doc/Doxyfile
author alpar
Sat, 08 Jan 2005 20:12:50 +0000
changeset 1061 e3433c024123
parent 991 e619a466ca5d
child 1063 d53a12d49262
permissions -rw-r--r--
- Empty doxygen comments
- sconst -> const
     1 # Doxyfile 1.3.9
     2 
     3 # This file describes the settings to be used by the documentation system
     4 # doxygen (www.doxygen.org) for a project
     5 #
     6 # All text after a hash (#) is considered a comment and will be ignored
     7 # The format is:
     8 #       TAG = value [value, ...]
     9 # For lists items can also be appended using:
    10 #       TAG += value [value, ...]
    11 # Values that contain spaces should be placed between quotes (" ")
    12 
    13 #---------------------------------------------------------------------------
    14 # Project related configuration options
    15 #---------------------------------------------------------------------------
    16 
    17 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
    18 # by quotes) that should identify the project.
    19 
    20 PROJECT_NAME           = LEMON
    21 
    22 # The PROJECT_NUMBER tag can be used to enter a project or revision number. 
    23 # This could be handy for archiving the generated documentation or 
    24 # if some version control system is used.
    25 
    26 PROJECT_NUMBER         = 0.3
    27 
    28 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
    29 # base path where the generated documentation will be put. 
    30 # If a relative path is entered, it will be relative to the location 
    31 # where doxygen was started. If left blank the current directory will be used.
    32 
    33 OUTPUT_DIRECTORY       = 
    34 
    35 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
    36 # 4096 sub-directories (in 2 levels) under the output directory of each output 
    37 # format and will distribute the generated files over these directories. 
    38 # Enabling this option can be useful when feeding doxygen a huge amount of source 
    39 # files, where putting all generated files in the same directory would otherwise 
    40 # cause performance problems for the file system.
    41 
    42 CREATE_SUBDIRS         = NO
    43 
    44 # The OUTPUT_LANGUAGE tag is used to specify the language in which all 
    45 # documentation generated by doxygen is written. Doxygen will use this 
    46 # information to generate all constant output in the proper language. 
    47 # The default language is English, other supported languages are: 
    48 # Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, 
    49 # Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, 
    50 # Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, 
    51 # Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, 
    52 # Swedish, and Ukrainian.
    53 
    54 OUTPUT_LANGUAGE        = English
    55 
    56 # This tag can be used to specify the encoding used in the generated output. 
    57 # The encoding is not always determined by the language that is chosen, 
    58 # but also whether or not the output is meant for Windows or non-Windows users. 
    59 # In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES 
    60 # forces the Windows encoding (this is the default for the Windows binary), 
    61 # whereas setting the tag to NO uses a Unix-style encoding (the default for 
    62 # all platforms other than Windows).
    63 
    64 USE_WINDOWS_ENCODING   = NO
    65 
    66 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
    67 # include brief member descriptions after the members that are listed in 
    68 # the file and class documentation (similar to JavaDoc). 
    69 # Set to NO to disable this.
    70 
    71 BRIEF_MEMBER_DESC      = YES
    72 
    73 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
    74 # the brief description of a member or function before the detailed description. 
    75 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
    76 # brief descriptions will be completely suppressed.
    77 
    78 REPEAT_BRIEF           = NO
    79 
    80 # This tag implements a quasi-intelligent brief description abbreviator 
    81 # that is used to form the text in various listings. Each string 
    82 # in this list, if found as the leading text of the brief description, will be 
    83 # stripped from the text and the result after processing the whole list, is used 
    84 # as the annotated text. Otherwise, the brief description is used as-is. If left 
    85 # blank, the following values are used ("$name" is automatically replaced with the 
    86 # name of the entity): "The $name class" "The $name widget" "The $name file" 
    87 # "is" "provides" "specifies" "contains" "represents" "a" "an" "the"
    88 
    89 ABBREVIATE_BRIEF       = 
    90 
    91 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
    92 # Doxygen will generate a detailed section even if there is only a brief 
    93 # description.
    94 
    95 ALWAYS_DETAILED_SEC    = NO
    96 
    97 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited 
    98 # members of a class in the documentation of that class as if those members were 
    99 # ordinary class members. Constructors, destructors and assignment operators of 
   100 # the base classes will not be shown.
   101 
   102 INLINE_INHERITED_MEMB  = NO
   103 
   104 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
   105 # path before files name in the file list and in the header files. If set 
   106 # to NO the shortest path that makes the file name unique will be used.
   107 
   108 FULL_PATH_NAMES        = YES
   109 
   110 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
   111 # can be used to strip a user-defined part of the path. Stripping is 
   112 # only done if one of the specified strings matches the left-hand part of 
   113 # the path. The tag can be used to show relative paths in the file list. 
   114 # If left blank the directory from which doxygen is run is used as the 
   115 # path to strip.
   116 
   117 STRIP_FROM_PATH        = ../src
   118 
   119 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
   120 # the path mentioned in the documentation of a class, which tells 
   121 # the reader which header file to include in order to use a class. 
   122 # If left blank only the name of the header file containing the class 
   123 # definition is used. Otherwise one should specify the include paths that 
   124 # are normally passed to the compiler using the -I flag.
   125 
   126 STRIP_FROM_INC_PATH    = ../src
   127 
   128 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
   129 # (but less readable) file names. This can be useful is your file systems 
   130 # doesn't support long names like on DOS, Mac, or CD-ROM.
   131 
   132 SHORT_NAMES            = NO
   133 
   134 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
   135 # will interpret the first line (until the first dot) of a JavaDoc-style 
   136 # comment as the brief description. If set to NO, the JavaDoc 
   137 # comments will behave just like the Qt-style comments (thus requiring an 
   138 # explicit @brief command for a brief description.
   139 
   140 JAVADOC_AUTOBRIEF      = NO
   141 
   142 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
   143 # treat a multi-line C++ special comment block (i.e. a block of //! or /// 
   144 # comments) as a brief description. This used to be the default behaviour. 
   145 # The new default is to treat a multi-line C++ comment block as a detailed 
   146 # description. Set this tag to YES if you prefer the old behaviour instead.
   147 
   148 MULTILINE_CPP_IS_BRIEF = NO
   149 
   150 # If the DETAILS_AT_TOP tag is set to YES then Doxygen 
   151 # will output the detailed description near the top, like JavaDoc.
   152 # If set to NO, the detailed description appears after the member 
   153 # documentation.
   154 
   155 DETAILS_AT_TOP         = YES
   156 
   157 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
   158 # member inherits the documentation from any documented member that it 
   159 # re-implements.
   160 
   161 INHERIT_DOCS           = NO
   162 
   163 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
   164 # tag is set to YES, then doxygen will reuse the documentation of the first 
   165 # member in the group (if any) for the other members of the group. By default 
   166 # all members of a group must be documented explicitly.
   167 
   168 DISTRIBUTE_GROUP_DOC   = NO
   169 
   170 # The TAB_SIZE tag can be used to set the number of spaces in a tab. 
   171 # Doxygen uses this value to replace tabs by spaces in code fragments.
   172 
   173 TAB_SIZE               = 8
   174 
   175 # This tag can be used to specify a number of aliases that acts 
   176 # as commands in the documentation. An alias has the form "name=value". 
   177 # For example adding "sideeffect=\par Side Effects:\n" will allow you to 
   178 # put the command \sideeffect (or @sideeffect) in the documentation, which 
   179 # will result in a user-defined paragraph with heading "Side Effects:". 
   180 # You can put \n's in the value part of an alias to insert newlines.
   181 
   182 ALIASES                = 
   183 
   184 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources 
   185 # only. Doxygen will then generate output that is more tailored for C. 
   186 # For instance, some of the names that are used will be different. The list 
   187 # of all members will be omitted, etc.
   188 
   189 OPTIMIZE_OUTPUT_FOR_C  = NO
   190 
   191 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources 
   192 # only. Doxygen will then generate output that is more tailored for Java. 
   193 # For instance, namespaces will be presented as packages, qualified scopes 
   194 # will look different, etc.
   195 
   196 OPTIMIZE_OUTPUT_JAVA   = NO
   197 
   198 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
   199 # the same type (for instance a group of public functions) to be put as a 
   200 # subgroup of that type (e.g. under the Public Functions section). Set it to 
   201 # NO to prevent subgrouping. Alternatively, this can be done per class using 
   202 # the \nosubgrouping command.
   203 
   204 SUBGROUPING            = YES
   205 
   206 #---------------------------------------------------------------------------
   207 # Build related configuration options
   208 #---------------------------------------------------------------------------
   209 
   210 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
   211 # documentation are documented, even if no documentation was available. 
   212 # Private class members and static file members will be hidden unless 
   213 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
   214 
   215 EXTRACT_ALL            = NO
   216 
   217 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
   218 # will be included in the documentation.
   219 
   220 EXTRACT_PRIVATE        = NO
   221 
   222 # If the EXTRACT_STATIC tag is set to YES all static members of a file 
   223 # will be included in the documentation.
   224 
   225 EXTRACT_STATIC         = NO
   226 
   227 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
   228 # defined locally in source files will be included in the documentation. 
   229 # If set to NO only classes defined in header files are included.
   230 
   231 EXTRACT_LOCAL_CLASSES  = YES
   232 
   233 # This flag is only useful for Objective-C code. When set to YES local 
   234 # methods, which are defined in the implementation section but not in 
   235 # the interface are included in the documentation. 
   236 # If set to NO (the default) only methods in the interface are included.
   237 
   238 EXTRACT_LOCAL_METHODS  = NO
   239 
   240 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
   241 # undocumented members of documented classes, files or namespaces. 
   242 # If set to NO (the default) these members will be included in the 
   243 # various overviews, but no documentation section is generated. 
   244 # This option has no effect if EXTRACT_ALL is enabled.
   245 
   246 HIDE_UNDOC_MEMBERS     = YES
   247 
   248 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
   249 # undocumented classes that are normally visible in the class hierarchy. 
   250 # If set to NO (the default) these classes will be included in the various 
   251 # overviews. This option has no effect if EXTRACT_ALL is enabled.
   252 
   253 HIDE_UNDOC_CLASSES     = YES
   254 
   255 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
   256 # friend (class|struct|union) declarations. 
   257 # If set to NO (the default) these declarations will be included in the 
   258 # documentation.
   259 
   260 HIDE_FRIEND_COMPOUNDS  = NO
   261 
   262 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
   263 # documentation blocks found inside the body of a function. 
   264 # If set to NO (the default) these blocks will be appended to the 
   265 # function's detailed documentation block.
   266 
   267 HIDE_IN_BODY_DOCS      = NO
   268 
   269 # The INTERNAL_DOCS tag determines if documentation 
   270 # that is typed after a \internal command is included. If the tag is set 
   271 # to NO (the default) then the documentation will be excluded. 
   272 # Set it to YES to include the internal documentation.
   273 
   274 INTERNAL_DOCS          = NO
   275 
   276 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
   277 # file names in lower-case letters. If set to YES upper-case letters are also 
   278 # allowed. This is useful if you have classes or files whose names only differ 
   279 # in case and if your file system supports case sensitive file names. Windows 
   280 # and Mac users are advised to set this option to NO.
   281 
   282 CASE_SENSE_NAMES       = YES
   283 
   284 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
   285 # will show members with their full class and namespace scopes in the 
   286 # documentation. If set to YES the scope will be hidden.
   287 
   288 HIDE_SCOPE_NAMES       = YES
   289 
   290 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
   291 # will put a list of the files that are included by a file in the documentation 
   292 # of that file.
   293 
   294 SHOW_INCLUDE_FILES     = YES
   295 
   296 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
   297 # is inserted in the documentation for inline members.
   298 
   299 INLINE_INFO            = YES
   300 
   301 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
   302 # will sort the (detailed) documentation of file and class members 
   303 # alphabetically by member name. If set to NO the members will appear in 
   304 # declaration order.
   305 
   306 SORT_MEMBER_DOCS       = NO
   307 
   308 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
   309 # brief documentation of file, namespace and class members alphabetically 
   310 # by member name. If set to NO (the default) the members will appear in 
   311 # declaration order.
   312 
   313 SORT_BRIEF_DOCS        = NO
   314 
   315 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
   316 # sorted by fully-qualified names, including namespaces. If set to 
   317 # NO (the default), the class list will be sorted only by class name, 
   318 # not including the namespace part. 
   319 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
   320 # Note: This option applies only to the class list, not to the 
   321 # alphabetical list.
   322 
   323 SORT_BY_SCOPE_NAME     = NO
   324 
   325 # The GENERATE_TODOLIST tag can be used to enable (YES) or 
   326 # disable (NO) the todo list. This list is created by putting \todo 
   327 # commands in the documentation.
   328 
   329 GENERATE_TODOLIST      = YES
   330 
   331 # The GENERATE_TESTLIST tag can be used to enable (YES) or 
   332 # disable (NO) the test list. This list is created by putting \test 
   333 # commands in the documentation.
   334 
   335 GENERATE_TESTLIST      = YES
   336 
   337 # The GENERATE_BUGLIST tag can be used to enable (YES) or 
   338 # disable (NO) the bug list. This list is created by putting \bug 
   339 # commands in the documentation.
   340 
   341 GENERATE_BUGLIST       = YES
   342 
   343 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
   344 # disable (NO) the deprecated list. This list is created by putting 
   345 # \deprecated commands in the documentation.
   346 
   347 GENERATE_DEPRECATEDLIST= YES
   348 
   349 # The ENABLED_SECTIONS tag can be used to enable conditional 
   350 # documentation sections, marked by \if sectionname ... \endif.
   351 
   352 ENABLED_SECTIONS       = 
   353 
   354 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
   355 # the initial value of a variable or define consists of for it to appear in 
   356 # the documentation. If the initializer consists of more lines than specified 
   357 # here it will be hidden. Use a value of 0 to hide initializers completely. 
   358 # The appearance of the initializer of individual variables and defines in the 
   359 # documentation can be controlled using \showinitializer or \hideinitializer 
   360 # command in the documentation regardless of this setting.
   361 
   362 MAX_INITIALIZER_LINES  = 30
   363 
   364 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
   365 # at the bottom of the documentation of classes and structs. If set to YES the 
   366 # list will mention the files that were used to generate the documentation.
   367 
   368 SHOW_USED_FILES        = YES
   369 
   370 # If the sources in your project are distributed over multiple directories 
   371 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 
   372 # in the documentation.
   373 
   374 SHOW_DIRECTORIES       = YES
   375 
   376 #---------------------------------------------------------------------------
   377 # configuration options related to warning and progress messages
   378 #---------------------------------------------------------------------------
   379 
   380 # The QUIET tag can be used to turn on/off the messages that are generated 
   381 # by doxygen. Possible values are YES and NO. If left blank NO is used.
   382 
   383 QUIET                  = NO
   384 
   385 # The WARNINGS tag can be used to turn on/off the warning messages that are 
   386 # generated by doxygen. Possible values are YES and NO. If left blank 
   387 # NO is used.
   388 
   389 WARNINGS               = YES
   390 
   391 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
   392 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
   393 # automatically be disabled.
   394 
   395 WARN_IF_UNDOCUMENTED   = YES
   396 
   397 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
   398 # potential errors in the documentation, such as not documenting some 
   399 # parameters in a documented function, or documenting parameters that 
   400 # don't exist or using markup commands wrongly.
   401 
   402 WARN_IF_DOC_ERROR      = YES
   403 
   404 # The WARN_FORMAT tag determines the format of the warning messages that 
   405 # doxygen can produce. The string should contain the $file, $line, and $text 
   406 # tags, which will be replaced by the file and line number from which the 
   407 # warning originated and the warning text.
   408 
   409 WARN_FORMAT            = "$file:$line: $text"
   410 
   411 # The WARN_LOGFILE tag can be used to specify a file to which warning 
   412 # and error messages should be written. If left blank the output is written 
   413 # to stderr.
   414 
   415 WARN_LOGFILE           = doxygen.log
   416 
   417 #---------------------------------------------------------------------------
   418 # configuration options related to the input files
   419 #---------------------------------------------------------------------------
   420 
   421 # The INPUT tag can be used to specify the files and/or directories that contain 
   422 # documented source files. You may enter file names like "myfile.cpp" or 
   423 # directories like "/usr/src/myproject". Separate the files or directories 
   424 # with spaces.
   425 
   426 INPUT                  = mainpage.dox \
   427                          graphs.dox \
   428                          undir_graphs.dox \ 
   429                          named-param.dox \
   430                          maps.dox \
   431                          coding_style.dox \
   432                          groups.dox \
   433                          namespaces.dox \
   434 			 license.dox \
   435                          developpers_interface.dox \
   436                          ../src/lemon \
   437                          ../src/lemon/concept \
   438                          ../src/test/test_tools.h
   439 
   440 # If the value of the INPUT tag contains directories, you can use the 
   441 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
   442 # and *.h) to filter out the source-files in the directories. If left 
   443 # blank the following patterns are tested: 
   444 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp 
   445 # *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
   446 
   447 FILE_PATTERNS          = 
   448 
   449 # The RECURSIVE tag can be used to turn specify whether or not subdirectories 
   450 # should be searched for input files as well. Possible values are YES and NO. 
   451 # If left blank NO is used.
   452 
   453 RECURSIVE              = NO
   454 
   455 # The EXCLUDE tag can be used to specify files and/or directories that should 
   456 # excluded from the INPUT source files. This way you can easily exclude a 
   457 # subdirectory from a directory tree whose root is specified with the INPUT tag.
   458 
   459 EXCLUDE                = 
   460 
   461 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories 
   462 # that are symbolic links (a Unix filesystem feature) are excluded from the input.
   463 
   464 EXCLUDE_SYMLINKS       = NO
   465 
   466 # If the value of the INPUT tag contains directories, you can use the 
   467 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
   468 # certain files from those directories.
   469 
   470 EXCLUDE_PATTERNS       = 
   471 
   472 # The EXAMPLE_PATH tag can be used to specify one or more files or 
   473 # directories that contain example code fragments that are included (see 
   474 # the \include command).
   475 
   476 EXAMPLE_PATH           = ../src/demo ../LICENSE .
   477 
   478 # If the value of the EXAMPLE_PATH tag contains directories, you can use the 
   479 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
   480 # and *.h) to filter out the source-files in the directories. If left 
   481 # blank all files are included.
   482 
   483 EXAMPLE_PATTERNS       = 
   484 
   485 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
   486 # searched for input files to be used with the \include or \dontinclude 
   487 # commands irrespective of the value of the RECURSIVE tag. 
   488 # Possible values are YES and NO. If left blank NO is used.
   489 
   490 EXAMPLE_RECURSIVE      = NO
   491 
   492 # The IMAGE_PATH tag can be used to specify one or more files or 
   493 # directories that contain image that are included in the documentation (see 
   494 # the \image command).
   495 
   496 IMAGE_PATH             = 
   497 
   498 # The INPUT_FILTER tag can be used to specify a program that doxygen should 
   499 # invoke to filter for each input file. Doxygen will invoke the filter program 
   500 # by executing (via popen()) the command <filter> <input-file>, where <filter> 
   501 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
   502 # input file. Doxygen will then use the output that the filter program writes 
   503 # to standard output.  If FILTER_PATTERNS is specified, this tag will be 
   504 # ignored.
   505 
   506 INPUT_FILTER           = 
   507 
   508 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 
   509 # basis.  Doxygen will compare the file name with each pattern and apply the 
   510 # filter if there is a match.  The filters are a list of the form: 
   511 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 
   512 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
   513 # is applied to all files.
   514 
   515 FILTER_PATTERNS        = 
   516 
   517 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
   518 # INPUT_FILTER) will be used to filter the input files when producing source 
   519 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
   520 
   521 FILTER_SOURCE_FILES    = NO
   522 
   523 #---------------------------------------------------------------------------
   524 # configuration options related to source browsing
   525 #---------------------------------------------------------------------------
   526 
   527 # If the SOURCE_BROWSER tag is set to YES then a list of source files will 
   528 # be generated. Documented entities will be cross-referenced with these sources. 
   529 # Note: To get rid of all source code in the generated output, make sure also 
   530 # VERBATIM_HEADERS is set to NO.
   531 
   532 SOURCE_BROWSER         = YES
   533 
   534 # Setting the INLINE_SOURCES tag to YES will include the body 
   535 # of functions and classes directly in the documentation.
   536 
   537 INLINE_SOURCES         = NO
   538 
   539 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
   540 # doxygen to hide any special comment blocks from generated source code 
   541 # fragments. Normal C and C++ comments will always remain visible.
   542 
   543 STRIP_CODE_COMMENTS    = YES
   544 
   545 # If the REFERENCED_BY_RELATION tag is set to YES (the default) 
   546 # then for each documented function all documented 
   547 # functions referencing it will be listed.
   548 
   549 REFERENCED_BY_RELATION = NO
   550 
   551 # If the REFERENCES_RELATION tag is set to YES (the default) 
   552 # then for each documented function all documented entities 
   553 # called/used by that function will be listed.
   554 
   555 REFERENCES_RELATION    = NO
   556 
   557 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
   558 # will generate a verbatim copy of the header file for each class for 
   559 # which an include is specified. Set to NO to disable this.
   560 
   561 VERBATIM_HEADERS       = YES
   562 
   563 #---------------------------------------------------------------------------
   564 # configuration options related to the alphabetical class index
   565 #---------------------------------------------------------------------------
   566 
   567 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
   568 # of all compounds will be generated. Enable this if the project 
   569 # contains a lot of classes, structs, unions or interfaces.
   570 
   571 ALPHABETICAL_INDEX     = YES
   572 
   573 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
   574 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
   575 # in which this list will be split (can be a number in the range [1..20])
   576 
   577 COLS_IN_ALPHA_INDEX    = 2
   578 
   579 # In case all classes in a project start with a common prefix, all 
   580 # classes will be put under the same header in the alphabetical index. 
   581 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
   582 # should be ignored while generating the index headers.
   583 
   584 IGNORE_PREFIX          = 
   585 
   586 #---------------------------------------------------------------------------
   587 # configuration options related to the HTML output
   588 #---------------------------------------------------------------------------
   589 
   590 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
   591 # generate HTML output.
   592 
   593 GENERATE_HTML          = YES
   594 
   595 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
   596 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
   597 # put in front of it. If left blank `html' will be used as the default path.
   598 
   599 HTML_OUTPUT            = html
   600 
   601 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
   602 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
   603 # doxygen will generate files with .html extension.
   604 
   605 HTML_FILE_EXTENSION    = .html
   606 
   607 # The HTML_HEADER tag can be used to specify a personal HTML header for 
   608 # each generated HTML page. If it is left blank doxygen will generate a 
   609 # standard header.
   610 
   611 HTML_HEADER            = 
   612 
   613 # The HTML_FOOTER tag can be used to specify a personal HTML footer for 
   614 # each generated HTML page. If it is left blank doxygen will generate a 
   615 # standard footer.
   616 
   617 HTML_FOOTER            = 
   618 
   619 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
   620 # style sheet that is used by each HTML page. It can be used to 
   621 # fine-tune the look of the HTML output. If the tag is left blank doxygen 
   622 # will generate a default style sheet. Note that doxygen will try to copy 
   623 # the style sheet file to the HTML output directory, so don't put your own 
   624 # stylesheet in the HTML output directory as well, or it will be erased!
   625 
   626 HTML_STYLESHEET        = 
   627 
   628 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
   629 # files or namespaces will be aligned in HTML using tables. If set to 
   630 # NO a bullet list will be used.
   631 
   632 HTML_ALIGN_MEMBERS     = YES
   633 
   634 # If the GENERATE_HTMLHELP tag is set to YES, additional index files 
   635 # will be generated that can be used as input for tools like the 
   636 # Microsoft HTML help workshop to generate a compressed HTML help file (.chm) 
   637 # of the generated HTML documentation.
   638 
   639 GENERATE_HTMLHELP      = NO
   640 
   641 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
   642 # be used to specify the file name of the resulting .chm file. You 
   643 # can add a path in front of the file if the result should not be 
   644 # written to the html output directory.
   645 
   646 CHM_FILE               = 
   647 
   648 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 
   649 # be used to specify the location (absolute path including file name) of 
   650 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 
   651 # the HTML help compiler on the generated index.hhp.
   652 
   653 HHC_LOCATION           = 
   654 
   655 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
   656 # controls if a separate .chi index file is generated (YES) or that 
   657 # it should be included in the master .chm file (NO).
   658 
   659 GENERATE_CHI           = NO
   660 
   661 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
   662 # controls whether a binary table of contents is generated (YES) or a 
   663 # normal table of contents (NO) in the .chm file.
   664 
   665 BINARY_TOC             = NO
   666 
   667 # The TOC_EXPAND flag can be set to YES to add extra items for group members 
   668 # to the contents of the HTML help documentation and to the tree view.
   669 
   670 TOC_EXPAND             = NO
   671 
   672 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
   673 # top of each HTML page. The value NO (the default) enables the index and 
   674 # the value YES disables it.
   675 
   676 DISABLE_INDEX          = NO
   677 
   678 # This tag can be used to set the number of enum values (range [1..20]) 
   679 # that doxygen will group on one line in the generated HTML documentation.
   680 
   681 ENUM_VALUES_PER_LINE   = 4
   682 
   683 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
   684 # generated containing a tree-like index structure (just like the one that 
   685 # is generated for HTML Help). For this to work a browser that supports 
   686 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
   687 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
   688 # probably better off using the HTML help feature.
   689 
   690 GENERATE_TREEVIEW      = YES
   691 
   692 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
   693 # used to set the initial width (in pixels) of the frame in which the tree 
   694 # is shown.
   695 
   696 TREEVIEW_WIDTH         = 250
   697 
   698 #---------------------------------------------------------------------------
   699 # configuration options related to the LaTeX output
   700 #---------------------------------------------------------------------------
   701 
   702 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
   703 # generate Latex output.
   704 
   705 GENERATE_LATEX         = NO
   706 
   707 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
   708 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
   709 # put in front of it. If left blank `latex' will be used as the default path.
   710 
   711 LATEX_OUTPUT           = latex
   712 
   713 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 
   714 # invoked. If left blank `latex' will be used as the default command name.
   715 
   716 LATEX_CMD_NAME         = latex
   717 
   718 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
   719 # generate index for LaTeX. If left blank `makeindex' will be used as the 
   720 # default command name.
   721 
   722 MAKEINDEX_CMD_NAME     = makeindex
   723 
   724 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
   725 # LaTeX documents. This may be useful for small projects and may help to 
   726 # save some trees in general.
   727 
   728 COMPACT_LATEX          = YES
   729 
   730 # The PAPER_TYPE tag can be used to set the paper type that is used 
   731 # by the printer. Possible values are: a4, a4wide, letter, legal and 
   732 # executive. If left blank a4wide will be used.
   733 
   734 PAPER_TYPE             = a4wide
   735 
   736 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
   737 # packages that should be included in the LaTeX output.
   738 
   739 EXTRA_PACKAGES         = 
   740 
   741 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
   742 # the generated latex document. The header should contain everything until 
   743 # the first chapter. If it is left blank doxygen will generate a 
   744 # standard header. Notice: only use this tag if you know what you are doing!
   745 
   746 LATEX_HEADER           = 
   747 
   748 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
   749 # is prepared for conversion to pdf (using ps2pdf). The pdf file will 
   750 # contain links (just like the HTML output) instead of page references 
   751 # This makes the output suitable for online browsing using a pdf viewer.
   752 
   753 PDF_HYPERLINKS         = YES
   754 
   755 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
   756 # plain latex in the generated Makefile. Set this option to YES to get a 
   757 # higher quality PDF documentation.
   758 
   759 USE_PDFLATEX           = YES
   760 
   761 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
   762 # command to the generated LaTeX files. This will instruct LaTeX to keep 
   763 # running if errors occur, instead of asking the user for help. 
   764 # This option is also used when generating formulas in HTML.
   765 
   766 LATEX_BATCHMODE        = NO
   767 
   768 # If LATEX_HIDE_INDICES is set to YES then doxygen will not 
   769 # include the index chapters (such as File Index, Compound Index, etc.) 
   770 # in the output.
   771 
   772 LATEX_HIDE_INDICES     = NO
   773 
   774 #---------------------------------------------------------------------------
   775 # configuration options related to the RTF output
   776 #---------------------------------------------------------------------------
   777 
   778 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
   779 # The RTF output is optimized for Word 97 and may not look very pretty with 
   780 # other RTF readers or editors.
   781 
   782 GENERATE_RTF           = NO
   783 
   784 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
   785 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
   786 # put in front of it. If left blank `rtf' will be used as the default path.
   787 
   788 RTF_OUTPUT             = rtf
   789 
   790 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
   791 # RTF documents. This may be useful for small projects and may help to 
   792 # save some trees in general.
   793 
   794 COMPACT_RTF            = NO
   795 
   796 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
   797 # will contain hyperlink fields. The RTF file will 
   798 # contain links (just like the HTML output) instead of page references. 
   799 # This makes the output suitable for online browsing using WORD or other 
   800 # programs which support those fields. 
   801 # Note: wordpad (write) and others do not support links.
   802 
   803 RTF_HYPERLINKS         = NO
   804 
   805 # Load stylesheet definitions from file. Syntax is similar to doxygen's 
   806 # config file, i.e. a series of assignments. You only have to provide 
   807 # replacements, missing definitions are set to their default value.
   808 
   809 RTF_STYLESHEET_FILE    = 
   810 
   811 # Set optional variables used in the generation of an rtf document. 
   812 # Syntax is similar to doxygen's config file.
   813 
   814 RTF_EXTENSIONS_FILE    = 
   815 
   816 #---------------------------------------------------------------------------
   817 # configuration options related to the man page output
   818 #---------------------------------------------------------------------------
   819 
   820 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
   821 # generate man pages
   822 
   823 GENERATE_MAN           = NO
   824 
   825 # The MAN_OUTPUT tag is used to specify where the man pages will be put. 
   826 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
   827 # put in front of it. If left blank `man' will be used as the default path.
   828 
   829 MAN_OUTPUT             = man
   830 
   831 # The MAN_EXTENSION tag determines the extension that is added to 
   832 # the generated man pages (default is the subroutine's section .3)
   833 
   834 MAN_EXTENSION          = .3
   835 
   836 # If the MAN_LINKS tag is set to YES and Doxygen generates man output, 
   837 # then it will generate one additional man file for each entity 
   838 # documented in the real man page(s). These additional files 
   839 # only source the real man page, but without them the man command 
   840 # would be unable to find the correct page. The default is NO.
   841 
   842 MAN_LINKS              = NO
   843 
   844 #---------------------------------------------------------------------------
   845 # configuration options related to the XML output
   846 #---------------------------------------------------------------------------
   847 
   848 # If the GENERATE_XML tag is set to YES Doxygen will 
   849 # generate an XML file that captures the structure of 
   850 # the code including all documentation.
   851 
   852 GENERATE_XML           = NO
   853 
   854 # The XML_OUTPUT tag is used to specify where the XML pages will be put. 
   855 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
   856 # put in front of it. If left blank `xml' will be used as the default path.
   857 
   858 XML_OUTPUT             = xml
   859 
   860 # The XML_SCHEMA tag can be used to specify an XML schema, 
   861 # which can be used by a validating XML parser to check the 
   862 # syntax of the XML files.
   863 
   864 XML_SCHEMA             = 
   865 
   866 # The XML_DTD tag can be used to specify an XML DTD, 
   867 # which can be used by a validating XML parser to check the 
   868 # syntax of the XML files.
   869 
   870 XML_DTD                = 
   871 
   872 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will 
   873 # dump the program listings (including syntax highlighting 
   874 # and cross-referencing information) to the XML output. Note that 
   875 # enabling this will significantly increase the size of the XML output.
   876 
   877 XML_PROGRAMLISTING     = YES
   878 
   879 #---------------------------------------------------------------------------
   880 # configuration options for the AutoGen Definitions output
   881 #---------------------------------------------------------------------------
   882 
   883 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 
   884 # generate an AutoGen Definitions (see autogen.sf.net) file 
   885 # that captures the structure of the code including all 
   886 # documentation. Note that this feature is still experimental 
   887 # and incomplete at the moment.
   888 
   889 GENERATE_AUTOGEN_DEF   = NO
   890 
   891 #---------------------------------------------------------------------------
   892 # configuration options related to the Perl module output
   893 #---------------------------------------------------------------------------
   894 
   895 # If the GENERATE_PERLMOD tag is set to YES Doxygen will 
   896 # generate a Perl module file that captures the structure of 
   897 # the code including all documentation. Note that this 
   898 # feature is still experimental and incomplete at the 
   899 # moment.
   900 
   901 GENERATE_PERLMOD       = NO
   902 
   903 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate 
   904 # the necessary Makefile rules, Perl scripts and LaTeX code to be able 
   905 # to generate PDF and DVI output from the Perl module output.
   906 
   907 PERLMOD_LATEX          = NO
   908 
   909 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 
   910 # nicely formatted so it can be parsed by a human reader.  This is useful 
   911 # if you want to understand what is going on.  On the other hand, if this 
   912 # tag is set to NO the size of the Perl module output will be much smaller 
   913 # and Perl will parse it just the same.
   914 
   915 PERLMOD_PRETTY         = YES
   916 
   917 # The names of the make variables in the generated doxyrules.make file 
   918 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 
   919 # This is useful so different doxyrules.make files included by the same 
   920 # Makefile don't overwrite each other's variables.
   921 
   922 PERLMOD_MAKEVAR_PREFIX = 
   923 
   924 #---------------------------------------------------------------------------
   925 # Configuration options related to the preprocessor   
   926 #---------------------------------------------------------------------------
   927 
   928 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 
   929 # evaluate all C-preprocessor directives found in the sources and include 
   930 # files.
   931 
   932 ENABLE_PREPROCESSING   = YES
   933 
   934 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 
   935 # names in the source code. If set to NO (the default) only conditional 
   936 # compilation will be performed. Macro expansion can be done in a controlled 
   937 # way by setting EXPAND_ONLY_PREDEF to YES.
   938 
   939 MACRO_EXPANSION        = NO
   940 
   941 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 
   942 # then the macro expansion is limited to the macros specified with the 
   943 # PREDEFINED and EXPAND_AS_PREDEFINED tags.
   944 
   945 EXPAND_ONLY_PREDEF     = NO
   946 
   947 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 
   948 # in the INCLUDE_PATH (see below) will be search if a #include is found.
   949 
   950 SEARCH_INCLUDES        = YES
   951 
   952 # The INCLUDE_PATH tag can be used to specify one or more directories that 
   953 # contain include files that are not input files but should be processed by 
   954 # the preprocessor.
   955 
   956 INCLUDE_PATH           = 
   957 
   958 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
   959 # patterns (like *.h and *.hpp) to filter out the header-files in the 
   960 # directories. If left blank, the patterns specified with FILE_PATTERNS will 
   961 # be used.
   962 
   963 INCLUDE_FILE_PATTERNS  = 
   964 
   965 # The PREDEFINED tag can be used to specify one or more macro names that 
   966 # are defined before the preprocessor is started (similar to the -D option of 
   967 # gcc). The argument of the tag is a list of macros of the form: name 
   968 # or name=definition (no spaces). If the definition and the = are 
   969 # omitted =1 is assumed. To prevent a macro definition from being 
   970 # undefined via #undef or recursively expanded use the := operator 
   971 # instead of the = operator.
   972 
   973 PREDEFINED             = DOXYGEN
   974 
   975 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
   976 # this tag can be used to specify a list of macro names that should be expanded. 
   977 # The macro definition that is found in the sources will be used. 
   978 # Use the PREDEFINED tag if you want to use a different macro definition.
   979 
   980 EXPAND_AS_DEFINED      = 
   981 
   982 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 
   983 # doxygen's preprocessor will remove all function-like macros that are alone 
   984 # on a line, have an all uppercase name, and do not end with a semicolon. Such 
   985 # function macros are typically used for boiler-plate code, and will confuse the 
   986 # parser if not removed.
   987 
   988 SKIP_FUNCTION_MACROS   = YES
   989 
   990 #---------------------------------------------------------------------------
   991 # Configuration::additions related to external references   
   992 #---------------------------------------------------------------------------
   993 
   994 # The TAGFILES option can be used to specify one or more tagfiles. 
   995 # Optionally an initial location of the external documentation 
   996 # can be added for each tagfile. The format of a tag file without 
   997 # this location is as follows: 
   998 #   TAGFILES = file1 file2 ... 
   999 # Adding location for the tag files is done as follows: 
  1000 #   TAGFILES = file1=loc1 "file2 = loc2" ... 
  1001 # where "loc1" and "loc2" can be relative or absolute paths or 
  1002 # URLs. If a location is present for each tag, the installdox tool 
  1003 # does not have to be run to correct the links.
  1004 # Note that each tag file must have a unique name
  1005 # (where the name does NOT include the path)
  1006 # If a tag file is not located in the directory in which doxygen 
  1007 # is run, you must also specify the path to the tagfile here.
  1008 
  1009 TAGFILES               = 
  1010 
  1011 # When a file name is specified after GENERATE_TAGFILE, doxygen will create 
  1012 # a tag file that is based on the input files it reads.
  1013 
  1014 GENERATE_TAGFILE       = 
  1015 
  1016 # If the ALLEXTERNALS tag is set to YES all external classes will be listed 
  1017 # in the class index. If set to NO only the inherited external classes 
  1018 # will be listed.
  1019 
  1020 ALLEXTERNALS           = NO
  1021 
  1022 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 
  1023 # in the modules index. If set to NO, only the current project's groups will 
  1024 # be listed.
  1025 
  1026 EXTERNAL_GROUPS        = YES
  1027 
  1028 # The PERL_PATH should be the absolute path and name of the perl script 
  1029 # interpreter (i.e. the result of `which perl').
  1030 
  1031 PERL_PATH              = /usr/bin/perl
  1032 
  1033 #---------------------------------------------------------------------------
  1034 # Configuration options related to the dot tool   
  1035 #---------------------------------------------------------------------------
  1036 
  1037 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
  1038 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or 
  1039 # super classes. Setting the tag to NO turns the diagrams off. Note that this 
  1040 # option is superseded by the HAVE_DOT option below. This is only a fallback. It is 
  1041 # recommended to install and use dot, since it yields more powerful graphs.
  1042 
  1043 CLASS_DIAGRAMS         = YES
  1044 
  1045 # If set to YES, the inheritance and collaboration graphs will hide 
  1046 # inheritance and usage relations if the target is undocumented 
  1047 # or is not a class.
  1048 
  1049 HIDE_UNDOC_RELATIONS   = NO
  1050 
  1051 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
  1052 # available from the path. This tool is part of Graphviz, a graph visualization 
  1053 # toolkit from AT&T and Lucent Bell Labs. The other options in this section 
  1054 # have no effect if this option is set to NO (the default)
  1055 
  1056 HAVE_DOT               = YES
  1057 
  1058 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
  1059 # will generate a graph for each documented class showing the direct and 
  1060 # indirect inheritance relations. Setting this tag to YES will force the 
  1061 # the CLASS_DIAGRAMS tag to NO.
  1062 
  1063 CLASS_GRAPH            = YES
  1064 
  1065 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 
  1066 # will generate a graph for each documented class showing the direct and 
  1067 # indirect implementation dependencies (inheritance, containment, and 
  1068 # class references variables) of the class with other documented classes.
  1069 
  1070 COLLABORATION_GRAPH    = YES
  1071 
  1072 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and 
  1073 # collaboration diagrams in a style similar to the OMG's Unified Modeling 
  1074 # Language.
  1075 
  1076 UML_LOOK               = NO
  1077 
  1078 # If set to YES, the inheritance and collaboration graphs will show the 
  1079 # relations between templates and their instances.
  1080 
  1081 TEMPLATE_RELATIONS     = YES
  1082 
  1083 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 
  1084 # tags are set to YES then doxygen will generate a graph for each documented 
  1085 # file showing the direct and indirect include dependencies of the file with 
  1086 # other documented files.
  1087 
  1088 INCLUDE_GRAPH          = YES
  1089 
  1090 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 
  1091 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each 
  1092 # documented header file showing the documented files that directly or 
  1093 # indirectly include this file.
  1094 
  1095 INCLUDED_BY_GRAPH      = YES
  1096 
  1097 # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will 
  1098 # generate a call dependency graph for every global function or class method. 
  1099 # Note that enabling this option will significantly increase the time of a run. 
  1100 # So in most cases it will be better to enable call graphs for selected 
  1101 # functions only using the \callgraph command.
  1102 
  1103 CALL_GRAPH             = YES
  1104 
  1105 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 
  1106 # will graphical hierarchy of all classes instead of a textual one.
  1107 
  1108 GRAPHICAL_HIERARCHY    = YES
  1109 
  1110 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
  1111 # generated by dot. Possible values are png, jpg, or gif
  1112 # If left blank png will be used.
  1113 
  1114 DOT_IMAGE_FORMAT       = png
  1115 
  1116 # The tag DOT_PATH can be used to specify the path where the dot tool can be 
  1117 # found. If left blank, it is assumed the dot tool can be found on the path.
  1118 
  1119 DOT_PATH               = 
  1120 
  1121 # The DOTFILE_DIRS tag can be used to specify one or more directories that 
  1122 # contain dot files that are included in the documentation (see the 
  1123 # \dotfile command).
  1124 
  1125 DOTFILE_DIRS           = 
  1126 
  1127 # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width 
  1128 # (in pixels) of the graphs generated by dot. If a graph becomes larger than 
  1129 # this value, doxygen will try to truncate the graph, so that it fits within 
  1130 # the specified constraint. Beware that most browsers cannot cope with very 
  1131 # large images.
  1132 
  1133 MAX_DOT_GRAPH_WIDTH    = 1024
  1134 
  1135 # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height 
  1136 # (in pixels) of the graphs generated by dot. If a graph becomes larger than 
  1137 # this value, doxygen will try to truncate the graph, so that it fits within 
  1138 # the specified constraint. Beware that most browsers cannot cope with very 
  1139 # large images.
  1140 
  1141 MAX_DOT_GRAPH_HEIGHT   = 1024
  1142 
  1143 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
  1144 # graphs generated by dot. A depth value of 3 means that only nodes reachable 
  1145 # from the root by following a path via at most 3 edges will be shown. Nodes that 
  1146 # lay further from the root node will be omitted. Note that setting this option to 
  1147 # 1 or 2 may greatly reduce the computation time needed for large code bases. Also 
  1148 # note that a graph may be further truncated if the graph's image dimensions are 
  1149 # not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT). 
  1150 # If 0 is used for the depth value (the default), the graph is not depth-constrained.
  1151 
  1152 MAX_DOT_GRAPH_DEPTH    = 0
  1153 
  1154 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 
  1155 # generate a legend page explaining the meaning of the various boxes and 
  1156 # arrows in the dot generated graphs.
  1157 
  1158 GENERATE_LEGEND        = YES
  1159 
  1160 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 
  1161 # remove the intermediate dot files that are used to generate 
  1162 # the various graphs.
  1163 
  1164 DOT_CLEANUP            = YES
  1165 
  1166 #---------------------------------------------------------------------------
  1167 # Configuration::additions related to the search engine   
  1168 #---------------------------------------------------------------------------
  1169 
  1170 # The SEARCHENGINE tag specifies whether or not a search engine should be 
  1171 # used. If set to NO the values of all tags below this one will be ignored.
  1172 
  1173 SEARCHENGINE           = YES