ladanyi@1: # Doxyfile 1.4.2
ladanyi@1: 
ladanyi@1: # This file describes the settings to be used by the documentation system
ladanyi@1: # doxygen (www.doxygen.org) for a project
ladanyi@1: #
ladanyi@1: # All text after a hash (#) is considered a comment and will be ignored
ladanyi@1: # The format is:
ladanyi@1: #       TAG = value [value, ...]
ladanyi@1: # For lists items can also be appended using:
ladanyi@1: #       TAG += value [value, ...]
ladanyi@1: # Values that contain spaces should be placed between quotes (" ")
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # Project related configuration options
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
ladanyi@1: # by quotes) that should identify the project.
ladanyi@1: 
ladanyi@1: PROJECT_NAME           = @PACKAGE_NAME@
ladanyi@1: 
ladanyi@1: # The PROJECT_NUMBER tag can be used to enter a project or revision number. 
ladanyi@1: # This could be handy for archiving the generated documentation or 
ladanyi@1: # if some version control system is used.
ladanyi@1: 
ladanyi@1: PROJECT_NUMBER         = @PACKAGE_VERSION@
ladanyi@1: 
ladanyi@1: # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
ladanyi@1: # base path where the generated documentation will be put. 
ladanyi@1: # If a relative path is entered, it will be relative to the location 
ladanyi@1: # where doxygen was started. If left blank the current directory will be used.
ladanyi@1: 
ladanyi@1: OUTPUT_DIRECTORY       = 
ladanyi@1: 
ladanyi@1: # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
ladanyi@1: # 4096 sub-directories (in 2 levels) under the output directory of each output 
ladanyi@1: # format and will distribute the generated files over these directories. 
ladanyi@1: # Enabling this option can be useful when feeding doxygen a huge amount of 
ladanyi@1: # source files, where putting all generated files in the same directory would 
ladanyi@1: # otherwise cause performance problems for the file system.
ladanyi@1: 
ladanyi@1: CREATE_SUBDIRS         = NO
ladanyi@1: 
ladanyi@1: # The OUTPUT_LANGUAGE tag is used to specify the language in which all 
ladanyi@1: # documentation generated by doxygen is written. Doxygen will use this 
ladanyi@1: # information to generate all constant output in the proper language. 
ladanyi@1: # The default language is English, other supported languages are: 
ladanyi@1: # Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, 
ladanyi@1: # Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, 
ladanyi@1: # Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, 
ladanyi@1: # Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, 
ladanyi@1: # Swedish, and Ukrainian.
ladanyi@1: 
ladanyi@1: OUTPUT_LANGUAGE        = English
ladanyi@1: 
ladanyi@1: # This tag can be used to specify the encoding used in the generated output. 
ladanyi@1: # The encoding is not always determined by the language that is chosen, 
ladanyi@1: # but also whether or not the output is meant for Windows or non-Windows users. 
ladanyi@1: # In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES 
ladanyi@1: # forces the Windows encoding (this is the default for the Windows binary), 
ladanyi@1: # whereas setting the tag to NO uses a Unix-style encoding (the default for 
ladanyi@1: # all platforms other than Windows).
ladanyi@1: 
ladanyi@1: USE_WINDOWS_ENCODING   = NO
ladanyi@1: 
ladanyi@1: # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
ladanyi@1: # include brief member descriptions after the members that are listed in 
ladanyi@1: # the file and class documentation (similar to JavaDoc). 
ladanyi@1: # Set to NO to disable this.
ladanyi@1: 
ladanyi@1: BRIEF_MEMBER_DESC      = YES
ladanyi@1: 
ladanyi@1: # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
ladanyi@1: # the brief description of a member or function before the detailed description. 
ladanyi@1: # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
ladanyi@1: # brief descriptions will be completely suppressed.
ladanyi@1: 
ladanyi@1: REPEAT_BRIEF           = NO
ladanyi@1: 
ladanyi@1: # This tag implements a quasi-intelligent brief description abbreviator 
ladanyi@1: # that is used to form the text in various listings. Each string 
ladanyi@1: # in this list, if found as the leading text of the brief description, will be 
ladanyi@1: # stripped from the text and the result after processing the whole list, is 
ladanyi@1: # used as the annotated text. Otherwise, the brief description is used as-is. 
ladanyi@1: # If left blank, the following values are used ("$name" is automatically 
ladanyi@1: # replaced with the name of the entity): "The $name class" "The $name widget" 
ladanyi@1: # "The $name file" "is" "provides" "specifies" "contains" 
ladanyi@1: # "represents" "a" "an" "the"
ladanyi@1: 
ladanyi@1: ABBREVIATE_BRIEF       = 
ladanyi@1: 
ladanyi@1: # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
ladanyi@1: # Doxygen will generate a detailed section even if there is only a brief 
ladanyi@1: # description.
ladanyi@1: 
ladanyi@1: ALWAYS_DETAILED_SEC    = NO
ladanyi@1: 
ladanyi@1: # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all 
ladanyi@1: # inherited members of a class in the documentation of that class as if those 
ladanyi@1: # members were ordinary class members. Constructors, destructors and assignment 
ladanyi@1: # operators of the base classes will not be shown.
ladanyi@1: 
ladanyi@1: INLINE_INHERITED_MEMB  = NO
ladanyi@1: 
ladanyi@1: # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
ladanyi@1: # path before files name in the file list and in the header files. If set 
ladanyi@1: # to NO the shortest path that makes the file name unique will be used.
ladanyi@1: 
ladanyi@1: FULL_PATH_NAMES        = YES
ladanyi@1: 
ladanyi@1: # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
ladanyi@1: # can be used to strip a user-defined part of the path. Stripping is 
ladanyi@1: # only done if one of the specified strings matches the left-hand part of 
ladanyi@1: # the path. The tag can be used to show relative paths in the file list. 
ladanyi@1: # If left blank the directory from which doxygen is run is used as the 
ladanyi@1: # path to strip.
ladanyi@1: 
ladanyi@1: STRIP_FROM_PATH        = @abs_top_srcdir@
ladanyi@1: 
ladanyi@1: # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
ladanyi@1: # the path mentioned in the documentation of a class, which tells 
ladanyi@1: # the reader which header file to include in order to use a class. 
ladanyi@1: # If left blank only the name of the header file containing the class 
ladanyi@1: # definition is used. Otherwise one should specify the include paths that 
ladanyi@1: # are normally passed to the compiler using the -I flag.
ladanyi@1: 
ladanyi@1: STRIP_FROM_INC_PATH    = @abs_top_srcdir@
ladanyi@1: 
ladanyi@1: # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
ladanyi@1: # (but less readable) file names. This can be useful is your file systems 
ladanyi@1: # doesn't support long names like on DOS, Mac, or CD-ROM.
ladanyi@1: 
ladanyi@1: SHORT_NAMES            = YES
ladanyi@1: 
ladanyi@1: # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
ladanyi@1: # will interpret the first line (until the first dot) of a JavaDoc-style 
ladanyi@1: # comment as the brief description. If set to NO, the JavaDoc 
ladanyi@1: # comments will behave just like the Qt-style comments (thus requiring an 
ladanyi@1: # explicit @brief command for a brief description.
ladanyi@1: 
ladanyi@1: JAVADOC_AUTOBRIEF      = NO
ladanyi@1: 
ladanyi@1: # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
ladanyi@1: # treat a multi-line C++ special comment block (i.e. a block of //! or /// 
ladanyi@1: # comments) as a brief description. This used to be the default behaviour. 
ladanyi@1: # The new default is to treat a multi-line C++ comment block as a detailed 
ladanyi@1: # description. Set this tag to YES if you prefer the old behaviour instead.
ladanyi@1: 
ladanyi@1: MULTILINE_CPP_IS_BRIEF = NO
ladanyi@1: 
ladanyi@1: # If the DETAILS_AT_TOP tag is set to YES then Doxygen 
ladanyi@1: # will output the detailed description near the top, like JavaDoc.
ladanyi@1: # If set to NO, the detailed description appears after the member 
ladanyi@1: # documentation.
ladanyi@1: 
ladanyi@1: DETAILS_AT_TOP         = YES
ladanyi@1: 
ladanyi@1: # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
ladanyi@1: # member inherits the documentation from any documented member that it 
ladanyi@1: # re-implements.
ladanyi@1: 
ladanyi@1: INHERIT_DOCS           = NO
ladanyi@1: 
ladanyi@1: # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
ladanyi@1: # tag is set to YES, then doxygen will reuse the documentation of the first 
ladanyi@1: # member in the group (if any) for the other members of the group. By default 
ladanyi@1: # all members of a group must be documented explicitly.
ladanyi@1: 
ladanyi@1: DISTRIBUTE_GROUP_DOC   = NO
ladanyi@1: 
ladanyi@1: # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce 
ladanyi@1: # a new page for each member. If set to NO, the documentation of a member will 
ladanyi@1: # be part of the file/class/namespace that contains it.
ladanyi@1: 
ladanyi@1: SEPARATE_MEMBER_PAGES  = NO
ladanyi@1: 
ladanyi@1: # The TAB_SIZE tag can be used to set the number of spaces in a tab. 
ladanyi@1: # Doxygen uses this value to replace tabs by spaces in code fragments.
ladanyi@1: 
ladanyi@1: TAB_SIZE               = 8
ladanyi@1: 
ladanyi@1: # This tag can be used to specify a number of aliases that acts 
ladanyi@1: # as commands in the documentation. An alias has the form "name=value". 
ladanyi@1: # For example adding "sideeffect=\par Side Effects:\n" will allow you to 
ladanyi@1: # put the command \sideeffect (or @sideeffect) in the documentation, which 
ladanyi@1: # will result in a user-defined paragraph with heading "Side Effects:". 
ladanyi@1: # You can put \n's in the value part of an alias to insert newlines.
ladanyi@1: 
ladanyi@1: ALIASES                = 
ladanyi@1: 
ladanyi@1: # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 
ladanyi@1: # sources only. Doxygen will then generate output that is more tailored for C. 
ladanyi@1: # For instance, some of the names that are used will be different. The list 
ladanyi@1: # of all members will be omitted, etc.
ladanyi@1: 
ladanyi@1: OPTIMIZE_OUTPUT_FOR_C  = NO
ladanyi@1: 
ladanyi@1: # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources 
ladanyi@1: # only. Doxygen will then generate output that is more tailored for Java. 
ladanyi@1: # For instance, namespaces will be presented as packages, qualified scopes 
ladanyi@1: # will look different, etc.
ladanyi@1: 
ladanyi@1: OPTIMIZE_OUTPUT_JAVA   = NO
ladanyi@1: 
ladanyi@1: # Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
ladanyi@1: # the same type (for instance a group of public functions) to be put as a 
ladanyi@1: # subgroup of that type (e.g. under the Public Functions section). Set it to 
ladanyi@1: # NO to prevent subgrouping. Alternatively, this can be done per class using 
ladanyi@1: # the \nosubgrouping command.
ladanyi@1: 
ladanyi@1: SUBGROUPING            = YES
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # Build related configuration options
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
ladanyi@1: # documentation are documented, even if no documentation was available. 
ladanyi@1: # Private class members and static file members will be hidden unless 
ladanyi@1: # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
ladanyi@1: 
ladanyi@1: EXTRACT_ALL            = NO
ladanyi@1: 
ladanyi@1: # If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
ladanyi@1: # will be included in the documentation.
ladanyi@1: 
ladanyi@1: EXTRACT_PRIVATE        = YES
ladanyi@1: 
ladanyi@1: # If the EXTRACT_STATIC tag is set to YES all static members of a file 
ladanyi@1: # will be included in the documentation.
ladanyi@1: 
ladanyi@1: EXTRACT_STATIC         = YES
ladanyi@1: 
ladanyi@1: # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
ladanyi@1: # defined locally in source files will be included in the documentation. 
ladanyi@1: # If set to NO only classes defined in header files are included.
ladanyi@1: 
ladanyi@1: EXTRACT_LOCAL_CLASSES  = NO
ladanyi@1: 
ladanyi@1: # This flag is only useful for Objective-C code. When set to YES local 
ladanyi@1: # methods, which are defined in the implementation section but not in 
ladanyi@1: # the interface are included in the documentation. 
ladanyi@1: # If set to NO (the default) only methods in the interface are included.
ladanyi@1: 
ladanyi@1: EXTRACT_LOCAL_METHODS  = NO
ladanyi@1: 
ladanyi@1: # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
ladanyi@1: # undocumented members of documented classes, files or namespaces. 
ladanyi@1: # If set to NO (the default) these members will be included in the 
ladanyi@1: # various overviews, but no documentation section is generated. 
ladanyi@1: # This option has no effect if EXTRACT_ALL is enabled.
ladanyi@1: 
ladanyi@1: HIDE_UNDOC_MEMBERS     = YES
ladanyi@1: 
ladanyi@1: # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
ladanyi@1: # undocumented classes that are normally visible in the class hierarchy. 
ladanyi@1: # If set to NO (the default) these classes will be included in the various 
ladanyi@1: # overviews. This option has no effect if EXTRACT_ALL is enabled.
ladanyi@1: 
ladanyi@1: HIDE_UNDOC_CLASSES     = YES
ladanyi@1: 
ladanyi@1: # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
ladanyi@1: # friend (class|struct|union) declarations. 
ladanyi@1: # If set to NO (the default) these declarations will be included in the 
ladanyi@1: # documentation.
ladanyi@1: 
ladanyi@1: HIDE_FRIEND_COMPOUNDS  = NO
ladanyi@1: 
ladanyi@1: # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
ladanyi@1: # documentation blocks found inside the body of a function. 
ladanyi@1: # If set to NO (the default) these blocks will be appended to the 
ladanyi@1: # function's detailed documentation block.
ladanyi@1: 
ladanyi@1: HIDE_IN_BODY_DOCS      = NO
ladanyi@1: 
ladanyi@1: # The INTERNAL_DOCS tag determines if documentation 
ladanyi@1: # that is typed after a \internal command is included. If the tag is set 
ladanyi@1: # to NO (the default) then the documentation will be excluded. 
ladanyi@1: # Set it to YES to include the internal documentation.
ladanyi@1: 
ladanyi@1: INTERNAL_DOCS          = @DOXYGEN_INTERNAL_DOCS@
ladanyi@1: 
ladanyi@1: # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
ladanyi@1: # file names in lower-case letters. If set to YES upper-case letters are also 
ladanyi@1: # allowed. This is useful if you have classes or files whose names only differ 
ladanyi@1: # in case and if your file system supports case sensitive file names. Windows 
ladanyi@1: # and Mac users are advised to set this option to NO.
ladanyi@1: 
ladanyi@1: CASE_SENSE_NAMES       = YES
ladanyi@1: 
ladanyi@1: # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
ladanyi@1: # will show members with their full class and namespace scopes in the 
ladanyi@1: # documentation. If set to YES the scope will be hidden.
ladanyi@1: 
ladanyi@1: HIDE_SCOPE_NAMES       = YES
ladanyi@1: 
ladanyi@1: # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
ladanyi@1: # will put a list of the files that are included by a file in the documentation 
ladanyi@1: # of that file.
ladanyi@1: 
ladanyi@1: SHOW_INCLUDE_FILES     = YES
ladanyi@1: 
ladanyi@1: # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
ladanyi@1: # is inserted in the documentation for inline members.
ladanyi@1: 
ladanyi@1: INLINE_INFO            = YES
ladanyi@1: 
ladanyi@1: # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
ladanyi@1: # will sort the (detailed) documentation of file and class members 
ladanyi@1: # alphabetically by member name. If set to NO the members will appear in 
ladanyi@1: # declaration order.
ladanyi@1: 
ladanyi@1: SORT_MEMBER_DOCS       = NO
ladanyi@1: 
ladanyi@1: # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
ladanyi@1: # brief documentation of file, namespace and class members alphabetically 
ladanyi@1: # by member name. If set to NO (the default) the members will appear in 
ladanyi@1: # declaration order.
ladanyi@1: 
ladanyi@1: SORT_BRIEF_DOCS        = NO
ladanyi@1: 
ladanyi@1: # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
ladanyi@1: # sorted by fully-qualified names, including namespaces. If set to 
ladanyi@1: # NO (the default), the class list will be sorted only by class name, 
ladanyi@1: # not including the namespace part. 
ladanyi@1: # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
ladanyi@1: # Note: This option applies only to the class list, not to the 
ladanyi@1: # alphabetical list.
ladanyi@1: 
ladanyi@1: SORT_BY_SCOPE_NAME     = NO
ladanyi@1: 
ladanyi@1: # The GENERATE_TODOLIST tag can be used to enable (YES) or 
ladanyi@1: # disable (NO) the todo list. This list is created by putting \todo 
ladanyi@1: # commands in the documentation.
ladanyi@1: 
ladanyi@1: GENERATE_TODOLIST      = YES
ladanyi@1: 
ladanyi@1: # The GENERATE_TESTLIST tag can be used to enable (YES) or 
ladanyi@1: # disable (NO) the test list. This list is created by putting \test 
ladanyi@1: # commands in the documentation.
ladanyi@1: 
ladanyi@1: GENERATE_TESTLIST      = YES
ladanyi@1: 
ladanyi@1: # The GENERATE_BUGLIST tag can be used to enable (YES) or 
ladanyi@1: # disable (NO) the bug list. This list is created by putting \bug 
ladanyi@1: # commands in the documentation.
ladanyi@1: 
ladanyi@1: GENERATE_BUGLIST       = YES
ladanyi@1: 
ladanyi@1: # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
ladanyi@1: # disable (NO) the deprecated list. This list is created by putting 
ladanyi@1: # \deprecated commands in the documentation.
ladanyi@1: 
ladanyi@1: GENERATE_DEPRECATEDLIST= YES
ladanyi@1: 
ladanyi@1: # The ENABLED_SECTIONS tag can be used to enable conditional 
ladanyi@1: # documentation sections, marked by \if sectionname ... \endif.
ladanyi@1: 
ladanyi@1: ENABLED_SECTIONS       = 
ladanyi@1: 
ladanyi@1: # The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
ladanyi@1: # the initial value of a variable or define consists of for it to appear in 
ladanyi@1: # the documentation. If the initializer consists of more lines than specified 
ladanyi@1: # here it will be hidden. Use a value of 0 to hide initializers completely. 
ladanyi@1: # The appearance of the initializer of individual variables and defines in the 
ladanyi@1: # documentation can be controlled using \showinitializer or \hideinitializer 
ladanyi@1: # command in the documentation regardless of this setting.
ladanyi@1: 
ladanyi@1: MAX_INITIALIZER_LINES  = 5
ladanyi@1: 
ladanyi@1: # Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
ladanyi@1: # at the bottom of the documentation of classes and structs. If set to YES the 
ladanyi@1: # list will mention the files that were used to generate the documentation.
ladanyi@1: 
ladanyi@1: SHOW_USED_FILES        = YES
ladanyi@1: 
ladanyi@1: # If the sources in your project are distributed over multiple directories 
ladanyi@1: # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 
ladanyi@1: # in the documentation.
ladanyi@1: 
ladanyi@1: SHOW_DIRECTORIES       = YES
ladanyi@1: 
ladanyi@1: # The FILE_VERSION_FILTER tag can be used to specify a program or script that 
ladanyi@1: # doxygen should invoke to get the current version for each file (typically from the 
ladanyi@1: # version control system). Doxygen will invoke the program by executing (via 
ladanyi@1: # popen()) the command <command> <input-file>, where <command> is the value of 
ladanyi@1: # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 
ladanyi@1: # provided by doxygen. Whatever the progam writes to standard output 
ladanyi@1: # is used as the file version. See the manual for examples.
ladanyi@1: 
ladanyi@1: FILE_VERSION_FILTER    = 
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # configuration options related to warning and progress messages
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # The QUIET tag can be used to turn on/off the messages that are generated 
ladanyi@1: # by doxygen. Possible values are YES and NO. If left blank NO is used.
ladanyi@1: 
ladanyi@1: QUIET                  = NO
ladanyi@1: 
ladanyi@1: # The WARNINGS tag can be used to turn on/off the warning messages that are 
ladanyi@1: # generated by doxygen. Possible values are YES and NO. If left blank 
ladanyi@1: # NO is used.
ladanyi@1: 
ladanyi@1: WARNINGS               = YES
ladanyi@1: 
ladanyi@1: # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
ladanyi@1: # for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
ladanyi@1: # automatically be disabled.
ladanyi@1: 
ladanyi@1: WARN_IF_UNDOCUMENTED   = YES
ladanyi@1: 
ladanyi@1: # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
ladanyi@1: # potential errors in the documentation, such as not documenting some 
ladanyi@1: # parameters in a documented function, or documenting parameters that 
ladanyi@1: # don't exist or using markup commands wrongly.
ladanyi@1: 
ladanyi@1: WARN_IF_DOC_ERROR      = YES
ladanyi@1: 
ladanyi@1: # This WARN_NO_PARAMDOC option can be abled to get warnings for 
ladanyi@1: # functions that are documented, but have no documentation for their parameters 
ladanyi@1: # or return value. If set to NO (the default) doxygen will only warn about 
ladanyi@1: # wrong or incomplete parameter documentation, but not about the absence of 
ladanyi@1: # documentation.
ladanyi@1: 
ladanyi@1: WARN_NO_PARAMDOC       = NO
ladanyi@1: 
ladanyi@1: # The WARN_FORMAT tag determines the format of the warning messages that 
ladanyi@1: # doxygen can produce. The string should contain the $file, $line, and $text 
ladanyi@1: # tags, which will be replaced by the file and line number from which the 
ladanyi@1: # warning originated and the warning text. Optionally the format may contain 
ladanyi@1: # $version, which will be replaced by the version of the file (if it could 
ladanyi@1: # be obtained via FILE_VERSION_FILTER)
ladanyi@1: 
ladanyi@1: WARN_FORMAT            = "$file:$line: $text"
ladanyi@1: 
ladanyi@1: # The WARN_LOGFILE tag can be used to specify a file to which warning 
ladanyi@1: # and error messages should be written. If left blank the output is written 
ladanyi@1: # to stderr.
ladanyi@1: 
ladanyi@1: WARN_LOGFILE           = doxygen.log
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # configuration options related to the input files
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # The INPUT tag can be used to specify the files and/or directories that contain 
ladanyi@1: # documented source files. You may enter file names like "myfile.cpp" or 
ladanyi@1: # directories like "/usr/src/myproject". Separate the files or directories 
ladanyi@1: # with spaces.
ladanyi@1: 
ladanyi@1: INPUT                  = @abs_top_srcdir@/doc \
ladanyi@1:                          @abs_top_srcdir@/lemon \
ladanyi@1:                          @abs_top_srcdir@/lemon/bits \
ladanyi@1:                          @abs_top_srcdir@/lemon/concepts \
ladanyi@1:                          @abs_top_srcdir@/demo \
ladanyi@1:                          @abs_top_srcdir@/tools \
ladanyi@1:                          @abs_top_srcdir@/test/test_tools.h
ladanyi@1: 
ladanyi@1: # If the value of the INPUT tag contains directories, you can use the 
ladanyi@1: # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
ladanyi@1: # and *.h) to filter out the source-files in the directories. If left 
ladanyi@1: # blank the following patterns are tested: 
ladanyi@1: # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 
ladanyi@1: # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
ladanyi@1: 
ladanyi@1: FILE_PATTERNS          = *.h *.cc *.dox
ladanyi@1: 
ladanyi@1: # The RECURSIVE tag can be used to turn specify whether or not subdirectories 
ladanyi@1: # should be searched for input files as well. Possible values are YES and NO. 
ladanyi@1: # If left blank NO is used.
ladanyi@1: 
ladanyi@1: RECURSIVE              = NO
ladanyi@1: 
ladanyi@1: # The EXCLUDE tag can be used to specify files and/or directories that should 
ladanyi@1: # excluded from the INPUT source files. This way you can easily exclude a 
ladanyi@1: # subdirectory from a directory tree whose root is specified with the INPUT tag.
ladanyi@1: 
ladanyi@1: EXCLUDE                = 
ladanyi@1: 
ladanyi@1: # The EXCLUDE_SYMLINKS tag can be used select whether or not files or 
ladanyi@1: # directories that are symbolic links (a Unix filesystem feature) are excluded 
ladanyi@1: # from the input.
ladanyi@1: 
ladanyi@1: EXCLUDE_SYMLINKS       = NO
ladanyi@1: 
ladanyi@1: # If the value of the INPUT tag contains directories, you can use the 
ladanyi@1: # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
ladanyi@1: # certain files from those directories.
ladanyi@1: 
ladanyi@1: EXCLUDE_PATTERNS       = 
ladanyi@1: 
ladanyi@1: # The EXAMPLE_PATH tag can be used to specify one or more files or 
ladanyi@1: # directories that contain example code fragments that are included (see 
ladanyi@1: # the \include command).
ladanyi@1: 
ladanyi@1: EXAMPLE_PATH           = @abs_top_srcdir@/demo \
ladanyi@1:                          @abs_top_srcdir@/LICENSE \
ladanyi@1:                          @abs_top_srcdir@/doc
ladanyi@1: 
ladanyi@1: # If the value of the EXAMPLE_PATH tag contains directories, you can use the 
ladanyi@1: # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
ladanyi@1: # and *.h) to filter out the source-files in the directories. If left 
ladanyi@1: # blank all files are included.
ladanyi@1: 
ladanyi@1: EXAMPLE_PATTERNS       = 
ladanyi@1: 
ladanyi@1: # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
ladanyi@1: # searched for input files to be used with the \include or \dontinclude 
ladanyi@1: # commands irrespective of the value of the RECURSIVE tag. 
ladanyi@1: # Possible values are YES and NO. If left blank NO is used.
ladanyi@1: 
ladanyi@1: EXAMPLE_RECURSIVE      = NO
ladanyi@1: 
ladanyi@1: # The IMAGE_PATH tag can be used to specify one or more files or 
ladanyi@1: # directories that contain image that are included in the documentation (see 
ladanyi@1: # the \image command).
ladanyi@1: 
ladanyi@1: IMAGE_PATH             = @abs_top_srcdir@/doc/images
ladanyi@1: 
ladanyi@1: # The INPUT_FILTER tag can be used to specify a program that doxygen should 
ladanyi@1: # invoke to filter for each input file. Doxygen will invoke the filter program 
ladanyi@1: # by executing (via popen()) the command <filter> <input-file>, where <filter> 
ladanyi@1: # is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
ladanyi@1: # input file. Doxygen will then use the output that the filter program writes 
ladanyi@1: # to standard output.  If FILTER_PATTERNS is specified, this tag will be 
ladanyi@1: # ignored.
ladanyi@1: 
ladanyi@1: INPUT_FILTER           = 
ladanyi@1: 
ladanyi@1: # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 
ladanyi@1: # basis.  Doxygen will compare the file name with each pattern and apply the 
ladanyi@1: # filter if there is a match.  The filters are a list of the form: 
ladanyi@1: # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 
ladanyi@1: # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
ladanyi@1: # is applied to all files.
ladanyi@1: 
ladanyi@1: FILTER_PATTERNS        = 
ladanyi@1: 
ladanyi@1: # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
ladanyi@1: # INPUT_FILTER) will be used to filter the input files when producing source 
ladanyi@1: # files to browse (i.e. when SOURCE_BROWSER is set to YES).
ladanyi@1: 
ladanyi@1: FILTER_SOURCE_FILES    = NO
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # configuration options related to source browsing
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # If the SOURCE_BROWSER tag is set to YES then a list of source files will 
ladanyi@1: # be generated. Documented entities will be cross-referenced with these sources. 
ladanyi@1: # Note: To get rid of all source code in the generated output, make sure also 
ladanyi@1: # VERBATIM_HEADERS is set to NO.
ladanyi@1: 
ladanyi@1: SOURCE_BROWSER         = NO
ladanyi@1: 
ladanyi@1: # Setting the INLINE_SOURCES tag to YES will include the body 
ladanyi@1: # of functions and classes directly in the documentation.
ladanyi@1: 
ladanyi@1: INLINE_SOURCES         = NO
ladanyi@1: 
ladanyi@1: # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
ladanyi@1: # doxygen to hide any special comment blocks from generated source code 
ladanyi@1: # fragments. Normal C and C++ comments will always remain visible.
ladanyi@1: 
ladanyi@1: STRIP_CODE_COMMENTS    = YES
ladanyi@1: 
ladanyi@1: # If the REFERENCED_BY_RELATION tag is set to YES (the default) 
ladanyi@1: # then for each documented function all documented 
ladanyi@1: # functions referencing it will be listed.
ladanyi@1: 
ladanyi@1: REFERENCED_BY_RELATION = NO
ladanyi@1: 
ladanyi@1: # If the REFERENCES_RELATION tag is set to YES (the default) 
ladanyi@1: # then for each documented function all documented entities 
ladanyi@1: # called/used by that function will be listed.
ladanyi@1: 
ladanyi@1: REFERENCES_RELATION    = NO
ladanyi@1: 
ladanyi@1: # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
ladanyi@1: # will generate a verbatim copy of the header file for each class for 
ladanyi@1: # which an include is specified. Set to NO to disable this.
ladanyi@1: 
ladanyi@1: VERBATIM_HEADERS       = NO
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # configuration options related to the alphabetical class index
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
ladanyi@1: # of all compounds will be generated. Enable this if the project 
ladanyi@1: # contains a lot of classes, structs, unions or interfaces.
ladanyi@1: 
ladanyi@1: ALPHABETICAL_INDEX     = YES
ladanyi@1: 
ladanyi@1: # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
ladanyi@1: # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
ladanyi@1: # in which this list will be split (can be a number in the range [1..20])
ladanyi@1: 
ladanyi@1: COLS_IN_ALPHA_INDEX    = 2
ladanyi@1: 
ladanyi@1: # In case all classes in a project start with a common prefix, all 
ladanyi@1: # classes will be put under the same header in the alphabetical index. 
ladanyi@1: # The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
ladanyi@1: # should be ignored while generating the index headers.
ladanyi@1: 
ladanyi@1: IGNORE_PREFIX          = 
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # configuration options related to the HTML output
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
ladanyi@1: # generate HTML output.
ladanyi@1: 
ladanyi@1: GENERATE_HTML          = YES
ladanyi@1: 
ladanyi@1: # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
ladanyi@1: # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
ladanyi@1: # put in front of it. If left blank `html' will be used as the default path.
ladanyi@1: 
ladanyi@1: HTML_OUTPUT            = html
ladanyi@1: 
ladanyi@1: # The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
ladanyi@1: # each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
ladanyi@1: # doxygen will generate files with .html extension.
ladanyi@1: 
ladanyi@1: HTML_FILE_EXTENSION    = .html
ladanyi@1: 
ladanyi@1: # The HTML_HEADER tag can be used to specify a personal HTML header for 
ladanyi@1: # each generated HTML page. If it is left blank doxygen will generate a 
ladanyi@1: # standard header.
ladanyi@1: 
ladanyi@1: HTML_HEADER            = 
ladanyi@1: 
ladanyi@1: # The HTML_FOOTER tag can be used to specify a personal HTML footer for 
ladanyi@1: # each generated HTML page. If it is left blank doxygen will generate a 
ladanyi@1: # standard footer.
ladanyi@1: 
ladanyi@1: HTML_FOOTER            = 
ladanyi@1: 
ladanyi@1: # The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
ladanyi@1: # style sheet that is used by each HTML page. It can be used to 
ladanyi@1: # fine-tune the look of the HTML output. If the tag is left blank doxygen 
ladanyi@1: # will generate a default style sheet. Note that doxygen will try to copy 
ladanyi@1: # the style sheet file to the HTML output directory, so don't put your own 
ladanyi@1: # stylesheet in the HTML output directory as well, or it will be erased!
ladanyi@1: 
ladanyi@1: HTML_STYLESHEET        = 
ladanyi@1: 
ladanyi@1: # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
ladanyi@1: # files or namespaces will be aligned in HTML using tables. If set to 
ladanyi@1: # NO a bullet list will be used.
ladanyi@1: 
ladanyi@1: HTML_ALIGN_MEMBERS     = YES
ladanyi@1: 
ladanyi@1: # If the GENERATE_HTMLHELP tag is set to YES, additional index files 
ladanyi@1: # will be generated that can be used as input for tools like the 
ladanyi@1: # Microsoft HTML help workshop to generate a compressed HTML help file (.chm) 
ladanyi@1: # of the generated HTML documentation.
ladanyi@1: 
ladanyi@1: GENERATE_HTMLHELP      = NO
ladanyi@1: 
ladanyi@1: # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
ladanyi@1: # be used to specify the file name of the resulting .chm file. You 
ladanyi@1: # can add a path in front of the file if the result should not be 
ladanyi@1: # written to the html output directory.
ladanyi@1: 
ladanyi@1: CHM_FILE               = 
ladanyi@1: 
ladanyi@1: # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 
ladanyi@1: # be used to specify the location (absolute path including file name) of 
ladanyi@1: # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 
ladanyi@1: # the HTML help compiler on the generated index.hhp.
ladanyi@1: 
ladanyi@1: HHC_LOCATION           = 
ladanyi@1: 
ladanyi@1: # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
ladanyi@1: # controls if a separate .chi index file is generated (YES) or that 
ladanyi@1: # it should be included in the master .chm file (NO).
ladanyi@1: 
ladanyi@1: GENERATE_CHI           = NO
ladanyi@1: 
ladanyi@1: # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
ladanyi@1: # controls whether a binary table of contents is generated (YES) or a 
ladanyi@1: # normal table of contents (NO) in the .chm file.
ladanyi@1: 
ladanyi@1: BINARY_TOC             = NO
ladanyi@1: 
ladanyi@1: # The TOC_EXPAND flag can be set to YES to add extra items for group members 
ladanyi@1: # to the contents of the HTML help documentation and to the tree view.
ladanyi@1: 
ladanyi@1: TOC_EXPAND             = NO
ladanyi@1: 
ladanyi@1: # The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
ladanyi@1: # top of each HTML page. The value NO (the default) enables the index and 
ladanyi@1: # the value YES disables it.
ladanyi@1: 
ladanyi@1: DISABLE_INDEX          = NO
ladanyi@1: 
ladanyi@1: # This tag can be used to set the number of enum values (range [1..20]) 
ladanyi@1: # that doxygen will group on one line in the generated HTML documentation.
ladanyi@1: 
ladanyi@1: ENUM_VALUES_PER_LINE   = 4
ladanyi@1: 
ladanyi@1: # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
ladanyi@1: # generated containing a tree-like index structure (just like the one that 
ladanyi@1: # is generated for HTML Help). For this to work a browser that supports 
ladanyi@1: # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
ladanyi@1: # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
ladanyi@1: # probably better off using the HTML help feature.
ladanyi@1: 
ladanyi@1: GENERATE_TREEVIEW      = YES
ladanyi@1: 
ladanyi@1: # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
ladanyi@1: # used to set the initial width (in pixels) of the frame in which the tree 
ladanyi@1: # is shown.
ladanyi@1: 
ladanyi@1: TREEVIEW_WIDTH         = 250
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # configuration options related to the LaTeX output
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
ladanyi@1: # generate Latex output.
ladanyi@1: 
ladanyi@1: GENERATE_LATEX         = NO
ladanyi@1: 
ladanyi@1: # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
ladanyi@1: # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
ladanyi@1: # put in front of it. If left blank `latex' will be used as the default path.
ladanyi@1: 
ladanyi@1: LATEX_OUTPUT           = latex
ladanyi@1: 
ladanyi@1: # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 
ladanyi@1: # invoked. If left blank `latex' will be used as the default command name.
ladanyi@1: 
ladanyi@1: LATEX_CMD_NAME         = latex
ladanyi@1: 
ladanyi@1: # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
ladanyi@1: # generate index for LaTeX. If left blank `makeindex' will be used as the 
ladanyi@1: # default command name.
ladanyi@1: 
ladanyi@1: MAKEINDEX_CMD_NAME     = makeindex
ladanyi@1: 
ladanyi@1: # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
ladanyi@1: # LaTeX documents. This may be useful for small projects and may help to 
ladanyi@1: # save some trees in general.
ladanyi@1: 
ladanyi@1: COMPACT_LATEX          = YES
ladanyi@1: 
ladanyi@1: # The PAPER_TYPE tag can be used to set the paper type that is used 
ladanyi@1: # by the printer. Possible values are: a4, a4wide, letter, legal and 
ladanyi@1: # executive. If left blank a4wide will be used.
ladanyi@1: 
ladanyi@1: PAPER_TYPE             = a4wide
ladanyi@1: 
ladanyi@1: # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
ladanyi@1: # packages that should be included in the LaTeX output.
ladanyi@1: 
ladanyi@1: EXTRA_PACKAGES         = amsmath \
ladanyi@1:                          amssymb
ladanyi@1: 
ladanyi@1: # The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
ladanyi@1: # the generated latex document. The header should contain everything until 
ladanyi@1: # the first chapter. If it is left blank doxygen will generate a 
ladanyi@1: # standard header. Notice: only use this tag if you know what you are doing!
ladanyi@1: 
ladanyi@1: LATEX_HEADER           = 
ladanyi@1: 
ladanyi@1: # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
ladanyi@1: # is prepared for conversion to pdf (using ps2pdf). The pdf file will 
ladanyi@1: # contain links (just like the HTML output) instead of page references 
ladanyi@1: # This makes the output suitable for online browsing using a pdf viewer.
ladanyi@1: 
ladanyi@1: PDF_HYPERLINKS         = YES
ladanyi@1: 
ladanyi@1: # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
ladanyi@1: # plain latex in the generated Makefile. Set this option to YES to get a 
ladanyi@1: # higher quality PDF documentation.
ladanyi@1: 
ladanyi@1: USE_PDFLATEX           = YES
ladanyi@1: 
ladanyi@1: # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
ladanyi@1: # command to the generated LaTeX files. This will instruct LaTeX to keep 
ladanyi@1: # running if errors occur, instead of asking the user for help. 
ladanyi@1: # This option is also used when generating formulas in HTML.
ladanyi@1: 
ladanyi@1: LATEX_BATCHMODE        = NO
ladanyi@1: 
ladanyi@1: # If LATEX_HIDE_INDICES is set to YES then doxygen will not 
ladanyi@1: # include the index chapters (such as File Index, Compound Index, etc.) 
ladanyi@1: # in the output.
ladanyi@1: 
ladanyi@1: LATEX_HIDE_INDICES     = NO
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # configuration options related to the RTF output
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
ladanyi@1: # The RTF output is optimized for Word 97 and may not look very pretty with 
ladanyi@1: # other RTF readers or editors.
ladanyi@1: 
ladanyi@1: GENERATE_RTF           = NO
ladanyi@1: 
ladanyi@1: # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
ladanyi@1: # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
ladanyi@1: # put in front of it. If left blank `rtf' will be used as the default path.
ladanyi@1: 
ladanyi@1: RTF_OUTPUT             = rtf
ladanyi@1: 
ladanyi@1: # If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
ladanyi@1: # RTF documents. This may be useful for small projects and may help to 
ladanyi@1: # save some trees in general.
ladanyi@1: 
ladanyi@1: COMPACT_RTF            = NO
ladanyi@1: 
ladanyi@1: # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
ladanyi@1: # will contain hyperlink fields. The RTF file will 
ladanyi@1: # contain links (just like the HTML output) instead of page references. 
ladanyi@1: # This makes the output suitable for online browsing using WORD or other 
ladanyi@1: # programs which support those fields. 
ladanyi@1: # Note: wordpad (write) and others do not support links.
ladanyi@1: 
ladanyi@1: RTF_HYPERLINKS         = NO
ladanyi@1: 
ladanyi@1: # Load stylesheet definitions from file. Syntax is similar to doxygen's 
ladanyi@1: # config file, i.e. a series of assignments. You only have to provide 
ladanyi@1: # replacements, missing definitions are set to their default value.
ladanyi@1: 
ladanyi@1: RTF_STYLESHEET_FILE    = 
ladanyi@1: 
ladanyi@1: # Set optional variables used in the generation of an rtf document. 
ladanyi@1: # Syntax is similar to doxygen's config file.
ladanyi@1: 
ladanyi@1: RTF_EXTENSIONS_FILE    = 
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # configuration options related to the man page output
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
ladanyi@1: # generate man pages
ladanyi@1: 
ladanyi@1: GENERATE_MAN           = NO
ladanyi@1: 
ladanyi@1: # The MAN_OUTPUT tag is used to specify where the man pages will be put. 
ladanyi@1: # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
ladanyi@1: # put in front of it. If left blank `man' will be used as the default path.
ladanyi@1: 
ladanyi@1: MAN_OUTPUT             = man
ladanyi@1: 
ladanyi@1: # The MAN_EXTENSION tag determines the extension that is added to 
ladanyi@1: # the generated man pages (default is the subroutine's section .3)
ladanyi@1: 
ladanyi@1: MAN_EXTENSION          = .3
ladanyi@1: 
ladanyi@1: # If the MAN_LINKS tag is set to YES and Doxygen generates man output, 
ladanyi@1: # then it will generate one additional man file for each entity 
ladanyi@1: # documented in the real man page(s). These additional files 
ladanyi@1: # only source the real man page, but without them the man command 
ladanyi@1: # would be unable to find the correct page. The default is NO.
ladanyi@1: 
ladanyi@1: MAN_LINKS              = NO
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # configuration options related to the XML output
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # If the GENERATE_XML tag is set to YES Doxygen will 
ladanyi@1: # generate an XML file that captures the structure of 
ladanyi@1: # the code including all documentation.
ladanyi@1: 
ladanyi@1: GENERATE_XML           = NO
ladanyi@1: 
ladanyi@1: # The XML_OUTPUT tag is used to specify where the XML pages will be put. 
ladanyi@1: # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
ladanyi@1: # put in front of it. If left blank `xml' will be used as the default path.
ladanyi@1: 
ladanyi@1: XML_OUTPUT             = xml
ladanyi@1: 
ladanyi@1: # The XML_SCHEMA tag can be used to specify an XML schema, 
ladanyi@1: # which can be used by a validating XML parser to check the 
ladanyi@1: # syntax of the XML files.
ladanyi@1: 
ladanyi@1: XML_SCHEMA             = 
ladanyi@1: 
ladanyi@1: # The XML_DTD tag can be used to specify an XML DTD, 
ladanyi@1: # which can be used by a validating XML parser to check the 
ladanyi@1: # syntax of the XML files.
ladanyi@1: 
ladanyi@1: XML_DTD                = 
ladanyi@1: 
ladanyi@1: # If the XML_PROGRAMLISTING tag is set to YES Doxygen will 
ladanyi@1: # dump the program listings (including syntax highlighting 
ladanyi@1: # and cross-referencing information) to the XML output. Note that 
ladanyi@1: # enabling this will significantly increase the size of the XML output.
ladanyi@1: 
ladanyi@1: XML_PROGRAMLISTING     = YES
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # configuration options for the AutoGen Definitions output
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 
ladanyi@1: # generate an AutoGen Definitions (see autogen.sf.net) file 
ladanyi@1: # that captures the structure of the code including all 
ladanyi@1: # documentation. Note that this feature is still experimental 
ladanyi@1: # and incomplete at the moment.
ladanyi@1: 
ladanyi@1: GENERATE_AUTOGEN_DEF   = NO
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # configuration options related to the Perl module output
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # If the GENERATE_PERLMOD tag is set to YES Doxygen will 
ladanyi@1: # generate a Perl module file that captures the structure of 
ladanyi@1: # the code including all documentation. Note that this 
ladanyi@1: # feature is still experimental and incomplete at the 
ladanyi@1: # moment.
ladanyi@1: 
ladanyi@1: GENERATE_PERLMOD       = NO
ladanyi@1: 
ladanyi@1: # If the PERLMOD_LATEX tag is set to YES Doxygen will generate 
ladanyi@1: # the necessary Makefile rules, Perl scripts and LaTeX code to be able 
ladanyi@1: # to generate PDF and DVI output from the Perl module output.
ladanyi@1: 
ladanyi@1: PERLMOD_LATEX          = NO
ladanyi@1: 
ladanyi@1: # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 
ladanyi@1: # nicely formatted so it can be parsed by a human reader.  This is useful 
ladanyi@1: # if you want to understand what is going on.  On the other hand, if this 
ladanyi@1: # tag is set to NO the size of the Perl module output will be much smaller 
ladanyi@1: # and Perl will parse it just the same.
ladanyi@1: 
ladanyi@1: PERLMOD_PRETTY         = YES
ladanyi@1: 
ladanyi@1: # The names of the make variables in the generated doxyrules.make file 
ladanyi@1: # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 
ladanyi@1: # This is useful so different doxyrules.make files included by the same 
ladanyi@1: # Makefile don't overwrite each other's variables.
ladanyi@1: 
ladanyi@1: PERLMOD_MAKEVAR_PREFIX = 
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # Configuration options related to the preprocessor   
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 
ladanyi@1: # evaluate all C-preprocessor directives found in the sources and include 
ladanyi@1: # files.
ladanyi@1: 
ladanyi@1: ENABLE_PREPROCESSING   = YES
ladanyi@1: 
ladanyi@1: # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 
ladanyi@1: # names in the source code. If set to NO (the default) only conditional 
ladanyi@1: # compilation will be performed. Macro expansion can be done in a controlled 
ladanyi@1: # way by setting EXPAND_ONLY_PREDEF to YES.
ladanyi@1: 
ladanyi@1: MACRO_EXPANSION        = NO
ladanyi@1: 
ladanyi@1: # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 
ladanyi@1: # then the macro expansion is limited to the macros specified with the 
ladanyi@1: # PREDEFINED and EXPAND_AS_PREDEFINED tags.
ladanyi@1: 
ladanyi@1: EXPAND_ONLY_PREDEF     = NO
ladanyi@1: 
ladanyi@1: # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 
ladanyi@1: # in the INCLUDE_PATH (see below) will be search if a #include is found.
ladanyi@1: 
ladanyi@1: SEARCH_INCLUDES        = YES
ladanyi@1: 
ladanyi@1: # The INCLUDE_PATH tag can be used to specify one or more directories that 
ladanyi@1: # contain include files that are not input files but should be processed by 
ladanyi@1: # the preprocessor.
ladanyi@1: 
ladanyi@1: INCLUDE_PATH           = 
ladanyi@1: 
ladanyi@1: # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
ladanyi@1: # patterns (like *.h and *.hpp) to filter out the header-files in the 
ladanyi@1: # directories. If left blank, the patterns specified with FILE_PATTERNS will 
ladanyi@1: # be used.
ladanyi@1: 
ladanyi@1: INCLUDE_FILE_PATTERNS  = 
ladanyi@1: 
ladanyi@1: # The PREDEFINED tag can be used to specify one or more macro names that 
ladanyi@1: # are defined before the preprocessor is started (similar to the -D option of 
ladanyi@1: # gcc). The argument of the tag is a list of macros of the form: name 
ladanyi@1: # or name=definition (no spaces). If the definition and the = are 
ladanyi@1: # omitted =1 is assumed. To prevent a macro definition from being 
ladanyi@1: # undefined via #undef or recursively expanded use the := operator 
ladanyi@1: # instead of the = operator.
ladanyi@1: 
ladanyi@1: PREDEFINED             = DOXYGEN
ladanyi@1: 
ladanyi@1: # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
ladanyi@1: # this tag can be used to specify a list of macro names that should be expanded. 
ladanyi@1: # The macro definition that is found in the sources will be used. 
ladanyi@1: # Use the PREDEFINED tag if you want to use a different macro definition.
ladanyi@1: 
ladanyi@1: EXPAND_AS_DEFINED      = 
ladanyi@1: 
ladanyi@1: # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 
ladanyi@1: # doxygen's preprocessor will remove all function-like macros that are alone 
ladanyi@1: # on a line, have an all uppercase name, and do not end with a semicolon. Such 
ladanyi@1: # function macros are typically used for boiler-plate code, and will confuse 
ladanyi@1: # the parser if not removed.
ladanyi@1: 
ladanyi@1: SKIP_FUNCTION_MACROS   = YES
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # Configuration::additions related to external references   
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # The TAGFILES option can be used to specify one or more tagfiles. 
ladanyi@1: # Optionally an initial location of the external documentation 
ladanyi@1: # can be added for each tagfile. The format of a tag file without 
ladanyi@1: # this location is as follows: 
ladanyi@1: #   TAGFILES = file1 file2 ... 
ladanyi@1: # Adding location for the tag files is done as follows: 
ladanyi@1: #   TAGFILES = file1=loc1 "file2 = loc2" ... 
ladanyi@1: # where "loc1" and "loc2" can be relative or absolute paths or 
ladanyi@1: # URLs. If a location is present for each tag, the installdox tool 
ladanyi@1: # does not have to be run to correct the links.
ladanyi@1: # Note that each tag file must have a unique name
ladanyi@1: # (where the name does NOT include the path)
ladanyi@1: # If a tag file is not located in the directory in which doxygen 
ladanyi@1: # is run, you must also specify the path to the tagfile here.
ladanyi@1: 
ladanyi@1: TAGFILES               = "@abs_top_srcdir@/doc/libstdc++.tag = http://gcc.gnu.org/onlinedocs/libstdc++/latest-doxygen/"
ladanyi@1: 
ladanyi@1: # When a file name is specified after GENERATE_TAGFILE, doxygen will create 
ladanyi@1: # a tag file that is based on the input files it reads.
ladanyi@1: 
ladanyi@1: GENERATE_TAGFILE       = html/lemon.tag
ladanyi@1: 
ladanyi@1: # If the ALLEXTERNALS tag is set to YES all external classes will be listed 
ladanyi@1: # in the class index. If set to NO only the inherited external classes 
ladanyi@1: # will be listed.
ladanyi@1: 
ladanyi@1: ALLEXTERNALS           = NO
ladanyi@1: 
ladanyi@1: # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 
ladanyi@1: # in the modules index. If set to NO, only the current project's groups will 
ladanyi@1: # be listed.
ladanyi@1: 
ladanyi@1: EXTERNAL_GROUPS        = NO
ladanyi@1: 
ladanyi@1: # The PERL_PATH should be the absolute path and name of the perl script 
ladanyi@1: # interpreter (i.e. the result of `which perl').
ladanyi@1: 
ladanyi@1: PERL_PATH              = /usr/bin/perl
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # Configuration options related to the dot tool   
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
ladanyi@1: # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base 
ladanyi@1: # or super classes. Setting the tag to NO turns the diagrams off. Note that 
ladanyi@1: # this option is superseded by the HAVE_DOT option below. This is only a 
ladanyi@1: # fallback. It is recommended to install and use dot, since it yields more 
ladanyi@1: # powerful graphs.
ladanyi@1: 
ladanyi@1: CLASS_DIAGRAMS         = NO
ladanyi@1: 
ladanyi@1: # If set to YES, the inheritance and collaboration graphs will hide 
ladanyi@1: # inheritance and usage relations if the target is undocumented 
ladanyi@1: # or is not a class.
ladanyi@1: 
ladanyi@1: HIDE_UNDOC_RELATIONS   = YES
ladanyi@1: 
ladanyi@1: # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
ladanyi@1: # available from the path. This tool is part of Graphviz, a graph visualization 
ladanyi@1: # toolkit from AT&T and Lucent Bell Labs. The other options in this section 
ladanyi@1: # have no effect if this option is set to NO (the default)
ladanyi@1: 
ladanyi@1: HAVE_DOT               = YES
ladanyi@1: 
ladanyi@1: # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
ladanyi@1: # will generate a graph for each documented class showing the direct and 
ladanyi@1: # indirect inheritance relations. Setting this tag to YES will force the 
ladanyi@1: # the CLASS_DIAGRAMS tag to NO.
ladanyi@1: 
ladanyi@1: CLASS_GRAPH            = YES
ladanyi@1: 
ladanyi@1: # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 
ladanyi@1: # will generate a graph for each documented class showing the direct and 
ladanyi@1: # indirect implementation dependencies (inheritance, containment, and 
ladanyi@1: # class references variables) of the class with other documented classes.
ladanyi@1: 
ladanyi@1: COLLABORATION_GRAPH    = NO
ladanyi@1: 
ladanyi@1: # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen 
ladanyi@1: # will generate a graph for groups, showing the direct groups dependencies
ladanyi@1: 
ladanyi@1: GROUP_GRAPHS           = NO
ladanyi@1: 
ladanyi@1: # If the UML_LOOK tag is set to YES doxygen will generate inheritance and 
ladanyi@1: # collaboration diagrams in a style similar to the OMG's Unified Modeling 
ladanyi@1: # Language.
ladanyi@1: 
ladanyi@1: UML_LOOK               = NO
ladanyi@1: 
ladanyi@1: # If set to YES, the inheritance and collaboration graphs will show the 
ladanyi@1: # relations between templates and their instances.
ladanyi@1: 
ladanyi@1: TEMPLATE_RELATIONS     = NO
ladanyi@1: 
ladanyi@1: # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 
ladanyi@1: # tags are set to YES then doxygen will generate a graph for each documented 
ladanyi@1: # file showing the direct and indirect include dependencies of the file with 
ladanyi@1: # other documented files.
ladanyi@1: 
ladanyi@1: INCLUDE_GRAPH          = NO
ladanyi@1: 
ladanyi@1: # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 
ladanyi@1: # HAVE_DOT tags are set to YES then doxygen will generate a graph for each 
ladanyi@1: # documented header file showing the documented files that directly or 
ladanyi@1: # indirectly include this file.
ladanyi@1: 
ladanyi@1: INCLUDED_BY_GRAPH      = NO
ladanyi@1: 
ladanyi@1: # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will 
ladanyi@1: # generate a call dependency graph for every global function or class method. 
ladanyi@1: # Note that enabling this option will significantly increase the time of a run. 
ladanyi@1: # So in most cases it will be better to enable call graphs for selected 
ladanyi@1: # functions only using the \callgraph command.
ladanyi@1: 
ladanyi@1: CALL_GRAPH             = NO
ladanyi@1: 
ladanyi@1: # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 
ladanyi@1: # will graphical hierarchy of all classes instead of a textual one.
ladanyi@1: 
ladanyi@1: GRAPHICAL_HIERARCHY    = NO
ladanyi@1: 
ladanyi@1: # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES 
ladanyi@1: # then doxygen will show the dependencies a directory has on other directories 
ladanyi@1: # in a graphical way. The dependency relations are determined by the #include
ladanyi@1: # relations between the files in the directories.
ladanyi@1: 
ladanyi@1: DIRECTORY_GRAPH        = NO
ladanyi@1: 
ladanyi@1: # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
ladanyi@1: # generated by dot. Possible values are png, jpg, or gif
ladanyi@1: # If left blank png will be used.
ladanyi@1: 
ladanyi@1: DOT_IMAGE_FORMAT       = png
ladanyi@1: 
ladanyi@1: # The tag DOT_PATH can be used to specify the path where the dot tool can be 
ladanyi@1: # found. If left blank, it is assumed the dot tool can be found in the path.
ladanyi@1: 
ladanyi@1: DOT_PATH               = 
ladanyi@1: 
ladanyi@1: # The DOTFILE_DIRS tag can be used to specify one or more directories that 
ladanyi@1: # contain dot files that are included in the documentation (see the 
ladanyi@1: # \dotfile command).
ladanyi@1: 
ladanyi@1: DOTFILE_DIRS           = 
ladanyi@1: 
ladanyi@1: # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width 
ladanyi@1: # (in pixels) of the graphs generated by dot. If a graph becomes larger than 
ladanyi@1: # this value, doxygen will try to truncate the graph, so that it fits within 
ladanyi@1: # the specified constraint. Beware that most browsers cannot cope with very 
ladanyi@1: # large images.
ladanyi@1: 
ladanyi@1: MAX_DOT_GRAPH_WIDTH    = 1024
ladanyi@1: 
ladanyi@1: # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height 
ladanyi@1: # (in pixels) of the graphs generated by dot. If a graph becomes larger than 
ladanyi@1: # this value, doxygen will try to truncate the graph, so that it fits within 
ladanyi@1: # the specified constraint. Beware that most browsers cannot cope with very 
ladanyi@1: # large images.
ladanyi@1: 
ladanyi@1: MAX_DOT_GRAPH_HEIGHT   = 1024
ladanyi@1: 
ladanyi@1: # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
ladanyi@1: # graphs generated by dot. A depth value of 3 means that only nodes reachable 
ladanyi@1: # from the root by following a path via at most 3 edges will be shown. Nodes 
ladanyi@1: # that lay further from the root node will be omitted. Note that setting this 
ladanyi@1: # option to 1 or 2 may greatly reduce the computation time needed for large 
ladanyi@1: # code bases. Also note that a graph may be further truncated if the graph's 
ladanyi@1: # image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH 
ladanyi@1: # and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), 
ladanyi@1: # the graph is not depth-constrained.
ladanyi@1: 
ladanyi@1: MAX_DOT_GRAPH_DEPTH    = 0
ladanyi@1: 
ladanyi@1: # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent 
ladanyi@1: # background. This is disabled by default, which results in a white background. 
ladanyi@1: # Warning: Depending on the platform used, enabling this option may lead to 
ladanyi@1: # badly anti-aliased labels on the edges of a graph (i.e. they become hard to 
ladanyi@1: # read).
ladanyi@1: 
ladanyi@1: DOT_TRANSPARENT        = NO
ladanyi@1: 
ladanyi@1: # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output 
ladanyi@1: # files in one run (i.e. multiple -o and -T options on the command line). This 
ladanyi@1: # makes dot run faster, but since only newer versions of dot (>1.8.10) 
ladanyi@1: # support this, this feature is disabled by default.
ladanyi@1: 
ladanyi@1: DOT_MULTI_TARGETS      = NO
ladanyi@1: 
ladanyi@1: # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 
ladanyi@1: # generate a legend page explaining the meaning of the various boxes and 
ladanyi@1: # arrows in the dot generated graphs.
ladanyi@1: 
ladanyi@1: GENERATE_LEGEND        = YES
ladanyi@1: 
ladanyi@1: # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 
ladanyi@1: # remove the intermediate dot files that are used to generate 
ladanyi@1: # the various graphs.
ladanyi@1: 
ladanyi@1: DOT_CLEANUP            = YES
ladanyi@1: 
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: # Configuration::additions related to the search engine   
ladanyi@1: #---------------------------------------------------------------------------
ladanyi@1: 
ladanyi@1: # The SEARCHENGINE tag specifies whether or not a search engine should be 
ladanyi@1: # used. If set to NO the values of all tags below this one will be ignored.
ladanyi@1: 
ladanyi@1: SEARCHENGINE           = NO