198# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
199# only. Doxygen will then generate output that is more tailored for Java.
200# For instance, namespaces will be presented as packages, qualified scopes
201# will look different, etc.
202
203OPTIMIZE_OUTPUT_JAVA   = NO
204
205# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
206# the same type (for instance a group of public functions) to be put as a
207# subgroup of that type (e.g. under the Public Functions section). Set it to
208# NO to prevent subgrouping. Alternatively, this can be done per class using
209# the \nosubgrouping command.
210
211SUBGROUPING            = YES
212
213#---------------------------------------------------------------------------
214# Build related configuration options
215#---------------------------------------------------------------------------
216
217# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
218# documentation are documented, even if no documentation was available.
219# Private class members and static file members will be hidden unless
220# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
221
222EXTRACT_ALL            = NO
223
224# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
225# will be included in the documentation.
226
227EXTRACT_PRIVATE        = NO
228
229# If the EXTRACT_STATIC tag is set to YES all static members of a file
230# will be included in the documentation.
231
232EXTRACT_STATIC         = NO
233
234# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
235# defined locally in source files will be included in the documentation.
236# If set to NO only classes defined in header files are included.
237
238EXTRACT_LOCAL_CLASSES  = YES
239
240# This flag is only useful for Objective-C code. When set to YES local
241# methods, which are defined in the implementation section but not in
242# the interface are included in the documentation.
243# If set to NO (the default) only methods in the interface are included.
244
245EXTRACT_LOCAL_METHODS  = NO
246
247# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
248# undocumented members of documented classes, files or namespaces.
249# If set to NO (the default) these members will be included in the
250# various overviews, but no documentation section is generated.
251# This option has no effect if EXTRACT_ALL is enabled.
252
253HIDE_UNDOC_MEMBERS     = YES
254
255# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
256# undocumented classes that are normally visible in the class hierarchy.
257# If set to NO (the default) these classes will be included in the various
258# overviews. This option has no effect if EXTRACT_ALL is enabled.
259
260HIDE_UNDOC_CLASSES     = YES
261
262# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
263# friend (class|struct|union) declarations.
264# If set to NO (the default) these declarations will be included in the
265# documentation.
266
267HIDE_FRIEND_COMPOUNDS  = NO
268
269# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
270# documentation blocks found inside the body of a function.
271# If set to NO (the default) these blocks will be appended to the
272# function's detailed documentation block.
273
274HIDE_IN_BODY_DOCS      = NO
275
276# The INTERNAL_DOCS tag determines if documentation
277# that is typed after a \internal command is included. If the tag is set
278# to NO (the default) then the documentation will be excluded.
279# Set it to YES to include the internal documentation.
280
281INTERNAL_DOCS          = NO
282
283# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
284# file names in lower-case letters. If set to YES upper-case letters are also
285# allowed. This is useful if you have classes or files whose names only differ
286# in case and if your file system supports case sensitive file names. Windows
287# and Mac users are advised to set this option to NO.
288
289CASE_SENSE_NAMES       = YES
290
291# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
292# will show members with their full class and namespace scopes in the
293# documentation. If set to YES the scope will be hidden.
294
295HIDE_SCOPE_NAMES       = YES
296
297# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
298# will put a list of the files that are included by a file in the documentation
299# of that file.
300
301SHOW_INCLUDE_FILES     = YES
302
303# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
304# is inserted in the documentation for inline members.
305
306INLINE_INFO            = YES
307
308# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
309# will sort the (detailed) documentation of file and class members
310# alphabetically by member name. If set to NO the members will appear in
311# declaration order.
312
313SORT_MEMBER_DOCS       = NO
314
315# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
316# brief documentation of file, namespace and class members alphabetically
317# by member name. If set to NO (the default) the members will appear in
318# declaration order.
319
320SORT_BRIEF_DOCS        = NO
321
322# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
323# sorted by fully-qualified names, including namespaces. If set to
324# NO (the default), the class list will be sorted only by class name,
325# not including the namespace part.
326# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
327# Note: This option applies only to the class list, not to the
328# alphabetical list.
329
330SORT_BY_SCOPE_NAME     = NO
331
332# The GENERATE_TODOLIST tag can be used to enable (YES) or
333# disable (NO) the todo list. This list is created by putting \todo
334# commands in the documentation.
335
336GENERATE_TODOLIST      = YES
337
338# The GENERATE_TESTLIST tag can be used to enable (YES) or
339# disable (NO) the test list. This list is created by putting \test
340# commands in the documentation.
341
342GENERATE_TESTLIST      = YES
343
344# The GENERATE_BUGLIST tag can be used to enable (YES) or
345# disable (NO) the bug list. This list is created by putting \bug
346# commands in the documentation.
347
348GENERATE_BUGLIST       = YES
349
350# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
351# disable (NO) the deprecated list. This list is created by putting
352# \deprecated commands in the documentation.
353
354GENERATE_DEPRECATEDLIST= YES
355
356# The ENABLED_SECTIONS tag can be used to enable conditional
357# documentation sections, marked by \if sectionname ... \endif.
358
359ENABLED_SECTIONS       =
360
361# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
362# the initial value of a variable or define consists of for it to appear in
363# the documentation. If the initializer consists of more lines than specified
364# here it will be hidden. Use a value of 0 to hide initializers completely.
365# The appearance of the initializer of individual variables and defines in the
366# documentation can be controlled using \showinitializer or \hideinitializer
367# command in the documentation regardless of this setting.
368
369MAX_INITIALIZER_LINES  = 5
370
371# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
372# at the bottom of the documentation of classes and structs. If set to YES the
373# list will mention the files that were used to generate the documentation.
374
375SHOW_USED_FILES        = YES
376
377# If the sources in your project are distributed over multiple directories
378# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
379# in the documentation.
380
381SHOW_DIRECTORIES       = YES
382
383# The FILE_VERSION_FILTER tag can be used to specify a program or script that
384# doxygen should invoke to get the current version for each file (typically from the
385# version control system). Doxygen will invoke the program by executing (via
386# popen()) the command <command> <input-file>, where <command> is the value of
387# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
388# provided by doxygen. Whatever the progam writes to standard output
389# is used as the file version. See the manual for examples.
390
391FILE_VERSION_FILTER    =
392
393#---------------------------------------------------------------------------
394# configuration options related to warning and progress messages
395#---------------------------------------------------------------------------
396
397# The QUIET tag can be used to turn on/off the messages that are generated
398# by doxygen. Possible values are YES and NO. If left blank NO is used.
399
400QUIET                  = NO
401
402# The WARNINGS tag can be used to turn on/off the warning messages that are
403# generated by doxygen. Possible values are YES and NO. If left blank
404# NO is used.
405
406WARNINGS               = YES
407
408# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
409# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
410# automatically be disabled.
411
412WARN_IF_UNDOCUMENTED   = YES
413
414# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
415# potential errors in the documentation, such as not documenting some
416# parameters in a documented function, or documenting parameters that
417# don't exist or using markup commands wrongly.
418
419WARN_IF_DOC_ERROR      = YES
420
421# This WARN_NO_PARAMDOC option can be abled to get warnings for
422# functions that are documented, but have no documentation for their parameters
423# or return value. If set to NO (the default) doxygen will only warn about
424# wrong or incomplete parameter documentation, but not about the absence of
425# documentation.
426
427WARN_NO_PARAMDOC       = NO
428
429# The WARN_FORMAT tag determines the format of the warning messages that
430# doxygen can produce. The string should contain the $file, $line, and $text
431# tags, which will be replaced by the file and line number from which the
432# warning originated and the warning text. Optionally the format may contain
433# $version, which will be replaced by the version of the file (if it could
434# be obtained via FILE_VERSION_FILTER)
435
436WARN_FORMAT            = "$file:$line: $text"
437
438# The WARN_LOGFILE tag can be used to specify a file to which warning
439# and error messages should be written. If left blank the output is written
440# to stderr.
441
442WARN_LOGFILE           = doxygen.log
443
444#---------------------------------------------------------------------------
445# configuration options related to the input files
446#---------------------------------------------------------------------------
447
448# The INPUT tag can be used to specify the files and/or directories that contain
449# documented source files. You may enter file names like "myfile.cpp" or
450# directories like "/usr/src/myproject". Separate the files or directories
451# with spaces.
452
453INPUT                  = mainpage.dox \
454                         getstart.dox \
455                         quicktour.dox \
456                         demoprograms.dox \
457                         graphs.dox \
458                         undir_graphs.dox \
459                         named-param.dox \
460                         maps.dox \
461                         coding_style.dox \
462                         groups.dox \
463                         namespaces.dox \
464                         license.dox \
465                         developers_interface.dox \
466                         graph_io.dox \
467                         dirs.dox \
468                         gwrappers.dox \
469                         ../src/lemon \
470                         ../src/lemon/concept \
471                         ../src/test/test_tools.h
472
473# If the value of the INPUT tag contains directories, you can use the
474# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
475# and *.h) to filter out the source-files in the directories. If left
476# blank the following patterns are tested:
477# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
478# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
479
480FILE_PATTERNS          =
481
482# The RECURSIVE tag can be used to turn specify whether or not subdirectories
483# should be searched for input files as well. Possible values are YES and NO.
484# If left blank NO is used.
485
486RECURSIVE              = NO
487
488# The EXCLUDE tag can be used to specify files and/or directories that should
489# excluded from the INPUT source files. This way you can easily exclude a
490# subdirectory from a directory tree whose root is specified with the INPUT tag.
491
492EXCLUDE                =
493
494# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
495# directories that are symbolic links (a Unix filesystem feature) are excluded
496# from the input.
497
498EXCLUDE_SYMLINKS       = NO
499
500# If the value of the INPUT tag contains directories, you can use the
501# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
502# certain files from those directories.
503
504EXCLUDE_PATTERNS       =
505
506# The EXAMPLE_PATH tag can be used to specify one or more files or
507# directories that contain example code fragments that are included (see
508# the \include command).
509
510EXAMPLE_PATH           = ../src/demo \
511                         ../LICENSE \
512                         .
513
514# If the value of the EXAMPLE_PATH tag contains directories, you can use the
515# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
516# and *.h) to filter out the source-files in the directories. If left
517# blank all files are included.
518
519EXAMPLE_PATTERNS       =
520
521# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
522# searched for input files to be used with the \include or \dontinclude
523# commands irrespective of the value of the RECURSIVE tag.
524# Possible values are YES and NO. If left blank NO is used.
525
526EXAMPLE_RECURSIVE      = NO
527
528# The IMAGE_PATH tag can be used to specify one or more files or
529# directories that contain image that are included in the documentation (see
530# the \image command).
531
532IMAGE_PATH             = images
533
534# The INPUT_FILTER tag can be used to specify a program that doxygen should
535# invoke to filter for each input file. Doxygen will invoke the filter program
536# by executing (via popen()) the command <filter> <input-file>, where <filter>
537# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
538# input file. Doxygen will then use the output that the filter program writes
539# to standard output.  If FILTER_PATTERNS is specified, this tag will be
540# ignored.
541
542INPUT_FILTER           =
543
544# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
545# basis.  Doxygen will compare the file name with each pattern and apply the
546# filter if there is a match.  The filters are a list of the form:
547# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
548# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
549# is applied to all files.
550
551FILTER_PATTERNS        =
552
553# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
554# INPUT_FILTER) will be used to filter the input files when producing source
555# files to browse (i.e. when SOURCE_BROWSER is set to YES).
556
557FILTER_SOURCE_FILES    = NO
558
559#---------------------------------------------------------------------------
560# configuration options related to source browsing
561#---------------------------------------------------------------------------
562
563# If the SOURCE_BROWSER tag is set to YES then a list of source files will
564# be generated. Documented entities will be cross-referenced with these sources.
565# Note: To get rid of all source code in the generated output, make sure also
566# VERBATIM_HEADERS is set to NO.
567
568SOURCE_BROWSER         = YES
569
570# Setting the INLINE_SOURCES tag to YES will include the body
571# of functions and classes directly in the documentation.
572
573INLINE_SOURCES         = NO
574
575# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
576# doxygen to hide any special comment blocks from generated source code
577# fragments. Normal C and C++ comments will always remain visible.
578
579STRIP_CODE_COMMENTS    = YES
580
581# If the REFERENCED_BY_RELATION tag is set to YES (the default)
582# then for each documented function all documented
583# functions referencing it will be listed.
584
585REFERENCED_BY_RELATION = NO
586
587# If the REFERENCES_RELATION tag is set to YES (the default)
588# then for each documented function all documented entities
589# called/used by that function will be listed.
590
591REFERENCES_RELATION    = NO
592
593# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
594# will generate a verbatim copy of the header file for each class for
595# which an include is specified. Set to NO to disable this.
596
597VERBATIM_HEADERS       = YES
598
599#---------------------------------------------------------------------------
600# configuration options related to the alphabetical class index
601#---------------------------------------------------------------------------
602
603# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
604# of all compounds will be generated. Enable this if the project
605# contains a lot of classes, structs, unions or interfaces.
606
607ALPHABETICAL_INDEX     = YES
608
609# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
610# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
611# in which this list will be split (can be a number in the range [1..20])
612
613COLS_IN_ALPHA_INDEX    = 2
614
615# In case all classes in a project start with a common prefix, all
616# classes will be put under the same header in the alphabetical index.
617# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
618# should be ignored while generating the index headers.
619
620IGNORE_PREFIX          =
621
622#---------------------------------------------------------------------------
623# configuration options related to the HTML output
624#---------------------------------------------------------------------------
625
626# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
627# generate HTML output.
628
629GENERATE_HTML          = YES
630
631# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
632# If a relative path is entered the value of OUTPUT_DIRECTORY will be
633# put in front of it. If left blank `html' will be used as the default path.
634
635HTML_OUTPUT            = html
636
637# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
638# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
639# doxygen will generate files with .html extension.
640
641HTML_FILE_EXTENSION    = .html
642
643# The HTML_HEADER tag can be used to specify a personal HTML header for
644# each generated HTML page. If it is left blank doxygen will generate a
645# standard header.
646
647HTML_HEADER            =
648
649# The HTML_FOOTER tag can be used to specify a personal HTML footer for
650# each generated HTML page. If it is left blank doxygen will generate a
651# standard footer.
652
653HTML_FOOTER            =
654
655# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
656# style sheet that is used by each HTML page. It can be used to
657# fine-tune the look of the HTML output. If the tag is left blank doxygen
658# will generate a default style sheet. Note that doxygen will try to copy
659# the style sheet file to the HTML output directory, so don't put your own
660# stylesheet in the HTML output directory as well, or it will be erased!
661
662HTML_STYLESHEET        =
663
664# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
665# files or namespaces will be aligned in HTML using tables. If set to
666# NO a bullet list will be used.
667
668HTML_ALIGN_MEMBERS     = YES
669
670# If the GENERATE_HTMLHELP tag is set to YES, additional index files
671# will be generated that can be used as input for tools like the
672# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
673# of the generated HTML documentation.
674
675GENERATE_HTMLHELP      = NO
676
677# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
678# be used to specify the file name of the resulting .chm file. You
679# can add a path in front of the file if the result should not be
680# written to the html output directory.
681
682CHM_FILE               =
683
684# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
685# be used to specify the location (absolute path including file name) of
686# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
687# the HTML help compiler on the generated index.hhp.
688
689HHC_LOCATION           =
690
691# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
692# controls if a separate .chi index file is generated (YES) or that
693# it should be included in the master .chm file (NO).
694
695GENERATE_CHI           = NO
696
697# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
698# controls whether a binary table of contents is generated (YES) or a
699# normal table of contents (NO) in the .chm file.
700
701BINARY_TOC             = NO
702
703# The TOC_EXPAND flag can be set to YES to add extra items for group members
704# to the contents of the HTML help documentation and to the tree view.
705
706TOC_EXPAND             = NO
707
708# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
709# top of each HTML page. The value NO (the default) enables the index and
710# the value YES disables it.
711
712DISABLE_INDEX          = NO
713
714# This tag can be used to set the number of enum values (range [1..20])
715# that doxygen will group on one line in the generated HTML documentation.
716
717ENUM_VALUES_PER_LINE   = 4
718
719# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
720# generated containing a tree-like index structure (just like the one that
721# is generated for HTML Help). For this to work a browser that supports
722# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
723# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
724# probably better off using the HTML help feature.
725
726GENERATE_TREEVIEW      = YES
727
728# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
729# used to set the initial width (in pixels) of the frame in which the tree
730# is shown.
731
732TREEVIEW_WIDTH         = 250
733
734#---------------------------------------------------------------------------
735# configuration options related to the LaTeX output
736#---------------------------------------------------------------------------
737
738# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
739# generate Latex output.
740
741GENERATE_LATEX         = NO
742
743# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
744# If a relative path is entered the value of OUTPUT_DIRECTORY will be
745# put in front of it. If left blank `latex' will be used as the default path.
746
747LATEX_OUTPUT           = latex
748
749# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
750# invoked. If left blank `latex' will be used as the default command name.
751
752LATEX_CMD_NAME         = latex
753
754# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
755# generate index for LaTeX. If left blank `makeindex' will be used as the
756# default command name.
757
758MAKEINDEX_CMD_NAME     = makeindex
759
760# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
761# LaTeX documents. This may be useful for small projects and may help to
762# save some trees in general.
763
764COMPACT_LATEX          = YES
765
766# The PAPER_TYPE tag can be used to set the paper type that is used
767# by the printer. Possible values are: a4, a4wide, letter, legal and
768# executive. If left blank a4wide will be used.
769
770PAPER_TYPE             = a4wide
771
772# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
773# packages that should be included in the LaTeX output.
774
775EXTRA_PACKAGES         =
776
777# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
778# the generated latex document. The header should contain everything until
779# the first chapter. If it is left blank doxygen will generate a
780# standard header. Notice: only use this tag if you know what you are doing!
781
782LATEX_HEADER           =
783
784# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
785# is prepared for conversion to pdf (using ps2pdf). The pdf file will
786# contain links (just like the HTML output) instead of page references
787# This makes the output suitable for online browsing using a pdf viewer.
788
789PDF_HYPERLINKS         = YES
790
791# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
792# plain latex in the generated Makefile. Set this option to YES to get a
793# higher quality PDF documentation.
794
795USE_PDFLATEX           = YES
796
797# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
798# command to the generated LaTeX files. This will instruct LaTeX to keep
799# running if errors occur, instead of asking the user for help.
800# This option is also used when generating formulas in HTML.
801
802LATEX_BATCHMODE        = NO
803
804# If LATEX_HIDE_INDICES is set to YES then doxygen will not
805# include the index chapters (such as File Index, Compound Index, etc.)
806# in the output.
807
808LATEX_HIDE_INDICES     = NO
809
810#---------------------------------------------------------------------------
811# configuration options related to the RTF output
812#---------------------------------------------------------------------------
813
814# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
815# The RTF output is optimized for Word 97 and may not look very pretty with
816# other RTF readers or editors.
817
818GENERATE_RTF           = NO
819
820# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
821# If a relative path is entered the value of OUTPUT_DIRECTORY will be
822# put in front of it. If left blank `rtf' will be used as the default path.
823
824RTF_OUTPUT             = rtf
825
826# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
827# RTF documents. This may be useful for small projects and may help to
828# save some trees in general.
829
830COMPACT_RTF            = NO
831
832# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
833# will contain hyperlink fields. The RTF file will
834# contain links (just like the HTML output) instead of page references.
835# This makes the output suitable for online browsing using WORD or other
836# programs which support those fields.
837# Note: wordpad (write) and others do not support links.
838
839RTF_HYPERLINKS         = NO
840
841# Load stylesheet definitions from file. Syntax is similar to doxygen's
842# config file, i.e. a series of assignments. You only have to provide
843# replacements, missing definitions are set to their default value.
844
845RTF_STYLESHEET_FILE    =
846
847# Set optional variables used in the generation of an rtf document.
848# Syntax is similar to doxygen's config file.
849
850RTF_EXTENSIONS_FILE    =
851
852#---------------------------------------------------------------------------
853# configuration options related to the man page output
854#---------------------------------------------------------------------------
855
856# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
857# generate man pages
858
859GENERATE_MAN           = NO
860
861# The MAN_OUTPUT tag is used to specify where the man pages will be put.
862# If a relative path is entered the value of OUTPUT_DIRECTORY will be
863# put in front of it. If left blank `man' will be used as the default path.
864
865MAN_OUTPUT             = man
866
867# The MAN_EXTENSION tag determines the extension that is added to
868# the generated man pages (default is the subroutine's section .3)
869
870MAN_EXTENSION          = .3
871
872# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
873# then it will generate one additional man file for each entity
874# documented in the real man page(s). These additional files
875# only source the real man page, but without them the man command
876# would be unable to find the correct page. The default is NO.
877
878MAN_LINKS              = NO
879
880#---------------------------------------------------------------------------
881# configuration options related to the XML output
882#---------------------------------------------------------------------------
883
884# If the GENERATE_XML tag is set to YES Doxygen will
885# generate an XML file that captures the structure of
886# the code including all documentation.
887
888GENERATE_XML           = NO
889
890# The XML_OUTPUT tag is used to specify where the XML pages will be put.
891# If a relative path is entered the value of OUTPUT_DIRECTORY will be
892# put in front of it. If left blank `xml' will be used as the default path.
893
894XML_OUTPUT             = xml
895
896# The XML_SCHEMA tag can be used to specify an XML schema,
897# which can be used by a validating XML parser to check the
898# syntax of the XML files.
899
900XML_SCHEMA             =
901
902# The XML_DTD tag can be used to specify an XML DTD,
903# which can be used by a validating XML parser to check the
904# syntax of the XML files.
905
906XML_DTD                =
907
908# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
909# dump the program listings (including syntax highlighting
910# and cross-referencing information) to the XML output. Note that
911# enabling this will significantly increase the size of the XML output.
912
913XML_PROGRAMLISTING     = YES
914
915#---------------------------------------------------------------------------
916# configuration options for the AutoGen Definitions output
917#---------------------------------------------------------------------------
918
919# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
920# generate an AutoGen Definitions (see autogen.sf.net) file
921# that captures the structure of the code including all
922# documentation. Note that this feature is still experimental
923# and incomplete at the moment.
924
925GENERATE_AUTOGEN_DEF   = NO
926
927#---------------------------------------------------------------------------
928# configuration options related to the Perl module output
929#---------------------------------------------------------------------------
930
931# If the GENERATE_PERLMOD tag is set to YES Doxygen will
932# generate a Perl module file that captures the structure of
933# the code including all documentation. Note that this
934# feature is still experimental and incomplete at the
935# moment.
936
937GENERATE_PERLMOD       = NO
938
939# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
940# the necessary Makefile rules, Perl scripts and LaTeX code to be able
941# to generate PDF and DVI output from the Perl module output.
942
943PERLMOD_LATEX          = NO
944
945# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
946# nicely formatted so it can be parsed by a human reader.  This is useful
947# if you want to understand what is going on.  On the other hand, if this
948# tag is set to NO the size of the Perl module output will be much smaller
949# and Perl will parse it just the same.
950
951PERLMOD_PRETTY         = YES
952
953# The names of the make variables in the generated doxyrules.make file
954# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
955# This is useful so different doxyrules.make files included by the same
956# Makefile don't overwrite each other's variables.
957
958PERLMOD_MAKEVAR_PREFIX =
959
960#---------------------------------------------------------------------------
961# Configuration options related to the preprocessor   
962#---------------------------------------------------------------------------
963
964# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
965# evaluate all C-preprocessor directives found in the sources and include
966# files.
967
968ENABLE_PREPROCESSING   = YES
969
970# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
971# names in the source code. If set to NO (the default) only conditional
972# compilation will be performed. Macro expansion can be done in a controlled
973# way by setting EXPAND_ONLY_PREDEF to YES.
974
975MACRO_EXPANSION        = NO
976
977# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
978# then the macro expansion is limited to the macros specified with the
979# PREDEFINED and EXPAND_AS_PREDEFINED tags.
980
981EXPAND_ONLY_PREDEF     = NO
982
983# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
984# in the INCLUDE_PATH (see below) will be search if a #include is found.
985
986SEARCH_INCLUDES        = YES
987
988# The INCLUDE_PATH tag can be used to specify one or more directories that
989# contain include files that are not input files but should be processed by
990# the preprocessor.
991
992INCLUDE_PATH           =
993
994# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
995# patterns (like *.h and *.hpp) to filter out the header-files in the
996# directories. If left blank, the patterns specified with FILE_PATTERNS will
997# be used.
998
999INCLUDE_FILE_PATTERNS  =
1000
1001# The PREDEFINED tag can be used to specify one or more macro names that
1002# are defined before the preprocessor is started (similar to the -D option of
1003# gcc). The argument of the tag is a list of macros of the form: name
1004# or name=definition (no spaces). If the definition and the = are
1005# omitted =1 is assumed. To prevent a macro definition from being
1006# undefined via #undef or recursively expanded use the := operator
1007# instead of the = operator.
1008
1009PREDEFINED             = DOXYGEN
1010
1011# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1012# this tag can be used to specify a list of macro names that should be expanded.
1013# The macro definition that is found in the sources will be used.
1014# Use the PREDEFINED tag if you want to use a different macro definition.
1015
1016EXPAND_AS_DEFINED      =
1017
1018# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1019# doxygen's preprocessor will remove all function-like macros that are alone
1020# on a line, have an all uppercase name, and do not end with a semicolon. Such
1021# function macros are typically used for boiler-plate code, and will confuse
1022# the parser if not removed.
1023
1024SKIP_FUNCTION_MACROS   = YES
1025
1026#---------------------------------------------------------------------------
1027# Configuration::additions related to external references   
1028#---------------------------------------------------------------------------
1029
1030# The TAGFILES option can be used to specify one or more tagfiles.
1031# Optionally an initial location of the external documentation
1032# can be added for each tagfile. The format of a tag file without
1033# this location is as follows:
1034#   TAGFILES = file1 file2 ...
1035# Adding location for the tag files is done as follows:
1036#   TAGFILES = file1=loc1 "file2 = loc2" ...
1037# where "loc1" and "loc2" can be relative or absolute paths or
1038# URLs. If a location is present for each tag, the installdox tool
1039# does not have to be run to correct the links.
1040# Note that each tag file must have a unique name
1041# (where the name does NOT include the path)
1042# If a tag file is not located in the directory in which doxygen
1043# is run, you must also specify the path to the tagfile here.
1044
1045TAGFILES               =
1046
1047# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1048# a tag file that is based on the input files it reads.
1049
1050GENERATE_TAGFILE       =
1051
1052# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1053# in the class index. If set to NO only the inherited external classes
1054# will be listed.
1055
1056ALLEXTERNALS           = NO
1057
1058# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1059# in the modules index. If set to NO, only the current project's groups will
1060# be listed.
1061
1062EXTERNAL_GROUPS        = YES
1063
1064# The PERL_PATH should be the absolute path and name of the perl script
1065# interpreter (i.e. the result of `which perl').
1066
1067PERL_PATH              = /usr/bin/perl
1068
1069#---------------------------------------------------------------------------
1070# Configuration options related to the dot tool   
1071#---------------------------------------------------------------------------
1072
1073# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1074# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1075# or super classes. Setting the tag to NO turns the diagrams off. Note that
1076# this option is superseded by the HAVE_DOT option below. This is only a
1077# fallback. It is recommended to install and use dot, since it yields more
1078# powerful graphs.
1079
1080CLASS_DIAGRAMS         = YES
1081
1082# If set to YES, the inheritance and collaboration graphs will hide
1083# inheritance and usage relations if the target is undocumented
1084# or is not a class.
1085
1086HIDE_UNDOC_RELATIONS   = NO
1087
1088# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1089# available from the path. This tool is part of Graphviz, a graph visualization
1090# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1091# have no effect if this option is set to NO (the default)
1092
1093HAVE_DOT               = YES
1094
1095# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1096# will generate a graph for each documented class showing the direct and
1097# indirect inheritance relations. Setting this tag to YES will force the
1098# the CLASS_DIAGRAMS tag to NO.
1099
1100CLASS_GRAPH            = YES
1101
1102# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1103# will generate a graph for each documented class showing the direct and
1104# indirect implementation dependencies (inheritance, containment, and
1105# class references variables) of the class with other documented classes.
1106
1107COLLABORATION_GRAPH    = YES
1108
1109# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1110# will generate a graph for groups, showing the direct groups dependencies
1111
1112GROUP_GRAPHS           = YES
1113
1114# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1115# collaboration diagrams in a style similar to the OMG's Unified Modeling
1116# Language.
1117
1118UML_LOOK               = NO
1119
1120# If set to YES, the inheritance and collaboration graphs will show the
1121# relations between templates and their instances.
1122
1123TEMPLATE_RELATIONS     = YES
1124
1125# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1126# tags are set to YES then doxygen will generate a graph for each documented
1127# file showing the direct and indirect include dependencies of the file with
1128# other documented files.
1129
1130INCLUDE_GRAPH          = YES
1131
1132# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1133# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1134# documented header file showing the documented files that directly or
1135# indirectly include this file.
1136
1137INCLUDED_BY_GRAPH      = YES
1138
1139# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
1140# generate a call dependency graph for every global function or class method.
1141# Note that enabling this option will significantly increase the time of a run.
1142# So in most cases it will be better to enable call graphs for selected
1143# functions only using the \callgraph command.
1144
1145CALL_GRAPH             = YES
1146
1147# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1148# will graphical hierarchy of all classes instead of a textual one.
1149
1150GRAPHICAL_HIERARCHY    = YES
1151
1152# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1153# then doxygen will show the dependencies a directory has on other directories
1154# in a graphical way. The dependency relations are determined by the #include
1155# relations between the files in the directories.
1156
1157DIRECTORY_GRAPH        = YES
1158
1159# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1160# generated by dot. Possible values are png, jpg, or gif
1161# If left blank png will be used.
1162
1163DOT_IMAGE_FORMAT       = png
1164
1165# The tag DOT_PATH can be used to specify the path where the dot tool can be
1166# found. If left blank, it is assumed the dot tool can be found in the path.
1167
1168DOT_PATH               =
1169
1170# The DOTFILE_DIRS tag can be used to specify one or more directories that
1171# contain dot files that are included in the documentation (see the
1172# \dotfile command).
1173
1174DOTFILE_DIRS           =
1175
1176# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
1177# (in pixels) of the graphs generated by dot. If a graph becomes larger than
1178# this value, doxygen will try to truncate the graph, so that it fits within
1179# the specified constraint. Beware that most browsers cannot cope with very
1180# large images.
1181
1182MAX_DOT_GRAPH_WIDTH    = 1024
1183
1184# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
1185# (in pixels) of the graphs generated by dot. If a graph becomes larger than
1186# this value, doxygen will try to truncate the graph, so that it fits within
1187# the specified constraint. Beware that most browsers cannot cope with very
1188# large images.
1189
1190MAX_DOT_GRAPH_HEIGHT   = 1024
1191
1192# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1193# graphs generated by dot. A depth value of 3 means that only nodes reachable
1194# from the root by following a path via at most 3 edges will be shown. Nodes
1195# that lay further from the root node will be omitted. Note that setting this
1196# option to 1 or 2 may greatly reduce the computation time needed for large
1197# code bases. Also note that a graph may be further truncated if the graph's
1198# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
1199# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
1200# the graph is not depth-constrained.
1201
1202MAX_DOT_GRAPH_DEPTH    = 0
1203
1204# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1205# background. This is disabled by default, which results in a white background.
1206# Warning: Depending on the platform used, enabling this option may lead to
1207# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
1208# read).
1209
1210DOT_TRANSPARENT        = NO
1211
1212# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1213# files in one run (i.e. multiple -o and -T options on the command line). This
1214# makes dot run faster, but since only newer versions of dot (>1.8.10)
1215# support this, this feature is disabled by default.
1216
1217DOT_MULTI_TARGETS      = NO
1218
1219# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1220# generate a legend page explaining the meaning of the various boxes and
1221# arrows in the dot generated graphs.
1222
1223GENERATE_LEGEND        = YES
1224
1225# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1226# remove the intermediate dot files that are used to generate
1227# the various graphs.
1228
1229DOT_CLEANUP            = YES
1230
1231#---------------------------------------------------------------------------
1232# Configuration::additions related to the search engine   
1233#---------------------------------------------------------------------------
1234
1235# The SEARCHENGINE tag specifies whether or not a search engine should be
1236# used. If set to NO the values of all tags below this one will be ignored.
1237
1238SEARCHENGINE           = NO
Note: See TracBrowser for help on using the repository browser.