Simplify comparisons in min mean cycle classes (#179)
using extreme INF values instead of bool flags.

Add HartmannOrlin algorithm class (#179)
This algorithm is an improved version of Karp's original method,
it applies an efficient early termination scheme.
The interface is the same as Karp's and Howard's interface.

Add Karp algorithm class (#179)
based on the MinMeanCycle implementation in SVN -r3436.
The interface is reworked to be the same as Howard's interface.

Rename MinMeanCycle to Howard (#179)

Add a detailed test file for MinMeanCycle and fix test_tools.h (#179)

Rename cyclePath() to cycle() in MinMeanCycle (#179)

Traits class + named parameters for MinMeanCycle (#179)

- Add a Traits class defining LargeValue, Tolerance, Path types.
LargeValue is used for internal computations, it is 'long long'
if the length type is integer, otherwise it is 'double'.
- Add named template parameters for LargeValue and Path types.
- Improve numerical stability: remove divisions from the internal
computations. If the arc lengths are integers, then all used
values are integers (except for the cycleMean() query function,
of course).

Rework and fix the implementation of MinMeanCycle (#179)

- Fix the handling of the cycle means.
- Many implementation improvements:
- More efficient data storage for the strongly connected
components.
- Better handling of BFS queues.
- Merge consecutive BFS searches (perform two BFS searches
instead of three).

This version is about two times faster on average and an order of
magnitude faster if there are a lot of strongly connected components.

Simplify the interface of MinMeanCycle (#179)
Remove init() and reset(), and move their content into findMinMean().

Port MinMeanCycle from SVN -r3524 (#179)
with some doc improvements

Merge #184

Update Doxygen configuration file

Insert citations into the doc (#184)

- Add general citations to modules.
- Add specific citations for max flow and min cost flow algorithms.
- Add citations for the supported LP and MIP solvers.
- Extend the main page.
- Replace inproceedings entries with the journal versions.
- Add a new bibtex entry about network simplex.
- Remove unwanted entries.

Handle url fields in bib2dox.py (#184)
and modify the bibtex file using url fields.

Merge bugfix #322

Distribute LEMONConfig.cmake.in (#322)

Merge bugfix in #250

Merge #317

Remove unnecessary OsiCbc dependency (#317)

Fix (and improve) error message in mip_test.cc (#317)

Add soplex support to scripts/bootstrap.sh plus...
it checks whether cbc and soplex are installed at the given prefix.

Faster add row operation (#203)

One virtual function call instead of more

Improve bib2dox.py using \section for entiries (#184)

Integrate bib2dox.py into the build environments (#184)

Add bib->dox converter and initial references.bib (#184)

Merge #311

Merge

Add a warning for List(Di)Graph::Snapshot (#311)
and extend tests for snapshots

Modify the implementation of ListDigraph::ArcIt (#311)

The new implementation is based on out-arc iteration (like
ListGraph::ArcIt) instead of in-arc iteration to make it
consistent with the documentation.

Much better implementation for node splitting (#311)
in ListDigraph. This solution is the same as the one that
is used in SmartDigraph. It is much faster and does not
invalidate any iterator like the former implementation.

Add a resize() function to HypercubeGraph (#311)
just like the similar functions in other static graph structures,
and extend the test files to check these functions.

Add reserve functions to ListGraph and SmartGraph (#311)
ListDigraph and SmartDigraph already have such functions.

Doc improvements, fixes and unifications for graphs (#311)

Doc improvements and unification for graph concepts (#311)

Copyright notices added to scripts

Simple interactive bootstrap script

Merge #298

Merge

Small improvements for NetworkSimplex (#298)

Add a parameter to control arc mixing in NS (#298)

Small improvements in NS pivot rules (#298)

Merge #302

Add creator functions for IdMap and RangeIdMap (#302)

Rename ValueIterator to ValueIt in graph maps (#302)
but keep ValueIterator as an alias in CrossRefMap
(only for reverse compatibility).

Extend maps_test.cc (#302)

Doc improvements for several graph maps (#302)

Merge

Improvements for graph maps (#302)

- Add a count() function to CrossRefMap.
- Add tests for IdMap and RangeIdMap.
- Extend tests for CrossRefMap.
- Improve the doc.

Merge

Also check ReferenceMapTag in concept checks (#312)

Merge

Small doc improvements (#304)

Merge

Rearrange modules (#303)

Small doc improvements

Merge

Unify member names in heaps (#299)

The following renamings are made.

Public members:
- UnderFlowPriorityError -> PriorityUnderflowError
("underflow" is only one word)

Private members:
- bubble_up() -> bubbleUp()
- bubble_down() -> bubbleDown()
- second_child() -> secondChild()
- makeroot() -> makeRoot()
- relocate_last() -> relocateLast()
- data -> _data
- boxes -> _boxes

Move the heaps to a separate group (#299)

Improve and unify the documentation of heaps (#299)
and avoid a warning in SimpleBucketHeap::operator[].

Merge

Much faster implementation for BinomHeap (#301)

Smarter bubbleDown() in K-ary heaps (#301)

Small improvements in heap implementations (#301)

Make K a template parameter in KaryHeap (#301)

Improve and unify the doc + names in the new heaps (#301)

Bug fix in PairingHeap::pop() (#301)

Add fourary, k-ary, pairing and binomial heaps (#301)
These structures were implemented by Dorian Batha.

Merge

Add negativeCycle() function to BellmanFord (#51)

Add a detailed test file for BellmanFord (#51)

Improvements and unifications for BellmanFord (#51)

- Rework the function type interface to fit to dijkstra().
- Rename named template parameters (Def* -> Set*).
- Rename some private member variables
(to start with an underscore).
- Simplify template parameter names.
- Many unifications and improvements in the doc.

Port Bellman-Ford algorithm from SVN -r3524 (#51)

Merge

Improvements for iterable maps (#73)

Port iterable maps from SVN 3509 (#73)

Merge

Bug fix + extension in the rename script (#305)

Merge

Test file + doc improvements (#307)

Bug fix in Preflow and Circulation (#307)

Merge

Merge

Add missing 'explicit' keywords (#311)

Fix the implementation and doc of CrossRefMap (#302)

- Handle multiple values correctly with std::multimap.
- Clarify the problematic points in the doc.
- Add some basic tests for the class.

Unification of names in heaps (#50)

Simplified implementation of bucket heaps (#50)

Port remaining heaps from SVN -r 3509 (#50)

- FibHeap
- RadixHeap
- BucketHeap
- SimpleBucketHeap

Set the version to 'hg-tip' if everything fails

Minor CMake improvements

* Use the empty ELSE(), ENDIF(), ENDMACRO(), etc. syntax since this improves
readability and requires less typing.
* Use FIND_PACKAGE() instead of INCLUDE().
* Use the value of CMAKE_COMMAND variable instead of cmake, since this works
even if cmake is not in the PATH.

Put the version string into config.h

Also make it possible to set the version using the LEMON_VERSION environment
variable, and use the hg revision as version string in case this variable is
unset.

Fix the check for the 'long long' type

Change the label of the html project in Visual Studio

Generate and install LEMONConfig.cmake

Add tools/CMakeLists.txt to the tarball

Rename documentation install folder from 'docs' to 'html'

Remove duplications from doc/CMakeLists.txt

Suppress MSVC warnings using pragmas (#295)

Add artificial addNode() function to the arc/edge set classes

Avoid Intel C++ Compiler warnings

Disable Visual Studio warning C4503

Add lemon/config.h.cmake to the tarball

Resolve GCC-4.4 warnings & fix ambiguous op=() in graph_components.h

Update NEWS file

Extend min cost flow test file + check dual costs (#291)

Fix the GEQ/LEQ handling in NetworkSimplex + improve doc (#291)

- Fix the optimality conditions for the GEQ/LEQ form.
- Fix the initialization of the algortihm. It ensures correct
solutions and it is much faster for the inequality forms.
- Fix the pivot rules to search all the arcs that have to be
allowed to get in the basis.
- Better block size for the Block Search pivot rule.
- Improve documentation of the problem and move it to a
separate page.

Merge

Remove bits/base_extender.h, which is not used at all (#288)

Move list and edge sets to the graph module (#290)

Merge

Change the explanation of the acronym LEMON (#289)

Change Graph::Edge -> Graph::Arc inheritance to conversion (#283)

Change Undirector::Edge -> Undirector::Arc inheritance to conversion (#283)

Fix the faulty merge of unify-sources.sh in [586b65073025]

Doc fixes for lgf-gen (#282)

Merge

Merge

Small doc improvements (#257)

Fix glp_prob definition (#286)

Add a test file for the connectivity functions (#285)
The Euler tools have a separate test file.

Doc improvements and fixes for connectivity tools (#285)
And add loopFree(), parallelFree(), simpleGraph() to the module doc.

Bug fixes in connectivity.h (#285)

- Bug fix in tree().
- Rename simpleDigraph() to simpleGraph() (it works for both
directed and undirected graphs).
- Possibly faster implementation for parallelFree() and
simpleGraph().

Merge

Add the solver libraries to lemon.pc.in (#281)

Merge

Resolve gcc-4.3 warning in lemon/network_simplex.h

Less map copying in NetworkSimplex (#234)

- The graph is copied in the constructor instead of the init() function.
It must not be modified after the class is constructed.
- The maps are copied once (instead of twice).
- Remove FlowMap, PotentialMap typedefs and flowMap(), pontentialMap()
setter functions.
- flowMap() and potentialMap() query functions copy the values into the
given map (reference) instead of returning a const reference to a
previously constructed map.

Rename Flow to Value in the flow algorithms (#266)

We agreed that using Flow for the value type is misleading, since
a flow should be rather a function on the arcs, not a single value.

This patch reverts the changes of [dacc2cee2b4c] for Preflow and
Circulation.

Support negative costs and bounds in NetworkSimplex (#270)

* The interface is reworked to support negative costs and bounds.
- ProblemType and problemType() are renamed to
SupplyType and supplyType(), see also #234.
- ProblemType type is introduced similarly to the LP interface.
- 'bool run()' is replaced by 'ProblemType run()' to handle
unbounded problem instances, as well.
- Add INF public member constant similarly to the LP interface.
* Remove capacityMap() and boundMaps(), see also #266.
* Update the problem definition in the MCF module.
* Remove the usage of Circulation (and adaptors) for checking feasibility.
Check feasibility by examining the artifical arcs instead (after solving
the problem).
* Additional check for unbounded negative cycles found during the
algorithm (it is possible now, since negative costs are allowed).
* Fix in the constructor (the value types needn't be integer any more),
see also #254.
* Improve and extend the doc.
* Rework the test file and add test cases for negative costs and bounds.

Merge

Check the version number in FindGLPK (#277)

Add GLPK_ROOT_DIR variable to FindGLPK (#277)

Link libm and libpthread if using CPLEX (#277)

Add CPLEX_ROOT_DIR variable to FindCPLEX (#277)

Look for COIN libraries with and without the lib prefix too (#277)

This is necessary because on Windows when built using autotools the COIN
libraries are named in UNIX style, i.e. libCbc.lib insetad of Cbc.lib.

Merge

Merge

Remove superfluous HAVE_CONFIG_H (#278)

Add cbc.h to lemon/Makefile.am (#279)

Fix Makefile.am EXTRA_DIST (#276)

Merge

Merge and extend the fix of #275

Merge

Modify the interface of MinCostArborescence + improvements (#267)

- Rename arborescenceValue() to arborescenceCost().
- Rename DefXyz template named paramaters to SetXyz.
- Rearrange public functions (for better doc).
- Doc improvements.
- Extend the test file with interface checking.

Merge

Modify the interface of Suurballe (#266, #181)

- Move the parameters s and t from the constructor to the run()
function. It makes the interface capable for multiple run(s,t,k)
calls (possible improvement in the future) and it is more similar
to Dijkstra.
- Simliarly init() and findFlow(k) were replaced by init(s) and
findFlow(t,k). The separation of parameters s and t is for the
future plans of supporting multiple targets with one source node.
For more information see #181.
- LEMON_ASSERT for the Length type (check if it is integer).
- Doc improvements.
- Rearrange query functions.
- Extend test file.

Support infinite bounds in Circulation + fixes (#270, #266)

- Support infinite capacities.
- Bug fix in upperMap().
- Fixes and improvements in the documentation.

FindCOIN for CMake (#256)

FindCPLEX for CMake (#256)

FindGLPK improvements (#256)

Merge

Fix and uniform the usage of Graph and Parent typedefs (#268)

- Rename Graph typedefs to GraphType in the implementation of graph
maps and MapExtender to prevent conflicts (especially using VS).
They are not public.
- Make Parent typedefs private in all classes.
- Replace Digraph with Graph in some places
(fix faulty renamings of the script).
- Use Graph and Digraph typedefs (more) consequently.

VS compatibility fix (#268)

Exploit the changes of #190 in MCF test file (#234, #190)

Support LEQ and GEQ supply constraints in dimacs-solver (#234, #219)

Bug fix in NetworkSimplex (#234)

Fix usage of sqrt() (#268)

Merge and fix

Slightly modify the interface of Circulation and Preflow (#266)
in order to synchronize them to the interface of NetworkSimplex.

Circulation:
- The "delta" notation is replaced by "supply".
- lowerCapMap(), upperCapMap() are renamed to lowerMap() and upperMap().
- Value is renamed to Flow.

Preflow:
- Value is renamed to Flow.

Support >= and <= constraints in NetworkSimplex (#219, #234)

By default the same inequality constraints are supported as by
Circulation (the GEQ form), but the LEQ form can also be selected
using the problemType() function.

The documentation of the min. cost flow module is reworked and
extended with important notes and explanations about the different
variants of the problem and about the dual solution and optimality
conditions.

Support real types + numerical stability fix in NS (#254)

- Real types are supported by appropriate inicialization.
- A feature of the XTI spanning tree structure is removed to ensure
numerical stability (could cause problems using integer types).
The node potentials are updated always on the lower subtree,
in order to prevent overflow problems.
The former method isn't notably faster during to our tests.

Separate types for flow and cost values in NetworkSimplex (#234)

Support multiple run() calls in NetworkSimplex (#234)

Rework the interface of NetworkSimplex (#234)

The parameters of the problem can be set with separate functions
instead of different constructors.

Use XTI implementation instead of ATI in NetworkSimplex (#234)

XTI (eXtended Threaded Index) is an imporved version of the widely
known ATI (Augmented Threaded Index) method for storing and updating
the spanning tree structure in Network Simplex algorithms.

In the ATI data structure three indices are stored for each node:
predecessor, thread and depth. In the XTI data structure depth is
replaced by the number of successors and the last successor
(according to the thread index).

Internal restructuring and renamings in NetworkSimplex (#234)

Support min cost flow in dimacs-solver (#234)

Port NetworkSimplex from SVN -r3520 (#234)

Merge

Merge

Add more docs to LGF function interface (#109)

Fix in HaoOrlin (#264)

Improvements and fixes for the minimum cut algorithms (#264)

Merge

Rename max_matching.h to matching.h (#265)

Extend and modify the interface of matching algorithms (#265)

- Rename decomposition() to status() in MaxMatching.
- Add a new query function statusMap() to MaxMatching.
- Add a new query function matchingMap() to all the three classes.
- Rename matchingValue() to matchingWeight() in the weighted
matching classes.

Improvements for the Euler tools and the test file (#264)

Bug fix in the Euler iterators (#264)
Handle the case when the first node is isolated.

Imporvements for the matching algorithms (#264)

Merge

Merge

Rotate and enlarge some images (#262)

Add images + fixes in the doc of connectivity tools (#262)

Improve test files for some algorithms (#263)

Small doc improvements (#263)

Merge

Remove notes about reference maps as extra features (#190)

Exploit that the standard maps are reference maps (#190)

Standard graph maps are required to be reference maps (#190)

Various improvements and fixes (mainly in the doc) (#190)

Merge

Merge

Unified message handling for LP and MIP solvers (#9)

Force cplex checking (#260)

Add RangeIdMap, CrossRefMap to the rename script (#160)

Merge

DescriptorMap->RangeIdMap, InvertableMap->CrossRefMap (#160)

Merge

Fix compilation with MSVC (#259)

Fix compilation with MSVC (#258)

Single check macro for all COIN-OR dependencies (#204)

Add CBC support (#204)

Silent glp_adv_basis() (#255)

Fixing presolver and basis handling (#255)

Add 'demo' make target for building the demo programs

Fix in .hgignore

Merge

Accept negative values as unbounded capacity in dimacs readers (#243)
and some doc improvements.

Merge

Various doc improvements (#248)
- Rename all the ugly template parameters (too long and/or starting
with an underscore).
- Rename function parameters starting with an underscore.
- Extend the doc for many classes.
- Use LaTeX-style O(...) expressions only for the complicated ones.
- A lot of small unification changes.
- Small fixes.
- Some other improvements.

Improve timer and counter tests (#253)

- Do not print the output of counter_test.cc.
- Check the output of counter_test.cc.
- Shorten the running time of time_measure_test.cc.

Merge

Merge

Fix and extend the migration script (#245)

Bug fix in unify-sources.sh (#245)

Merge

CMake subproject support fixes (#240)

Fix lp related errors and warnings (#241 and #242)

Switch on warnings when compiling the lib

Make it possible to use LEMON as a CMake subproject (#240)

Merge

Merge

Doc improvements in GomoryHu (#66)
And make init() and start() private + bug fix in the test file.

Remane GomoryHuTree to GomoryHu (#66)

Cut iterators for GomoryHuTree + doc cleanup + bug fixes (#66)

Porting Gomory-Hu algorithm (#66)

Merge

Remove \bug and \todo comments

Fix newSolver()/cloneSolver() API in LP tools + doc improvements (#230)
- More logical structure for newSolver()/cloneSolver()
- Fix compilation problem with gcc-3.3
- Doc improvements

Fix Soplex config in autoconf (#230)

Automatic GLPK env deallocation (#213)

Fix GLPK tests (#213)

Merge

Merge

Merge

Merge

Small improvements in DIMACS solver (#226)

Avoid warnings in test/euler_test.h (#65)

Merge

Fix the naming convention of guards and remove one unnecessary include

Merge