1.1 --- a/.hgignore Thu Apr 24 13:53:09 2008 +0100
1.2 +++ b/.hgignore Mon Apr 28 11:12:33 2008 +0100
1.3 @@ -7,6 +7,7 @@
1.4 *.log
1.5 *.lo
1.6 *.tar.*
1.7 +*.bak
1.8 Makefile.in
1.9 aclocal.m4
1.10 config.h.in
1.11 @@ -25,6 +26,7 @@
1.12 .libs/*
1.13 .deps/*
1.14 demo/*.eps
1.15 +doc/images/*.png
1.16
1.17 syntax: regexp
1.18 (.*/)?\#[^/]*\#$
2.1 --- a/configure.ac Thu Apr 24 13:53:09 2008 +0100
2.2 +++ b/configure.ac Mon Apr 28 11:12:33 2008 +0100
2.3 @@ -27,6 +27,7 @@
2.4 AC_PROG_LIBTOOL
2.5
2.6 AC_CHECK_PROG([doxygen_found],[doxygen],[yes],[no])
2.7 +AC_CHECK_PROG([gs_found],[gs],[yes],[no])
2.8
2.9 if test x"$lx_cmdline_cxxflags_set" != x"set" -a "$GXX" = yes; then
2.10 CXXFLAGS="$CXXFLAGS -Wall -W -Wall -W -Wunused -Wformat=2 -Wctor-dtor-privacy -Wnon-virtual-dtor -Wno-char-subscripts -Wwrite-strings -Wno-char-subscripts -Wreturn-type -Wcast-qual -Wcast-align -Wsign-promo -Woverloaded-virtual -Woverloaded-virtual -ansi -fno-strict-aliasing -Wold-style-cast -Wno-unknown-pragmas"
3.1 --- a/doc/Doxyfile.in Thu Apr 24 13:53:09 2008 +0100
3.2 +++ b/doc/Doxyfile.in Mon Apr 28 11:12:33 2008 +0100
3.3 @@ -1,455 +1,85 @@
3.4 -# Doxyfile 1.4.2
3.5 -
3.6 -# This file describes the settings to be used by the documentation system
3.7 -# doxygen (www.doxygen.org) for a project
3.8 -#
3.9 -# All text after a hash (#) is considered a comment and will be ignored
3.10 -# The format is:
3.11 -# TAG = value [value, ...]
3.12 -# For lists items can also be appended using:
3.13 -# TAG += value [value, ...]
3.14 -# Values that contain spaces should be placed between quotes (" ")
3.15 +# Doxyfile 1.5.5
3.16
3.17 #---------------------------------------------------------------------------
3.18 # Project related configuration options
3.19 #---------------------------------------------------------------------------
3.20 -
3.21 -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
3.22 -# by quotes) that should identify the project.
3.23 -
3.24 +DOXYFILE_ENCODING = UTF-8
3.25 PROJECT_NAME = @PACKAGE_NAME@
3.26 -
3.27 -# The PROJECT_NUMBER tag can be used to enter a project or revision number.
3.28 -# This could be handy for archiving the generated documentation or
3.29 -# if some version control system is used.
3.30 -
3.31 PROJECT_NUMBER = @PACKAGE_VERSION@
3.32 -
3.33 -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
3.34 -# base path where the generated documentation will be put.
3.35 -# If a relative path is entered, it will be relative to the location
3.36 -# where doxygen was started. If left blank the current directory will be used.
3.37 -
3.38 OUTPUT_DIRECTORY =
3.39 -
3.40 -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
3.41 -# 4096 sub-directories (in 2 levels) under the output directory of each output
3.42 -# format and will distribute the generated files over these directories.
3.43 -# Enabling this option can be useful when feeding doxygen a huge amount of
3.44 -# source files, where putting all generated files in the same directory would
3.45 -# otherwise cause performance problems for the file system.
3.46 -
3.47 CREATE_SUBDIRS = NO
3.48 -
3.49 -# The OUTPUT_LANGUAGE tag is used to specify the language in which all
3.50 -# documentation generated by doxygen is written. Doxygen will use this
3.51 -# information to generate all constant output in the proper language.
3.52 -# The default language is English, other supported languages are:
3.53 -# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
3.54 -# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
3.55 -# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
3.56 -# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
3.57 -# Swedish, and Ukrainian.
3.58 -
3.59 OUTPUT_LANGUAGE = English
3.60 -
3.61 -# This tag can be used to specify the encoding used in the generated output.
3.62 -# The encoding is not always determined by the language that is chosen,
3.63 -# but also whether or not the output is meant for Windows or non-Windows users.
3.64 -# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
3.65 -# forces the Windows encoding (this is the default for the Windows binary),
3.66 -# whereas setting the tag to NO uses a Unix-style encoding (the default for
3.67 -# all platforms other than Windows).
3.68 -
3.69 -USE_WINDOWS_ENCODING = NO
3.70 -
3.71 -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
3.72 -# include brief member descriptions after the members that are listed in
3.73 -# the file and class documentation (similar to JavaDoc).
3.74 -# Set to NO to disable this.
3.75 -
3.76 BRIEF_MEMBER_DESC = YES
3.77 -
3.78 -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
3.79 -# the brief description of a member or function before the detailed description.
3.80 -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
3.81 -# brief descriptions will be completely suppressed.
3.82 -
3.83 REPEAT_BRIEF = NO
3.84 -
3.85 -# This tag implements a quasi-intelligent brief description abbreviator
3.86 -# that is used to form the text in various listings. Each string
3.87 -# in this list, if found as the leading text of the brief description, will be
3.88 -# stripped from the text and the result after processing the whole list, is
3.89 -# used as the annotated text. Otherwise, the brief description is used as-is.
3.90 -# If left blank, the following values are used ("$name" is automatically
3.91 -# replaced with the name of the entity): "The $name class" "The $name widget"
3.92 -# "The $name file" "is" "provides" "specifies" "contains"
3.93 -# "represents" "a" "an" "the"
3.94 -
3.95 ABBREVIATE_BRIEF =
3.96 -
3.97 -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
3.98 -# Doxygen will generate a detailed section even if there is only a brief
3.99 -# description.
3.100 -
3.101 ALWAYS_DETAILED_SEC = NO
3.102 -
3.103 -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
3.104 -# inherited members of a class in the documentation of that class as if those
3.105 -# members were ordinary class members. Constructors, destructors and assignment
3.106 -# operators of the base classes will not be shown.
3.107 -
3.108 INLINE_INHERITED_MEMB = NO
3.109 -
3.110 -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
3.111 -# path before files name in the file list and in the header files. If set
3.112 -# to NO the shortest path that makes the file name unique will be used.
3.113 -
3.114 FULL_PATH_NAMES = YES
3.115 -
3.116 -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
3.117 -# can be used to strip a user-defined part of the path. Stripping is
3.118 -# only done if one of the specified strings matches the left-hand part of
3.119 -# the path. The tag can be used to show relative paths in the file list.
3.120 -# If left blank the directory from which doxygen is run is used as the
3.121 -# path to strip.
3.122 -
3.123 STRIP_FROM_PATH = @abs_top_srcdir@
3.124 -
3.125 -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
3.126 -# the path mentioned in the documentation of a class, which tells
3.127 -# the reader which header file to include in order to use a class.
3.128 -# If left blank only the name of the header file containing the class
3.129 -# definition is used. Otherwise one should specify the include paths that
3.130 -# are normally passed to the compiler using the -I flag.
3.131 -
3.132 STRIP_FROM_INC_PATH = @abs_top_srcdir@
3.133 -
3.134 -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
3.135 -# (but less readable) file names. This can be useful is your file systems
3.136 -# doesn't support long names like on DOS, Mac, or CD-ROM.
3.137 -
3.138 SHORT_NAMES = YES
3.139 -
3.140 -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
3.141 -# will interpret the first line (until the first dot) of a JavaDoc-style
3.142 -# comment as the brief description. If set to NO, the JavaDoc
3.143 -# comments will behave just like the Qt-style comments (thus requiring an
3.144 -# explicit @brief command for a brief description.
3.145 -
3.146 JAVADOC_AUTOBRIEF = NO
3.147 -
3.148 -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
3.149 -# treat a multi-line C++ special comment block (i.e. a block of //! or ///
3.150 -# comments) as a brief description. This used to be the default behaviour.
3.151 -# The new default is to treat a multi-line C++ comment block as a detailed
3.152 -# description. Set this tag to YES if you prefer the old behaviour instead.
3.153 -
3.154 +QT_AUTOBRIEF = NO
3.155 MULTILINE_CPP_IS_BRIEF = NO
3.156 -
3.157 -# If the DETAILS_AT_TOP tag is set to YES then Doxygen
3.158 -# will output the detailed description near the top, like JavaDoc.
3.159 -# If set to NO, the detailed description appears after the member
3.160 -# documentation.
3.161 -
3.162 DETAILS_AT_TOP = YES
3.163 -
3.164 -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
3.165 -# member inherits the documentation from any documented member that it
3.166 -# re-implements.
3.167 -
3.168 INHERIT_DOCS = NO
3.169 -
3.170 -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
3.171 -# tag is set to YES, then doxygen will reuse the documentation of the first
3.172 -# member in the group (if any) for the other members of the group. By default
3.173 -# all members of a group must be documented explicitly.
3.174 -
3.175 +SEPARATE_MEMBER_PAGES = NO
3.176 +TAB_SIZE = 8
3.177 +ALIASES =
3.178 +OPTIMIZE_OUTPUT_FOR_C = NO
3.179 +OPTIMIZE_OUTPUT_JAVA = NO
3.180 +OPTIMIZE_FOR_FORTRAN = NO
3.181 +OPTIMIZE_OUTPUT_VHDL = NO
3.182 +BUILTIN_STL_SUPPORT = YES
3.183 +CPP_CLI_SUPPORT = NO
3.184 +SIP_SUPPORT = NO
3.185 DISTRIBUTE_GROUP_DOC = NO
3.186 -
3.187 -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
3.188 -# a new page for each member. If set to NO, the documentation of a member will
3.189 -# be part of the file/class/namespace that contains it.
3.190 -
3.191 -SEPARATE_MEMBER_PAGES = NO
3.192 -
3.193 -# The TAB_SIZE tag can be used to set the number of spaces in a tab.
3.194 -# Doxygen uses this value to replace tabs by spaces in code fragments.
3.195 -
3.196 -TAB_SIZE = 8
3.197 -
3.198 -# This tag can be used to specify a number of aliases that acts
3.199 -# as commands in the documentation. An alias has the form "name=value".
3.200 -# For example adding "sideeffect=\par Side Effects:\n" will allow you to
3.201 -# put the command \sideeffect (or @sideeffect) in the documentation, which
3.202 -# will result in a user-defined paragraph with heading "Side Effects:".
3.203 -# You can put \n's in the value part of an alias to insert newlines.
3.204 -
3.205 -ALIASES =
3.206 -
3.207 -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
3.208 -# sources only. Doxygen will then generate output that is more tailored for C.
3.209 -# For instance, some of the names that are used will be different. The list
3.210 -# of all members will be omitted, etc.
3.211 -
3.212 -OPTIMIZE_OUTPUT_FOR_C = NO
3.213 -
3.214 -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
3.215 -# only. Doxygen will then generate output that is more tailored for Java.
3.216 -# For instance, namespaces will be presented as packages, qualified scopes
3.217 -# will look different, etc.
3.218 -
3.219 -OPTIMIZE_OUTPUT_JAVA = NO
3.220 -
3.221 -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
3.222 -# the same type (for instance a group of public functions) to be put as a
3.223 -# subgroup of that type (e.g. under the Public Functions section). Set it to
3.224 -# NO to prevent subgrouping. Alternatively, this can be done per class using
3.225 -# the \nosubgrouping command.
3.226 -
3.227 SUBGROUPING = YES
3.228 -
3.229 +TYPEDEF_HIDES_STRUCT = NO
3.230 #---------------------------------------------------------------------------
3.231 # Build related configuration options
3.232 #---------------------------------------------------------------------------
3.233 -
3.234 -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
3.235 -# documentation are documented, even if no documentation was available.
3.236 -# Private class members and static file members will be hidden unless
3.237 -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
3.238 -
3.239 EXTRACT_ALL = NO
3.240 -
3.241 -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
3.242 -# will be included in the documentation.
3.243 -
3.244 EXTRACT_PRIVATE = YES
3.245 -
3.246 -# If the EXTRACT_STATIC tag is set to YES all static members of a file
3.247 -# will be included in the documentation.
3.248 -
3.249 EXTRACT_STATIC = YES
3.250 -
3.251 -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
3.252 -# defined locally in source files will be included in the documentation.
3.253 -# If set to NO only classes defined in header files are included.
3.254 -
3.255 EXTRACT_LOCAL_CLASSES = NO
3.256 -
3.257 -# This flag is only useful for Objective-C code. When set to YES local
3.258 -# methods, which are defined in the implementation section but not in
3.259 -# the interface are included in the documentation.
3.260 -# If set to NO (the default) only methods in the interface are included.
3.261 -
3.262 EXTRACT_LOCAL_METHODS = NO
3.263 -
3.264 -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
3.265 -# undocumented members of documented classes, files or namespaces.
3.266 -# If set to NO (the default) these members will be included in the
3.267 -# various overviews, but no documentation section is generated.
3.268 -# This option has no effect if EXTRACT_ALL is enabled.
3.269 -
3.270 +EXTRACT_ANON_NSPACES = NO
3.271 HIDE_UNDOC_MEMBERS = YES
3.272 -
3.273 -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
3.274 -# undocumented classes that are normally visible in the class hierarchy.
3.275 -# If set to NO (the default) these classes will be included in the various
3.276 -# overviews. This option has no effect if EXTRACT_ALL is enabled.
3.277 -
3.278 HIDE_UNDOC_CLASSES = YES
3.279 -
3.280 -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
3.281 -# friend (class|struct|union) declarations.
3.282 -# If set to NO (the default) these declarations will be included in the
3.283 -# documentation.
3.284 -
3.285 HIDE_FRIEND_COMPOUNDS = NO
3.286 -
3.287 -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
3.288 -# documentation blocks found inside the body of a function.
3.289 -# If set to NO (the default) these blocks will be appended to the
3.290 -# function's detailed documentation block.
3.291 -
3.292 HIDE_IN_BODY_DOCS = NO
3.293 -
3.294 -# The INTERNAL_DOCS tag determines if documentation
3.295 -# that is typed after a \internal command is included. If the tag is set
3.296 -# to NO (the default) then the documentation will be excluded.
3.297 -# Set it to YES to include the internal documentation.
3.298 -
3.299 -INTERNAL_DOCS = @DOXYGEN_INTERNAL_DOCS@
3.300 -
3.301 -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
3.302 -# file names in lower-case letters. If set to YES upper-case letters are also
3.303 -# allowed. This is useful if you have classes or files whose names only differ
3.304 -# in case and if your file system supports case sensitive file names. Windows
3.305 -# and Mac users are advised to set this option to NO.
3.306 -
3.307 +INTERNAL_DOCS = NO
3.308 CASE_SENSE_NAMES = YES
3.309 -
3.310 -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
3.311 -# will show members with their full class and namespace scopes in the
3.312 -# documentation. If set to YES the scope will be hidden.
3.313 -
3.314 HIDE_SCOPE_NAMES = YES
3.315 -
3.316 -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
3.317 -# will put a list of the files that are included by a file in the documentation
3.318 -# of that file.
3.319 -
3.320 SHOW_INCLUDE_FILES = YES
3.321 -
3.322 -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
3.323 -# is inserted in the documentation for inline members.
3.324 -
3.325 INLINE_INFO = YES
3.326 -
3.327 -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
3.328 -# will sort the (detailed) documentation of file and class members
3.329 -# alphabetically by member name. If set to NO the members will appear in
3.330 -# declaration order.
3.331 -
3.332 SORT_MEMBER_DOCS = NO
3.333 -
3.334 -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
3.335 -# brief documentation of file, namespace and class members alphabetically
3.336 -# by member name. If set to NO (the default) the members will appear in
3.337 -# declaration order.
3.338 -
3.339 SORT_BRIEF_DOCS = NO
3.340 -
3.341 -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
3.342 -# sorted by fully-qualified names, including namespaces. If set to
3.343 -# NO (the default), the class list will be sorted only by class name,
3.344 -# not including the namespace part.
3.345 -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
3.346 -# Note: This option applies only to the class list, not to the
3.347 -# alphabetical list.
3.348 -
3.349 +SORT_GROUP_NAMES = NO
3.350 SORT_BY_SCOPE_NAME = NO
3.351 -
3.352 -# The GENERATE_TODOLIST tag can be used to enable (YES) or
3.353 -# disable (NO) the todo list. This list is created by putting \todo
3.354 -# commands in the documentation.
3.355 -
3.356 GENERATE_TODOLIST = YES
3.357 -
3.358 -# The GENERATE_TESTLIST tag can be used to enable (YES) or
3.359 -# disable (NO) the test list. This list is created by putting \test
3.360 -# commands in the documentation.
3.361 -
3.362 GENERATE_TESTLIST = YES
3.363 -
3.364 -# The GENERATE_BUGLIST tag can be used to enable (YES) or
3.365 -# disable (NO) the bug list. This list is created by putting \bug
3.366 -# commands in the documentation.
3.367 -
3.368 GENERATE_BUGLIST = YES
3.369 -
3.370 -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
3.371 -# disable (NO) the deprecated list. This list is created by putting
3.372 -# \deprecated commands in the documentation.
3.373 -
3.374 GENERATE_DEPRECATEDLIST= YES
3.375 -
3.376 -# The ENABLED_SECTIONS tag can be used to enable conditional
3.377 -# documentation sections, marked by \if sectionname ... \endif.
3.378 -
3.379 ENABLED_SECTIONS =
3.380 -
3.381 -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
3.382 -# the initial value of a variable or define consists of for it to appear in
3.383 -# the documentation. If the initializer consists of more lines than specified
3.384 -# here it will be hidden. Use a value of 0 to hide initializers completely.
3.385 -# The appearance of the initializer of individual variables and defines in the
3.386 -# documentation can be controlled using \showinitializer or \hideinitializer
3.387 -# command in the documentation regardless of this setting.
3.388 -
3.389 MAX_INITIALIZER_LINES = 5
3.390 -
3.391 -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
3.392 -# at the bottom of the documentation of classes and structs. If set to YES the
3.393 -# list will mention the files that were used to generate the documentation.
3.394 -
3.395 SHOW_USED_FILES = YES
3.396 -
3.397 -# If the sources in your project are distributed over multiple directories
3.398 -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
3.399 -# in the documentation.
3.400 -
3.401 SHOW_DIRECTORIES = YES
3.402 -
3.403 -# The FILE_VERSION_FILTER tag can be used to specify a program or script that
3.404 -# doxygen should invoke to get the current version for each file (typically from the
3.405 -# version control system). Doxygen will invoke the program by executing (via
3.406 -# popen()) the command <command> <input-file>, where <command> is the value of
3.407 -# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
3.408 -# provided by doxygen. Whatever the progam writes to standard output
3.409 -# is used as the file version. See the manual for examples.
3.410 -
3.411 FILE_VERSION_FILTER =
3.412 -
3.413 #---------------------------------------------------------------------------
3.414 # configuration options related to warning and progress messages
3.415 #---------------------------------------------------------------------------
3.416 -
3.417 -# The QUIET tag can be used to turn on/off the messages that are generated
3.418 -# by doxygen. Possible values are YES and NO. If left blank NO is used.
3.419 -
3.420 QUIET = NO
3.421 -
3.422 -# The WARNINGS tag can be used to turn on/off the warning messages that are
3.423 -# generated by doxygen. Possible values are YES and NO. If left blank
3.424 -# NO is used.
3.425 -
3.426 WARNINGS = YES
3.427 -
3.428 -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
3.429 -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
3.430 -# automatically be disabled.
3.431 -
3.432 WARN_IF_UNDOCUMENTED = YES
3.433 -
3.434 -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
3.435 -# potential errors in the documentation, such as not documenting some
3.436 -# parameters in a documented function, or documenting parameters that
3.437 -# don't exist or using markup commands wrongly.
3.438 -
3.439 WARN_IF_DOC_ERROR = YES
3.440 -
3.441 -# This WARN_NO_PARAMDOC option can be abled to get warnings for
3.442 -# functions that are documented, but have no documentation for their parameters
3.443 -# or return value. If set to NO (the default) doxygen will only warn about
3.444 -# wrong or incomplete parameter documentation, but not about the absence of
3.445 -# documentation.
3.446 -
3.447 WARN_NO_PARAMDOC = NO
3.448 -
3.449 -# The WARN_FORMAT tag determines the format of the warning messages that
3.450 -# doxygen can produce. The string should contain the $file, $line, and $text
3.451 -# tags, which will be replaced by the file and line number from which the
3.452 -# warning originated and the warning text. Optionally the format may contain
3.453 -# $version, which will be replaced by the version of the file (if it could
3.454 -# be obtained via FILE_VERSION_FILTER)
3.455 -
3.456 -WARN_FORMAT = "$file:$line: $text"
3.457 -
3.458 -# The WARN_LOGFILE tag can be used to specify a file to which warning
3.459 -# and error messages should be written. If left blank the output is written
3.460 -# to stderr.
3.461 -
3.462 +WARN_FORMAT = "$file:$line: $text "
3.463 WARN_LOGFILE = doxygen.log
3.464 -
3.465 #---------------------------------------------------------------------------
3.466 # configuration options related to the input files
3.467 #---------------------------------------------------------------------------
3.468 -
3.469 -# The INPUT tag can be used to specify the files and/or directories that contain
3.470 -# documented source files. You may enter file names like "myfile.cpp" or
3.471 -# directories like "/usr/src/myproject". Separate the files or directories
3.472 -# with spaces.
3.473 -
3.474 INPUT = @abs_top_srcdir@/doc \
3.475 @abs_top_srcdir@/lemon \
3.476 @abs_top_srcdir@/lemon/bits \
3.477 @@ -457,771 +87,165 @@
3.478 @abs_top_srcdir@/demo \
3.479 @abs_top_srcdir@/tools \
3.480 @abs_top_srcdir@/test/test_tools.h
3.481 -
3.482 -# If the value of the INPUT tag contains directories, you can use the
3.483 -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
3.484 -# and *.h) to filter out the source-files in the directories. If left
3.485 -# blank the following patterns are tested:
3.486 -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
3.487 -# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
3.488 -
3.489 -FILE_PATTERNS = *.h *.cc *.dox
3.490 -
3.491 -# The RECURSIVE tag can be used to turn specify whether or not subdirectories
3.492 -# should be searched for input files as well. Possible values are YES and NO.
3.493 -# If left blank NO is used.
3.494 -
3.495 +INPUT_ENCODING = UTF-8
3.496 +FILE_PATTERNS = *.h \
3.497 + *.cc \
3.498 + *.dox
3.499 RECURSIVE = NO
3.500 -
3.501 -# The EXCLUDE tag can be used to specify files and/or directories that should
3.502 -# excluded from the INPUT source files. This way you can easily exclude a
3.503 -# subdirectory from a directory tree whose root is specified with the INPUT tag.
3.504 -
3.505 EXCLUDE =
3.506 -
3.507 -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
3.508 -# directories that are symbolic links (a Unix filesystem feature) are excluded
3.509 -# from the input.
3.510 -
3.511 EXCLUDE_SYMLINKS = NO
3.512 -
3.513 -# If the value of the INPUT tag contains directories, you can use the
3.514 -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
3.515 -# certain files from those directories.
3.516 -
3.517 EXCLUDE_PATTERNS =
3.518 -
3.519 -# The EXAMPLE_PATH tag can be used to specify one or more files or
3.520 -# directories that contain example code fragments that are included (see
3.521 -# the \include command).
3.522 -
3.523 +EXCLUDE_SYMBOLS =
3.524 EXAMPLE_PATH = @abs_top_srcdir@/demo \
3.525 @abs_top_srcdir@/LICENSE \
3.526 @abs_top_srcdir@/doc
3.527 -
3.528 -# If the value of the EXAMPLE_PATH tag contains directories, you can use the
3.529 -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
3.530 -# and *.h) to filter out the source-files in the directories. If left
3.531 -# blank all files are included.
3.532 -
3.533 EXAMPLE_PATTERNS =
3.534 -
3.535 -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
3.536 -# searched for input files to be used with the \include or \dontinclude
3.537 -# commands irrespective of the value of the RECURSIVE tag.
3.538 -# Possible values are YES and NO. If left blank NO is used.
3.539 -
3.540 EXAMPLE_RECURSIVE = NO
3.541 -
3.542 -# The IMAGE_PATH tag can be used to specify one or more files or
3.543 -# directories that contain image that are included in the documentation (see
3.544 -# the \image command).
3.545 -
3.546 -IMAGE_PATH = @abs_top_srcdir@/doc/images
3.547 -
3.548 -# The INPUT_FILTER tag can be used to specify a program that doxygen should
3.549 -# invoke to filter for each input file. Doxygen will invoke the filter program
3.550 -# by executing (via popen()) the command <filter> <input-file>, where <filter>
3.551 -# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
3.552 -# input file. Doxygen will then use the output that the filter program writes
3.553 -# to standard output. If FILTER_PATTERNS is specified, this tag will be
3.554 -# ignored.
3.555 -
3.556 +IMAGE_PATH = @abs_top_srcdir@/doc/images \
3.557 + @abs_top_builddir@/doc/gen-images
3.558 INPUT_FILTER =
3.559 -
3.560 -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
3.561 -# basis. Doxygen will compare the file name with each pattern and apply the
3.562 -# filter if there is a match. The filters are a list of the form:
3.563 -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
3.564 -# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
3.565 -# is applied to all files.
3.566 -
3.567 FILTER_PATTERNS =
3.568 -
3.569 -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
3.570 -# INPUT_FILTER) will be used to filter the input files when producing source
3.571 -# files to browse (i.e. when SOURCE_BROWSER is set to YES).
3.572 -
3.573 FILTER_SOURCE_FILES = NO
3.574 -
3.575 #---------------------------------------------------------------------------
3.576 # configuration options related to source browsing
3.577 #---------------------------------------------------------------------------
3.578 -
3.579 -# If the SOURCE_BROWSER tag is set to YES then a list of source files will
3.580 -# be generated. Documented entities will be cross-referenced with these sources.
3.581 -# Note: To get rid of all source code in the generated output, make sure also
3.582 -# VERBATIM_HEADERS is set to NO.
3.583 -
3.584 SOURCE_BROWSER = NO
3.585 -
3.586 -# Setting the INLINE_SOURCES tag to YES will include the body
3.587 -# of functions and classes directly in the documentation.
3.588 -
3.589 INLINE_SOURCES = NO
3.590 -
3.591 -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
3.592 -# doxygen to hide any special comment blocks from generated source code
3.593 -# fragments. Normal C and C++ comments will always remain visible.
3.594 -
3.595 STRIP_CODE_COMMENTS = YES
3.596 -
3.597 -# If the REFERENCED_BY_RELATION tag is set to YES (the default)
3.598 -# then for each documented function all documented
3.599 -# functions referencing it will be listed.
3.600 -
3.601 REFERENCED_BY_RELATION = NO
3.602 -
3.603 -# If the REFERENCES_RELATION tag is set to YES (the default)
3.604 -# then for each documented function all documented entities
3.605 -# called/used by that function will be listed.
3.606 -
3.607 REFERENCES_RELATION = NO
3.608 -
3.609 -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
3.610 -# will generate a verbatim copy of the header file for each class for
3.611 -# which an include is specified. Set to NO to disable this.
3.612 -
3.613 +REFERENCES_LINK_SOURCE = YES
3.614 +USE_HTAGS = NO
3.615 VERBATIM_HEADERS = NO
3.616 -
3.617 #---------------------------------------------------------------------------
3.618 # configuration options related to the alphabetical class index
3.619 #---------------------------------------------------------------------------
3.620 -
3.621 -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
3.622 -# of all compounds will be generated. Enable this if the project
3.623 -# contains a lot of classes, structs, unions or interfaces.
3.624 -
3.625 ALPHABETICAL_INDEX = YES
3.626 -
3.627 -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
3.628 -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
3.629 -# in which this list will be split (can be a number in the range [1..20])
3.630 -
3.631 COLS_IN_ALPHA_INDEX = 2
3.632 -
3.633 -# In case all classes in a project start with a common prefix, all
3.634 -# classes will be put under the same header in the alphabetical index.
3.635 -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
3.636 -# should be ignored while generating the index headers.
3.637 -
3.638 IGNORE_PREFIX =
3.639 -
3.640 #---------------------------------------------------------------------------
3.641 # configuration options related to the HTML output
3.642 #---------------------------------------------------------------------------
3.643 -
3.644 -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
3.645 -# generate HTML output.
3.646 -
3.647 GENERATE_HTML = YES
3.648 -
3.649 -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
3.650 -# If a relative path is entered the value of OUTPUT_DIRECTORY will be
3.651 -# put in front of it. If left blank `html' will be used as the default path.
3.652 -
3.653 HTML_OUTPUT = html
3.654 -
3.655 -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
3.656 -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
3.657 -# doxygen will generate files with .html extension.
3.658 -
3.659 HTML_FILE_EXTENSION = .html
3.660 -
3.661 -# The HTML_HEADER tag can be used to specify a personal HTML header for
3.662 -# each generated HTML page. If it is left blank doxygen will generate a
3.663 -# standard header.
3.664 -
3.665 HTML_HEADER =
3.666 -
3.667 -# The HTML_FOOTER tag can be used to specify a personal HTML footer for
3.668 -# each generated HTML page. If it is left blank doxygen will generate a
3.669 -# standard footer.
3.670 -
3.671 HTML_FOOTER =
3.672 -
3.673 -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
3.674 -# style sheet that is used by each HTML page. It can be used to
3.675 -# fine-tune the look of the HTML output. If the tag is left blank doxygen
3.676 -# will generate a default style sheet. Note that doxygen will try to copy
3.677 -# the style sheet file to the HTML output directory, so don't put your own
3.678 -# stylesheet in the HTML output directory as well, or it will be erased!
3.679 -
3.680 HTML_STYLESHEET =
3.681 -
3.682 -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
3.683 -# files or namespaces will be aligned in HTML using tables. If set to
3.684 -# NO a bullet list will be used.
3.685 -
3.686 HTML_ALIGN_MEMBERS = YES
3.687 -
3.688 -# If the GENERATE_HTMLHELP tag is set to YES, additional index files
3.689 -# will be generated that can be used as input for tools like the
3.690 -# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
3.691 -# of the generated HTML documentation.
3.692 -
3.693 GENERATE_HTMLHELP = NO
3.694 -
3.695 -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
3.696 -# be used to specify the file name of the resulting .chm file. You
3.697 -# can add a path in front of the file if the result should not be
3.698 -# written to the html output directory.
3.699 -
3.700 +GENERATE_DOCSET = NO
3.701 +DOCSET_FEEDNAME = "Doxygen generated docs"
3.702 +DOCSET_BUNDLE_ID = org.doxygen.Project
3.703 +HTML_DYNAMIC_SECTIONS = NO
3.704 CHM_FILE =
3.705 -
3.706 -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
3.707 -# be used to specify the location (absolute path including file name) of
3.708 -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
3.709 -# the HTML help compiler on the generated index.hhp.
3.710 -
3.711 HHC_LOCATION =
3.712 -
3.713 -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
3.714 -# controls if a separate .chi index file is generated (YES) or that
3.715 -# it should be included in the master .chm file (NO).
3.716 -
3.717 GENERATE_CHI = NO
3.718 -
3.719 -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
3.720 -# controls whether a binary table of contents is generated (YES) or a
3.721 -# normal table of contents (NO) in the .chm file.
3.722 -
3.723 BINARY_TOC = NO
3.724 -
3.725 -# The TOC_EXPAND flag can be set to YES to add extra items for group members
3.726 -# to the contents of the HTML help documentation and to the tree view.
3.727 -
3.728 TOC_EXPAND = NO
3.729 -
3.730 -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
3.731 -# top of each HTML page. The value NO (the default) enables the index and
3.732 -# the value YES disables it.
3.733 -
3.734 DISABLE_INDEX = NO
3.735 -
3.736 -# This tag can be used to set the number of enum values (range [1..20])
3.737 -# that doxygen will group on one line in the generated HTML documentation.
3.738 -
3.739 ENUM_VALUES_PER_LINE = 4
3.740 -
3.741 -# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
3.742 -# generated containing a tree-like index structure (just like the one that
3.743 -# is generated for HTML Help). For this to work a browser that supports
3.744 -# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
3.745 -# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
3.746 -# probably better off using the HTML help feature.
3.747 -
3.748 GENERATE_TREEVIEW = YES
3.749 -
3.750 -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
3.751 -# used to set the initial width (in pixels) of the frame in which the tree
3.752 -# is shown.
3.753 -
3.754 TREEVIEW_WIDTH = 250
3.755 -
3.756 #---------------------------------------------------------------------------
3.757 # configuration options related to the LaTeX output
3.758 #---------------------------------------------------------------------------
3.759 -
3.760 -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
3.761 -# generate Latex output.
3.762 -
3.763 GENERATE_LATEX = NO
3.764 -
3.765 -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
3.766 -# If a relative path is entered the value of OUTPUT_DIRECTORY will be
3.767 -# put in front of it. If left blank `latex' will be used as the default path.
3.768 -
3.769 LATEX_OUTPUT = latex
3.770 -
3.771 -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
3.772 -# invoked. If left blank `latex' will be used as the default command name.
3.773 -
3.774 LATEX_CMD_NAME = latex
3.775 -
3.776 -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
3.777 -# generate index for LaTeX. If left blank `makeindex' will be used as the
3.778 -# default command name.
3.779 -
3.780 MAKEINDEX_CMD_NAME = makeindex
3.781 -
3.782 -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
3.783 -# LaTeX documents. This may be useful for small projects and may help to
3.784 -# save some trees in general.
3.785 -
3.786 COMPACT_LATEX = YES
3.787 -
3.788 -# The PAPER_TYPE tag can be used to set the paper type that is used
3.789 -# by the printer. Possible values are: a4, a4wide, letter, legal and
3.790 -# executive. If left blank a4wide will be used.
3.791 -
3.792 PAPER_TYPE = a4wide
3.793 -
3.794 -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
3.795 -# packages that should be included in the LaTeX output.
3.796 -
3.797 EXTRA_PACKAGES = amsmath \
3.798 amssymb
3.799 -
3.800 -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
3.801 -# the generated latex document. The header should contain everything until
3.802 -# the first chapter. If it is left blank doxygen will generate a
3.803 -# standard header. Notice: only use this tag if you know what you are doing!
3.804 -
3.805 LATEX_HEADER =
3.806 -
3.807 -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
3.808 -# is prepared for conversion to pdf (using ps2pdf). The pdf file will
3.809 -# contain links (just like the HTML output) instead of page references
3.810 -# This makes the output suitable for online browsing using a pdf viewer.
3.811 -
3.812 PDF_HYPERLINKS = YES
3.813 -
3.814 -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
3.815 -# plain latex in the generated Makefile. Set this option to YES to get a
3.816 -# higher quality PDF documentation.
3.817 -
3.818 USE_PDFLATEX = YES
3.819 -
3.820 -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
3.821 -# command to the generated LaTeX files. This will instruct LaTeX to keep
3.822 -# running if errors occur, instead of asking the user for help.
3.823 -# This option is also used when generating formulas in HTML.
3.824 -
3.825 LATEX_BATCHMODE = NO
3.826 -
3.827 -# If LATEX_HIDE_INDICES is set to YES then doxygen will not
3.828 -# include the index chapters (such as File Index, Compound Index, etc.)
3.829 -# in the output.
3.830 -
3.831 LATEX_HIDE_INDICES = NO
3.832 -
3.833 #---------------------------------------------------------------------------
3.834 # configuration options related to the RTF output
3.835 #---------------------------------------------------------------------------
3.836 -
3.837 -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
3.838 -# The RTF output is optimized for Word 97 and may not look very pretty with
3.839 -# other RTF readers or editors.
3.840 -
3.841 GENERATE_RTF = NO
3.842 -
3.843 -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
3.844 -# If a relative path is entered the value of OUTPUT_DIRECTORY will be
3.845 -# put in front of it. If left blank `rtf' will be used as the default path.
3.846 -
3.847 RTF_OUTPUT = rtf
3.848 -
3.849 -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
3.850 -# RTF documents. This may be useful for small projects and may help to
3.851 -# save some trees in general.
3.852 -
3.853 COMPACT_RTF = NO
3.854 -
3.855 -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
3.856 -# will contain hyperlink fields. The RTF file will
3.857 -# contain links (just like the HTML output) instead of page references.
3.858 -# This makes the output suitable for online browsing using WORD or other
3.859 -# programs which support those fields.
3.860 -# Note: wordpad (write) and others do not support links.
3.861 -
3.862 RTF_HYPERLINKS = NO
3.863 -
3.864 -# Load stylesheet definitions from file. Syntax is similar to doxygen's
3.865 -# config file, i.e. a series of assignments. You only have to provide
3.866 -# replacements, missing definitions are set to their default value.
3.867 -
3.868 RTF_STYLESHEET_FILE =
3.869 -
3.870 -# Set optional variables used in the generation of an rtf document.
3.871 -# Syntax is similar to doxygen's config file.
3.872 -
3.873 RTF_EXTENSIONS_FILE =
3.874 -
3.875 #---------------------------------------------------------------------------
3.876 # configuration options related to the man page output
3.877 #---------------------------------------------------------------------------
3.878 -
3.879 -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
3.880 -# generate man pages
3.881 -
3.882 GENERATE_MAN = NO
3.883 -
3.884 -# The MAN_OUTPUT tag is used to specify where the man pages will be put.
3.885 -# If a relative path is entered the value of OUTPUT_DIRECTORY will be
3.886 -# put in front of it. If left blank `man' will be used as the default path.
3.887 -
3.888 MAN_OUTPUT = man
3.889 -
3.890 -# The MAN_EXTENSION tag determines the extension that is added to
3.891 -# the generated man pages (default is the subroutine's section .3)
3.892 -
3.893 MAN_EXTENSION = .3
3.894 -
3.895 -# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
3.896 -# then it will generate one additional man file for each entity
3.897 -# documented in the real man page(s). These additional files
3.898 -# only source the real man page, but without them the man command
3.899 -# would be unable to find the correct page. The default is NO.
3.900 -
3.901 MAN_LINKS = NO
3.902 -
3.903 #---------------------------------------------------------------------------
3.904 # configuration options related to the XML output
3.905 #---------------------------------------------------------------------------
3.906 -
3.907 -# If the GENERATE_XML tag is set to YES Doxygen will
3.908 -# generate an XML file that captures the structure of
3.909 -# the code including all documentation.
3.910 -
3.911 GENERATE_XML = NO
3.912 -
3.913 -# The XML_OUTPUT tag is used to specify where the XML pages will be put.
3.914 -# If a relative path is entered the value of OUTPUT_DIRECTORY will be
3.915 -# put in front of it. If left blank `xml' will be used as the default path.
3.916 -
3.917 XML_OUTPUT = xml
3.918 -
3.919 -# The XML_SCHEMA tag can be used to specify an XML schema,
3.920 -# which can be used by a validating XML parser to check the
3.921 -# syntax of the XML files.
3.922 -
3.923 XML_SCHEMA =
3.924 -
3.925 -# The XML_DTD tag can be used to specify an XML DTD,
3.926 -# which can be used by a validating XML parser to check the
3.927 -# syntax of the XML files.
3.928 -
3.929 XML_DTD =
3.930 -
3.931 -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
3.932 -# dump the program listings (including syntax highlighting
3.933 -# and cross-referencing information) to the XML output. Note that
3.934 -# enabling this will significantly increase the size of the XML output.
3.935 -
3.936 XML_PROGRAMLISTING = YES
3.937 -
3.938 #---------------------------------------------------------------------------
3.939 # configuration options for the AutoGen Definitions output
3.940 #---------------------------------------------------------------------------
3.941 -
3.942 -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
3.943 -# generate an AutoGen Definitions (see autogen.sf.net) file
3.944 -# that captures the structure of the code including all
3.945 -# documentation. Note that this feature is still experimental
3.946 -# and incomplete at the moment.
3.947 -
3.948 GENERATE_AUTOGEN_DEF = NO
3.949 -
3.950 #---------------------------------------------------------------------------
3.951 # configuration options related to the Perl module output
3.952 #---------------------------------------------------------------------------
3.953 -
3.954 -# If the GENERATE_PERLMOD tag is set to YES Doxygen will
3.955 -# generate a Perl module file that captures the structure of
3.956 -# the code including all documentation. Note that this
3.957 -# feature is still experimental and incomplete at the
3.958 -# moment.
3.959 -
3.960 GENERATE_PERLMOD = NO
3.961 -
3.962 -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
3.963 -# the necessary Makefile rules, Perl scripts and LaTeX code to be able
3.964 -# to generate PDF and DVI output from the Perl module output.
3.965 -
3.966 PERLMOD_LATEX = NO
3.967 -
3.968 -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
3.969 -# nicely formatted so it can be parsed by a human reader. This is useful
3.970 -# if you want to understand what is going on. On the other hand, if this
3.971 -# tag is set to NO the size of the Perl module output will be much smaller
3.972 -# and Perl will parse it just the same.
3.973 -
3.974 PERLMOD_PRETTY = YES
3.975 -
3.976 -# The names of the make variables in the generated doxyrules.make file
3.977 -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
3.978 -# This is useful so different doxyrules.make files included by the same
3.979 -# Makefile don't overwrite each other's variables.
3.980 -
3.981 PERLMOD_MAKEVAR_PREFIX =
3.982 -
3.983 #---------------------------------------------------------------------------
3.984 # Configuration options related to the preprocessor
3.985 #---------------------------------------------------------------------------
3.986 -
3.987 -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
3.988 -# evaluate all C-preprocessor directives found in the sources and include
3.989 -# files.
3.990 -
3.991 ENABLE_PREPROCESSING = YES
3.992 -
3.993 -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
3.994 -# names in the source code. If set to NO (the default) only conditional
3.995 -# compilation will be performed. Macro expansion can be done in a controlled
3.996 -# way by setting EXPAND_ONLY_PREDEF to YES.
3.997 -
3.998 MACRO_EXPANSION = NO
3.999 -
3.1000 -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
3.1001 -# then the macro expansion is limited to the macros specified with the
3.1002 -# PREDEFINED and EXPAND_AS_PREDEFINED tags.
3.1003 -
3.1004 EXPAND_ONLY_PREDEF = NO
3.1005 -
3.1006 -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
3.1007 -# in the INCLUDE_PATH (see below) will be search if a #include is found.
3.1008 -
3.1009 SEARCH_INCLUDES = YES
3.1010 -
3.1011 -# The INCLUDE_PATH tag can be used to specify one or more directories that
3.1012 -# contain include files that are not input files but should be processed by
3.1013 -# the preprocessor.
3.1014 -
3.1015 INCLUDE_PATH =
3.1016 -
3.1017 -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
3.1018 -# patterns (like *.h and *.hpp) to filter out the header-files in the
3.1019 -# directories. If left blank, the patterns specified with FILE_PATTERNS will
3.1020 -# be used.
3.1021 -
3.1022 INCLUDE_FILE_PATTERNS =
3.1023 -
3.1024 -# The PREDEFINED tag can be used to specify one or more macro names that
3.1025 -# are defined before the preprocessor is started (similar to the -D option of
3.1026 -# gcc). The argument of the tag is a list of macros of the form: name
3.1027 -# or name=definition (no spaces). If the definition and the = are
3.1028 -# omitted =1 is assumed. To prevent a macro definition from being
3.1029 -# undefined via #undef or recursively expanded use the := operator
3.1030 -# instead of the = operator.
3.1031 -
3.1032 PREDEFINED = DOXYGEN
3.1033 -
3.1034 -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
3.1035 -# this tag can be used to specify a list of macro names that should be expanded.
3.1036 -# The macro definition that is found in the sources will be used.
3.1037 -# Use the PREDEFINED tag if you want to use a different macro definition.
3.1038 -
3.1039 EXPAND_AS_DEFINED =
3.1040 -
3.1041 -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
3.1042 -# doxygen's preprocessor will remove all function-like macros that are alone
3.1043 -# on a line, have an all uppercase name, and do not end with a semicolon. Such
3.1044 -# function macros are typically used for boiler-plate code, and will confuse
3.1045 -# the parser if not removed.
3.1046 -
3.1047 SKIP_FUNCTION_MACROS = YES
3.1048 -
3.1049 #---------------------------------------------------------------------------
3.1050 # Configuration::additions related to external references
3.1051 #---------------------------------------------------------------------------
3.1052 -
3.1053 -# The TAGFILES option can be used to specify one or more tagfiles.
3.1054 -# Optionally an initial location of the external documentation
3.1055 -# can be added for each tagfile. The format of a tag file without
3.1056 -# this location is as follows:
3.1057 -# TAGFILES = file1 file2 ...
3.1058 -# Adding location for the tag files is done as follows:
3.1059 -# TAGFILES = file1=loc1 "file2 = loc2" ...
3.1060 -# where "loc1" and "loc2" can be relative or absolute paths or
3.1061 -# URLs. If a location is present for each tag, the installdox tool
3.1062 -# does not have to be run to correct the links.
3.1063 -# Note that each tag file must have a unique name
3.1064 -# (where the name does NOT include the path)
3.1065 -# If a tag file is not located in the directory in which doxygen
3.1066 -# is run, you must also specify the path to the tagfile here.
3.1067 -
3.1068 -TAGFILES = "@abs_top_srcdir@/doc/libstdc++.tag = http://gcc.gnu.org/onlinedocs/libstdc++/latest-doxygen/"
3.1069 -
3.1070 -# When a file name is specified after GENERATE_TAGFILE, doxygen will create
3.1071 -# a tag file that is based on the input files it reads.
3.1072 -
3.1073 +TAGFILES = "@abs_top_srcdir@/doc/libstdc++.tag = http://gcc.gnu.org/onlinedocs/libstdc++/latest-doxygen/ "
3.1074 GENERATE_TAGFILE = html/lemon.tag
3.1075 -
3.1076 -# If the ALLEXTERNALS tag is set to YES all external classes will be listed
3.1077 -# in the class index. If set to NO only the inherited external classes
3.1078 -# will be listed.
3.1079 -
3.1080 ALLEXTERNALS = NO
3.1081 -
3.1082 -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
3.1083 -# in the modules index. If set to NO, only the current project's groups will
3.1084 -# be listed.
3.1085 -
3.1086 EXTERNAL_GROUPS = NO
3.1087 -
3.1088 -# The PERL_PATH should be the absolute path and name of the perl script
3.1089 -# interpreter (i.e. the result of `which perl').
3.1090 -
3.1091 PERL_PATH = /usr/bin/perl
3.1092 -
3.1093 #---------------------------------------------------------------------------
3.1094 # Configuration options related to the dot tool
3.1095 #---------------------------------------------------------------------------
3.1096 -
3.1097 -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
3.1098 -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
3.1099 -# or super classes. Setting the tag to NO turns the diagrams off. Note that
3.1100 -# this option is superseded by the HAVE_DOT option below. This is only a
3.1101 -# fallback. It is recommended to install and use dot, since it yields more
3.1102 -# powerful graphs.
3.1103 -
3.1104 CLASS_DIAGRAMS = NO
3.1105 -
3.1106 -# If set to YES, the inheritance and collaboration graphs will hide
3.1107 -# inheritance and usage relations if the target is undocumented
3.1108 -# or is not a class.
3.1109 -
3.1110 +MSCGEN_PATH =
3.1111 HIDE_UNDOC_RELATIONS = YES
3.1112 -
3.1113 -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
3.1114 -# available from the path. This tool is part of Graphviz, a graph visualization
3.1115 -# toolkit from AT&T and Lucent Bell Labs. The other options in this section
3.1116 -# have no effect if this option is set to NO (the default)
3.1117 -
3.1118 HAVE_DOT = YES
3.1119 -
3.1120 -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
3.1121 -# will generate a graph for each documented class showing the direct and
3.1122 -# indirect inheritance relations. Setting this tag to YES will force the
3.1123 -# the CLASS_DIAGRAMS tag to NO.
3.1124 -
3.1125 CLASS_GRAPH = YES
3.1126 -
3.1127 -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
3.1128 -# will generate a graph for each documented class showing the direct and
3.1129 -# indirect implementation dependencies (inheritance, containment, and
3.1130 -# class references variables) of the class with other documented classes.
3.1131 -
3.1132 COLLABORATION_GRAPH = NO
3.1133 -
3.1134 -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
3.1135 -# will generate a graph for groups, showing the direct groups dependencies
3.1136 -
3.1137 GROUP_GRAPHS = NO
3.1138 -
3.1139 -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
3.1140 -# collaboration diagrams in a style similar to the OMG's Unified Modeling
3.1141 -# Language.
3.1142 -
3.1143 UML_LOOK = NO
3.1144 -
3.1145 -# If set to YES, the inheritance and collaboration graphs will show the
3.1146 -# relations between templates and their instances.
3.1147 -
3.1148 TEMPLATE_RELATIONS = NO
3.1149 -
3.1150 -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
3.1151 -# tags are set to YES then doxygen will generate a graph for each documented
3.1152 -# file showing the direct and indirect include dependencies of the file with
3.1153 -# other documented files.
3.1154 -
3.1155 INCLUDE_GRAPH = NO
3.1156 -
3.1157 -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
3.1158 -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
3.1159 -# documented header file showing the documented files that directly or
3.1160 -# indirectly include this file.
3.1161 -
3.1162 INCLUDED_BY_GRAPH = NO
3.1163 -
3.1164 -# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
3.1165 -# generate a call dependency graph for every global function or class method.
3.1166 -# Note that enabling this option will significantly increase the time of a run.
3.1167 -# So in most cases it will be better to enable call graphs for selected
3.1168 -# functions only using the \callgraph command.
3.1169 -
3.1170 CALL_GRAPH = NO
3.1171 -
3.1172 -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
3.1173 -# will graphical hierarchy of all classes instead of a textual one.
3.1174 -
3.1175 +CALLER_GRAPH = NO
3.1176 GRAPHICAL_HIERARCHY = NO
3.1177 -
3.1178 -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
3.1179 -# then doxygen will show the dependencies a directory has on other directories
3.1180 -# in a graphical way. The dependency relations are determined by the #include
3.1181 -# relations between the files in the directories.
3.1182 -
3.1183 DIRECTORY_GRAPH = NO
3.1184 -
3.1185 -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
3.1186 -# generated by dot. Possible values are png, jpg, or gif
3.1187 -# If left blank png will be used.
3.1188 -
3.1189 DOT_IMAGE_FORMAT = png
3.1190 -
3.1191 -# The tag DOT_PATH can be used to specify the path where the dot tool can be
3.1192 -# found. If left blank, it is assumed the dot tool can be found in the path.
3.1193 -
3.1194 DOT_PATH =
3.1195 -
3.1196 -# The DOTFILE_DIRS tag can be used to specify one or more directories that
3.1197 -# contain dot files that are included in the documentation (see the
3.1198 -# \dotfile command).
3.1199 -
3.1200 DOTFILE_DIRS =
3.1201 -
3.1202 -# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
3.1203 -# (in pixels) of the graphs generated by dot. If a graph becomes larger than
3.1204 -# this value, doxygen will try to truncate the graph, so that it fits within
3.1205 -# the specified constraint. Beware that most browsers cannot cope with very
3.1206 -# large images.
3.1207 -
3.1208 -MAX_DOT_GRAPH_WIDTH = 1024
3.1209 -
3.1210 -# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
3.1211 -# (in pixels) of the graphs generated by dot. If a graph becomes larger than
3.1212 -# this value, doxygen will try to truncate the graph, so that it fits within
3.1213 -# the specified constraint. Beware that most browsers cannot cope with very
3.1214 -# large images.
3.1215 -
3.1216 -MAX_DOT_GRAPH_HEIGHT = 1024
3.1217 -
3.1218 -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
3.1219 -# graphs generated by dot. A depth value of 3 means that only nodes reachable
3.1220 -# from the root by following a path via at most 3 edges will be shown. Nodes
3.1221 -# that lay further from the root node will be omitted. Note that setting this
3.1222 -# option to 1 or 2 may greatly reduce the computation time needed for large
3.1223 -# code bases. Also note that a graph may be further truncated if the graph's
3.1224 -# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
3.1225 -# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
3.1226 -# the graph is not depth-constrained.
3.1227 -
3.1228 +DOT_GRAPH_MAX_NODES = 50
3.1229 MAX_DOT_GRAPH_DEPTH = 0
3.1230 -
3.1231 -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
3.1232 -# background. This is disabled by default, which results in a white background.
3.1233 -# Warning: Depending on the platform used, enabling this option may lead to
3.1234 -# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
3.1235 -# read).
3.1236 -
3.1237 DOT_TRANSPARENT = NO
3.1238 -
3.1239 -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
3.1240 -# files in one run (i.e. multiple -o and -T options on the command line). This
3.1241 -# makes dot run faster, but since only newer versions of dot (>1.8.10)
3.1242 -# support this, this feature is disabled by default.
3.1243 -
3.1244 DOT_MULTI_TARGETS = NO
3.1245 -
3.1246 -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
3.1247 -# generate a legend page explaining the meaning of the various boxes and
3.1248 -# arrows in the dot generated graphs.
3.1249 -
3.1250 GENERATE_LEGEND = YES
3.1251 -
3.1252 -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
3.1253 -# remove the intermediate dot files that are used to generate
3.1254 -# the various graphs.
3.1255 -
3.1256 DOT_CLEANUP = YES
3.1257 -
3.1258 #---------------------------------------------------------------------------
3.1259 # Configuration::additions related to the search engine
3.1260 #---------------------------------------------------------------------------
3.1261 -
3.1262 -# The SEARCHENGINE tag specifies whether or not a search engine should be
3.1263 -# used. If set to NO the values of all tags below this one will be ignored.
3.1264 -
3.1265 SEARCHENGINE = NO
4.1 --- a/doc/Makefile.am Thu Apr 24 13:53:09 2008 +0100
4.2 +++ b/doc/Makefile.am Mon Apr 28 11:12:33 2008 +0100
4.3 @@ -8,10 +8,38 @@
4.4 doc/namespaces.dox \
4.5 doc/html
4.6
4.7 +DOC_EPS_IMAGES18 = \
4.8 + nodeshape_0.eps \
4.9 + nodeshape_1.eps \
4.10 + nodeshape_2.eps \
4.11 + nodeshape_3.eps \
4.12 + nodeshape_4.eps
4.13 +
4.14 +DOC_EPS_IMAGES = \
4.15 + $(DOC_EPS_IMAGES18)
4.16 +
4.17 +DOC_PNG_IMAGES = \
4.18 + $(DOC_EPS_IMAGES:%.eps=doc/gen-images/%.png)
4.19 +
4.20 +EXTRA_DIST += $(DOC_EPS_IMAGES:%=doc/images/%)
4.21 +
4.22 doc/html:
4.23 $(MAKE) $(AM_MAKEFLAGS) html
4.24
4.25 -html-local:
4.26 +GS_COMMAND=gs -dNOPAUSE -dBATCH -q -dEPSCrop -dTextAlphaBits=4 -dGraphicsAlphaBits=4
4.27 +
4.28 +$(DOC_EPS_IMAGES18:%.eps=doc/gen-images/%.png): doc/gen-images/%.png: doc/images/%.eps
4.29 + -mkdir doc/gen-images
4.30 + if test ${gs_found} = yes; then \
4.31 + $(GS_COMMAND) -sDEVICE=pngalpha -r18 -sOutputFile=$@ $<; \
4.32 + else \
4.33 + echo; \
4.34 + echo "Ghostscript not found."; \
4.35 + echo; \
4.36 + exit 1; \
4.37 + fi
4.38 +
4.39 +html-local: $(DOC_PNG_IMAGES)
4.40 if test ${doxygen_found} = yes; then \
4.41 cd doc; \
4.42 doxygen Doxyfile; \
4.43 @@ -26,6 +54,8 @@
4.44 clean-local:
4.45 -rm -rf doc/html
4.46 -rm -f doc/doxygen.log
4.47 + -rm -f $(DOC_PNG_IMAGES)
4.48 + -rm -rf doc/gen-images
4.49
4.50 update-external-tags:
4.51 wget -O doc/libstdc++.tag.tmp http://gcc.gnu.org/onlinedocs/libstdc++/latest-doxygen/libstdc++.tag && \
5.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000
5.2 +++ b/doc/images/nodeshape_0.eps Mon Apr 28 11:12:33 2008 +0100
5.3 @@ -0,0 +1,57 @@
5.4 +%!PS-Adobe-2.0 EPSF-2.0
5.5 +%%Title: LEMON GraphToEps figure
5.6 +%%Creator: LEMON GraphToEps function
5.7 +%%BoundingBox: 0 0 200 200
5.8 +%%EndComments
5.9 +/lb { setlinewidth setrgbcolor newpath moveto
5.10 + 4 2 roll 1 index 1 index curveto stroke } bind def
5.11 +/l { setlinewidth setrgbcolor newpath moveto lineto stroke } bind def
5.12 +/c { newpath dup 3 index add 2 index moveto 0 360 arc closepath } bind def
5.13 +/sq { newpath 2 index 1 index add 2 index 2 index add moveto
5.14 + 2 index 1 index sub 2 index 2 index add lineto
5.15 + 2 index 1 index sub 2 index 2 index sub lineto
5.16 + 2 index 1 index add 2 index 2 index sub lineto
5.17 + closepath pop pop pop} bind def
5.18 +/di { newpath 2 index 1 index add 2 index moveto
5.19 + 2 index 2 index 2 index add lineto
5.20 + 2 index 1 index sub 2 index lineto
5.21 + 2 index 2 index 2 index sub lineto
5.22 + closepath pop pop pop} bind def
5.23 +/nc { 0 0 0 setrgbcolor 5 index 5 index 5 index c fill
5.24 + setrgbcolor 1.1 div c fill
5.25 + } bind def
5.26 +/nsq { 0 0 0 setrgbcolor 5 index 5 index 5 index sq fill
5.27 + setrgbcolor 1.1 div sq fill
5.28 + } bind def
5.29 +/ndi { 0 0 0 setrgbcolor 5 index 5 index 5 index di fill
5.30 + setrgbcolor 1.1 div di fill
5.31 + } bind def
5.32 +/arrl 1 def
5.33 +/arrw 0.3 def
5.34 +/lrl { 2 index mul exch 2 index mul exch rlineto pop} bind def
5.35 +/arr { setrgbcolor /y1 exch def /x1 exch def /dy exch def /dx exch def
5.36 + /w exch def /len exch def
5.37 + newpath x1 dy w 2 div mul add y1 dx w 2 div mul sub moveto
5.38 + len w sub arrl sub dx dy lrl
5.39 + arrw dy dx neg lrl
5.40 + dx arrl w add mul dy w 2 div arrw add mul sub
5.41 + dy arrl w add mul dx w 2 div arrw add mul add rlineto
5.42 + dx arrl w add mul neg dy w 2 div arrw add mul sub
5.43 + dy arrl w add mul neg dx w 2 div arrw add mul add rlineto
5.44 + arrw dy dx neg lrl
5.45 + len w sub arrl sub neg dx dy lrl
5.46 + closepath fill } bind def
5.47 +/cshow { 2 index 2 index moveto dup stringwidth pop
5.48 + neg 2 div fosi .35 mul neg rmoveto show pop pop} def
5.49 +
5.50 +gsave
5.51 +100 dup scale
5.52 +%Edges:
5.53 +gsave
5.54 +grestore
5.55 +%Nodes:
5.56 +gsave
5.57 +1 1 1 0.2 1 0.2 nc
5.58 +grestore
5.59 +grestore
5.60 +showpage
6.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000
6.2 +++ b/doc/images/nodeshape_1.eps Mon Apr 28 11:12:33 2008 +0100
6.3 @@ -0,0 +1,57 @@
6.4 +%!PS-Adobe-2.0 EPSF-2.0
6.5 +%%Title: LEMON GraphToEps figure
6.6 +%%Creator: LEMON GraphToEps function
6.7 +%%BoundingBox: 0 0 200 200
6.8 +%%EndComments
6.9 +/lb { setlinewidth setrgbcolor newpath moveto
6.10 + 4 2 roll 1 index 1 index curveto stroke } bind def
6.11 +/l { setlinewidth setrgbcolor newpath moveto lineto stroke } bind def
6.12 +/c { newpath dup 3 index add 2 index moveto 0 360 arc closepath } bind def
6.13 +/sq { newpath 2 index 1 index add 2 index 2 index add moveto
6.14 + 2 index 1 index sub 2 index 2 index add lineto
6.15 + 2 index 1 index sub 2 index 2 index sub lineto
6.16 + 2 index 1 index add 2 index 2 index sub lineto
6.17 + closepath pop pop pop} bind def
6.18 +/di { newpath 2 index 1 index add 2 index moveto
6.19 + 2 index 2 index 2 index add lineto
6.20 + 2 index 1 index sub 2 index lineto
6.21 + 2 index 2 index 2 index sub lineto
6.22 + closepath pop pop pop} bind def
6.23 +/nc { 0 0 0 setrgbcolor 5 index 5 index 5 index c fill
6.24 + setrgbcolor 1.1 div c fill
6.25 + } bind def
6.26 +/nsq { 0 0 0 setrgbcolor 5 index 5 index 5 index sq fill
6.27 + setrgbcolor 1.1 div sq fill
6.28 + } bind def
6.29 +/ndi { 0 0 0 setrgbcolor 5 index 5 index 5 index di fill
6.30 + setrgbcolor 1.1 div di fill
6.31 + } bind def
6.32 +/arrl 1 def
6.33 +/arrw 0.3 def
6.34 +/lrl { 2 index mul exch 2 index mul exch rlineto pop} bind def
6.35 +/arr { setrgbcolor /y1 exch def /x1 exch def /dy exch def /dx exch def
6.36 + /w exch def /len exch def
6.37 + newpath x1 dy w 2 div mul add y1 dx w 2 div mul sub moveto
6.38 + len w sub arrl sub dx dy lrl
6.39 + arrw dy dx neg lrl
6.40 + dx arrl w add mul dy w 2 div arrw add mul sub
6.41 + dy arrl w add mul dx w 2 div arrw add mul add rlineto
6.42 + dx arrl w add mul neg dy w 2 div arrw add mul sub
6.43 + dy arrl w add mul neg dx w 2 div arrw add mul add rlineto
6.44 + arrw dy dx neg lrl
6.45 + len w sub arrl sub neg dx dy lrl
6.46 + closepath fill } bind def
6.47 +/cshow { 2 index 2 index moveto dup stringwidth pop
6.48 + neg 2 div fosi .35 mul neg rmoveto show pop pop} def
6.49 +
6.50 +gsave
6.51 +100 dup scale
6.52 +%Edges:
6.53 +gsave
6.54 +grestore
6.55 +%Nodes:
6.56 +gsave
6.57 +1 1 1 0.2 1 0.2 nsq
6.58 +grestore
6.59 +grestore
6.60 +showpage
7.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000
7.2 +++ b/doc/images/nodeshape_2.eps Mon Apr 28 11:12:33 2008 +0100
7.3 @@ -0,0 +1,57 @@
7.4 +%!PS-Adobe-2.0 EPSF-2.0
7.5 +%%Title: LEMON GraphToEps figure
7.6 +%%Creator: LEMON GraphToEps function
7.7 +%%BoundingBox: 0 0 200 200
7.8 +%%EndComments
7.9 +/lb { setlinewidth setrgbcolor newpath moveto
7.10 + 4 2 roll 1 index 1 index curveto stroke } bind def
7.11 +/l { setlinewidth setrgbcolor newpath moveto lineto stroke } bind def
7.12 +/c { newpath dup 3 index add 2 index moveto 0 360 arc closepath } bind def
7.13 +/sq { newpath 2 index 1 index add 2 index 2 index add moveto
7.14 + 2 index 1 index sub 2 index 2 index add lineto
7.15 + 2 index 1 index sub 2 index 2 index sub lineto
7.16 + 2 index 1 index add 2 index 2 index sub lineto
7.17 + closepath pop pop pop} bind def
7.18 +/di { newpath 2 index 1 index add 2 index moveto
7.19 + 2 index 2 index 2 index add lineto
7.20 + 2 index 1 index sub 2 index lineto
7.21 + 2 index 2 index 2 index sub lineto
7.22 + closepath pop pop pop} bind def
7.23 +/nc { 0 0 0 setrgbcolor 5 index 5 index 5 index c fill
7.24 + setrgbcolor 1.1 div c fill
7.25 + } bind def
7.26 +/nsq { 0 0 0 setrgbcolor 5 index 5 index 5 index sq fill
7.27 + setrgbcolor 1.1 div sq fill
7.28 + } bind def
7.29 +/ndi { 0 0 0 setrgbcolor 5 index 5 index 5 index di fill
7.30 + setrgbcolor 1.1 div di fill
7.31 + } bind def
7.32 +/arrl 1 def
7.33 +/arrw 0.3 def
7.34 +/lrl { 2 index mul exch 2 index mul exch rlineto pop} bind def
7.35 +/arr { setrgbcolor /y1 exch def /x1 exch def /dy exch def /dx exch def
7.36 + /w exch def /len exch def
7.37 + newpath x1 dy w 2 div mul add y1 dx w 2 div mul sub moveto
7.38 + len w sub arrl sub dx dy lrl
7.39 + arrw dy dx neg lrl
7.40 + dx arrl w add mul dy w 2 div arrw add mul sub
7.41 + dy arrl w add mul dx w 2 div arrw add mul add rlineto
7.42 + dx arrl w add mul neg dy w 2 div arrw add mul sub
7.43 + dy arrl w add mul neg dx w 2 div arrw add mul add rlineto
7.44 + arrw dy dx neg lrl
7.45 + len w sub arrl sub neg dx dy lrl
7.46 + closepath fill } bind def
7.47 +/cshow { 2 index 2 index moveto dup stringwidth pop
7.48 + neg 2 div fosi .35 mul neg rmoveto show pop pop} def
7.49 +
7.50 +gsave
7.51 +100 dup scale
7.52 +%Edges:
7.53 +gsave
7.54 +grestore
7.55 +%Nodes:
7.56 +gsave
7.57 +1 1 1 0.2 1 0.2 ndi
7.58 +grestore
7.59 +grestore
7.60 +showpage
8.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000
8.2 +++ b/doc/images/nodeshape_3.eps Mon Apr 28 11:12:33 2008 +0100
8.3 @@ -0,0 +1,77 @@
8.4 +%!PS-Adobe-2.0 EPSF-2.0
8.5 +%%Title: LEMON GraphToEps figure
8.6 +%%Creator: LEMON GraphToEps function
8.7 +%%BoundingBox: 0 0 256 372
8.8 +%%EndComments
8.9 +/lb { setlinewidth setrgbcolor newpath moveto
8.10 + 4 2 roll 1 index 1 index curveto stroke } bind def
8.11 +/l { setlinewidth setrgbcolor newpath moveto lineto stroke } bind def
8.12 +/c { newpath dup 3 index add 2 index moveto 0 360 arc closepath } bind def
8.13 +/sq { newpath 2 index 1 index add 2 index 2 index add moveto
8.14 + 2 index 1 index sub 2 index 2 index add lineto
8.15 + 2 index 1 index sub 2 index 2 index sub lineto
8.16 + 2 index 1 index add 2 index 2 index sub lineto
8.17 + closepath pop pop pop} bind def
8.18 +/di { newpath 2 index 1 index add 2 index moveto
8.19 + 2 index 2 index 2 index add lineto
8.20 + 2 index 1 index sub 2 index lineto
8.21 + 2 index 2 index 2 index sub lineto
8.22 + closepath pop pop pop} bind def
8.23 +/nc { 0 0 0 setrgbcolor 5 index 5 index 5 index c fill
8.24 + setrgbcolor 1.1 div c fill
8.25 + } bind def
8.26 +/nsq { 0 0 0 setrgbcolor 5 index 5 index 5 index sq fill
8.27 + setrgbcolor 1.1 div sq fill
8.28 + } bind def
8.29 +/ndi { 0 0 0 setrgbcolor 5 index 5 index 5 index di fill
8.30 + setrgbcolor 1.1 div di fill
8.31 + } bind def
8.32 +/nfemale { 0 0 0 setrgbcolor 3 index 0.0909091 1.5 mul mul setlinewidth
8.33 + newpath 5 index 5 index moveto 5 index 5 index 5 index 3.01 mul sub
8.34 + lineto 5 index 4 index .7 mul sub 5 index 5 index 2.2 mul sub moveto
8.35 + 5 index 4 index .7 mul add 5 index 5 index 2.2 mul sub lineto stroke
8.36 + 5 index 5 index 5 index c fill
8.37 + setrgbcolor 1.1 div c fill
8.38 + } bind def
8.39 +/nmale {
8.40 + 0 0 0 setrgbcolor 3 index 0.0909091 1.5 mul mul setlinewidth
8.41 + newpath 5 index 5 index moveto
8.42 + 5 index 4 index 1 mul 1.5 mul add
8.43 + 5 index 5 index 3 sqrt 1.5 mul mul add
8.44 + 1 index 1 index lineto
8.45 + 1 index 1 index 7 index sub moveto
8.46 + 1 index 1 index lineto
8.47 + exch 5 index 3 sqrt .5 mul mul sub exch 5 index .5 mul sub lineto
8.48 + stroke
8.49 + 5 index 5 index 5 index c fill
8.50 + setrgbcolor 1.1 div c fill
8.51 + } bind def
8.52 +/arrl 1 def
8.53 +/arrw 0.3 def
8.54 +/lrl { 2 index mul exch 2 index mul exch rlineto pop} bind def
8.55 +/arr { setrgbcolor /y1 exch def /x1 exch def /dy exch def /dx exch def
8.56 + /w exch def /len exch def
8.57 + newpath x1 dy w 2 div mul add y1 dx w 2 div mul sub moveto
8.58 + len w sub arrl sub dx dy lrl
8.59 + arrw dy dx neg lrl
8.60 + dx arrl w add mul dy w 2 div arrw add mul sub
8.61 + dy arrl w add mul dx w 2 div arrw add mul add rlineto
8.62 + dx arrl w add mul neg dy w 2 div arrw add mul sub
8.63 + dy arrl w add mul neg dx w 2 div arrw add mul add rlineto
8.64 + arrw dy dx neg lrl
8.65 + len w sub arrl sub neg dx dy lrl
8.66 + closepath fill } bind def
8.67 +/cshow { 2 index 2 index moveto dup stringwidth pop
8.68 + neg 2 div fosi .35 mul neg rmoveto show pop pop} def
8.69 +
8.70 +gsave
8.71 +100 dup scale
8.72 +%Edges:
8.73 +gsave
8.74 +grestore
8.75 +%Nodes:
8.76 +gsave
8.77 +1 1 1 0.2 1 0.2 nmale
8.78 +grestore
8.79 +grestore
8.80 +showpage
9.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000
9.2 +++ b/doc/images/nodeshape_4.eps Mon Apr 28 11:12:33 2008 +0100
9.3 @@ -0,0 +1,77 @@
9.4 +%!PS-Adobe-2.0 EPSF-2.0
9.5 +%%Title: LEMON GraphToEps figure
9.6 +%%Creator: LEMON GraphToEps function
9.7 +%%BoundingBox: 0 -199 200 200
9.8 +%%EndComments
9.9 +/lb { setlinewidth setrgbcolor newpath moveto
9.10 + 4 2 roll 1 index 1 index curveto stroke } bind def
9.11 +/l { setlinewidth setrgbcolor newpath moveto lineto stroke } bind def
9.12 +/c { newpath dup 3 index add 2 index moveto 0 360 arc closepath } bind def
9.13 +/sq { newpath 2 index 1 index add 2 index 2 index add moveto
9.14 + 2 index 1 index sub 2 index 2 index add lineto
9.15 + 2 index 1 index sub 2 index 2 index sub lineto
9.16 + 2 index 1 index add 2 index 2 index sub lineto
9.17 + closepath pop pop pop} bind def
9.18 +/di { newpath 2 index 1 index add 2 index moveto
9.19 + 2 index 2 index 2 index add lineto
9.20 + 2 index 1 index sub 2 index lineto
9.21 + 2 index 2 index 2 index sub lineto
9.22 + closepath pop pop pop} bind def
9.23 +/nc { 0 0 0 setrgbcolor 5 index 5 index 5 index c fill
9.24 + setrgbcolor 1.1 div c fill
9.25 + } bind def
9.26 +/nsq { 0 0 0 setrgbcolor 5 index 5 index 5 index sq fill
9.27 + setrgbcolor 1.1 div sq fill
9.28 + } bind def
9.29 +/ndi { 0 0 0 setrgbcolor 5 index 5 index 5 index di fill
9.30 + setrgbcolor 1.1 div di fill
9.31 + } bind def
9.32 +/nfemale { 0 0 0 setrgbcolor 3 index 0.0909091 1.5 mul mul setlinewidth
9.33 + newpath 5 index 5 index moveto 5 index 5 index 5 index 3.01 mul sub
9.34 + lineto 5 index 4 index .7 mul sub 5 index 5 index 2.2 mul sub moveto
9.35 + 5 index 4 index .7 mul add 5 index 5 index 2.2 mul sub lineto stroke
9.36 + 5 index 5 index 5 index c fill
9.37 + setrgbcolor 1.1 div c fill
9.38 + } bind def
9.39 +/nmale {
9.40 + 0 0 0 setrgbcolor 3 index 0.0909091 1.5 mul mul setlinewidth
9.41 + newpath 5 index 5 index moveto
9.42 + 5 index 4 index 1 mul 1.5 mul add
9.43 + 5 index 5 index 3 sqrt 1.5 mul mul add
9.44 + 1 index 1 index lineto
9.45 + 1 index 1 index 7 index sub moveto
9.46 + 1 index 1 index lineto
9.47 + exch 5 index 3 sqrt .5 mul mul sub exch 5 index .5 mul sub lineto
9.48 + stroke
9.49 + 5 index 5 index 5 index c fill
9.50 + setrgbcolor 1.1 div c fill
9.51 + } bind def
9.52 +/arrl 1 def
9.53 +/arrw 0.3 def
9.54 +/lrl { 2 index mul exch 2 index mul exch rlineto pop} bind def
9.55 +/arr { setrgbcolor /y1 exch def /x1 exch def /dy exch def /dx exch def
9.56 + /w exch def /len exch def
9.57 + newpath x1 dy w 2 div mul add y1 dx w 2 div mul sub moveto
9.58 + len w sub arrl sub dx dy lrl
9.59 + arrw dy dx neg lrl
9.60 + dx arrl w add mul dy w 2 div arrw add mul sub
9.61 + dy arrl w add mul dx w 2 div arrw add mul add rlineto
9.62 + dx arrl w add mul neg dy w 2 div arrw add mul sub
9.63 + dy arrl w add mul neg dx w 2 div arrw add mul add rlineto
9.64 + arrw dy dx neg lrl
9.65 + len w sub arrl sub neg dx dy lrl
9.66 + closepath fill } bind def
9.67 +/cshow { 2 index 2 index moveto dup stringwidth pop
9.68 + neg 2 div fosi .35 mul neg rmoveto show pop pop} def
9.69 +
9.70 +gsave
9.71 +100 dup scale
9.72 +%Edges:
9.73 +gsave
9.74 +grestore
9.75 +%Nodes:
9.76 +gsave
9.77 +1 1 1 0.2 1 0.2 nfemale
9.78 +grestore
9.79 +grestore
9.80 +showpage