Copy-Paste bug fix.
3 # This file describes the settings to be used by the documentation system
4 # doxygen (www.doxygen.org) for a project
6 # All text after a hash (#) is considered a comment and will be ignored
8 # TAG = value [value, ...]
9 # For lists items can also be appended using:
10 # TAG += value [value, ...]
11 # Values that contain spaces should be placed between quotes (" ")
13 #---------------------------------------------------------------------------
14 # Project related configuration options
15 #---------------------------------------------------------------------------
17 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
18 # by quotes) that should identify the project.
22 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
23 # This could be handy for archiving the generated documentation or
24 # if some version control system is used.
28 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
29 # base path where the generated documentation will be put.
30 # If a relative path is entered, it will be relative to the location
31 # where doxygen was started. If left blank the current directory will be used.
35 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
36 # 4096 sub-directories (in 2 levels) under the output directory of each output
37 # format and will distribute the generated files over these directories.
38 # Enabling this option can be useful when feeding doxygen a huge amount of source
39 # files, where putting all generated files in the same directory would otherwise
40 # cause performance problems for the file system.
44 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
45 # documentation generated by doxygen is written. Doxygen will use this
46 # information to generate all constant output in the proper language.
47 # The default language is English, other supported languages are:
48 # Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
49 # Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
50 # Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
51 # Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
52 # Swedish, and Ukrainian.
54 OUTPUT_LANGUAGE = English
56 # This tag can be used to specify the encoding used in the generated output.
57 # The encoding is not always determined by the language that is chosen,
58 # but also whether or not the output is meant for Windows or non-Windows users.
59 # In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
60 # forces the Windows encoding (this is the default for the Windows binary),
61 # whereas setting the tag to NO uses a Unix-style encoding (the default for
62 # all platforms other than Windows).
64 USE_WINDOWS_ENCODING = NO
66 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
67 # include brief member descriptions after the members that are listed in
68 # the file and class documentation (similar to JavaDoc).
69 # Set to NO to disable this.
71 BRIEF_MEMBER_DESC = YES
73 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
74 # the brief description of a member or function before the detailed description.
75 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
76 # brief descriptions will be completely suppressed.
80 # This tag implements a quasi-intelligent brief description abbreviator
81 # that is used to form the text in various listings. Each string
82 # in this list, if found as the leading text of the brief description, will be
83 # stripped from the text and the result after processing the whole list, is used
84 # as the annotated text. Otherwise, the brief description is used as-is. If left
85 # blank, the following values are used ("$name" is automatically replaced with the
86 # name of the entity): "The $name class" "The $name widget" "The $name file"
87 # "is" "provides" "specifies" "contains" "represents" "a" "an" "the"
91 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
92 # Doxygen will generate a detailed section even if there is only a brief
95 ALWAYS_DETAILED_SEC = NO
97 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited
98 # members of a class in the documentation of that class as if those members were
99 # ordinary class members. Constructors, destructors and assignment operators of
100 # the base classes will not be shown.
102 INLINE_INHERITED_MEMB = NO
104 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
105 # path before files name in the file list and in the header files. If set
106 # to NO the shortest path that makes the file name unique will be used.
108 FULL_PATH_NAMES = YES
110 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
111 # can be used to strip a user-defined part of the path. Stripping is
112 # only done if one of the specified strings matches the left-hand part of
113 # the path. The tag can be used to show relative paths in the file list.
114 # If left blank the directory from which doxygen is run is used as the
117 STRIP_FROM_PATH = ../src
119 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
120 # the path mentioned in the documentation of a class, which tells
121 # the reader which header file to include in order to use a class.
122 # If left blank only the name of the header file containing the class
123 # definition is used. Otherwise one should specify the include paths that
124 # are normally passed to the compiler using the -I flag.
126 STRIP_FROM_INC_PATH = ../src
128 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
129 # (but less readable) file names. This can be useful is your file systems
130 # doesn't support long names like on DOS, Mac, or CD-ROM.
134 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
135 # will interpret the first line (until the first dot) of a JavaDoc-style
136 # comment as the brief description. If set to NO, the JavaDoc
137 # comments will behave just like the Qt-style comments (thus requiring an
138 # explicit @brief command for a brief description.
140 JAVADOC_AUTOBRIEF = NO
142 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
143 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
144 # comments) as a brief description. This used to be the default behaviour.
145 # The new default is to treat a multi-line C++ comment block as a detailed
146 # description. Set this tag to YES if you prefer the old behaviour instead.
148 MULTILINE_CPP_IS_BRIEF = NO
150 # If the DETAILS_AT_TOP tag is set to YES then Doxygen
151 # will output the detailed description near the top, like JavaDoc.
152 # If set to NO, the detailed description appears after the member
157 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
158 # member inherits the documentation from any documented member that it
163 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
164 # tag is set to YES, then doxygen will reuse the documentation of the first
165 # member in the group (if any) for the other members of the group. By default
166 # all members of a group must be documented explicitly.
168 DISTRIBUTE_GROUP_DOC = NO
170 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
171 # Doxygen uses this value to replace tabs by spaces in code fragments.
175 # This tag can be used to specify a number of aliases that acts
176 # as commands in the documentation. An alias has the form "name=value".
177 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
178 # put the command \sideeffect (or @sideeffect) in the documentation, which
179 # will result in a user-defined paragraph with heading "Side Effects:".
180 # You can put \n's in the value part of an alias to insert newlines.
184 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
185 # only. Doxygen will then generate output that is more tailored for C.
186 # For instance, some of the names that are used will be different. The list
187 # of all members will be omitted, etc.
189 OPTIMIZE_OUTPUT_FOR_C = NO
191 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
192 # only. Doxygen will then generate output that is more tailored for Java.
193 # For instance, namespaces will be presented as packages, qualified scopes
194 # will look different, etc.
196 OPTIMIZE_OUTPUT_JAVA = NO
198 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
199 # the same type (for instance a group of public functions) to be put as a
200 # subgroup of that type (e.g. under the Public Functions section). Set it to
201 # NO to prevent subgrouping. Alternatively, this can be done per class using
202 # the \nosubgrouping command.
206 #---------------------------------------------------------------------------
207 # Build related configuration options
208 #---------------------------------------------------------------------------
210 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
211 # documentation are documented, even if no documentation was available.
212 # Private class members and static file members will be hidden unless
213 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
217 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
218 # will be included in the documentation.
222 # If the EXTRACT_STATIC tag is set to YES all static members of a file
223 # will be included in the documentation.
227 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
228 # defined locally in source files will be included in the documentation.
229 # If set to NO only classes defined in header files are included.
231 EXTRACT_LOCAL_CLASSES = YES
233 # This flag is only useful for Objective-C code. When set to YES local
234 # methods, which are defined in the implementation section but not in
235 # the interface are included in the documentation.
236 # If set to NO (the default) only methods in the interface are included.
238 EXTRACT_LOCAL_METHODS = NO
240 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
241 # undocumented members of documented classes, files or namespaces.
242 # If set to NO (the default) these members will be included in the
243 # various overviews, but no documentation section is generated.
244 # This option has no effect if EXTRACT_ALL is enabled.
246 HIDE_UNDOC_MEMBERS = YES
248 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
249 # undocumented classes that are normally visible in the class hierarchy.
250 # If set to NO (the default) these classes will be included in the various
251 # overviews. This option has no effect if EXTRACT_ALL is enabled.
253 HIDE_UNDOC_CLASSES = YES
255 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
256 # friend (class|struct|union) declarations.
257 # If set to NO (the default) these declarations will be included in the
260 HIDE_FRIEND_COMPOUNDS = NO
262 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
263 # documentation blocks found inside the body of a function.
264 # If set to NO (the default) these blocks will be appended to the
265 # function's detailed documentation block.
267 HIDE_IN_BODY_DOCS = NO
269 # The INTERNAL_DOCS tag determines if documentation
270 # that is typed after a \internal command is included. If the tag is set
271 # to NO (the default) then the documentation will be excluded.
272 # Set it to YES to include the internal documentation.
276 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
277 # file names in lower-case letters. If set to YES upper-case letters are also
278 # allowed. This is useful if you have classes or files whose names only differ
279 # in case and if your file system supports case sensitive file names. Windows
280 # and Mac users are advised to set this option to NO.
282 CASE_SENSE_NAMES = YES
284 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
285 # will show members with their full class and namespace scopes in the
286 # documentation. If set to YES the scope will be hidden.
288 HIDE_SCOPE_NAMES = YES
290 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
291 # will put a list of the files that are included by a file in the documentation
294 SHOW_INCLUDE_FILES = YES
296 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
297 # is inserted in the documentation for inline members.
301 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
302 # will sort the (detailed) documentation of file and class members
303 # alphabetically by member name. If set to NO the members will appear in
306 SORT_MEMBER_DOCS = NO
308 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
309 # brief documentation of file, namespace and class members alphabetically
310 # by member name. If set to NO (the default) the members will appear in
315 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
316 # sorted by fully-qualified names, including namespaces. If set to
317 # NO (the default), the class list will be sorted only by class name,
318 # not including the namespace part.
319 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
320 # Note: This option applies only to the class list, not to the
323 SORT_BY_SCOPE_NAME = NO
325 # The GENERATE_TODOLIST tag can be used to enable (YES) or
326 # disable (NO) the todo list. This list is created by putting \todo
327 # commands in the documentation.
329 GENERATE_TODOLIST = YES
331 # The GENERATE_TESTLIST tag can be used to enable (YES) or
332 # disable (NO) the test list. This list is created by putting \test
333 # commands in the documentation.
335 GENERATE_TESTLIST = YES
337 # The GENERATE_BUGLIST tag can be used to enable (YES) or
338 # disable (NO) the bug list. This list is created by putting \bug
339 # commands in the documentation.
341 GENERATE_BUGLIST = YES
343 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
344 # disable (NO) the deprecated list. This list is created by putting
345 # \deprecated commands in the documentation.
347 GENERATE_DEPRECATEDLIST= YES
349 # The ENABLED_SECTIONS tag can be used to enable conditional
350 # documentation sections, marked by \if sectionname ... \endif.
354 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
355 # the initial value of a variable or define consists of for it to appear in
356 # the documentation. If the initializer consists of more lines than specified
357 # here it will be hidden. Use a value of 0 to hide initializers completely.
358 # The appearance of the initializer of individual variables and defines in the
359 # documentation can be controlled using \showinitializer or \hideinitializer
360 # command in the documentation regardless of this setting.
362 MAX_INITIALIZER_LINES = 30
364 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
365 # at the bottom of the documentation of classes and structs. If set to YES the
366 # list will mention the files that were used to generate the documentation.
368 SHOW_USED_FILES = YES
370 # If the sources in your project are distributed over multiple directories
371 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
372 # in the documentation.
374 SHOW_DIRECTORIES = YES
376 #---------------------------------------------------------------------------
377 # configuration options related to warning and progress messages
378 #---------------------------------------------------------------------------
380 # The QUIET tag can be used to turn on/off the messages that are generated
381 # by doxygen. Possible values are YES and NO. If left blank NO is used.
385 # The WARNINGS tag can be used to turn on/off the warning messages that are
386 # generated by doxygen. Possible values are YES and NO. If left blank
391 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
392 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
393 # automatically be disabled.
395 WARN_IF_UNDOCUMENTED = YES
397 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
398 # potential errors in the documentation, such as not documenting some
399 # parameters in a documented function, or documenting parameters that
400 # don't exist or using markup commands wrongly.
402 WARN_IF_DOC_ERROR = YES
404 # The WARN_FORMAT tag determines the format of the warning messages that
405 # doxygen can produce. The string should contain the $file, $line, and $text
406 # tags, which will be replaced by the file and line number from which the
407 # warning originated and the warning text.
409 WARN_FORMAT = "$file:$line: $text"
411 # The WARN_LOGFILE tag can be used to specify a file to which warning
412 # and error messages should be written. If left blank the output is written
415 WARN_LOGFILE = doxygen.log
417 #---------------------------------------------------------------------------
418 # configuration options related to the input files
419 #---------------------------------------------------------------------------
421 # The INPUT tag can be used to specify the files and/or directories that contain
422 # documented source files. You may enter file names like "myfile.cpp" or
423 # directories like "/usr/src/myproject". Separate the files or directories
426 INPUT = mainpage.dox \
434 ../src/lemon/concept \
435 ../src/test/test_tools.h
437 # If the value of the INPUT tag contains directories, you can use the
438 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
439 # and *.h) to filter out the source-files in the directories. If left
440 # blank the following patterns are tested:
441 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp
442 # *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
446 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
447 # should be searched for input files as well. Possible values are YES and NO.
448 # If left blank NO is used.
452 # The EXCLUDE tag can be used to specify files and/or directories that should
453 # excluded from the INPUT source files. This way you can easily exclude a
454 # subdirectory from a directory tree whose root is specified with the INPUT tag.
458 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories
459 # that are symbolic links (a Unix filesystem feature) are excluded from the input.
461 EXCLUDE_SYMLINKS = NO
463 # If the value of the INPUT tag contains directories, you can use the
464 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
465 # certain files from those directories.
469 # The EXAMPLE_PATH tag can be used to specify one or more files or
470 # directories that contain example code fragments that are included (see
471 # the \include command).
473 EXAMPLE_PATH = ../src/demo
475 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
476 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
477 # and *.h) to filter out the source-files in the directories. If left
478 # blank all files are included.
482 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
483 # searched for input files to be used with the \include or \dontinclude
484 # commands irrespective of the value of the RECURSIVE tag.
485 # Possible values are YES and NO. If left blank NO is used.
487 EXAMPLE_RECURSIVE = NO
489 # The IMAGE_PATH tag can be used to specify one or more files or
490 # directories that contain image that are included in the documentation (see
491 # the \image command).
495 # The INPUT_FILTER tag can be used to specify a program that doxygen should
496 # invoke to filter for each input file. Doxygen will invoke the filter program
497 # by executing (via popen()) the command <filter> <input-file>, where <filter>
498 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
499 # input file. Doxygen will then use the output that the filter program writes
500 # to standard output. If FILTER_PATTERNS is specified, this tag will be
505 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
506 # basis. Doxygen will compare the file name with each pattern and apply the
507 # filter if there is a match. The filters are a list of the form:
508 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
509 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
510 # is applied to all files.
514 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
515 # INPUT_FILTER) will be used to filter the input files when producing source
516 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
518 FILTER_SOURCE_FILES = NO
520 #---------------------------------------------------------------------------
521 # configuration options related to source browsing
522 #---------------------------------------------------------------------------
524 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
525 # be generated. Documented entities will be cross-referenced with these sources.
526 # Note: To get rid of all source code in the generated output, make sure also
527 # VERBATIM_HEADERS is set to NO.
531 # Setting the INLINE_SOURCES tag to YES will include the body
532 # of functions and classes directly in the documentation.
536 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
537 # doxygen to hide any special comment blocks from generated source code
538 # fragments. Normal C and C++ comments will always remain visible.
540 STRIP_CODE_COMMENTS = YES
542 # If the REFERENCED_BY_RELATION tag is set to YES (the default)
543 # then for each documented function all documented
544 # functions referencing it will be listed.
546 REFERENCED_BY_RELATION = NO
548 # If the REFERENCES_RELATION tag is set to YES (the default)
549 # then for each documented function all documented entities
550 # called/used by that function will be listed.
552 REFERENCES_RELATION = NO
554 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
555 # will generate a verbatim copy of the header file for each class for
556 # which an include is specified. Set to NO to disable this.
558 VERBATIM_HEADERS = YES
560 #---------------------------------------------------------------------------
561 # configuration options related to the alphabetical class index
562 #---------------------------------------------------------------------------
564 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
565 # of all compounds will be generated. Enable this if the project
566 # contains a lot of classes, structs, unions or interfaces.
568 ALPHABETICAL_INDEX = YES
570 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
571 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
572 # in which this list will be split (can be a number in the range [1..20])
574 COLS_IN_ALPHA_INDEX = 2
576 # In case all classes in a project start with a common prefix, all
577 # classes will be put under the same header in the alphabetical index.
578 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
579 # should be ignored while generating the index headers.
583 #---------------------------------------------------------------------------
584 # configuration options related to the HTML output
585 #---------------------------------------------------------------------------
587 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
588 # generate HTML output.
592 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
593 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
594 # put in front of it. If left blank `html' will be used as the default path.
598 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
599 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
600 # doxygen will generate files with .html extension.
602 HTML_FILE_EXTENSION = .html
604 # The HTML_HEADER tag can be used to specify a personal HTML header for
605 # each generated HTML page. If it is left blank doxygen will generate a
610 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
611 # each generated HTML page. If it is left blank doxygen will generate a
616 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
617 # style sheet that is used by each HTML page. It can be used to
618 # fine-tune the look of the HTML output. If the tag is left blank doxygen
619 # will generate a default style sheet. Note that doxygen will try to copy
620 # the style sheet file to the HTML output directory, so don't put your own
621 # stylesheet in the HTML output directory as well, or it will be erased!
625 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
626 # files or namespaces will be aligned in HTML using tables. If set to
627 # NO a bullet list will be used.
629 HTML_ALIGN_MEMBERS = YES
631 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
632 # will be generated that can be used as input for tools like the
633 # Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
634 # of the generated HTML documentation.
636 GENERATE_HTMLHELP = NO
638 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
639 # be used to specify the file name of the resulting .chm file. You
640 # can add a path in front of the file if the result should not be
641 # written to the html output directory.
645 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
646 # be used to specify the location (absolute path including file name) of
647 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
648 # the HTML help compiler on the generated index.hhp.
652 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
653 # controls if a separate .chi index file is generated (YES) or that
654 # it should be included in the master .chm file (NO).
658 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
659 # controls whether a binary table of contents is generated (YES) or a
660 # normal table of contents (NO) in the .chm file.
664 # The TOC_EXPAND flag can be set to YES to add extra items for group members
665 # to the contents of the HTML help documentation and to the tree view.
669 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
670 # top of each HTML page. The value NO (the default) enables the index and
671 # the value YES disables it.
675 # This tag can be used to set the number of enum values (range [1..20])
676 # that doxygen will group on one line in the generated HTML documentation.
678 ENUM_VALUES_PER_LINE = 4
680 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
681 # generated containing a tree-like index structure (just like the one that
682 # is generated for HTML Help). For this to work a browser that supports
683 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
684 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
685 # probably better off using the HTML help feature.
687 GENERATE_TREEVIEW = YES
689 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
690 # used to set the initial width (in pixels) of the frame in which the tree
695 #---------------------------------------------------------------------------
696 # configuration options related to the LaTeX output
697 #---------------------------------------------------------------------------
699 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
700 # generate Latex output.
704 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
705 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
706 # put in front of it. If left blank `latex' will be used as the default path.
710 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
711 # invoked. If left blank `latex' will be used as the default command name.
713 LATEX_CMD_NAME = latex
715 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
716 # generate index for LaTeX. If left blank `makeindex' will be used as the
717 # default command name.
719 MAKEINDEX_CMD_NAME = makeindex
721 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
722 # LaTeX documents. This may be useful for small projects and may help to
723 # save some trees in general.
727 # The PAPER_TYPE tag can be used to set the paper type that is used
728 # by the printer. Possible values are: a4, a4wide, letter, legal and
729 # executive. If left blank a4wide will be used.
733 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
734 # packages that should be included in the LaTeX output.
738 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
739 # the generated latex document. The header should contain everything until
740 # the first chapter. If it is left blank doxygen will generate a
741 # standard header. Notice: only use this tag if you know what you are doing!
745 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
746 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
747 # contain links (just like the HTML output) instead of page references
748 # This makes the output suitable for online browsing using a pdf viewer.
752 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
753 # plain latex in the generated Makefile. Set this option to YES to get a
754 # higher quality PDF documentation.
758 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
759 # command to the generated LaTeX files. This will instruct LaTeX to keep
760 # running if errors occur, instead of asking the user for help.
761 # This option is also used when generating formulas in HTML.
765 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
766 # include the index chapters (such as File Index, Compound Index, etc.)
769 LATEX_HIDE_INDICES = NO
771 #---------------------------------------------------------------------------
772 # configuration options related to the RTF output
773 #---------------------------------------------------------------------------
775 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
776 # The RTF output is optimized for Word 97 and may not look very pretty with
777 # other RTF readers or editors.
781 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
782 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
783 # put in front of it. If left blank `rtf' will be used as the default path.
787 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
788 # RTF documents. This may be useful for small projects and may help to
789 # save some trees in general.
793 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
794 # will contain hyperlink fields. The RTF file will
795 # contain links (just like the HTML output) instead of page references.
796 # This makes the output suitable for online browsing using WORD or other
797 # programs which support those fields.
798 # Note: wordpad (write) and others do not support links.
802 # Load stylesheet definitions from file. Syntax is similar to doxygen's
803 # config file, i.e. a series of assignments. You only have to provide
804 # replacements, missing definitions are set to their default value.
806 RTF_STYLESHEET_FILE =
808 # Set optional variables used in the generation of an rtf document.
809 # Syntax is similar to doxygen's config file.
811 RTF_EXTENSIONS_FILE =
813 #---------------------------------------------------------------------------
814 # configuration options related to the man page output
815 #---------------------------------------------------------------------------
817 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
822 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
823 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
824 # put in front of it. If left blank `man' will be used as the default path.
828 # The MAN_EXTENSION tag determines the extension that is added to
829 # the generated man pages (default is the subroutine's section .3)
833 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
834 # then it will generate one additional man file for each entity
835 # documented in the real man page(s). These additional files
836 # only source the real man page, but without them the man command
837 # would be unable to find the correct page. The default is NO.
841 #---------------------------------------------------------------------------
842 # configuration options related to the XML output
843 #---------------------------------------------------------------------------
845 # If the GENERATE_XML tag is set to YES Doxygen will
846 # generate an XML file that captures the structure of
847 # the code including all documentation.
851 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
852 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
853 # put in front of it. If left blank `xml' will be used as the default path.
857 # The XML_SCHEMA tag can be used to specify an XML schema,
858 # which can be used by a validating XML parser to check the
859 # syntax of the XML files.
863 # The XML_DTD tag can be used to specify an XML DTD,
864 # which can be used by a validating XML parser to check the
865 # syntax of the XML files.
869 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
870 # dump the program listings (including syntax highlighting
871 # and cross-referencing information) to the XML output. Note that
872 # enabling this will significantly increase the size of the XML output.
874 XML_PROGRAMLISTING = YES
876 #---------------------------------------------------------------------------
877 # configuration options for the AutoGen Definitions output
878 #---------------------------------------------------------------------------
880 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
881 # generate an AutoGen Definitions (see autogen.sf.net) file
882 # that captures the structure of the code including all
883 # documentation. Note that this feature is still experimental
884 # and incomplete at the moment.
886 GENERATE_AUTOGEN_DEF = NO
888 #---------------------------------------------------------------------------
889 # configuration options related to the Perl module output
890 #---------------------------------------------------------------------------
892 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
893 # generate a Perl module file that captures the structure of
894 # the code including all documentation. Note that this
895 # feature is still experimental and incomplete at the
898 GENERATE_PERLMOD = NO
900 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
901 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
902 # to generate PDF and DVI output from the Perl module output.
906 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
907 # nicely formatted so it can be parsed by a human reader. This is useful
908 # if you want to understand what is going on. On the other hand, if this
909 # tag is set to NO the size of the Perl module output will be much smaller
910 # and Perl will parse it just the same.
914 # The names of the make variables in the generated doxyrules.make file
915 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
916 # This is useful so different doxyrules.make files included by the same
917 # Makefile don't overwrite each other's variables.
919 PERLMOD_MAKEVAR_PREFIX =
921 #---------------------------------------------------------------------------
922 # Configuration options related to the preprocessor
923 #---------------------------------------------------------------------------
925 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
926 # evaluate all C-preprocessor directives found in the sources and include
929 ENABLE_PREPROCESSING = YES
931 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
932 # names in the source code. If set to NO (the default) only conditional
933 # compilation will be performed. Macro expansion can be done in a controlled
934 # way by setting EXPAND_ONLY_PREDEF to YES.
938 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
939 # then the macro expansion is limited to the macros specified with the
940 # PREDEFINED and EXPAND_AS_PREDEFINED tags.
942 EXPAND_ONLY_PREDEF = NO
944 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
945 # in the INCLUDE_PATH (see below) will be search if a #include is found.
947 SEARCH_INCLUDES = YES
949 # The INCLUDE_PATH tag can be used to specify one or more directories that
950 # contain include files that are not input files but should be processed by
955 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
956 # patterns (like *.h and *.hpp) to filter out the header-files in the
957 # directories. If left blank, the patterns specified with FILE_PATTERNS will
960 INCLUDE_FILE_PATTERNS =
962 # The PREDEFINED tag can be used to specify one or more macro names that
963 # are defined before the preprocessor is started (similar to the -D option of
964 # gcc). The argument of the tag is a list of macros of the form: name
965 # or name=definition (no spaces). If the definition and the = are
966 # omitted =1 is assumed. To prevent a macro definition from being
967 # undefined via #undef or recursively expanded use the := operator
968 # instead of the = operator.
972 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
973 # this tag can be used to specify a list of macro names that should be expanded.
974 # The macro definition that is found in the sources will be used.
975 # Use the PREDEFINED tag if you want to use a different macro definition.
979 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
980 # doxygen's preprocessor will remove all function-like macros that are alone
981 # on a line, have an all uppercase name, and do not end with a semicolon. Such
982 # function macros are typically used for boiler-plate code, and will confuse the
983 # parser if not removed.
985 SKIP_FUNCTION_MACROS = YES
987 #---------------------------------------------------------------------------
988 # Configuration::additions related to external references
989 #---------------------------------------------------------------------------
991 # The TAGFILES option can be used to specify one or more tagfiles.
992 # Optionally an initial location of the external documentation
993 # can be added for each tagfile. The format of a tag file without
994 # this location is as follows:
995 # TAGFILES = file1 file2 ...
996 # Adding location for the tag files is done as follows:
997 # TAGFILES = file1=loc1 "file2 = loc2" ...
998 # where "loc1" and "loc2" can be relative or absolute paths or
999 # URLs. If a location is present for each tag, the installdox tool
1000 # does not have to be run to correct the links.
1001 # Note that each tag file must have a unique name
1002 # (where the name does NOT include the path)
1003 # If a tag file is not located in the directory in which doxygen
1004 # is run, you must also specify the path to the tagfile here.
1008 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
1009 # a tag file that is based on the input files it reads.
1013 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
1014 # in the class index. If set to NO only the inherited external classes
1019 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1020 # in the modules index. If set to NO, only the current project's groups will
1023 EXTERNAL_GROUPS = YES
1025 # The PERL_PATH should be the absolute path and name of the perl script
1026 # interpreter (i.e. the result of `which perl').
1028 PERL_PATH = /usr/bin/perl
1030 #---------------------------------------------------------------------------
1031 # Configuration options related to the dot tool
1032 #---------------------------------------------------------------------------
1034 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1035 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or
1036 # super classes. Setting the tag to NO turns the diagrams off. Note that this
1037 # option is superseded by the HAVE_DOT option below. This is only a fallback. It is
1038 # recommended to install and use dot, since it yields more powerful graphs.
1040 CLASS_DIAGRAMS = YES
1042 # If set to YES, the inheritance and collaboration graphs will hide
1043 # inheritance and usage relations if the target is undocumented
1044 # or is not a class.
1046 HIDE_UNDOC_RELATIONS = NO
1048 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1049 # available from the path. This tool is part of Graphviz, a graph visualization
1050 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
1051 # have no effect if this option is set to NO (the default)
1055 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1056 # will generate a graph for each documented class showing the direct and
1057 # indirect inheritance relations. Setting this tag to YES will force the
1058 # the CLASS_DIAGRAMS tag to NO.
1062 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1063 # will generate a graph for each documented class showing the direct and
1064 # indirect implementation dependencies (inheritance, containment, and
1065 # class references variables) of the class with other documented classes.
1067 COLLABORATION_GRAPH = YES
1069 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1070 # collaboration diagrams in a style similar to the OMG's Unified Modeling
1075 # If set to YES, the inheritance and collaboration graphs will show the
1076 # relations between templates and their instances.
1078 TEMPLATE_RELATIONS = YES
1080 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1081 # tags are set to YES then doxygen will generate a graph for each documented
1082 # file showing the direct and indirect include dependencies of the file with
1083 # other documented files.
1087 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1088 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1089 # documented header file showing the documented files that directly or
1090 # indirectly include this file.
1092 INCLUDED_BY_GRAPH = YES
1094 # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
1095 # generate a call dependency graph for every global function or class method.
1096 # Note that enabling this option will significantly increase the time of a run.
1097 # So in most cases it will be better to enable call graphs for selected
1098 # functions only using the \callgraph command.
1102 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1103 # will graphical hierarchy of all classes instead of a textual one.
1105 GRAPHICAL_HIERARCHY = YES
1107 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1108 # generated by dot. Possible values are png, jpg, or gif
1109 # If left blank png will be used.
1111 DOT_IMAGE_FORMAT = png
1113 # The tag DOT_PATH can be used to specify the path where the dot tool can be
1114 # found. If left blank, it is assumed the dot tool can be found on the path.
1118 # The DOTFILE_DIRS tag can be used to specify one or more directories that
1119 # contain dot files that are included in the documentation (see the
1120 # \dotfile command).
1124 # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
1125 # (in pixels) of the graphs generated by dot. If a graph becomes larger than
1126 # this value, doxygen will try to truncate the graph, so that it fits within
1127 # the specified constraint. Beware that most browsers cannot cope with very
1130 MAX_DOT_GRAPH_WIDTH = 1024
1132 # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
1133 # (in pixels) of the graphs generated by dot. If a graph becomes larger than
1134 # this value, doxygen will try to truncate the graph, so that it fits within
1135 # the specified constraint. Beware that most browsers cannot cope with very
1138 MAX_DOT_GRAPH_HEIGHT = 1024
1140 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1141 # graphs generated by dot. A depth value of 3 means that only nodes reachable
1142 # from the root by following a path via at most 3 edges will be shown. Nodes that
1143 # lay further from the root node will be omitted. Note that setting this option to
1144 # 1 or 2 may greatly reduce the computation time needed for large code bases. Also
1145 # note that a graph may be further truncated if the graph's image dimensions are
1146 # not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT).
1147 # If 0 is used for the depth value (the default), the graph is not depth-constrained.
1149 MAX_DOT_GRAPH_DEPTH = 0
1151 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1152 # generate a legend page explaining the meaning of the various boxes and
1153 # arrows in the dot generated graphs.
1155 GENERATE_LEGEND = YES
1157 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1158 # remove the intermediate dot files that are used to generate
1159 # the various graphs.
1163 #---------------------------------------------------------------------------
1164 # Configuration::additions related to the search engine
1165 #---------------------------------------------------------------------------
1167 # The SEARCHENGINE tag specifies whether or not a search engine should be
1168 # used. If set to NO the values of all tags below this one will be ignored.