@node The Full Feature Graph Class

@section The Full Feature Graph Class

@cindex Full Feature Graph Class

This section describes what an imaginary full feature graph class knows.

The set of features provided by a real graph implementation is typically

a subset of the features below.

On the other hand, each graph algorithm requires the underlying graph

structure to provide a certain (typically small) set of features in order

to be able to run.

@subsection Declaration

@deftp {Class} {class Graph}

@code{Graph} is the imaginary @emph{full feature graph class}.

@code{G} denotes the instance of this class in the exaples below.

@c Each node and edge has a user defined data sturcure

@c @var{N} and @var{E} statically attached to it.

@end deftp

@subsection Types

@deftp {Type} Graph::NodeType

@deftpx {Type} Graph::EdgeType

The type of the data stored statically for each node and edge.

@end deftp

@anchor{Graph-NodeIterator}

@deftp {Type} Graph::NodePoint

@deftpx {Type} Graph::NodeIterator

These types points a node uniquely. The difference between the

@code{NodePoint} and the @code{NodeIterator} is that @code{NodePoint}

requires the graph structure itself for most of the operations.

For examples using iterators you can go through all nodes as follows.

@quotation

@verbatim

Graph G;

int nodenum=0;

for(Graph::NodeIterator n(G);n.Valid();++n) ++nodenum;

@end verbatim

@end quotation

Using @code{NodePoint} the last line looks like this.

@quotation

@verbatim

for(MyGraph::NodePoint n(G);n.Valid();n=G.Next(n)) ++nodenum;

@end verbatim

@end quotation

or

@quotation

@verbatim

MyGraph::NodePoint n;

for(G.GetFirst(n);G.Valid(n);G.GoNext(n)) ++nodenum;

@end verbatim

@end quotation

@end deftp

@deftp {Type} Graph::EdgePoint

@deftpx {Type} Graph::InEdgePoint

@deftpx {Type} Graph::OutEdgePoint

@deftpx {Type} Graph::BiEdgePoint

@deftpx {Type} Graph::SymEdgePoint

Each of these types points an edge uniquely. The difference between the

@code{EdgePoint} and the

@c @mref{Graph-NodeIterator,@code{EdgeIterator}}

@mref{Graph-NodeIterator , EdgeIterator}

series is that

@code{EdgePoint} requires the graph structure itself for most of the

operations.

@end deftp

@anchor{Graph-EdgeIterator}

@deftp {Type} Graph::EdgeIterator

@deftpx {Type} Graph::InEdgeIterator

@deftpx {Type} Graph::OutEdgeIterator

@deftpx {Type} Graph::BiEdgeIterator

@deftpx {Type} Graph::SymEdgeIterator

@deftpx {Type} Graph::AllEdgeIterator

Each of these types points an edge uniquely. The difference between the

@code{EdgePoint} and the @code{EdgeIterator} series is that

@code{EdgePoint} requires the graph structure itself for most of the

operations. 

For the @code{EdgeIterator} types you can use operator @code{++}

(both the prefix and the posfix one) to obtain the next edge.

@end deftp

@deftp {Type} Graph::NodeMap

@deftpx {Type} Graph::EdgeMap

There are the default property maps for the edges and the nodes.

@end deftp

@subsection Member Functions

@subsubsection Constructors

@deftypefun { } Graph::Graph ()

The default constructor.

@end deftypefun

@deftypefun { } Graph::Graph (Graph@tie{}&)

The copy constructor. Not yet implemented.

@end deftypefun

@subsubsection Graph Maintenence Operations

@deftypefun NodeIterator Graph::AddNode ()

Adds a new node to the graph and returns a @code{NodeIterator} pointing to it.

@end deftypefun

@deftypefun EdgeIterator Graph::AddEdge (@w{const @mref{Graph-NodeIterator,NodeIterator} @var{from}}, @w{const @mref{Graph-NodeIterator,NodeIterator} @var{to}})

Adds a new edge with tail @var{from} and head @var{to} to the graph

and returns an @code{EdgeIterator} pointing to it.

@end deftypefun

@deftypefun void Graph::Delete (@w{const @mref{Graph-NodeIterator,NodeIterator} @var{n}})

Deletes the node @var{n}. It also deletes the adjacent edges.

@end deftypefun

@deftypefun void Graph::Delete (@w{const @mref{Graph-EdgeIterator,EdgeIterator} @var{e}})

Deletes the edge @var{n}.

@end deftypefun

@deftypefun void Graph::Clean ()

Deletes all edges and nodes from the graph.

@end deftypefun

@deftypefun int Graph::NodeNum ()

Returns the number of the nodes in the graph.

@end deftypefun

@subsubsection NodePoint Operations

@deftypefun NodePoint Graph::GetFirst (NodePoint &@var{n})

@deftypefunx NodePoint Graph::Next (const NodePoint @var{n})

@deftypefunx {NodePoint &} Graph::GoNext (NodePoint &@var{n})

The nodes in the graph forms a list. @code{GetFirst(n)} sets @var{n} to

be the first node. @code{Next(n)} gives back the subsequent

node. @code{Next(n)} is equivalent to @code{n=Next(n)}, though it

might be faster.  ??? What should be the return value ???

@end deftypefun

@deftypefun bool Graph::Valid (NodePoint &@var{e})

@deftypefunx bool NodePoint::Valid ()

These functions check if and NodePoint is valid or not.

??? Which one should be implemented ???

@end deftypefun

@subsubsection EdgePoint Operations

@deftypefun AllEdgePoint Graph::GetFirst (const AllEdgePoint & @var{e})

@deftypefunx AllEdgePoint Graph::Next (const AllEdgePoint @var{n})

@deftypefunx {AllEdgePoint &} Graph::GoNext (AllEdgePoint &@var{n})

With these functions you can go though all the edges of the graph.

??? What should be the return value ???

@end deftypefun

@deftypefun InEdgePoint Graph::GetFirst (const InEdgePoint & @var{e}, const NodePoint @var{n})

@deftypefunx OutEdgePoint Graph::GetFirst (const OutEdgePoint & @var{e}, const NodePoint @var{n})

@deftypefunx SymEdgePoint Graph::GetFirst (const SymEdgePoint & @var{e}, const NodePoint @var{n})

The edges leaving from, arriving at or adjacent with a node forms a

list.  These functions give back the first elements of these

lists. The exact behavior depends on the type of @var{e}.

If @var{e} is an @code{InEdgePoint} or an @code{OutEdgePoint} then

@code{GetFirst} sets @var{e} to be the first incoming or outgoing edge

of the node @var{n}, respectively.

If @var{e} is a @code{SymEdgePoint} then

@code{GetFirst} sets @var{e} to be the first incoming if there exists one

otherwise the first outgoing edge.

If there are no such edges, @var{e} will be invalid.

@end deftypefun

@deftypefun InEdgePoint Graph::Next (const InEdgePoint @var{e})

@deftypefunx OutEdgePoint Graph::Next (const OutEdgePoint @var{e})

@deftypefunx SymEdgePoint Graph::Next (const SymEdgePoint @var{e})

These functions give back the edge that follows @var{e}

@end deftypefun

@deftypefun {InEdgePoint &} Graph::GoNext (InEdgePoint &@var{e})

@deftypefunx {OutEdgePoint &} Graph::GoNext (OutEdgePoint &@var{e})

@deftypefunx {SymEdgePoint &} Graph::GoNext (SymEdgePoint &@var{e})

@code{G.GoNext(e)} is equivalent to @code{e=G.Next(e)}, though it

might be faster.

??? What should be the return value ???

@end deftypefun

@deftypefun bool Graph::Valid (EdgePoint &@var{e})

@deftypefunx bool EdgePoint::Valid ()

These functions check if and EdgePoint is valid or not.

??? Which one should be implemented ???

@end deftypefun

@deftypefun NodePoint Graph::From (const EdgePoint @var{e})

@deftypefunx NodePoint Graph::To (const EdgePoint @var{e})

@deftypefunx NodePoint Graph::ANode (const InEdgePoint @var{e})

@deftypefunx NodePoint Graph::ANode (const OutEdgePoint @var{e})

@deftypefunx NodePoint Graph::ANode (const SymEdgePoint @var{e})

@deftypefunx NodePoint Graph::BNode (const InEdgePoint @var{e})

@deftypefunx NodePoint Graph::BNode (const OutEdgePoint @var{e})

@deftypefunx NodePoint Graph::BNode (const SymEdgePoint @var{e})

There queries give back the two endpoints of the edge @var{e}.  For a

directed edge @var{e}, @code{From(e)} and @code{To(e)} is its tail and

its head, respectively. For an undirected @var{e}, they are two

endpoints, but you should not rely on which end is which.

@code{ANode(e)} is the node which @var{e} is bounded to, i.e. it is

equal to @code{From(e)} if @var{e} is an @code{OutEdgePoint} and

@code{To(e)} if @var{e} is an @code{InEdgePoint}. If @var{e} is a

@code{SymEdgePoint} and it or its first preceding edge was created by

@code{GetFirst(e,n)}, then @code{ANode(e)} is equal to @var{n}.

@code{BNode(e)} is the other end of the edge.

???It it implemented in an other way now. (Member function <-> Graph global)???

@end deftypefun

@c @deftypevar int from

@c  the tail of the created edge.

@c @end deftypevar