alpar@242: # Doxyfile 1.3.6 alpar@242: alpar@242: # This file describes the settings to be used by the documentation system alpar@242: # doxygen (www.doxygen.org) for a project alpar@242: # alpar@242: # All text after a hash (#) is considered a comment and will be ignored alpar@242: # The format is: alpar@242: # TAG = value [value, ...] alpar@242: # For lists items can also be appended using: alpar@242: # TAG += value [value, ...] alpar@242: # Values that contain spaces should be placed between quotes (" ") alpar@186: alpar@186: #--------------------------------------------------------------------------- alpar@242: # Project related configuration options alpar@186: #--------------------------------------------------------------------------- alpar@242: alpar@242: # The PROJECT_NAME tag is a single word (or a sequence of words surrounded alpar@242: # by quotes) that should identify the project. alpar@242: alpar@248: PROJECT_NAME = HugoLib alpar@242: alpar@242: # The PROJECT_NUMBER tag can be used to enter a project or revision number. alpar@242: # This could be handy for archiving the generated documentation or alpar@242: # if some version control system is used. alpar@242: alpar@186: PROJECT_NUMBER = 0.1 alpar@242: alpar@242: # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) alpar@242: # base path where the generated documentation will be put. alpar@242: # If a relative path is entered, it will be relative to the location alpar@242: # where doxygen was started. If left blank the current directory will be used. alpar@242: alpar@186: OUTPUT_DIRECTORY = alpar@242: alpar@242: # The OUTPUT_LANGUAGE tag is used to specify the language in which all alpar@242: # documentation generated by doxygen is written. Doxygen will use this alpar@242: # information to generate all constant output in the proper language. alpar@242: # The default language is English, other supported languages are: alpar@242: # Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, alpar@242: # Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en alpar@242: # (Japanese with English messages), Korean, Korean-en, Norwegian, Polish, Portuguese, alpar@242: # Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. alpar@242: alpar@186: OUTPUT_LANGUAGE = English alpar@242: alpar@242: # This tag can be used to specify the encoding used in the generated output. alpar@242: # The encoding is not always determined by the language that is chosen, alpar@242: # but also whether or not the output is meant for Windows or non-Windows users. alpar@242: # In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES alpar@242: # forces the Windows encoding (this is the default for the Windows binary), alpar@242: # whereas setting the tag to NO uses a Unix-style encoding (the default for alpar@242: # all platforms other than Windows). alpar@242: alpar@186: USE_WINDOWS_ENCODING = NO alpar@242: alpar@242: # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will alpar@242: # include brief member descriptions after the members that are listed in alpar@242: # the file and class documentation (similar to JavaDoc). alpar@242: # Set to NO to disable this. alpar@242: alpar@242: BRIEF_MEMBER_DESC = YES alpar@242: alpar@242: # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend alpar@242: # the brief description of a member or function before the detailed description. alpar@242: # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the alpar@242: # brief descriptions will be completely suppressed. alpar@242: alpar@242: REPEAT_BRIEF = NO alpar@242: alpar@242: # This tag implements a quasi-intelligent brief description abbreviator alpar@242: # that is used to form the text in various listings. Each string alpar@242: # in this list, if found as the leading text of the brief description, will be alpar@242: # stripped from the text and the result after processing the whole list, is used alpar@242: # as the annotated text. Otherwise, the brief description is used as-is. If left alpar@242: # blank, the following values are used ("$name" is automatically replaced with the alpar@242: # name of the entity): "The $name class" "The $name widget" "The $name file" alpar@242: # "is" "provides" "specifies" "contains" "represents" "a" "an" "the" alpar@242: alpar@242: ABBREVIATE_BRIEF = alpar@242: alpar@242: # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then alpar@242: # Doxygen will generate a detailed section even if there is only a brief alpar@242: # description. alpar@242: alpar@242: ALWAYS_DETAILED_SEC = NO alpar@242: alpar@242: # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited alpar@242: # members of a class in the documentation of that class as if those members were alpar@242: # ordinary class members. Constructors, destructors and assignment operators of alpar@242: # the base classes will not be shown. alpar@242: alpar@242: INLINE_INHERITED_MEMB = NO alpar@242: alpar@242: # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full alpar@242: # path before files name in the file list and in the header files. If set alpar@242: # to NO the shortest path that makes the file name unique will be used. alpar@242: alpar@242: FULL_PATH_NAMES = NO alpar@242: alpar@242: # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag alpar@242: # can be used to strip a user-defined part of the path. Stripping is alpar@242: # only done if one of the specified strings matches the left-hand part of alpar@242: # the path. It is allowed to use relative paths in the argument list. alpar@242: # If left blank the directory from which doxygen is run is used as the alpar@242: # path to strip. alpar@242: alpar@242: STRIP_FROM_PATH = alpar@242: alpar@242: # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter alpar@242: # (but less readable) file names. This can be useful is your file systems alpar@242: # doesn't support long names like on DOS, Mac, or CD-ROM. alpar@242: alpar@242: SHORT_NAMES = NO alpar@242: alpar@242: # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen alpar@242: # will interpret the first line (until the first dot) of a JavaDoc-style alpar@242: # comment as the brief description. If set to NO, the JavaDoc alpar@242: # comments will behave just like the Qt-style comments (thus requiring an alpar@242: # explicit @brief command for a brief description. alpar@242: alpar@242: JAVADOC_AUTOBRIEF = NO alpar@242: alpar@242: # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen alpar@242: # treat a multi-line C++ special comment block (i.e. a block of //! or /// alpar@242: # comments) as a brief description. This used to be the default behaviour. alpar@242: # The new default is to treat a multi-line C++ comment block as a detailed alpar@242: # description. Set this tag to YES if you prefer the old behaviour instead. alpar@242: alpar@242: MULTILINE_CPP_IS_BRIEF = NO alpar@242: alpar@242: # If the DETAILS_AT_TOP tag is set to YES then Doxygen alpar@242: # will output the detailed description near the top, like JavaDoc. alpar@242: # If set to NO, the detailed description appears after the member alpar@242: # documentation. alpar@242: alpar@456: DETAILS_AT_TOP = YES alpar@242: alpar@242: # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented alpar@242: # member inherits the documentation from any documented member that it alpar@242: # re-implements. alpar@242: alpar@242: INHERIT_DOCS = NO alpar@242: alpar@242: # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC alpar@242: # tag is set to YES, then doxygen will reuse the documentation of the first alpar@242: # member in the group (if any) for the other members of the group. By default alpar@242: # all members of a group must be documented explicitly. alpar@242: alpar@242: DISTRIBUTE_GROUP_DOC = NO alpar@242: alpar@242: # The TAB_SIZE tag can be used to set the number of spaces in a tab. alpar@242: # Doxygen uses this value to replace tabs by spaces in code fragments. alpar@242: alpar@242: TAB_SIZE = 8 alpar@242: alpar@242: # This tag can be used to specify a number of aliases that acts alpar@242: # as commands in the documentation. An alias has the form "name=value". alpar@242: # For example adding "sideeffect=\par Side Effects:\n" will allow you to alpar@242: # put the command \sideeffect (or @sideeffect) in the documentation, which alpar@242: # will result in a user-defined paragraph with heading "Side Effects:". alpar@242: # You can put \n's in the value part of an alias to insert newlines. alpar@242: alpar@242: ALIASES = alpar@242: alpar@242: # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources alpar@242: # only. Doxygen will then generate output that is more tailored for C. alpar@242: # For instance, some of the names that are used will be different. The list alpar@242: # of all members will be omitted, etc. alpar@242: alpar@456: OPTIMIZE_OUTPUT_FOR_C = NO alpar@242: alpar@242: # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources alpar@242: # only. Doxygen will then generate output that is more tailored for Java. alpar@242: # For instance, namespaces will be presented as packages, qualified scopes alpar@242: # will look different, etc. alpar@242: alpar@242: OPTIMIZE_OUTPUT_JAVA = NO alpar@242: alpar@242: # Set the SUBGROUPING tag to YES (the default) to allow class member groups of alpar@242: # the same type (for instance a group of public functions) to be put as a alpar@242: # subgroup of that type (e.g. under the Public Functions section). Set it to alpar@242: # NO to prevent subgrouping. Alternatively, this can be done per class using alpar@242: # the \nosubgrouping command. alpar@242: alpar@242: SUBGROUPING = YES alpar@242: alpar@242: #--------------------------------------------------------------------------- alpar@242: # Build related configuration options alpar@242: #--------------------------------------------------------------------------- alpar@242: alpar@242: # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in alpar@242: # documentation are documented, even if no documentation was available. alpar@242: # Private class members and static file members will be hidden unless alpar@242: # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES alpar@242: alpar@186: EXTRACT_ALL = NO alpar@242: alpar@242: # If the EXTRACT_PRIVATE tag is set to YES all private members of a class alpar@242: # will be included in the documentation. alpar@242: alpar@186: EXTRACT_PRIVATE = NO alpar@242: alpar@242: # If the EXTRACT_STATIC tag is set to YES all static members of a file alpar@242: # will be included in the documentation. alpar@242: alpar@186: EXTRACT_STATIC = NO alpar@242: alpar@242: # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) alpar@242: # defined locally in source files will be included in the documentation. alpar@242: # If set to NO only classes defined in header files are included. alpar@242: alpar@186: EXTRACT_LOCAL_CLASSES = YES alpar@242: alpar@242: # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all alpar@242: # undocumented members of documented classes, files or namespaces. alpar@242: # If set to NO (the default) these members will be included in the alpar@242: # various overviews, but no documentation section is generated. alpar@242: # This option has no effect if EXTRACT_ALL is enabled. alpar@242: alpar@186: HIDE_UNDOC_MEMBERS = YES alpar@242: alpar@242: # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all alpar@242: # undocumented classes that are normally visible in the class hierarchy. alpar@242: # If set to NO (the default) these classes will be included in the various alpar@242: # overviews. This option has no effect if EXTRACT_ALL is enabled. alpar@242: alpar@186: HIDE_UNDOC_CLASSES = YES alpar@242: alpar@242: # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all alpar@242: # friend (class|struct|union) declarations. alpar@242: # If set to NO (the default) these declarations will be included in the alpar@242: # documentation. alpar@242: alpar@186: HIDE_FRIEND_COMPOUNDS = NO alpar@242: alpar@242: # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any alpar@242: # documentation blocks found inside the body of a function. alpar@242: # If set to NO (the default) these blocks will be appended to the alpar@242: # function's detailed documentation block. alpar@242: alpar@186: HIDE_IN_BODY_DOCS = NO alpar@242: alpar@242: # The INTERNAL_DOCS tag determines if documentation alpar@242: # that is typed after a \internal command is included. If the tag is set alpar@242: # to NO (the default) then the documentation will be excluded. alpar@242: # Set it to YES to include the internal documentation. alpar@242: alpar@186: INTERNAL_DOCS = NO alpar@242: alpar@242: # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate alpar@242: # file names in lower-case letters. If set to YES upper-case letters are also alpar@242: # allowed. This is useful if you have classes or files whose names only differ alpar@242: # in case and if your file system supports case sensitive file names. Windows alpar@242: # users are advised to set this option to NO. alpar@242: alpar@186: CASE_SENSE_NAMES = YES alpar@242: alpar@242: # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen alpar@242: # will show members with their full class and namespace scopes in the alpar@242: # documentation. If set to YES the scope will be hidden. alpar@242: alpar@186: HIDE_SCOPE_NAMES = YES alpar@242: alpar@242: # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen alpar@242: # will put a list of the files that are included by a file in the documentation alpar@242: # of that file. alpar@242: alpar@186: SHOW_INCLUDE_FILES = YES alpar@242: alpar@242: # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] alpar@242: # is inserted in the documentation for inline members. alpar@242: alpar@186: INLINE_INFO = YES alpar@242: alpar@242: # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen alpar@242: # will sort the (detailed) documentation of file and class members alpar@242: # alphabetically by member name. If set to NO the members will appear in alpar@242: # declaration order. alpar@242: alpar@186: SORT_MEMBER_DOCS = NO alpar@242: alpar@242: # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the alpar@242: # brief documentation of file, namespace and class members alphabetically alpar@242: # by member name. If set to NO (the default) the members will appear in alpar@242: # declaration order. alpar@242: alpar@242: SORT_BRIEF_DOCS = NO alpar@242: alpar@242: # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be alpar@242: # sorted by fully-qualified names, including namespaces. If set to alpar@242: # NO (the default), the class list will be sorted only by class name, alpar@242: # not including the namespace part. alpar@242: # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. alpar@242: # Note: This option applies only to the class list, not to the alpar@242: # alphabetical list. alpar@242: alpar@242: SORT_BY_SCOPE_NAME = NO alpar@242: alpar@242: # The GENERATE_TODOLIST tag can be used to enable (YES) or alpar@242: # disable (NO) the todo list. This list is created by putting \todo alpar@242: # commands in the documentation. alpar@242: alpar@186: GENERATE_TODOLIST = YES alpar@242: alpar@242: # The GENERATE_TESTLIST tag can be used to enable (YES) or alpar@242: # disable (NO) the test list. This list is created by putting \test alpar@242: # commands in the documentation. alpar@242: alpar@186: GENERATE_TESTLIST = YES alpar@242: alpar@242: # The GENERATE_BUGLIST tag can be used to enable (YES) or alpar@242: # disable (NO) the bug list. This list is created by putting \bug alpar@242: # commands in the documentation. alpar@242: alpar@186: GENERATE_BUGLIST = YES alpar@242: alpar@242: # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or alpar@242: # disable (NO) the deprecated list. This list is created by putting alpar@242: # \deprecated commands in the documentation. alpar@242: alpar@186: GENERATE_DEPRECATEDLIST= YES alpar@242: alpar@242: # The ENABLED_SECTIONS tag can be used to enable conditional alpar@242: # documentation sections, marked by \if sectionname ... \endif. alpar@242: alpar@186: ENABLED_SECTIONS = alpar@242: alpar@242: # The MAX_INITIALIZER_LINES tag determines the maximum number of lines alpar@242: # the initial value of a variable or define consists of for it to appear in alpar@242: # the documentation. If the initializer consists of more lines than specified alpar@242: # here it will be hidden. Use a value of 0 to hide initializers completely. alpar@242: # The appearance of the initializer of individual variables and defines in the alpar@242: # documentation can be controlled using \showinitializer or \hideinitializer alpar@242: # command in the documentation regardless of this setting. alpar@242: alpar@186: MAX_INITIALIZER_LINES = 30 alpar@242: alpar@242: # Set the SHOW_USED_FILES tag to NO to disable the list of files generated alpar@242: # at the bottom of the documentation of classes and structs. If set to YES the alpar@242: # list will mention the files that were used to generate the documentation. alpar@242: alpar@186: SHOW_USED_FILES = YES alpar@242: alpar@186: #--------------------------------------------------------------------------- alpar@186: # configuration options related to warning and progress messages alpar@186: #--------------------------------------------------------------------------- alpar@242: alpar@242: # The QUIET tag can be used to turn on/off the messages that are generated alpar@242: # by doxygen. Possible values are YES and NO. If left blank NO is used. alpar@242: alpar@186: QUIET = NO alpar@242: alpar@242: # The WARNINGS tag can be used to turn on/off the warning messages that are alpar@242: # generated by doxygen. Possible values are YES and NO. If left blank alpar@242: # NO is used. alpar@242: alpar@186: WARNINGS = YES alpar@242: alpar@242: # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings alpar@242: # for undocumented members. If EXTRACT_ALL is set to YES then this flag will alpar@242: # automatically be disabled. alpar@242: alpar@186: WARN_IF_UNDOCUMENTED = YES alpar@242: alpar@242: # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for alpar@242: # potential errors in the documentation, such as not documenting some alpar@242: # parameters in a documented function, or documenting parameters that alpar@242: # don't exist or using markup commands wrongly. alpar@242: alpar@186: WARN_IF_DOC_ERROR = YES alpar@242: alpar@242: # The WARN_FORMAT tag determines the format of the warning messages that alpar@242: # doxygen can produce. The string should contain the $file, $line, and $text alpar@242: # tags, which will be replaced by the file and line number from which the alpar@242: # warning originated and the warning text. alpar@242: alpar@186: WARN_FORMAT = "$file:$line: $text" alpar@242: alpar@242: # The WARN_LOGFILE tag can be used to specify a file to which warning alpar@242: # and error messages should be written. If left blank the output is written alpar@242: # to stderr. alpar@242: alpar@479: WARN_LOGFILE = doxygen.log alpar@242: alpar@186: #--------------------------------------------------------------------------- alpar@186: # configuration options related to the input files alpar@186: #--------------------------------------------------------------------------- alpar@242: alpar@242: # The INPUT tag can be used to specify the files and/or directories that contain alpar@242: # documented source files. You may enter file names like "myfile.cpp" or alpar@242: # directories like "/usr/src/myproject". Separate the files or directories alpar@242: # with spaces. alpar@242: alpar@479: INPUT = mainpage.dox \ alpar@479: maps.dox groups.dox \ alpar@406: ../src/include/skeletons/graph.h \ alpar@253: ../src/include/invalid.h \ alpar@253: ../src/include/smart_graph.h \ alpar@253: ../src/include/skeletons/maps.h \ alpar@255: ../src/include/dijkstra.h \ klao@274: ../src/include/bin_heap.h \ alpar@255: ../src/include/fib_heap.h \ marci@423: ../src/include/dimacs.h \ alpar@429: ../src/include/time_measure.h \ alpar@432: ../src/include/xy.h \ beckerjc@484: ../src/include/unionfind.h \ alpar@406: ../src/work/alpar/list_graph.h \ marci@319: ../src/work/athos/minlengthpaths.h \ alpar@434: ../src/work/klao/path.h \ marci@488: ../src/work/marci/graph_wrapper.h \ marci@488: ../src/work/jacint/max_flow.h alpar@242: alpar@242: # If the value of the INPUT tag contains directories, you can use the alpar@242: # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp alpar@242: # and *.h) to filter out the source-files in the directories. If left alpar@242: # blank the following patterns are tested: alpar@242: # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp alpar@242: # *.h++ *.idl *.odl *.cs *.php *.php3 *.inc alpar@242: alpar@186: FILE_PATTERNS = alpar@242: alpar@242: # The RECURSIVE tag can be used to turn specify whether or not subdirectories alpar@242: # should be searched for input files as well. Possible values are YES and NO. alpar@242: # If left blank NO is used. alpar@242: alpar@186: RECURSIVE = NO alpar@242: alpar@242: # The EXCLUDE tag can be used to specify files and/or directories that should alpar@242: # excluded from the INPUT source files. This way you can easily exclude a alpar@242: # subdirectory from a directory tree whose root is specified with the INPUT tag. alpar@242: alpar@186: EXCLUDE = alpar@242: alpar@242: # The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories alpar@242: # that are symbolic links (a Unix filesystem feature) are excluded from the input. alpar@242: alpar@186: EXCLUDE_SYMLINKS = NO alpar@242: alpar@242: # If the value of the INPUT tag contains directories, you can use the alpar@242: # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude alpar@242: # certain files from those directories. alpar@242: alpar@186: EXCLUDE_PATTERNS = alpar@242: alpar@242: # The EXAMPLE_PATH tag can be used to specify one or more files or alpar@242: # directories that contain example code fragments that are included (see alpar@242: # the \include command). alpar@242: alpar@186: EXAMPLE_PATH = examples alpar@242: alpar@242: # If the value of the EXAMPLE_PATH tag contains directories, you can use the alpar@242: # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp alpar@242: # and *.h) to filter out the source-files in the directories. If left alpar@242: # blank all files are included. alpar@242: alpar@186: EXAMPLE_PATTERNS = alpar@242: alpar@242: # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be alpar@242: # searched for input files to be used with the \include or \dontinclude alpar@242: # commands irrespective of the value of the RECURSIVE tag. alpar@242: # Possible values are YES and NO. If left blank NO is used. alpar@242: alpar@186: EXAMPLE_RECURSIVE = NO alpar@242: alpar@242: # The IMAGE_PATH tag can be used to specify one or more files or alpar@242: # directories that contain image that are included in the documentation (see alpar@242: # the \image command). alpar@242: alpar@186: IMAGE_PATH = alpar@242: alpar@242: # The INPUT_FILTER tag can be used to specify a program that doxygen should alpar@242: # invoke to filter for each input file. Doxygen will invoke the filter program alpar@242: # by executing (via popen()) the command , where alpar@242: # is the value of the INPUT_FILTER tag, and is the name of an alpar@242: # input file. Doxygen will then use the output that the filter program writes alpar@242: # to standard output. alpar@242: alpar@186: INPUT_FILTER = alpar@242: alpar@242: # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using alpar@242: # INPUT_FILTER) will be used to filter the input files when producing source alpar@242: # files to browse (i.e. when SOURCE_BROWSER is set to YES). alpar@242: alpar@186: FILTER_SOURCE_FILES = NO alpar@242: alpar@186: #--------------------------------------------------------------------------- alpar@186: # configuration options related to source browsing alpar@186: #--------------------------------------------------------------------------- alpar@242: alpar@242: # If the SOURCE_BROWSER tag is set to YES then a list of source files will alpar@242: # be generated. Documented entities will be cross-referenced with these sources. alpar@242: # Note: To get rid of all source code in the generated output, make sure also alpar@242: # VERBATIM_HEADERS is set to NO. alpar@242: alpar@186: SOURCE_BROWSER = YES alpar@242: alpar@242: # Setting the INLINE_SOURCES tag to YES will include the body alpar@242: # of functions and classes directly in the documentation. alpar@242: alpar@186: INLINE_SOURCES = NO alpar@242: alpar@242: # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct alpar@242: # doxygen to hide any special comment blocks from generated source code alpar@242: # fragments. Normal C and C++ comments will always remain visible. alpar@242: alpar@186: STRIP_CODE_COMMENTS = YES alpar@242: alpar@242: # If the REFERENCED_BY_RELATION tag is set to YES (the default) alpar@242: # then for each documented function all documented alpar@242: # functions referencing it will be listed. alpar@242: alpar@186: REFERENCED_BY_RELATION = YES alpar@242: alpar@242: # If the REFERENCES_RELATION tag is set to YES (the default) alpar@242: # then for each documented function all documented entities alpar@242: # called/used by that function will be listed. alpar@242: alpar@186: REFERENCES_RELATION = YES alpar@242: alpar@242: # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen alpar@242: # will generate a verbatim copy of the header file for each class for alpar@242: # which an include is specified. Set to NO to disable this. alpar@242: alpar@186: VERBATIM_HEADERS = YES alpar@242: alpar@186: #--------------------------------------------------------------------------- alpar@186: # configuration options related to the alphabetical class index alpar@186: #--------------------------------------------------------------------------- alpar@242: alpar@242: # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index alpar@242: # of all compounds will be generated. Enable this if the project alpar@242: # contains a lot of classes, structs, unions or interfaces. alpar@242: alpar@186: ALPHABETICAL_INDEX = YES alpar@242: alpar@242: # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then alpar@242: # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns alpar@242: # in which this list will be split (can be a number in the range [1..20]) alpar@242: alpar@186: COLS_IN_ALPHA_INDEX = 2 alpar@242: alpar@242: # In case all classes in a project start with a common prefix, all alpar@242: # classes will be put under the same header in the alphabetical index. alpar@242: # The IGNORE_PREFIX tag can be used to specify one or more prefixes that alpar@242: # should be ignored while generating the index headers. alpar@242: alpar@186: IGNORE_PREFIX = alpar@242: alpar@186: #--------------------------------------------------------------------------- alpar@186: # configuration options related to the HTML output alpar@186: #--------------------------------------------------------------------------- alpar@242: alpar@242: # If the GENERATE_HTML tag is set to YES (the default) Doxygen will alpar@242: # generate HTML output. alpar@242: alpar@186: GENERATE_HTML = YES alpar@242: alpar@242: # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. alpar@242: # If a relative path is entered the value of OUTPUT_DIRECTORY will be alpar@242: # put in front of it. If left blank `html' will be used as the default path. alpar@242: alpar@186: HTML_OUTPUT = html alpar@242: alpar@242: # The HTML_FILE_EXTENSION tag can be used to specify the file extension for alpar@242: # each generated HTML page (for example: .htm,.php,.asp). If it is left blank alpar@242: # doxygen will generate files with .html extension. alpar@242: alpar@186: HTML_FILE_EXTENSION = .html alpar@242: alpar@242: # The HTML_HEADER tag can be used to specify a personal HTML header for alpar@242: # each generated HTML page. If it is left blank doxygen will generate a alpar@242: # standard header. alpar@242: alpar@186: HTML_HEADER = alpar@242: alpar@242: # The HTML_FOOTER tag can be used to specify a personal HTML footer for alpar@242: # each generated HTML page. If it is left blank doxygen will generate a alpar@242: # standard footer. alpar@242: alpar@186: HTML_FOOTER = alpar@242: alpar@242: # The HTML_STYLESHEET tag can be used to specify a user-defined cascading alpar@242: # style sheet that is used by each HTML page. It can be used to alpar@242: # fine-tune the look of the HTML output. If the tag is left blank doxygen alpar@242: # will generate a default style sheet. Note that doxygen will try to copy alpar@242: # the style sheet file to the HTML output directory, so don't put your own alpar@242: # stylesheet in the HTML output directory as well, or it will be erased! alpar@242: alpar@186: HTML_STYLESHEET = alpar@242: alpar@242: # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, alpar@242: # files or namespaces will be aligned in HTML using tables. If set to alpar@242: # NO a bullet list will be used. alpar@242: alpar@186: HTML_ALIGN_MEMBERS = YES alpar@242: alpar@242: # If the GENERATE_HTMLHELP tag is set to YES, additional index files alpar@242: # will be generated that can be used as input for tools like the alpar@242: # Microsoft HTML help workshop to generate a compressed HTML help file (.chm) alpar@242: # of the generated HTML documentation. alpar@242: alpar@186: GENERATE_HTMLHELP = NO alpar@242: alpar@242: # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can alpar@242: # be used to specify the file name of the resulting .chm file. You alpar@242: # can add a path in front of the file if the result should not be alpar@242: # written to the html output directory. alpar@242: alpar@186: CHM_FILE = alpar@242: alpar@242: # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can alpar@242: # be used to specify the location (absolute path including file name) of alpar@242: # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run alpar@242: # the HTML help compiler on the generated index.hhp. alpar@242: alpar@186: HHC_LOCATION = alpar@242: alpar@242: # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag alpar@242: # controls if a separate .chi index file is generated (YES) or that alpar@242: # it should be included in the master .chm file (NO). alpar@242: alpar@186: GENERATE_CHI = NO alpar@242: alpar@242: # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag alpar@242: # controls whether a binary table of contents is generated (YES) or a alpar@242: # normal table of contents (NO) in the .chm file. alpar@242: alpar@186: BINARY_TOC = NO alpar@242: alpar@242: # The TOC_EXPAND flag can be set to YES to add extra items for group members alpar@242: # to the contents of the HTML help documentation and to the tree view. alpar@242: alpar@186: TOC_EXPAND = NO alpar@242: alpar@242: # The DISABLE_INDEX tag can be used to turn on/off the condensed index at alpar@242: # top of each HTML page. The value NO (the default) enables the index and alpar@242: # the value YES disables it. alpar@242: alpar@186: DISABLE_INDEX = NO alpar@242: alpar@242: # This tag can be used to set the number of enum values (range [1..20]) alpar@242: # that doxygen will group on one line in the generated HTML documentation. alpar@242: alpar@186: ENUM_VALUES_PER_LINE = 4 alpar@242: alpar@242: # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be alpar@242: # generated containing a tree-like index structure (just like the one that alpar@242: # is generated for HTML Help). For this to work a browser that supports alpar@242: # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, alpar@242: # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are alpar@242: # probably better off using the HTML help feature. alpar@242: alpar@186: GENERATE_TREEVIEW = YES alpar@242: alpar@242: # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be alpar@242: # used to set the initial width (in pixels) of the frame in which the tree alpar@242: # is shown. alpar@242: alpar@186: TREEVIEW_WIDTH = 250 alpar@242: alpar@186: #--------------------------------------------------------------------------- alpar@186: # configuration options related to the LaTeX output alpar@186: #--------------------------------------------------------------------------- alpar@242: alpar@242: # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will alpar@242: # generate Latex output. alpar@242: alpar@293: GENERATE_LATEX = NO alpar@242: alpar@242: # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. alpar@242: # If a relative path is entered the value of OUTPUT_DIRECTORY will be alpar@242: # put in front of it. If left blank `latex' will be used as the default path. alpar@242: alpar@186: LATEX_OUTPUT = latex alpar@242: alpar@242: # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be alpar@242: # invoked. If left blank `latex' will be used as the default command name. alpar@242: alpar@186: LATEX_CMD_NAME = latex alpar@242: alpar@242: # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to alpar@242: # generate index for LaTeX. If left blank `makeindex' will be used as the alpar@242: # default command name. alpar@242: alpar@186: MAKEINDEX_CMD_NAME = makeindex alpar@242: alpar@242: # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact alpar@242: # LaTeX documents. This may be useful for small projects and may help to alpar@242: # save some trees in general. alpar@242: alpar@186: COMPACT_LATEX = YES alpar@242: alpar@242: # The PAPER_TYPE tag can be used to set the paper type that is used alpar@242: # by the printer. Possible values are: a4, a4wide, letter, legal and alpar@242: # executive. If left blank a4wide will be used. alpar@242: alpar@186: PAPER_TYPE = a4wide alpar@242: alpar@242: # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX alpar@242: # packages that should be included in the LaTeX output. alpar@242: alpar@186: EXTRA_PACKAGES = alpar@242: alpar@242: # The LATEX_HEADER tag can be used to specify a personal LaTeX header for alpar@242: # the generated latex document. The header should contain everything until alpar@242: # the first chapter. If it is left blank doxygen will generate a alpar@242: # standard header. Notice: only use this tag if you know what you are doing! alpar@242: alpar@186: LATEX_HEADER = alpar@242: alpar@242: # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated alpar@242: # is prepared for conversion to pdf (using ps2pdf). The pdf file will alpar@242: # contain links (just like the HTML output) instead of page references alpar@242: # This makes the output suitable for online browsing using a pdf viewer. alpar@242: alpar@186: PDF_HYPERLINKS = YES alpar@242: alpar@242: # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of alpar@242: # plain latex in the generated Makefile. Set this option to YES to get a alpar@242: # higher quality PDF documentation. alpar@242: alpar@186: USE_PDFLATEX = YES alpar@242: alpar@242: # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. alpar@242: # command to the generated LaTeX files. This will instruct LaTeX to keep alpar@242: # running if errors occur, instead of asking the user for help. alpar@242: # This option is also used when generating formulas in HTML. alpar@242: alpar@186: LATEX_BATCHMODE = NO alpar@242: alpar@242: # If LATEX_HIDE_INDICES is set to YES then doxygen will not alpar@242: # include the index chapters (such as File Index, Compound Index, etc.) alpar@242: # in the output. alpar@242: alpar@186: LATEX_HIDE_INDICES = NO alpar@242: alpar@186: #--------------------------------------------------------------------------- alpar@186: # configuration options related to the RTF output alpar@186: #--------------------------------------------------------------------------- alpar@242: alpar@242: # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output alpar@242: # The RTF output is optimized for Word 97 and may not look very pretty with alpar@242: # other RTF readers or editors. alpar@242: alpar@186: GENERATE_RTF = NO alpar@242: alpar@242: # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. alpar@242: # If a relative path is entered the value of OUTPUT_DIRECTORY will be alpar@242: # put in front of it. If left blank `rtf' will be used as the default path. alpar@242: alpar@186: RTF_OUTPUT = rtf alpar@242: alpar@242: # If the COMPACT_RTF tag is set to YES Doxygen generates more compact alpar@242: # RTF documents. This may be useful for small projects and may help to alpar@242: # save some trees in general. alpar@242: alpar@186: COMPACT_RTF = NO alpar@242: alpar@242: # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated alpar@242: # will contain hyperlink fields. The RTF file will alpar@242: # contain links (just like the HTML output) instead of page references. alpar@242: # This makes the output suitable for online browsing using WORD or other alpar@242: # programs which support those fields. alpar@242: # Note: wordpad (write) and others do not support links. alpar@242: alpar@186: RTF_HYPERLINKS = NO alpar@242: alpar@242: # Load stylesheet definitions from file. Syntax is similar to doxygen's alpar@242: # config file, i.e. a series of assignments. You only have to provide alpar@242: # replacements, missing definitions are set to their default value. alpar@242: alpar@186: RTF_STYLESHEET_FILE = alpar@242: alpar@242: # Set optional variables used in the generation of an rtf document. alpar@242: # Syntax is similar to doxygen's config file. alpar@242: alpar@186: RTF_EXTENSIONS_FILE = alpar@242: alpar@186: #--------------------------------------------------------------------------- alpar@186: # configuration options related to the man page output alpar@186: #--------------------------------------------------------------------------- alpar@242: alpar@242: # If the GENERATE_MAN tag is set to YES (the default) Doxygen will alpar@242: # generate man pages alpar@242: alpar@186: GENERATE_MAN = NO alpar@242: alpar@242: # The MAN_OUTPUT tag is used to specify where the man pages will be put. alpar@242: # If a relative path is entered the value of OUTPUT_DIRECTORY will be alpar@242: # put in front of it. If left blank `man' will be used as the default path. alpar@242: alpar@186: MAN_OUTPUT = man alpar@242: alpar@242: # The MAN_EXTENSION tag determines the extension that is added to alpar@242: # the generated man pages (default is the subroutine's section .3) alpar@242: alpar@186: MAN_EXTENSION = .3 alpar@242: alpar@242: # If the MAN_LINKS tag is set to YES and Doxygen generates man output, alpar@242: # then it will generate one additional man file for each entity alpar@242: # documented in the real man page(s). These additional files alpar@242: # only source the real man page, but without them the man command alpar@242: # would be unable to find the correct page. The default is NO. alpar@242: alpar@186: MAN_LINKS = NO alpar@242: alpar@186: #--------------------------------------------------------------------------- alpar@186: # configuration options related to the XML output alpar@186: #--------------------------------------------------------------------------- alpar@242: alpar@242: # If the GENERATE_XML tag is set to YES Doxygen will alpar@242: # generate an XML file that captures the structure of alpar@242: # the code including all documentation. alpar@242: alpar@186: GENERATE_XML = NO alpar@242: alpar@242: # The XML_OUTPUT tag is used to specify where the XML pages will be put. alpar@242: # If a relative path is entered the value of OUTPUT_DIRECTORY will be alpar@242: # put in front of it. If left blank `xml' will be used as the default path. alpar@242: alpar@186: XML_OUTPUT = xml alpar@242: alpar@242: # The XML_SCHEMA tag can be used to specify an XML schema, alpar@242: # which can be used by a validating XML parser to check the alpar@242: # syntax of the XML files. alpar@242: alpar@186: XML_SCHEMA = alpar@242: alpar@242: # The XML_DTD tag can be used to specify an XML DTD, alpar@242: # which can be used by a validating XML parser to check the alpar@242: # syntax of the XML files. alpar@242: alpar@186: XML_DTD = alpar@242: alpar@242: # If the XML_PROGRAMLISTING tag is set to YES Doxygen will alpar@242: # dump the program listings (including syntax highlighting alpar@242: # and cross-referencing information) to the XML output. Note that alpar@242: # enabling this will significantly increase the size of the XML output. alpar@242: alpar@242: XML_PROGRAMLISTING = YES alpar@242: alpar@186: #--------------------------------------------------------------------------- alpar@186: # configuration options for the AutoGen Definitions output alpar@186: #--------------------------------------------------------------------------- alpar@242: alpar@242: # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will alpar@242: # generate an AutoGen Definitions (see autogen.sf.net) file alpar@242: # that captures the structure of the code including all alpar@242: # documentation. Note that this feature is still experimental alpar@242: # and incomplete at the moment. alpar@242: alpar@186: GENERATE_AUTOGEN_DEF = NO alpar@242: alpar@186: #--------------------------------------------------------------------------- alpar@186: # configuration options related to the Perl module output alpar@186: #--------------------------------------------------------------------------- alpar@242: alpar@242: # If the GENERATE_PERLMOD tag is set to YES Doxygen will alpar@242: # generate a Perl module file that captures the structure of alpar@242: # the code including all documentation. Note that this alpar@242: # feature is still experimental and incomplete at the alpar@242: # moment. alpar@242: alpar@186: GENERATE_PERLMOD = NO alpar@242: alpar@242: # If the PERLMOD_LATEX tag is set to YES Doxygen will generate alpar@242: # the necessary Makefile rules, Perl scripts and LaTeX code to be able alpar@242: # to generate PDF and DVI output from the Perl module output. alpar@242: alpar@186: PERLMOD_LATEX = NO alpar@242: alpar@242: # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be alpar@242: # nicely formatted so it can be parsed by a human reader. This is useful alpar@242: # if you want to understand what is going on. On the other hand, if this alpar@242: # tag is set to NO the size of the Perl module output will be much smaller alpar@242: # and Perl will parse it just the same. alpar@242: alpar@186: PERLMOD_PRETTY = YES alpar@242: alpar@242: # The names of the make variables in the generated doxyrules.make file alpar@242: # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. alpar@242: # This is useful so different doxyrules.make files included by the same alpar@242: # Makefile don't overwrite each other's variables. alpar@242: alpar@186: PERLMOD_MAKEVAR_PREFIX = alpar@242: alpar@186: #--------------------------------------------------------------------------- alpar@186: # Configuration options related to the preprocessor alpar@186: #--------------------------------------------------------------------------- alpar@242: alpar@242: # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will alpar@242: # evaluate all C-preprocessor directives found in the sources and include alpar@242: # files. alpar@242: alpar@186: ENABLE_PREPROCESSING = YES alpar@242: alpar@242: # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro alpar@242: # names in the source code. If set to NO (the default) only conditional alpar@242: # compilation will be performed. Macro expansion can be done in a controlled alpar@242: # way by setting EXPAND_ONLY_PREDEF to YES. alpar@242: alpar@186: MACRO_EXPANSION = NO alpar@242: alpar@242: # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES alpar@242: # then the macro expansion is limited to the macros specified with the alpar@242: # PREDEFINED and EXPAND_AS_PREDEFINED tags. alpar@242: alpar@186: EXPAND_ONLY_PREDEF = NO alpar@242: alpar@242: # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files alpar@242: # in the INCLUDE_PATH (see below) will be search if a #include is found. alpar@242: alpar@186: SEARCH_INCLUDES = YES alpar@242: alpar@242: # The INCLUDE_PATH tag can be used to specify one or more directories that alpar@242: # contain include files that are not input files but should be processed by alpar@242: # the preprocessor. alpar@242: alpar@186: INCLUDE_PATH = alpar@242: alpar@242: # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard alpar@242: # patterns (like *.h and *.hpp) to filter out the header-files in the alpar@242: # directories. If left blank, the patterns specified with FILE_PATTERNS will alpar@242: # be used. alpar@242: alpar@186: INCLUDE_FILE_PATTERNS = alpar@242: alpar@242: # The PREDEFINED tag can be used to specify one or more macro names that alpar@242: # are defined before the preprocessor is started (similar to the -D option of alpar@242: # gcc). The argument of the tag is a list of macros of the form: name alpar@242: # or name=definition (no spaces). If the definition and the = are alpar@242: # omitted =1 is assumed. alpar@242: alpar@186: PREDEFINED = DOXYGEN alpar@242: alpar@242: # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then alpar@242: # this tag can be used to specify a list of macro names that should be expanded. alpar@242: # The macro definition that is found in the sources will be used. alpar@242: # Use the PREDEFINED tag if you want to use a different macro definition. alpar@242: alpar@186: EXPAND_AS_DEFINED = alpar@242: alpar@242: # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then alpar@242: # doxygen's preprocessor will remove all function-like macros that are alone alpar@242: # on a line, have an all uppercase name, and do not end with a semicolon. Such alpar@242: # function macros are typically used for boiler-plate code, and will confuse the alpar@242: # parser if not removed. alpar@242: alpar@186: SKIP_FUNCTION_MACROS = YES alpar@242: alpar@186: #--------------------------------------------------------------------------- alpar@242: # Configuration::additions related to external references alpar@186: #--------------------------------------------------------------------------- alpar@242: alpar@242: # The TAGFILES option can be used to specify one or more tagfiles. alpar@242: # Optionally an initial location of the external documentation alpar@242: # can be added for each tagfile. The format of a tag file without alpar@242: # this location is as follows: alpar@242: # TAGFILES = file1 file2 ... alpar@242: # Adding location for the tag files is done as follows: alpar@242: # TAGFILES = file1=loc1 "file2 = loc2" ... alpar@242: # where "loc1" and "loc2" can be relative or absolute paths or alpar@242: # URLs. If a location is present for each tag, the installdox tool alpar@242: # does not have to be run to correct the links. alpar@242: # Note that each tag file must have a unique name alpar@242: # (where the name does NOT include the path) alpar@242: # If a tag file is not located in the directory in which doxygen alpar@242: # is run, you must also specify the path to the tagfile here. alpar@242: alpar@186: TAGFILES = alpar@242: alpar@242: # When a file name is specified after GENERATE_TAGFILE, doxygen will create alpar@242: # a tag file that is based on the input files it reads. alpar@242: alpar@186: GENERATE_TAGFILE = alpar@242: alpar@242: # If the ALLEXTERNALS tag is set to YES all external classes will be listed alpar@242: # in the class index. If set to NO only the inherited external classes alpar@242: # will be listed. alpar@242: alpar@186: ALLEXTERNALS = NO alpar@242: alpar@242: # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed alpar@242: # in the modules index. If set to NO, only the current project's groups will alpar@242: # be listed. alpar@242: alpar@186: EXTERNAL_GROUPS = YES alpar@242: alpar@242: # The PERL_PATH should be the absolute path and name of the perl script alpar@242: # interpreter (i.e. the result of `which perl'). alpar@242: alpar@186: PERL_PATH = /usr/bin/perl alpar@242: alpar@186: #--------------------------------------------------------------------------- alpar@186: # Configuration options related to the dot tool alpar@186: #--------------------------------------------------------------------------- alpar@242: alpar@242: # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will alpar@242: # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or alpar@242: # super classes. Setting the tag to NO turns the diagrams off. Note that this alpar@242: # option is superseded by the HAVE_DOT option below. This is only a fallback. It is alpar@242: # recommended to install and use dot, since it yields more powerful graphs. alpar@242: alpar@186: CLASS_DIAGRAMS = YES alpar@242: alpar@242: # If set to YES, the inheritance and collaboration graphs will hide alpar@242: # inheritance and usage relations if the target is undocumented alpar@242: # or is not a class. alpar@242: alpar@186: HIDE_UNDOC_RELATIONS = NO alpar@242: alpar@242: # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is alpar@242: # available from the path. This tool is part of Graphviz, a graph visualization alpar@242: # toolkit from AT&T and Lucent Bell Labs. The other options in this section alpar@242: # have no effect if this option is set to NO (the default) alpar@242: alpar@186: HAVE_DOT = YES alpar@242: alpar@242: # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen alpar@242: # will generate a graph for each documented class showing the direct and alpar@242: # indirect inheritance relations. Setting this tag to YES will force the alpar@242: # the CLASS_DIAGRAMS tag to NO. alpar@242: alpar@186: CLASS_GRAPH = YES alpar@242: alpar@242: # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen alpar@242: # will generate a graph for each documented class showing the direct and alpar@242: # indirect implementation dependencies (inheritance, containment, and alpar@242: # class references variables) of the class with other documented classes. alpar@242: alpar@186: COLLABORATION_GRAPH = YES alpar@242: alpar@242: # If the UML_LOOK tag is set to YES doxygen will generate inheritance and alpar@242: # collaboration diagrams in a style similar to the OMG's Unified Modeling alpar@242: # Language. alpar@242: alpar@186: UML_LOOK = NO alpar@242: alpar@242: # If set to YES, the inheritance and collaboration graphs will show the alpar@242: # relations between templates and their instances. alpar@242: alpar@186: TEMPLATE_RELATIONS = YES alpar@242: alpar@242: # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT alpar@242: # tags are set to YES then doxygen will generate a graph for each documented alpar@242: # file showing the direct and indirect include dependencies of the file with alpar@242: # other documented files. alpar@242: alpar@186: INCLUDE_GRAPH = YES alpar@242: alpar@242: # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and alpar@242: # HAVE_DOT tags are set to YES then doxygen will generate a graph for each alpar@242: # documented header file showing the documented files that directly or alpar@242: # indirectly include this file. alpar@242: alpar@186: INCLUDED_BY_GRAPH = YES alpar@242: alpar@242: # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will alpar@242: # generate a call dependency graph for every global function or class method. alpar@242: # Note that enabling this option will significantly increase the time of a run. alpar@242: # So in most cases it will be better to enable call graphs for selected alpar@242: # functions only using the \callgraph command. alpar@242: alpar@186: CALL_GRAPH = YES alpar@242: alpar@242: # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen alpar@242: # will graphical hierarchy of all classes instead of a textual one. alpar@242: alpar@186: GRAPHICAL_HIERARCHY = YES alpar@242: alpar@242: # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images alpar@242: # generated by dot. Possible values are png, jpg, or gif alpar@242: # If left blank png will be used. alpar@242: alpar@186: DOT_IMAGE_FORMAT = png alpar@242: alpar@242: # The tag DOT_PATH can be used to specify the path where the dot tool can be alpar@242: # found. If left blank, it is assumed the dot tool can be found on the path. alpar@242: alpar@186: DOT_PATH = alpar@242: alpar@242: # The DOTFILE_DIRS tag can be used to specify one or more directories that alpar@242: # contain dot files that are included in the documentation (see the alpar@242: # \dotfile command). alpar@242: alpar@186: DOTFILE_DIRS = alpar@242: alpar@242: # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width alpar@242: # (in pixels) of the graphs generated by dot. If a graph becomes larger than alpar@242: # this value, doxygen will try to truncate the graph, so that it fits within alpar@242: # the specified constraint. Beware that most browsers cannot cope with very alpar@242: # large images. alpar@242: alpar@186: MAX_DOT_GRAPH_WIDTH = 1024 alpar@242: alpar@242: # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height alpar@242: # (in pixels) of the graphs generated by dot. If a graph becomes larger than alpar@242: # this value, doxygen will try to truncate the graph, so that it fits within alpar@242: # the specified constraint. Beware that most browsers cannot cope with very alpar@242: # large images. alpar@242: alpar@186: MAX_DOT_GRAPH_HEIGHT = 1024 alpar@242: alpar@242: # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the alpar@242: # graphs generated by dot. A depth value of 3 means that only nodes reachable alpar@242: # from the root by following a path via at most 3 edges will be shown. Nodes that alpar@242: # lay further from the root node will be omitted. Note that setting this option to alpar@242: # 1 or 2 may greatly reduce the computation time needed for large code bases. Also alpar@242: # note that a graph may be further truncated if the graph's image dimensions are alpar@242: # not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT). alpar@242: # If 0 is used for the depth value (the default), the graph is not depth-constrained. alpar@242: alpar@186: MAX_DOT_GRAPH_DEPTH = 0 alpar@242: alpar@242: # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will alpar@242: # generate a legend page explaining the meaning of the various boxes and alpar@242: # arrows in the dot generated graphs. alpar@242: alpar@186: GENERATE_LEGEND = YES alpar@242: alpar@242: # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will alpar@242: # remove the intermediate dot files that are used to generate alpar@242: # the various graphs. alpar@242: alpar@186: DOT_CLEANUP = YES alpar@242: alpar@186: #--------------------------------------------------------------------------- alpar@242: # Configuration::additions related to the search engine alpar@186: #--------------------------------------------------------------------------- alpar@242: alpar@242: # The SEARCHENGINE tag specifies whether or not a search engine should be alpar@242: # used. If set to NO the values of all tags below this one will be ignored. alpar@242: alpar@186: SEARCHENGINE = YES