UndirListGraph, somebody should try it.
3 # This file describes the settings to be used by the documentation system
4 # doxygen (www.doxygen.org) for a project
6 # All text after a hash (#) is considered a comment and will be ignored
8 # TAG = value [value, ...]
9 # For lists items can also be appended using:
10 # TAG += value [value, ...]
11 # Values that contain spaces should be placed between quotes (" ")
13 #---------------------------------------------------------------------------
14 # Project related configuration options
15 #---------------------------------------------------------------------------
17 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
18 # by quotes) that should identify the project.
20 PROJECT_NAME = HugoLib
22 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
23 # This could be handy for archiving the generated documentation or
24 # if some version control system is used.
28 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
29 # base path where the generated documentation will be put.
30 # If a relative path is entered, it will be relative to the location
31 # where doxygen was started. If left blank the current directory will be used.
35 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
36 # documentation generated by doxygen is written. Doxygen will use this
37 # information to generate all constant output in the proper language.
38 # The default language is English, other supported languages are:
39 # Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch,
40 # Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en
41 # (Japanese with English messages), Korean, Korean-en, Norwegian, Polish, Portuguese,
42 # Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
44 OUTPUT_LANGUAGE = English
46 # This tag can be used to specify the encoding used in the generated output.
47 # The encoding is not always determined by the language that is chosen,
48 # but also whether or not the output is meant for Windows or non-Windows users.
49 # In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
50 # forces the Windows encoding (this is the default for the Windows binary),
51 # whereas setting the tag to NO uses a Unix-style encoding (the default for
52 # all platforms other than Windows).
54 USE_WINDOWS_ENCODING = NO
56 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
57 # include brief member descriptions after the members that are listed in
58 # the file and class documentation (similar to JavaDoc).
59 # Set to NO to disable this.
61 BRIEF_MEMBER_DESC = YES
63 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
64 # the brief description of a member or function before the detailed description.
65 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
66 # brief descriptions will be completely suppressed.
70 # This tag implements a quasi-intelligent brief description abbreviator
71 # that is used to form the text in various listings. Each string
72 # in this list, if found as the leading text of the brief description, will be
73 # stripped from the text and the result after processing the whole list, is used
74 # as the annotated text. Otherwise, the brief description is used as-is. If left
75 # blank, the following values are used ("$name" is automatically replaced with the
76 # name of the entity): "The $name class" "The $name widget" "The $name file"
77 # "is" "provides" "specifies" "contains" "represents" "a" "an" "the"
81 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
82 # Doxygen will generate a detailed section even if there is only a brief
85 ALWAYS_DETAILED_SEC = NO
87 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited
88 # members of a class in the documentation of that class as if those members were
89 # ordinary class members. Constructors, destructors and assignment operators of
90 # the base classes will not be shown.
92 INLINE_INHERITED_MEMB = NO
94 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
95 # path before files name in the file list and in the header files. If set
96 # to NO the shortest path that makes the file name unique will be used.
100 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
101 # can be used to strip a user-defined part of the path. Stripping is
102 # only done if one of the specified strings matches the left-hand part of
103 # the path. It is allowed to use relative paths in the argument list.
104 # If left blank the directory from which doxygen is run is used as the
109 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
110 # (but less readable) file names. This can be useful is your file systems
111 # doesn't support long names like on DOS, Mac, or CD-ROM.
115 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
116 # will interpret the first line (until the first dot) of a JavaDoc-style
117 # comment as the brief description. If set to NO, the JavaDoc
118 # comments will behave just like the Qt-style comments (thus requiring an
119 # explicit @brief command for a brief description.
121 JAVADOC_AUTOBRIEF = NO
123 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
124 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
125 # comments) as a brief description. This used to be the default behaviour.
126 # The new default is to treat a multi-line C++ comment block as a detailed
127 # description. Set this tag to YES if you prefer the old behaviour instead.
129 MULTILINE_CPP_IS_BRIEF = NO
131 # If the DETAILS_AT_TOP tag is set to YES then Doxygen
132 # will output the detailed description near the top, like JavaDoc.
133 # If set to NO, the detailed description appears after the member
138 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
139 # member inherits the documentation from any documented member that it
144 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
145 # tag is set to YES, then doxygen will reuse the documentation of the first
146 # member in the group (if any) for the other members of the group. By default
147 # all members of a group must be documented explicitly.
149 DISTRIBUTE_GROUP_DOC = NO
151 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
152 # Doxygen uses this value to replace tabs by spaces in code fragments.
156 # This tag can be used to specify a number of aliases that acts
157 # as commands in the documentation. An alias has the form "name=value".
158 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
159 # put the command \sideeffect (or @sideeffect) in the documentation, which
160 # will result in a user-defined paragraph with heading "Side Effects:".
161 # You can put \n's in the value part of an alias to insert newlines.
165 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
166 # only. Doxygen will then generate output that is more tailored for C.
167 # For instance, some of the names that are used will be different. The list
168 # of all members will be omitted, etc.
170 OPTIMIZE_OUTPUT_FOR_C = YES
172 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
173 # only. Doxygen will then generate output that is more tailored for Java.
174 # For instance, namespaces will be presented as packages, qualified scopes
175 # will look different, etc.
177 OPTIMIZE_OUTPUT_JAVA = NO
179 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
180 # the same type (for instance a group of public functions) to be put as a
181 # subgroup of that type (e.g. under the Public Functions section). Set it to
182 # NO to prevent subgrouping. Alternatively, this can be done per class using
183 # the \nosubgrouping command.
187 #---------------------------------------------------------------------------
188 # Build related configuration options
189 #---------------------------------------------------------------------------
191 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
192 # documentation are documented, even if no documentation was available.
193 # Private class members and static file members will be hidden unless
194 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
198 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
199 # will be included in the documentation.
203 # If the EXTRACT_STATIC tag is set to YES all static members of a file
204 # will be included in the documentation.
208 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
209 # defined locally in source files will be included in the documentation.
210 # If set to NO only classes defined in header files are included.
212 EXTRACT_LOCAL_CLASSES = YES
214 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
215 # undocumented members of documented classes, files or namespaces.
216 # If set to NO (the default) these members will be included in the
217 # various overviews, but no documentation section is generated.
218 # This option has no effect if EXTRACT_ALL is enabled.
220 HIDE_UNDOC_MEMBERS = YES
222 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
223 # undocumented classes that are normally visible in the class hierarchy.
224 # If set to NO (the default) these classes will be included in the various
225 # overviews. This option has no effect if EXTRACT_ALL is enabled.
227 HIDE_UNDOC_CLASSES = YES
229 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
230 # friend (class|struct|union) declarations.
231 # If set to NO (the default) these declarations will be included in the
234 HIDE_FRIEND_COMPOUNDS = NO
236 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
237 # documentation blocks found inside the body of a function.
238 # If set to NO (the default) these blocks will be appended to the
239 # function's detailed documentation block.
241 HIDE_IN_BODY_DOCS = NO
243 # The INTERNAL_DOCS tag determines if documentation
244 # that is typed after a \internal command is included. If the tag is set
245 # to NO (the default) then the documentation will be excluded.
246 # Set it to YES to include the internal documentation.
250 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
251 # file names in lower-case letters. If set to YES upper-case letters are also
252 # allowed. This is useful if you have classes or files whose names only differ
253 # in case and if your file system supports case sensitive file names. Windows
254 # users are advised to set this option to NO.
256 CASE_SENSE_NAMES = YES
258 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
259 # will show members with their full class and namespace scopes in the
260 # documentation. If set to YES the scope will be hidden.
262 HIDE_SCOPE_NAMES = YES
264 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
265 # will put a list of the files that are included by a file in the documentation
268 SHOW_INCLUDE_FILES = YES
270 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
271 # is inserted in the documentation for inline members.
275 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
276 # will sort the (detailed) documentation of file and class members
277 # alphabetically by member name. If set to NO the members will appear in
280 SORT_MEMBER_DOCS = NO
282 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
283 # brief documentation of file, namespace and class members alphabetically
284 # by member name. If set to NO (the default) the members will appear in
289 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
290 # sorted by fully-qualified names, including namespaces. If set to
291 # NO (the default), the class list will be sorted only by class name,
292 # not including the namespace part.
293 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
294 # Note: This option applies only to the class list, not to the
297 SORT_BY_SCOPE_NAME = NO
299 # The GENERATE_TODOLIST tag can be used to enable (YES) or
300 # disable (NO) the todo list. This list is created by putting \todo
301 # commands in the documentation.
303 GENERATE_TODOLIST = YES
305 # The GENERATE_TESTLIST tag can be used to enable (YES) or
306 # disable (NO) the test list. This list is created by putting \test
307 # commands in the documentation.
309 GENERATE_TESTLIST = YES
311 # The GENERATE_BUGLIST tag can be used to enable (YES) or
312 # disable (NO) the bug list. This list is created by putting \bug
313 # commands in the documentation.
315 GENERATE_BUGLIST = YES
317 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
318 # disable (NO) the deprecated list. This list is created by putting
319 # \deprecated commands in the documentation.
321 GENERATE_DEPRECATEDLIST= YES
323 # The ENABLED_SECTIONS tag can be used to enable conditional
324 # documentation sections, marked by \if sectionname ... \endif.
328 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
329 # the initial value of a variable or define consists of for it to appear in
330 # the documentation. If the initializer consists of more lines than specified
331 # here it will be hidden. Use a value of 0 to hide initializers completely.
332 # The appearance of the initializer of individual variables and defines in the
333 # documentation can be controlled using \showinitializer or \hideinitializer
334 # command in the documentation regardless of this setting.
336 MAX_INITIALIZER_LINES = 30
338 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
339 # at the bottom of the documentation of classes and structs. If set to YES the
340 # list will mention the files that were used to generate the documentation.
342 SHOW_USED_FILES = YES
344 #---------------------------------------------------------------------------
345 # configuration options related to warning and progress messages
346 #---------------------------------------------------------------------------
348 # The QUIET tag can be used to turn on/off the messages that are generated
349 # by doxygen. Possible values are YES and NO. If left blank NO is used.
353 # The WARNINGS tag can be used to turn on/off the warning messages that are
354 # generated by doxygen. Possible values are YES and NO. If left blank
359 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
360 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
361 # automatically be disabled.
363 WARN_IF_UNDOCUMENTED = YES
365 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
366 # potential errors in the documentation, such as not documenting some
367 # parameters in a documented function, or documenting parameters that
368 # don't exist or using markup commands wrongly.
370 WARN_IF_DOC_ERROR = YES
372 # The WARN_FORMAT tag determines the format of the warning messages that
373 # doxygen can produce. The string should contain the $file, $line, and $text
374 # tags, which will be replaced by the file and line number from which the
375 # warning originated and the warning text.
377 WARN_FORMAT = "$file:$line: $text"
379 # The WARN_LOGFILE tag can be used to specify a file to which warning
380 # and error messages should be written. If left blank the output is written
385 #---------------------------------------------------------------------------
386 # configuration options related to the input files
387 #---------------------------------------------------------------------------
389 # The INPUT tag can be used to specify the files and/or directories that contain
390 # documented source files. You may enter file names like "myfile.cpp" or
391 # directories like "/usr/src/myproject". Separate the files or directories
394 INPUT = ../src/include/skeletons/graph.h \
395 ../src/include/invalid.h \
396 ../src/include/smart_graph.h \
397 ../src/include/skeletons/maps.h \
398 ../src/include/dijkstra.h \
399 ../src/include/bin_heap.h \
400 ../src/include/fib_heap.h \
401 ../src/work/athos/xy/xy.h \
402 ../src/work/athos/minlengthpaths.h \
403 ../src/work/marci/time_measure.h \
404 ../src/work/marci/graph_wrapper.h \
407 # If the value of the INPUT tag contains directories, you can use the
408 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
409 # and *.h) to filter out the source-files in the directories. If left
410 # blank the following patterns are tested:
411 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp
412 # *.h++ *.idl *.odl *.cs *.php *.php3 *.inc
416 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
417 # should be searched for input files as well. Possible values are YES and NO.
418 # If left blank NO is used.
422 # The EXCLUDE tag can be used to specify files and/or directories that should
423 # excluded from the INPUT source files. This way you can easily exclude a
424 # subdirectory from a directory tree whose root is specified with the INPUT tag.
428 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories
429 # that are symbolic links (a Unix filesystem feature) are excluded from the input.
431 EXCLUDE_SYMLINKS = NO
433 # If the value of the INPUT tag contains directories, you can use the
434 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
435 # certain files from those directories.
439 # The EXAMPLE_PATH tag can be used to specify one or more files or
440 # directories that contain example code fragments that are included (see
441 # the \include command).
443 EXAMPLE_PATH = examples
445 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
446 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
447 # and *.h) to filter out the source-files in the directories. If left
448 # blank all files are included.
452 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
453 # searched for input files to be used with the \include or \dontinclude
454 # commands irrespective of the value of the RECURSIVE tag.
455 # Possible values are YES and NO. If left blank NO is used.
457 EXAMPLE_RECURSIVE = NO
459 # The IMAGE_PATH tag can be used to specify one or more files or
460 # directories that contain image that are included in the documentation (see
461 # the \image command).
465 # The INPUT_FILTER tag can be used to specify a program that doxygen should
466 # invoke to filter for each input file. Doxygen will invoke the filter program
467 # by executing (via popen()) the command <filter> <input-file>, where <filter>
468 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
469 # input file. Doxygen will then use the output that the filter program writes
470 # to standard output.
474 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
475 # INPUT_FILTER) will be used to filter the input files when producing source
476 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
478 FILTER_SOURCE_FILES = NO
480 #---------------------------------------------------------------------------
481 # configuration options related to source browsing
482 #---------------------------------------------------------------------------
484 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
485 # be generated. Documented entities will be cross-referenced with these sources.
486 # Note: To get rid of all source code in the generated output, make sure also
487 # VERBATIM_HEADERS is set to NO.
491 # Setting the INLINE_SOURCES tag to YES will include the body
492 # of functions and classes directly in the documentation.
496 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
497 # doxygen to hide any special comment blocks from generated source code
498 # fragments. Normal C and C++ comments will always remain visible.
500 STRIP_CODE_COMMENTS = YES
502 # If the REFERENCED_BY_RELATION tag is set to YES (the default)
503 # then for each documented function all documented
504 # functions referencing it will be listed.
506 REFERENCED_BY_RELATION = YES
508 # If the REFERENCES_RELATION tag is set to YES (the default)
509 # then for each documented function all documented entities
510 # called/used by that function will be listed.
512 REFERENCES_RELATION = YES
514 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
515 # will generate a verbatim copy of the header file for each class for
516 # which an include is specified. Set to NO to disable this.
518 VERBATIM_HEADERS = YES
520 #---------------------------------------------------------------------------
521 # configuration options related to the alphabetical class index
522 #---------------------------------------------------------------------------
524 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
525 # of all compounds will be generated. Enable this if the project
526 # contains a lot of classes, structs, unions or interfaces.
528 ALPHABETICAL_INDEX = YES
530 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
531 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
532 # in which this list will be split (can be a number in the range [1..20])
534 COLS_IN_ALPHA_INDEX = 2
536 # In case all classes in a project start with a common prefix, all
537 # classes will be put under the same header in the alphabetical index.
538 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
539 # should be ignored while generating the index headers.
543 #---------------------------------------------------------------------------
544 # configuration options related to the HTML output
545 #---------------------------------------------------------------------------
547 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
548 # generate HTML output.
552 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
553 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
554 # put in front of it. If left blank `html' will be used as the default path.
558 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
559 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
560 # doxygen will generate files with .html extension.
562 HTML_FILE_EXTENSION = .html
564 # The HTML_HEADER tag can be used to specify a personal HTML header for
565 # each generated HTML page. If it is left blank doxygen will generate a
570 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
571 # each generated HTML page. If it is left blank doxygen will generate a
576 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
577 # style sheet that is used by each HTML page. It can be used to
578 # fine-tune the look of the HTML output. If the tag is left blank doxygen
579 # will generate a default style sheet. Note that doxygen will try to copy
580 # the style sheet file to the HTML output directory, so don't put your own
581 # stylesheet in the HTML output directory as well, or it will be erased!
585 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
586 # files or namespaces will be aligned in HTML using tables. If set to
587 # NO a bullet list will be used.
589 HTML_ALIGN_MEMBERS = YES
591 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
592 # will be generated that can be used as input for tools like the
593 # Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
594 # of the generated HTML documentation.
596 GENERATE_HTMLHELP = NO
598 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
599 # be used to specify the file name of the resulting .chm file. You
600 # can add a path in front of the file if the result should not be
601 # written to the html output directory.
605 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
606 # be used to specify the location (absolute path including file name) of
607 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
608 # the HTML help compiler on the generated index.hhp.
612 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
613 # controls if a separate .chi index file is generated (YES) or that
614 # it should be included in the master .chm file (NO).
618 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
619 # controls whether a binary table of contents is generated (YES) or a
620 # normal table of contents (NO) in the .chm file.
624 # The TOC_EXPAND flag can be set to YES to add extra items for group members
625 # to the contents of the HTML help documentation and to the tree view.
629 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
630 # top of each HTML page. The value NO (the default) enables the index and
631 # the value YES disables it.
635 # This tag can be used to set the number of enum values (range [1..20])
636 # that doxygen will group on one line in the generated HTML documentation.
638 ENUM_VALUES_PER_LINE = 4
640 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
641 # generated containing a tree-like index structure (just like the one that
642 # is generated for HTML Help). For this to work a browser that supports
643 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
644 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
645 # probably better off using the HTML help feature.
647 GENERATE_TREEVIEW = YES
649 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
650 # used to set the initial width (in pixels) of the frame in which the tree
655 #---------------------------------------------------------------------------
656 # configuration options related to the LaTeX output
657 #---------------------------------------------------------------------------
659 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
660 # generate Latex output.
664 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
665 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
666 # put in front of it. If left blank `latex' will be used as the default path.
670 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
671 # invoked. If left blank `latex' will be used as the default command name.
673 LATEX_CMD_NAME = latex
675 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
676 # generate index for LaTeX. If left blank `makeindex' will be used as the
677 # default command name.
679 MAKEINDEX_CMD_NAME = makeindex
681 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
682 # LaTeX documents. This may be useful for small projects and may help to
683 # save some trees in general.
687 # The PAPER_TYPE tag can be used to set the paper type that is used
688 # by the printer. Possible values are: a4, a4wide, letter, legal and
689 # executive. If left blank a4wide will be used.
693 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
694 # packages that should be included in the LaTeX output.
698 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
699 # the generated latex document. The header should contain everything until
700 # the first chapter. If it is left blank doxygen will generate a
701 # standard header. Notice: only use this tag if you know what you are doing!
705 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
706 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
707 # contain links (just like the HTML output) instead of page references
708 # This makes the output suitable for online browsing using a pdf viewer.
712 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
713 # plain latex in the generated Makefile. Set this option to YES to get a
714 # higher quality PDF documentation.
718 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
719 # command to the generated LaTeX files. This will instruct LaTeX to keep
720 # running if errors occur, instead of asking the user for help.
721 # This option is also used when generating formulas in HTML.
725 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
726 # include the index chapters (such as File Index, Compound Index, etc.)
729 LATEX_HIDE_INDICES = NO
731 #---------------------------------------------------------------------------
732 # configuration options related to the RTF output
733 #---------------------------------------------------------------------------
735 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
736 # The RTF output is optimized for Word 97 and may not look very pretty with
737 # other RTF readers or editors.
741 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
742 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
743 # put in front of it. If left blank `rtf' will be used as the default path.
747 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
748 # RTF documents. This may be useful for small projects and may help to
749 # save some trees in general.
753 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
754 # will contain hyperlink fields. The RTF file will
755 # contain links (just like the HTML output) instead of page references.
756 # This makes the output suitable for online browsing using WORD or other
757 # programs which support those fields.
758 # Note: wordpad (write) and others do not support links.
762 # Load stylesheet definitions from file. Syntax is similar to doxygen's
763 # config file, i.e. a series of assignments. You only have to provide
764 # replacements, missing definitions are set to their default value.
766 RTF_STYLESHEET_FILE =
768 # Set optional variables used in the generation of an rtf document.
769 # Syntax is similar to doxygen's config file.
771 RTF_EXTENSIONS_FILE =
773 #---------------------------------------------------------------------------
774 # configuration options related to the man page output
775 #---------------------------------------------------------------------------
777 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
782 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
783 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
784 # put in front of it. If left blank `man' will be used as the default path.
788 # The MAN_EXTENSION tag determines the extension that is added to
789 # the generated man pages (default is the subroutine's section .3)
793 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
794 # then it will generate one additional man file for each entity
795 # documented in the real man page(s). These additional files
796 # only source the real man page, but without them the man command
797 # would be unable to find the correct page. The default is NO.
801 #---------------------------------------------------------------------------
802 # configuration options related to the XML output
803 #---------------------------------------------------------------------------
805 # If the GENERATE_XML tag is set to YES Doxygen will
806 # generate an XML file that captures the structure of
807 # the code including all documentation.
811 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
812 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
813 # put in front of it. If left blank `xml' will be used as the default path.
817 # The XML_SCHEMA tag can be used to specify an XML schema,
818 # which can be used by a validating XML parser to check the
819 # syntax of the XML files.
823 # The XML_DTD tag can be used to specify an XML DTD,
824 # which can be used by a validating XML parser to check the
825 # syntax of the XML files.
829 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
830 # dump the program listings (including syntax highlighting
831 # and cross-referencing information) to the XML output. Note that
832 # enabling this will significantly increase the size of the XML output.
834 XML_PROGRAMLISTING = YES
836 #---------------------------------------------------------------------------
837 # configuration options for the AutoGen Definitions output
838 #---------------------------------------------------------------------------
840 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
841 # generate an AutoGen Definitions (see autogen.sf.net) file
842 # that captures the structure of the code including all
843 # documentation. Note that this feature is still experimental
844 # and incomplete at the moment.
846 GENERATE_AUTOGEN_DEF = NO
848 #---------------------------------------------------------------------------
849 # configuration options related to the Perl module output
850 #---------------------------------------------------------------------------
852 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
853 # generate a Perl module file that captures the structure of
854 # the code including all documentation. Note that this
855 # feature is still experimental and incomplete at the
858 GENERATE_PERLMOD = NO
860 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
861 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
862 # to generate PDF and DVI output from the Perl module output.
866 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
867 # nicely formatted so it can be parsed by a human reader. This is useful
868 # if you want to understand what is going on. On the other hand, if this
869 # tag is set to NO the size of the Perl module output will be much smaller
870 # and Perl will parse it just the same.
874 # The names of the make variables in the generated doxyrules.make file
875 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
876 # This is useful so different doxyrules.make files included by the same
877 # Makefile don't overwrite each other's variables.
879 PERLMOD_MAKEVAR_PREFIX =
881 #---------------------------------------------------------------------------
882 # Configuration options related to the preprocessor
883 #---------------------------------------------------------------------------
885 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
886 # evaluate all C-preprocessor directives found in the sources and include
889 ENABLE_PREPROCESSING = YES
891 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
892 # names in the source code. If set to NO (the default) only conditional
893 # compilation will be performed. Macro expansion can be done in a controlled
894 # way by setting EXPAND_ONLY_PREDEF to YES.
898 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
899 # then the macro expansion is limited to the macros specified with the
900 # PREDEFINED and EXPAND_AS_PREDEFINED tags.
902 EXPAND_ONLY_PREDEF = NO
904 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
905 # in the INCLUDE_PATH (see below) will be search if a #include is found.
907 SEARCH_INCLUDES = YES
909 # The INCLUDE_PATH tag can be used to specify one or more directories that
910 # contain include files that are not input files but should be processed by
915 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
916 # patterns (like *.h and *.hpp) to filter out the header-files in the
917 # directories. If left blank, the patterns specified with FILE_PATTERNS will
920 INCLUDE_FILE_PATTERNS =
922 # The PREDEFINED tag can be used to specify one or more macro names that
923 # are defined before the preprocessor is started (similar to the -D option of
924 # gcc). The argument of the tag is a list of macros of the form: name
925 # or name=definition (no spaces). If the definition and the = are
926 # omitted =1 is assumed.
930 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
931 # this tag can be used to specify a list of macro names that should be expanded.
932 # The macro definition that is found in the sources will be used.
933 # Use the PREDEFINED tag if you want to use a different macro definition.
937 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
938 # doxygen's preprocessor will remove all function-like macros that are alone
939 # on a line, have an all uppercase name, and do not end with a semicolon. Such
940 # function macros are typically used for boiler-plate code, and will confuse the
941 # parser if not removed.
943 SKIP_FUNCTION_MACROS = YES
945 #---------------------------------------------------------------------------
946 # Configuration::additions related to external references
947 #---------------------------------------------------------------------------
949 # The TAGFILES option can be used to specify one or more tagfiles.
950 # Optionally an initial location of the external documentation
951 # can be added for each tagfile. The format of a tag file without
952 # this location is as follows:
953 # TAGFILES = file1 file2 ...
954 # Adding location for the tag files is done as follows:
955 # TAGFILES = file1=loc1 "file2 = loc2" ...
956 # where "loc1" and "loc2" can be relative or absolute paths or
957 # URLs. If a location is present for each tag, the installdox tool
958 # does not have to be run to correct the links.
959 # Note that each tag file must have a unique name
960 # (where the name does NOT include the path)
961 # If a tag file is not located in the directory in which doxygen
962 # is run, you must also specify the path to the tagfile here.
966 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
967 # a tag file that is based on the input files it reads.
971 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
972 # in the class index. If set to NO only the inherited external classes
977 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
978 # in the modules index. If set to NO, only the current project's groups will
981 EXTERNAL_GROUPS = YES
983 # The PERL_PATH should be the absolute path and name of the perl script
984 # interpreter (i.e. the result of `which perl').
986 PERL_PATH = /usr/bin/perl
988 #---------------------------------------------------------------------------
989 # Configuration options related to the dot tool
990 #---------------------------------------------------------------------------
992 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
993 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or
994 # super classes. Setting the tag to NO turns the diagrams off. Note that this
995 # option is superseded by the HAVE_DOT option below. This is only a fallback. It is
996 # recommended to install and use dot, since it yields more powerful graphs.
1000 # If set to YES, the inheritance and collaboration graphs will hide
1001 # inheritance and usage relations if the target is undocumented
1002 # or is not a class.
1004 HIDE_UNDOC_RELATIONS = NO
1006 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1007 # available from the path. This tool is part of Graphviz, a graph visualization
1008 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
1009 # have no effect if this option is set to NO (the default)
1013 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1014 # will generate a graph for each documented class showing the direct and
1015 # indirect inheritance relations. Setting this tag to YES will force the
1016 # the CLASS_DIAGRAMS tag to NO.
1020 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1021 # will generate a graph for each documented class showing the direct and
1022 # indirect implementation dependencies (inheritance, containment, and
1023 # class references variables) of the class with other documented classes.
1025 COLLABORATION_GRAPH = YES
1027 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1028 # collaboration diagrams in a style similar to the OMG's Unified Modeling
1033 # If set to YES, the inheritance and collaboration graphs will show the
1034 # relations between templates and their instances.
1036 TEMPLATE_RELATIONS = YES
1038 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1039 # tags are set to YES then doxygen will generate a graph for each documented
1040 # file showing the direct and indirect include dependencies of the file with
1041 # other documented files.
1045 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1046 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1047 # documented header file showing the documented files that directly or
1048 # indirectly include this file.
1050 INCLUDED_BY_GRAPH = YES
1052 # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
1053 # generate a call dependency graph for every global function or class method.
1054 # Note that enabling this option will significantly increase the time of a run.
1055 # So in most cases it will be better to enable call graphs for selected
1056 # functions only using the \callgraph command.
1060 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1061 # will graphical hierarchy of all classes instead of a textual one.
1063 GRAPHICAL_HIERARCHY = YES
1065 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1066 # generated by dot. Possible values are png, jpg, or gif
1067 # If left blank png will be used.
1069 DOT_IMAGE_FORMAT = png
1071 # The tag DOT_PATH can be used to specify the path where the dot tool can be
1072 # found. If left blank, it is assumed the dot tool can be found on the path.
1076 # The DOTFILE_DIRS tag can be used to specify one or more directories that
1077 # contain dot files that are included in the documentation (see the
1078 # \dotfile command).
1082 # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
1083 # (in pixels) of the graphs generated by dot. If a graph becomes larger than
1084 # this value, doxygen will try to truncate the graph, so that it fits within
1085 # the specified constraint. Beware that most browsers cannot cope with very
1088 MAX_DOT_GRAPH_WIDTH = 1024
1090 # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
1091 # (in pixels) of the graphs generated by dot. If a graph becomes larger than
1092 # this value, doxygen will try to truncate the graph, so that it fits within
1093 # the specified constraint. Beware that most browsers cannot cope with very
1096 MAX_DOT_GRAPH_HEIGHT = 1024
1098 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1099 # graphs generated by dot. A depth value of 3 means that only nodes reachable
1100 # from the root by following a path via at most 3 edges will be shown. Nodes that
1101 # lay further from the root node will be omitted. Note that setting this option to
1102 # 1 or 2 may greatly reduce the computation time needed for large code bases. Also
1103 # note that a graph may be further truncated if the graph's image dimensions are
1104 # not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT).
1105 # If 0 is used for the depth value (the default), the graph is not depth-constrained.
1107 MAX_DOT_GRAPH_DEPTH = 0
1109 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1110 # generate a legend page explaining the meaning of the various boxes and
1111 # arrows in the dot generated graphs.
1113 GENERATE_LEGEND = YES
1115 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1116 # remove the intermediate dot files that are used to generate
1117 # the various graphs.
1121 #---------------------------------------------------------------------------
1122 # Configuration::additions related to the search engine
1123 #---------------------------------------------------------------------------
1125 # The SEARCHENGINE tag specifies whether or not a search engine should be
1126 # used. If set to NO the values of all tags below this one will be ignored.