doc/Doxyfile.in
author deba
Tue, 05 Apr 2005 12:30:46 +0000
changeset 1307 d4acebef7276
child 1308 0274efa2222f
permissions -rw-r--r--
Stuffs moved into bits
     1 # Doxyfile 1.4.2
     2 
     3 # This file describes the settings to be used by the documentation system
     4 # doxygen (www.doxygen.org) for a project
     5 #
     6 # All text after a hash (#) is considered a comment and will be ignored
     7 # The format is:
     8 #       TAG = value [value, ...]
     9 # For lists items can also be appended using:
    10 #       TAG += value [value, ...]
    11 # Values that contain spaces should be placed between quotes (" ")
    12 
    13 #---------------------------------------------------------------------------
    14 # Project related configuration options
    15 #---------------------------------------------------------------------------
    16 
    17 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
    18 # by quotes) that should identify the project.
    19 
    20 PROJECT_NAME           = @PACKAGE_NAME@
    21 
    22 # The PROJECT_NUMBER tag can be used to enter a project or revision number. 
    23 # This could be handy for archiving the generated documentation or 
    24 # if some version control system is used.
    25 
    26 PROJECT_NUMBER         = @PACKAGE_VERSION@
    27 
    28 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
    29 # base path where the generated documentation will be put. 
    30 # If a relative path is entered, it will be relative to the location 
    31 # where doxygen was started. If left blank the current directory will be used.
    32 
    33 OUTPUT_DIRECTORY       = 
    34 
    35 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
    36 # 4096 sub-directories (in 2 levels) under the output directory of each output 
    37 # format and will distribute the generated files over these directories. 
    38 # Enabling this option can be useful when feeding doxygen a huge amount of 
    39 # source files, where putting all generated files in the same directory would 
    40 # otherwise cause performance problems for the file system.
    41 
    42 CREATE_SUBDIRS         = NO
    43 
    44 # The OUTPUT_LANGUAGE tag is used to specify the language in which all 
    45 # documentation generated by doxygen is written. Doxygen will use this 
    46 # information to generate all constant output in the proper language. 
    47 # The default language is English, other supported languages are: 
    48 # Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, 
    49 # Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, 
    50 # Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, 
    51 # Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, 
    52 # Swedish, and Ukrainian.
    53 
    54 OUTPUT_LANGUAGE        = English
    55 
    56 # This tag can be used to specify the encoding used in the generated output. 
    57 # The encoding is not always determined by the language that is chosen, 
    58 # but also whether or not the output is meant for Windows or non-Windows users. 
    59 # In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES 
    60 # forces the Windows encoding (this is the default for the Windows binary), 
    61 # whereas setting the tag to NO uses a Unix-style encoding (the default for 
    62 # all platforms other than Windows).
    63 
    64 USE_WINDOWS_ENCODING   = NO
    65 
    66 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
    67 # include brief member descriptions after the members that are listed in 
    68 # the file and class documentation (similar to JavaDoc). 
    69 # Set to NO to disable this.
    70 
    71 BRIEF_MEMBER_DESC      = YES
    72 
    73 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
    74 # the brief description of a member or function before the detailed description. 
    75 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
    76 # brief descriptions will be completely suppressed.
    77 
    78 REPEAT_BRIEF           = NO
    79 
    80 # This tag implements a quasi-intelligent brief description abbreviator 
    81 # that is used to form the text in various listings. Each string 
    82 # in this list, if found as the leading text of the brief description, will be 
    83 # stripped from the text and the result after processing the whole list, is 
    84 # used as the annotated text. Otherwise, the brief description is used as-is. 
    85 # If left blank, the following values are used ("$name" is automatically 
    86 # replaced with the name of the entity): "The $name class" "The $name widget" 
    87 # "The $name file" "is" "provides" "specifies" "contains" 
    88 # "represents" "a" "an" "the"
    89 
    90 ABBREVIATE_BRIEF       = 
    91 
    92 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
    93 # Doxygen will generate a detailed section even if there is only a brief 
    94 # description.
    95 
    96 ALWAYS_DETAILED_SEC    = NO
    97 
    98 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all 
    99 # inherited members of a class in the documentation of that class as if those 
   100 # members were ordinary class members. Constructors, destructors and assignment 
   101 # operators of the base classes will not be shown.
   102 
   103 INLINE_INHERITED_MEMB  = NO
   104 
   105 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
   106 # path before files name in the file list and in the header files. If set 
   107 # to NO the shortest path that makes the file name unique will be used.
   108 
   109 FULL_PATH_NAMES        = YES
   110 
   111 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
   112 # can be used to strip a user-defined part of the path. Stripping is 
   113 # only done if one of the specified strings matches the left-hand part of 
   114 # the path. The tag can be used to show relative paths in the file list. 
   115 # If left blank the directory from which doxygen is run is used as the 
   116 # path to strip.
   117 
   118 STRIP_FROM_PATH        = ../src
   119 
   120 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
   121 # the path mentioned in the documentation of a class, which tells 
   122 # the reader which header file to include in order to use a class. 
   123 # If left blank only the name of the header file containing the class 
   124 # definition is used. Otherwise one should specify the include paths that 
   125 # are normally passed to the compiler using the -I flag.
   126 
   127 STRIP_FROM_INC_PATH    = ../src
   128 
   129 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
   130 # (but less readable) file names. This can be useful is your file systems 
   131 # doesn't support long names like on DOS, Mac, or CD-ROM.
   132 
   133 SHORT_NAMES            = NO
   134 
   135 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
   136 # will interpret the first line (until the first dot) of a JavaDoc-style 
   137 # comment as the brief description. If set to NO, the JavaDoc 
   138 # comments will behave just like the Qt-style comments (thus requiring an 
   139 # explicit @brief command for a brief description.
   140 
   141 JAVADOC_AUTOBRIEF      = NO
   142 
   143 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
   144 # treat a multi-line C++ special comment block (i.e. a block of //! or /// 
   145 # comments) as a brief description. This used to be the default behaviour. 
   146 # The new default is to treat a multi-line C++ comment block as a detailed 
   147 # description. Set this tag to YES if you prefer the old behaviour instead.
   148 
   149 MULTILINE_CPP_IS_BRIEF = NO
   150 
   151 # If the DETAILS_AT_TOP tag is set to YES then Doxygen 
   152 # will output the detailed description near the top, like JavaDoc.
   153 # If set to NO, the detailed description appears after the member 
   154 # documentation.
   155 
   156 DETAILS_AT_TOP         = YES
   157 
   158 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
   159 # member inherits the documentation from any documented member that it 
   160 # re-implements.
   161 
   162 INHERIT_DOCS           = NO
   163 
   164 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
   165 # tag is set to YES, then doxygen will reuse the documentation of the first 
   166 # member in the group (if any) for the other members of the group. By default 
   167 # all members of a group must be documented explicitly.
   168 
   169 DISTRIBUTE_GROUP_DOC   = NO
   170 
   171 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce 
   172 # a new page for each member. If set to NO, the documentation of a member will 
   173 # be part of the file/class/namespace that contains it.
   174 
   175 SEPARATE_MEMBER_PAGES  = NO
   176 
   177 # The TAB_SIZE tag can be used to set the number of spaces in a tab. 
   178 # Doxygen uses this value to replace tabs by spaces in code fragments.
   179 
   180 TAB_SIZE               = 8
   181 
   182 # This tag can be used to specify a number of aliases that acts 
   183 # as commands in the documentation. An alias has the form "name=value". 
   184 # For example adding "sideeffect=\par Side Effects:\n" will allow you to 
   185 # put the command \sideeffect (or @sideeffect) in the documentation, which 
   186 # will result in a user-defined paragraph with heading "Side Effects:". 
   187 # You can put \n's in the value part of an alias to insert newlines.
   188 
   189 ALIASES                = 
   190 
   191 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 
   192 # sources only. Doxygen will then generate output that is more tailored for C. 
   193 # For instance, some of the names that are used will be different. The list 
   194 # of all members will be omitted, etc.
   195 
   196 OPTIMIZE_OUTPUT_FOR_C  = NO
   197 
   198 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources 
   199 # only. Doxygen will then generate output that is more tailored for Java. 
   200 # For instance, namespaces will be presented as packages, qualified scopes 
   201 # will look different, etc.
   202 
   203 OPTIMIZE_OUTPUT_JAVA   = NO
   204 
   205 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
   206 # the same type (for instance a group of public functions) to be put as a 
   207 # subgroup of that type (e.g. under the Public Functions section). Set it to 
   208 # NO to prevent subgrouping. Alternatively, this can be done per class using 
   209 # the \nosubgrouping command.
   210 
   211 SUBGROUPING            = YES
   212 
   213 #---------------------------------------------------------------------------
   214 # Build related configuration options
   215 #---------------------------------------------------------------------------
   216 
   217 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
   218 # documentation are documented, even if no documentation was available. 
   219 # Private class members and static file members will be hidden unless 
   220 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
   221 
   222 EXTRACT_ALL            = NO
   223 
   224 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
   225 # will be included in the documentation.
   226 
   227 EXTRACT_PRIVATE        = NO
   228 
   229 # If the EXTRACT_STATIC tag is set to YES all static members of a file 
   230 # will be included in the documentation.
   231 
   232 EXTRACT_STATIC         = NO
   233 
   234 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
   235 # defined locally in source files will be included in the documentation. 
   236 # If set to NO only classes defined in header files are included.
   237 
   238 EXTRACT_LOCAL_CLASSES  = YES
   239 
   240 # This flag is only useful for Objective-C code. When set to YES local 
   241 # methods, which are defined in the implementation section but not in 
   242 # the interface are included in the documentation. 
   243 # If set to NO (the default) only methods in the interface are included.
   244 
   245 EXTRACT_LOCAL_METHODS  = NO
   246 
   247 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
   248 # undocumented members of documented classes, files or namespaces. 
   249 # If set to NO (the default) these members will be included in the 
   250 # various overviews, but no documentation section is generated. 
   251 # This option has no effect if EXTRACT_ALL is enabled.
   252 
   253 HIDE_UNDOC_MEMBERS     = YES
   254 
   255 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
   256 # undocumented classes that are normally visible in the class hierarchy. 
   257 # If set to NO (the default) these classes will be included in the various 
   258 # overviews. This option has no effect if EXTRACT_ALL is enabled.
   259 
   260 HIDE_UNDOC_CLASSES     = YES
   261 
   262 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
   263 # friend (class|struct|union) declarations. 
   264 # If set to NO (the default) these declarations will be included in the 
   265 # documentation.
   266 
   267 HIDE_FRIEND_COMPOUNDS  = NO
   268 
   269 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
   270 # documentation blocks found inside the body of a function. 
   271 # If set to NO (the default) these blocks will be appended to the 
   272 # function's detailed documentation block.
   273 
   274 HIDE_IN_BODY_DOCS      = NO
   275 
   276 # The INTERNAL_DOCS tag determines if documentation 
   277 # that is typed after a \internal command is included. If the tag is set 
   278 # to NO (the default) then the documentation will be excluded. 
   279 # Set it to YES to include the internal documentation.
   280 
   281 INTERNAL_DOCS          = NO
   282 
   283 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
   284 # file names in lower-case letters. If set to YES upper-case letters are also 
   285 # allowed. This is useful if you have classes or files whose names only differ 
   286 # in case and if your file system supports case sensitive file names. Windows 
   287 # and Mac users are advised to set this option to NO.
   288 
   289 CASE_SENSE_NAMES       = YES
   290 
   291 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
   292 # will show members with their full class and namespace scopes in the 
   293 # documentation. If set to YES the scope will be hidden.
   294 
   295 HIDE_SCOPE_NAMES       = YES
   296 
   297 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
   298 # will put a list of the files that are included by a file in the documentation 
   299 # of that file.
   300 
   301 SHOW_INCLUDE_FILES     = YES
   302 
   303 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
   304 # is inserted in the documentation for inline members.
   305 
   306 INLINE_INFO            = YES
   307 
   308 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
   309 # will sort the (detailed) documentation of file and class members 
   310 # alphabetically by member name. If set to NO the members will appear in 
   311 # declaration order.
   312 
   313 SORT_MEMBER_DOCS       = NO
   314 
   315 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
   316 # brief documentation of file, namespace and class members alphabetically 
   317 # by member name. If set to NO (the default) the members will appear in 
   318 # declaration order.
   319 
   320 SORT_BRIEF_DOCS        = NO
   321 
   322 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
   323 # sorted by fully-qualified names, including namespaces. If set to 
   324 # NO (the default), the class list will be sorted only by class name, 
   325 # not including the namespace part. 
   326 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
   327 # Note: This option applies only to the class list, not to the 
   328 # alphabetical list.
   329 
   330 SORT_BY_SCOPE_NAME     = NO
   331 
   332 # The GENERATE_TODOLIST tag can be used to enable (YES) or 
   333 # disable (NO) the todo list. This list is created by putting \todo 
   334 # commands in the documentation.
   335 
   336 GENERATE_TODOLIST      = YES
   337 
   338 # The GENERATE_TESTLIST tag can be used to enable (YES) or 
   339 # disable (NO) the test list. This list is created by putting \test 
   340 # commands in the documentation.
   341 
   342 GENERATE_TESTLIST      = YES
   343 
   344 # The GENERATE_BUGLIST tag can be used to enable (YES) or 
   345 # disable (NO) the bug list. This list is created by putting \bug 
   346 # commands in the documentation.
   347 
   348 GENERATE_BUGLIST       = YES
   349 
   350 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
   351 # disable (NO) the deprecated list. This list is created by putting 
   352 # \deprecated commands in the documentation.
   353 
   354 GENERATE_DEPRECATEDLIST= YES
   355 
   356 # The ENABLED_SECTIONS tag can be used to enable conditional 
   357 # documentation sections, marked by \if sectionname ... \endif.
   358 
   359 ENABLED_SECTIONS       = 
   360 
   361 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
   362 # the initial value of a variable or define consists of for it to appear in 
   363 # the documentation. If the initializer consists of more lines than specified 
   364 # here it will be hidden. Use a value of 0 to hide initializers completely. 
   365 # The appearance of the initializer of individual variables and defines in the 
   366 # documentation can be controlled using \showinitializer or \hideinitializer 
   367 # command in the documentation regardless of this setting.
   368 
   369 MAX_INITIALIZER_LINES  = 5
   370 
   371 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
   372 # at the bottom of the documentation of classes and structs. If set to YES the 
   373 # list will mention the files that were used to generate the documentation.
   374 
   375 SHOW_USED_FILES        = YES
   376 
   377 # If the sources in your project are distributed over multiple directories 
   378 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 
   379 # in the documentation.
   380 
   381 SHOW_DIRECTORIES       = YES
   382 
   383 # The FILE_VERSION_FILTER tag can be used to specify a program or script that 
   384 # doxygen should invoke to get the current version for each file (typically from the 
   385 # version control system). Doxygen will invoke the program by executing (via 
   386 # popen()) the command <command> <input-file>, where <command> is the value of 
   387 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 
   388 # provided by doxygen. Whatever the progam writes to standard output 
   389 # is used as the file version. See the manual for examples.
   390 
   391 FILE_VERSION_FILTER    = 
   392 
   393 #---------------------------------------------------------------------------
   394 # configuration options related to warning and progress messages
   395 #---------------------------------------------------------------------------
   396 
   397 # The QUIET tag can be used to turn on/off the messages that are generated 
   398 # by doxygen. Possible values are YES and NO. If left blank NO is used.
   399 
   400 QUIET                  = NO
   401 
   402 # The WARNINGS tag can be used to turn on/off the warning messages that are 
   403 # generated by doxygen. Possible values are YES and NO. If left blank 
   404 # NO is used.
   405 
   406 WARNINGS               = YES
   407 
   408 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
   409 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
   410 # automatically be disabled.
   411 
   412 WARN_IF_UNDOCUMENTED   = YES
   413 
   414 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
   415 # potential errors in the documentation, such as not documenting some 
   416 # parameters in a documented function, or documenting parameters that 
   417 # don't exist or using markup commands wrongly.
   418 
   419 WARN_IF_DOC_ERROR      = YES
   420 
   421 # This WARN_NO_PARAMDOC option can be abled to get warnings for 
   422 # functions that are documented, but have no documentation for their parameters 
   423 # or return value. If set to NO (the default) doxygen will only warn about 
   424 # wrong or incomplete parameter documentation, but not about the absence of 
   425 # documentation.
   426 
   427 WARN_NO_PARAMDOC       = NO
   428 
   429 # The WARN_FORMAT tag determines the format of the warning messages that 
   430 # doxygen can produce. The string should contain the $file, $line, and $text 
   431 # tags, which will be replaced by the file and line number from which the 
   432 # warning originated and the warning text. Optionally the format may contain 
   433 # $version, which will be replaced by the version of the file (if it could 
   434 # be obtained via FILE_VERSION_FILTER)
   435 
   436 WARN_FORMAT            = "$file:$line: $text"
   437 
   438 # The WARN_LOGFILE tag can be used to specify a file to which warning 
   439 # and error messages should be written. If left blank the output is written 
   440 # to stderr.
   441 
   442 WARN_LOGFILE           = doxygen.log
   443 
   444 #---------------------------------------------------------------------------
   445 # configuration options related to the input files
   446 #---------------------------------------------------------------------------
   447 
   448 # The INPUT tag can be used to specify the files and/or directories that contain 
   449 # documented source files. You may enter file names like "myfile.cpp" or 
   450 # directories like "/usr/src/myproject". Separate the files or directories 
   451 # with spaces.
   452 
   453 INPUT                  = mainpage.dox \
   454                          getstart.dox \
   455                          quicktour.dox \
   456                          demoprograms.dox \
   457                          graphs.dox \
   458                          undir_graphs.dox \
   459                          named-param.dox \
   460                          maps.dox \
   461                          coding_style.dox \
   462                          groups.dox \
   463                          namespaces.dox \
   464                          license.dox \
   465                          developers_interface.dox \
   466                          graph_io.dox \
   467                          dirs.dox \
   468                          gwrappers.dox \
   469                          ../src/lemon \
   470                          ../src/lemon/concept \
   471                          ../src/test/test_tools.h
   472 
   473 # If the value of the INPUT tag contains directories, you can use the 
   474 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
   475 # and *.h) to filter out the source-files in the directories. If left 
   476 # blank the following patterns are tested: 
   477 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 
   478 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
   479 
   480 FILE_PATTERNS          = 
   481 
   482 # The RECURSIVE tag can be used to turn specify whether or not subdirectories 
   483 # should be searched for input files as well. Possible values are YES and NO. 
   484 # If left blank NO is used.
   485 
   486 RECURSIVE              = NO
   487 
   488 # The EXCLUDE tag can be used to specify files and/or directories that should 
   489 # excluded from the INPUT source files. This way you can easily exclude a 
   490 # subdirectory from a directory tree whose root is specified with the INPUT tag.
   491 
   492 EXCLUDE                = 
   493 
   494 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or 
   495 # directories that are symbolic links (a Unix filesystem feature) are excluded 
   496 # from the input.
   497 
   498 EXCLUDE_SYMLINKS       = NO
   499 
   500 # If the value of the INPUT tag contains directories, you can use the 
   501 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
   502 # certain files from those directories.
   503 
   504 EXCLUDE_PATTERNS       = 
   505 
   506 # The EXAMPLE_PATH tag can be used to specify one or more files or 
   507 # directories that contain example code fragments that are included (see 
   508 # the \include command).
   509 
   510 EXAMPLE_PATH           = ../src/demo \
   511                          ../LICENSE \
   512                          .
   513 
   514 # If the value of the EXAMPLE_PATH tag contains directories, you can use the 
   515 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
   516 # and *.h) to filter out the source-files in the directories. If left 
   517 # blank all files are included.
   518 
   519 EXAMPLE_PATTERNS       = 
   520 
   521 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
   522 # searched for input files to be used with the \include or \dontinclude 
   523 # commands irrespective of the value of the RECURSIVE tag. 
   524 # Possible values are YES and NO. If left blank NO is used.
   525 
   526 EXAMPLE_RECURSIVE      = NO
   527 
   528 # The IMAGE_PATH tag can be used to specify one or more files or 
   529 # directories that contain image that are included in the documentation (see 
   530 # the \image command).
   531 
   532 IMAGE_PATH             = images
   533 
   534 # The INPUT_FILTER tag can be used to specify a program that doxygen should 
   535 # invoke to filter for each input file. Doxygen will invoke the filter program 
   536 # by executing (via popen()) the command <filter> <input-file>, where <filter> 
   537 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
   538 # input file. Doxygen will then use the output that the filter program writes 
   539 # to standard output.  If FILTER_PATTERNS is specified, this tag will be 
   540 # ignored.
   541 
   542 INPUT_FILTER           = 
   543 
   544 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 
   545 # basis.  Doxygen will compare the file name with each pattern and apply the 
   546 # filter if there is a match.  The filters are a list of the form: 
   547 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 
   548 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
   549 # is applied to all files.
   550 
   551 FILTER_PATTERNS        = 
   552 
   553 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
   554 # INPUT_FILTER) will be used to filter the input files when producing source 
   555 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
   556 
   557 FILTER_SOURCE_FILES    = NO
   558 
   559 #---------------------------------------------------------------------------
   560 # configuration options related to source browsing
   561 #---------------------------------------------------------------------------
   562 
   563 # If the SOURCE_BROWSER tag is set to YES then a list of source files will 
   564 # be generated. Documented entities will be cross-referenced with these sources. 
   565 # Note: To get rid of all source code in the generated output, make sure also 
   566 # VERBATIM_HEADERS is set to NO.
   567 
   568 SOURCE_BROWSER         = YES
   569 
   570 # Setting the INLINE_SOURCES tag to YES will include the body 
   571 # of functions and classes directly in the documentation.
   572 
   573 INLINE_SOURCES         = NO
   574 
   575 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
   576 # doxygen to hide any special comment blocks from generated source code 
   577 # fragments. Normal C and C++ comments will always remain visible.
   578 
   579 STRIP_CODE_COMMENTS    = YES
   580 
   581 # If the REFERENCED_BY_RELATION tag is set to YES (the default) 
   582 # then for each documented function all documented 
   583 # functions referencing it will be listed.
   584 
   585 REFERENCED_BY_RELATION = NO
   586 
   587 # If the REFERENCES_RELATION tag is set to YES (the default) 
   588 # then for each documented function all documented entities 
   589 # called/used by that function will be listed.
   590 
   591 REFERENCES_RELATION    = NO
   592 
   593 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
   594 # will generate a verbatim copy of the header file for each class for 
   595 # which an include is specified. Set to NO to disable this.
   596 
   597 VERBATIM_HEADERS       = YES
   598 
   599 #---------------------------------------------------------------------------
   600 # configuration options related to the alphabetical class index
   601 #---------------------------------------------------------------------------
   602 
   603 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
   604 # of all compounds will be generated. Enable this if the project 
   605 # contains a lot of classes, structs, unions or interfaces.
   606 
   607 ALPHABETICAL_INDEX     = YES
   608 
   609 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
   610 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
   611 # in which this list will be split (can be a number in the range [1..20])
   612 
   613 COLS_IN_ALPHA_INDEX    = 2
   614 
   615 # In case all classes in a project start with a common prefix, all 
   616 # classes will be put under the same header in the alphabetical index. 
   617 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
   618 # should be ignored while generating the index headers.
   619 
   620 IGNORE_PREFIX          = 
   621 
   622 #---------------------------------------------------------------------------
   623 # configuration options related to the HTML output
   624 #---------------------------------------------------------------------------
   625 
   626 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
   627 # generate HTML output.
   628 
   629 GENERATE_HTML          = YES
   630 
   631 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
   632 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
   633 # put in front of it. If left blank `html' will be used as the default path.
   634 
   635 HTML_OUTPUT            = html
   636 
   637 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
   638 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
   639 # doxygen will generate files with .html extension.
   640 
   641 HTML_FILE_EXTENSION    = .html
   642 
   643 # The HTML_HEADER tag can be used to specify a personal HTML header for 
   644 # each generated HTML page. If it is left blank doxygen will generate a 
   645 # standard header.
   646 
   647 HTML_HEADER            = 
   648 
   649 # The HTML_FOOTER tag can be used to specify a personal HTML footer for 
   650 # each generated HTML page. If it is left blank doxygen will generate a 
   651 # standard footer.
   652 
   653 HTML_FOOTER            = 
   654 
   655 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
   656 # style sheet that is used by each HTML page. It can be used to 
   657 # fine-tune the look of the HTML output. If the tag is left blank doxygen 
   658 # will generate a default style sheet. Note that doxygen will try to copy 
   659 # the style sheet file to the HTML output directory, so don't put your own 
   660 # stylesheet in the HTML output directory as well, or it will be erased!
   661 
   662 HTML_STYLESHEET        = 
   663 
   664 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
   665 # files or namespaces will be aligned in HTML using tables. If set to 
   666 # NO a bullet list will be used.
   667 
   668 HTML_ALIGN_MEMBERS     = YES
   669 
   670 # If the GENERATE_HTMLHELP tag is set to YES, additional index files 
   671 # will be generated that can be used as input for tools like the 
   672 # Microsoft HTML help workshop to generate a compressed HTML help file (.chm) 
   673 # of the generated HTML documentation.
   674 
   675 GENERATE_HTMLHELP      = NO
   676 
   677 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
   678 # be used to specify the file name of the resulting .chm file. You 
   679 # can add a path in front of the file if the result should not be 
   680 # written to the html output directory.
   681 
   682 CHM_FILE               = 
   683 
   684 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 
   685 # be used to specify the location (absolute path including file name) of 
   686 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 
   687 # the HTML help compiler on the generated index.hhp.
   688 
   689 HHC_LOCATION           = 
   690 
   691 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
   692 # controls if a separate .chi index file is generated (YES) or that 
   693 # it should be included in the master .chm file (NO).
   694 
   695 GENERATE_CHI           = NO
   696 
   697 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
   698 # controls whether a binary table of contents is generated (YES) or a 
   699 # normal table of contents (NO) in the .chm file.
   700 
   701 BINARY_TOC             = NO
   702 
   703 # The TOC_EXPAND flag can be set to YES to add extra items for group members 
   704 # to the contents of the HTML help documentation and to the tree view.
   705 
   706 TOC_EXPAND             = NO
   707 
   708 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
   709 # top of each HTML page. The value NO (the default) enables the index and 
   710 # the value YES disables it.
   711 
   712 DISABLE_INDEX          = NO
   713 
   714 # This tag can be used to set the number of enum values (range [1..20]) 
   715 # that doxygen will group on one line in the generated HTML documentation.
   716 
   717 ENUM_VALUES_PER_LINE   = 4
   718 
   719 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
   720 # generated containing a tree-like index structure (just like the one that 
   721 # is generated for HTML Help). For this to work a browser that supports 
   722 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
   723 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
   724 # probably better off using the HTML help feature.
   725 
   726 GENERATE_TREEVIEW      = YES
   727 
   728 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
   729 # used to set the initial width (in pixels) of the frame in which the tree 
   730 # is shown.
   731 
   732 TREEVIEW_WIDTH         = 250
   733 
   734 #---------------------------------------------------------------------------
   735 # configuration options related to the LaTeX output
   736 #---------------------------------------------------------------------------
   737 
   738 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
   739 # generate Latex output.
   740 
   741 GENERATE_LATEX         = NO
   742 
   743 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
   744 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
   745 # put in front of it. If left blank `latex' will be used as the default path.
   746 
   747 LATEX_OUTPUT           = latex
   748 
   749 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 
   750 # invoked. If left blank `latex' will be used as the default command name.
   751 
   752 LATEX_CMD_NAME         = latex
   753 
   754 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
   755 # generate index for LaTeX. If left blank `makeindex' will be used as the 
   756 # default command name.
   757 
   758 MAKEINDEX_CMD_NAME     = makeindex
   759 
   760 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
   761 # LaTeX documents. This may be useful for small projects and may help to 
   762 # save some trees in general.
   763 
   764 COMPACT_LATEX          = YES
   765 
   766 # The PAPER_TYPE tag can be used to set the paper type that is used 
   767 # by the printer. Possible values are: a4, a4wide, letter, legal and 
   768 # executive. If left blank a4wide will be used.
   769 
   770 PAPER_TYPE             = a4wide
   771 
   772 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
   773 # packages that should be included in the LaTeX output.
   774 
   775 EXTRA_PACKAGES         = 
   776 
   777 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
   778 # the generated latex document. The header should contain everything until 
   779 # the first chapter. If it is left blank doxygen will generate a 
   780 # standard header. Notice: only use this tag if you know what you are doing!
   781 
   782 LATEX_HEADER           = 
   783 
   784 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
   785 # is prepared for conversion to pdf (using ps2pdf). The pdf file will 
   786 # contain links (just like the HTML output) instead of page references 
   787 # This makes the output suitable for online browsing using a pdf viewer.
   788 
   789 PDF_HYPERLINKS         = YES
   790 
   791 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
   792 # plain latex in the generated Makefile. Set this option to YES to get a 
   793 # higher quality PDF documentation.
   794 
   795 USE_PDFLATEX           = YES
   796 
   797 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
   798 # command to the generated LaTeX files. This will instruct LaTeX to keep 
   799 # running if errors occur, instead of asking the user for help. 
   800 # This option is also used when generating formulas in HTML.
   801 
   802 LATEX_BATCHMODE        = NO
   803 
   804 # If LATEX_HIDE_INDICES is set to YES then doxygen will not 
   805 # include the index chapters (such as File Index, Compound Index, etc.) 
   806 # in the output.
   807 
   808 LATEX_HIDE_INDICES     = NO
   809 
   810 #---------------------------------------------------------------------------
   811 # configuration options related to the RTF output
   812 #---------------------------------------------------------------------------
   813 
   814 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
   815 # The RTF output is optimized for Word 97 and may not look very pretty with 
   816 # other RTF readers or editors.
   817 
   818 GENERATE_RTF           = NO
   819 
   820 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
   821 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
   822 # put in front of it. If left blank `rtf' will be used as the default path.
   823 
   824 RTF_OUTPUT             = rtf
   825 
   826 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
   827 # RTF documents. This may be useful for small projects and may help to 
   828 # save some trees in general.
   829 
   830 COMPACT_RTF            = NO
   831 
   832 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
   833 # will contain hyperlink fields. The RTF file will 
   834 # contain links (just like the HTML output) instead of page references. 
   835 # This makes the output suitable for online browsing using WORD or other 
   836 # programs which support those fields. 
   837 # Note: wordpad (write) and others do not support links.
   838 
   839 RTF_HYPERLINKS         = NO
   840 
   841 # Load stylesheet definitions from file. Syntax is similar to doxygen's 
   842 # config file, i.e. a series of assignments. You only have to provide 
   843 # replacements, missing definitions are set to their default value.
   844 
   845 RTF_STYLESHEET_FILE    = 
   846 
   847 # Set optional variables used in the generation of an rtf document. 
   848 # Syntax is similar to doxygen's config file.
   849 
   850 RTF_EXTENSIONS_FILE    = 
   851 
   852 #---------------------------------------------------------------------------
   853 # configuration options related to the man page output
   854 #---------------------------------------------------------------------------
   855 
   856 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
   857 # generate man pages
   858 
   859 GENERATE_MAN           = NO
   860 
   861 # The MAN_OUTPUT tag is used to specify where the man pages will be put. 
   862 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
   863 # put in front of it. If left blank `man' will be used as the default path.
   864 
   865 MAN_OUTPUT             = man
   866 
   867 # The MAN_EXTENSION tag determines the extension that is added to 
   868 # the generated man pages (default is the subroutine's section .3)
   869 
   870 MAN_EXTENSION          = .3
   871 
   872 # If the MAN_LINKS tag is set to YES and Doxygen generates man output, 
   873 # then it will generate one additional man file for each entity 
   874 # documented in the real man page(s). These additional files 
   875 # only source the real man page, but without them the man command 
   876 # would be unable to find the correct page. The default is NO.
   877 
   878 MAN_LINKS              = NO
   879 
   880 #---------------------------------------------------------------------------
   881 # configuration options related to the XML output
   882 #---------------------------------------------------------------------------
   883 
   884 # If the GENERATE_XML tag is set to YES Doxygen will 
   885 # generate an XML file that captures the structure of 
   886 # the code including all documentation.
   887 
   888 GENERATE_XML           = NO
   889 
   890 # The XML_OUTPUT tag is used to specify where the XML pages will be put. 
   891 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
   892 # put in front of it. If left blank `xml' will be used as the default path.
   893 
   894 XML_OUTPUT             = xml
   895 
   896 # The XML_SCHEMA tag can be used to specify an XML schema, 
   897 # which can be used by a validating XML parser to check the 
   898 # syntax of the XML files.
   899 
   900 XML_SCHEMA             = 
   901 
   902 # The XML_DTD tag can be used to specify an XML DTD, 
   903 # which can be used by a validating XML parser to check the 
   904 # syntax of the XML files.
   905 
   906 XML_DTD                = 
   907 
   908 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will 
   909 # dump the program listings (including syntax highlighting 
   910 # and cross-referencing information) to the XML output. Note that 
   911 # enabling this will significantly increase the size of the XML output.
   912 
   913 XML_PROGRAMLISTING     = YES
   914 
   915 #---------------------------------------------------------------------------
   916 # configuration options for the AutoGen Definitions output
   917 #---------------------------------------------------------------------------
   918 
   919 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 
   920 # generate an AutoGen Definitions (see autogen.sf.net) file 
   921 # that captures the structure of the code including all 
   922 # documentation. Note that this feature is still experimental 
   923 # and incomplete at the moment.
   924 
   925 GENERATE_AUTOGEN_DEF   = NO
   926 
   927 #---------------------------------------------------------------------------
   928 # configuration options related to the Perl module output
   929 #---------------------------------------------------------------------------
   930 
   931 # If the GENERATE_PERLMOD tag is set to YES Doxygen will 
   932 # generate a Perl module file that captures the structure of 
   933 # the code including all documentation. Note that this 
   934 # feature is still experimental and incomplete at the 
   935 # moment.
   936 
   937 GENERATE_PERLMOD       = NO
   938 
   939 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate 
   940 # the necessary Makefile rules, Perl scripts and LaTeX code to be able 
   941 # to generate PDF and DVI output from the Perl module output.
   942 
   943 PERLMOD_LATEX          = NO
   944 
   945 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 
   946 # nicely formatted so it can be parsed by a human reader.  This is useful 
   947 # if you want to understand what is going on.  On the other hand, if this 
   948 # tag is set to NO the size of the Perl module output will be much smaller 
   949 # and Perl will parse it just the same.
   950 
   951 PERLMOD_PRETTY         = YES
   952 
   953 # The names of the make variables in the generated doxyrules.make file 
   954 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 
   955 # This is useful so different doxyrules.make files included by the same 
   956 # Makefile don't overwrite each other's variables.
   957 
   958 PERLMOD_MAKEVAR_PREFIX = 
   959 
   960 #---------------------------------------------------------------------------
   961 # Configuration options related to the preprocessor   
   962 #---------------------------------------------------------------------------
   963 
   964 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 
   965 # evaluate all C-preprocessor directives found in the sources and include 
   966 # files.
   967 
   968 ENABLE_PREPROCESSING   = YES
   969 
   970 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 
   971 # names in the source code. If set to NO (the default) only conditional 
   972 # compilation will be performed. Macro expansion can be done in a controlled 
   973 # way by setting EXPAND_ONLY_PREDEF to YES.
   974 
   975 MACRO_EXPANSION        = NO
   976 
   977 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 
   978 # then the macro expansion is limited to the macros specified with the 
   979 # PREDEFINED and EXPAND_AS_PREDEFINED tags.
   980 
   981 EXPAND_ONLY_PREDEF     = NO
   982 
   983 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 
   984 # in the INCLUDE_PATH (see below) will be search if a #include is found.
   985 
   986 SEARCH_INCLUDES        = YES
   987 
   988 # The INCLUDE_PATH tag can be used to specify one or more directories that 
   989 # contain include files that are not input files but should be processed by 
   990 # the preprocessor.
   991 
   992 INCLUDE_PATH           = 
   993 
   994 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
   995 # patterns (like *.h and *.hpp) to filter out the header-files in the 
   996 # directories. If left blank, the patterns specified with FILE_PATTERNS will 
   997 # be used.
   998 
   999 INCLUDE_FILE_PATTERNS  = 
  1000 
  1001 # The PREDEFINED tag can be used to specify one or more macro names that 
  1002 # are defined before the preprocessor is started (similar to the -D option of 
  1003 # gcc). The argument of the tag is a list of macros of the form: name 
  1004 # or name=definition (no spaces). If the definition and the = are 
  1005 # omitted =1 is assumed. To prevent a macro definition from being 
  1006 # undefined via #undef or recursively expanded use the := operator 
  1007 # instead of the = operator.
  1008 
  1009 PREDEFINED             = DOXYGEN
  1010 
  1011 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
  1012 # this tag can be used to specify a list of macro names that should be expanded. 
  1013 # The macro definition that is found in the sources will be used. 
  1014 # Use the PREDEFINED tag if you want to use a different macro definition.
  1015 
  1016 EXPAND_AS_DEFINED      = 
  1017 
  1018 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 
  1019 # doxygen's preprocessor will remove all function-like macros that are alone 
  1020 # on a line, have an all uppercase name, and do not end with a semicolon. Such 
  1021 # function macros are typically used for boiler-plate code, and will confuse 
  1022 # the parser if not removed.
  1023 
  1024 SKIP_FUNCTION_MACROS   = YES
  1025 
  1026 #---------------------------------------------------------------------------
  1027 # Configuration::additions related to external references   
  1028 #---------------------------------------------------------------------------
  1029 
  1030 # The TAGFILES option can be used to specify one or more tagfiles. 
  1031 # Optionally an initial location of the external documentation 
  1032 # can be added for each tagfile. The format of a tag file without 
  1033 # this location is as follows: 
  1034 #   TAGFILES = file1 file2 ... 
  1035 # Adding location for the tag files is done as follows: 
  1036 #   TAGFILES = file1=loc1 "file2 = loc2" ... 
  1037 # where "loc1" and "loc2" can be relative or absolute paths or 
  1038 # URLs. If a location is present for each tag, the installdox tool 
  1039 # does not have to be run to correct the links.
  1040 # Note that each tag file must have a unique name
  1041 # (where the name does NOT include the path)
  1042 # If a tag file is not located in the directory in which doxygen 
  1043 # is run, you must also specify the path to the tagfile here.
  1044 
  1045 TAGFILES               = 
  1046 
  1047 # When a file name is specified after GENERATE_TAGFILE, doxygen will create 
  1048 # a tag file that is based on the input files it reads.
  1049 
  1050 GENERATE_TAGFILE       = 
  1051 
  1052 # If the ALLEXTERNALS tag is set to YES all external classes will be listed 
  1053 # in the class index. If set to NO only the inherited external classes 
  1054 # will be listed.
  1055 
  1056 ALLEXTERNALS           = NO
  1057 
  1058 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 
  1059 # in the modules index. If set to NO, only the current project's groups will 
  1060 # be listed.
  1061 
  1062 EXTERNAL_GROUPS        = YES
  1063 
  1064 # The PERL_PATH should be the absolute path and name of the perl script 
  1065 # interpreter (i.e. the result of `which perl').
  1066 
  1067 PERL_PATH              = /usr/bin/perl
  1068 
  1069 #---------------------------------------------------------------------------
  1070 # Configuration options related to the dot tool   
  1071 #---------------------------------------------------------------------------
  1072 
  1073 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
  1074 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base 
  1075 # or super classes. Setting the tag to NO turns the diagrams off. Note that 
  1076 # this option is superseded by the HAVE_DOT option below. This is only a 
  1077 # fallback. It is recommended to install and use dot, since it yields more 
  1078 # powerful graphs.
  1079 
  1080 CLASS_DIAGRAMS         = YES
  1081 
  1082 # If set to YES, the inheritance and collaboration graphs will hide 
  1083 # inheritance and usage relations if the target is undocumented 
  1084 # or is not a class.
  1085 
  1086 HIDE_UNDOC_RELATIONS   = NO
  1087 
  1088 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
  1089 # available from the path. This tool is part of Graphviz, a graph visualization 
  1090 # toolkit from AT&T and Lucent Bell Labs. The other options in this section 
  1091 # have no effect if this option is set to NO (the default)
  1092 
  1093 HAVE_DOT               = YES
  1094 
  1095 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
  1096 # will generate a graph for each documented class showing the direct and 
  1097 # indirect inheritance relations. Setting this tag to YES will force the 
  1098 # the CLASS_DIAGRAMS tag to NO.
  1099 
  1100 CLASS_GRAPH            = YES
  1101 
  1102 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 
  1103 # will generate a graph for each documented class showing the direct and 
  1104 # indirect implementation dependencies (inheritance, containment, and 
  1105 # class references variables) of the class with other documented classes.
  1106 
  1107 COLLABORATION_GRAPH    = YES
  1108 
  1109 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen 
  1110 # will generate a graph for groups, showing the direct groups dependencies
  1111 
  1112 GROUP_GRAPHS           = YES
  1113 
  1114 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and 
  1115 # collaboration diagrams in a style similar to the OMG's Unified Modeling 
  1116 # Language.
  1117 
  1118 UML_LOOK               = NO
  1119 
  1120 # If set to YES, the inheritance and collaboration graphs will show the 
  1121 # relations between templates and their instances.
  1122 
  1123 TEMPLATE_RELATIONS     = YES
  1124 
  1125 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 
  1126 # tags are set to YES then doxygen will generate a graph for each documented 
  1127 # file showing the direct and indirect include dependencies of the file with 
  1128 # other documented files.
  1129 
  1130 INCLUDE_GRAPH          = YES
  1131 
  1132 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 
  1133 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each 
  1134 # documented header file showing the documented files that directly or 
  1135 # indirectly include this file.
  1136 
  1137 INCLUDED_BY_GRAPH      = YES
  1138 
  1139 # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will 
  1140 # generate a call dependency graph for every global function or class method. 
  1141 # Note that enabling this option will significantly increase the time of a run. 
  1142 # So in most cases it will be better to enable call graphs for selected 
  1143 # functions only using the \callgraph command.
  1144 
  1145 CALL_GRAPH             = YES
  1146 
  1147 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 
  1148 # will graphical hierarchy of all classes instead of a textual one.
  1149 
  1150 GRAPHICAL_HIERARCHY    = YES
  1151 
  1152 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES 
  1153 # then doxygen will show the dependencies a directory has on other directories 
  1154 # in a graphical way. The dependency relations are determined by the #include
  1155 # relations between the files in the directories.
  1156 
  1157 DIRECTORY_GRAPH        = YES
  1158 
  1159 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
  1160 # generated by dot. Possible values are png, jpg, or gif
  1161 # If left blank png will be used.
  1162 
  1163 DOT_IMAGE_FORMAT       = png
  1164 
  1165 # The tag DOT_PATH can be used to specify the path where the dot tool can be 
  1166 # found. If left blank, it is assumed the dot tool can be found in the path.
  1167 
  1168 DOT_PATH               = 
  1169 
  1170 # The DOTFILE_DIRS tag can be used to specify one or more directories that 
  1171 # contain dot files that are included in the documentation (see the 
  1172 # \dotfile command).
  1173 
  1174 DOTFILE_DIRS           = 
  1175 
  1176 # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width 
  1177 # (in pixels) of the graphs generated by dot. If a graph becomes larger than 
  1178 # this value, doxygen will try to truncate the graph, so that it fits within 
  1179 # the specified constraint. Beware that most browsers cannot cope with very 
  1180 # large images.
  1181 
  1182 MAX_DOT_GRAPH_WIDTH    = 1024
  1183 
  1184 # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height 
  1185 # (in pixels) of the graphs generated by dot. If a graph becomes larger than 
  1186 # this value, doxygen will try to truncate the graph, so that it fits within 
  1187 # the specified constraint. Beware that most browsers cannot cope with very 
  1188 # large images.
  1189 
  1190 MAX_DOT_GRAPH_HEIGHT   = 1024
  1191 
  1192 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
  1193 # graphs generated by dot. A depth value of 3 means that only nodes reachable 
  1194 # from the root by following a path via at most 3 edges will be shown. Nodes 
  1195 # that lay further from the root node will be omitted. Note that setting this 
  1196 # option to 1 or 2 may greatly reduce the computation time needed for large 
  1197 # code bases. Also note that a graph may be further truncated if the graph's 
  1198 # image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH 
  1199 # and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), 
  1200 # the graph is not depth-constrained.
  1201 
  1202 MAX_DOT_GRAPH_DEPTH    = 0
  1203 
  1204 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent 
  1205 # background. This is disabled by default, which results in a white background. 
  1206 # Warning: Depending on the platform used, enabling this option may lead to 
  1207 # badly anti-aliased labels on the edges of a graph (i.e. they become hard to 
  1208 # read).
  1209 
  1210 DOT_TRANSPARENT        = NO
  1211 
  1212 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output 
  1213 # files in one run (i.e. multiple -o and -T options on the command line). This 
  1214 # makes dot run faster, but since only newer versions of dot (>1.8.10) 
  1215 # support this, this feature is disabled by default.
  1216 
  1217 DOT_MULTI_TARGETS      = NO
  1218 
  1219 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 
  1220 # generate a legend page explaining the meaning of the various boxes and 
  1221 # arrows in the dot generated graphs.
  1222 
  1223 GENERATE_LEGEND        = YES
  1224 
  1225 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 
  1226 # remove the intermediate dot files that are used to generate 
  1227 # the various graphs.
  1228 
  1229 DOT_CLEANUP            = YES
  1230 
  1231 #---------------------------------------------------------------------------
  1232 # Configuration::additions related to the search engine   
  1233 #---------------------------------------------------------------------------
  1234 
  1235 # The SEARCHENGINE tag specifies whether or not a search engine should be 
  1236 # used. If set to NO the values of all tags below this one will be ignored.
  1237 
  1238 SEARCHENGINE           = NO