diff --git a/.hgignore b/.hgignore --- a/.hgignore +++ b/.hgignore @@ -7,6 +7,7 @@ *.log *.lo *.tar.* +*.bak Makefile.in aclocal.m4 config.h.in @@ -25,6 +26,7 @@ .libs/* .deps/* demo/*.eps +doc/images/*.png syntax: regexp (.*/)?\#[^/]*\#$ diff --git a/configure.ac b/configure.ac --- a/configure.ac +++ b/configure.ac @@ -27,6 +27,7 @@ AC_PROG_LIBTOOL AC_CHECK_PROG([doxygen_found],[doxygen],[yes],[no]) +AC_CHECK_PROG([gs_found],[gs],[yes],[no]) if test x"$lx_cmdline_cxxflags_set" != x"set" -a "$GXX" = yes; then CXXFLAGS="$CXXFLAGS -Wall -W -Wall -W -Wunused -Wformat=2 -Wctor-dtor-privacy -Wnon-virtual-dtor -Wno-char-subscripts -Wwrite-strings -Wno-char-subscripts -Wreturn-type -Wcast-qual -Wcast-align -Wsign-promo -Woverloaded-virtual -Woverloaded-virtual -ansi -fno-strict-aliasing -Wold-style-cast -Wno-unknown-pragmas" diff --git a/doc/Doxyfile.in b/doc/Doxyfile.in --- a/doc/Doxyfile.in +++ b/doc/Doxyfile.in @@ -1,455 +1,85 @@ -# Doxyfile 1.4.2 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project -# -# All text after a hash (#) is considered a comment and will be ignored -# The format is: -# TAG = value [value, ...] -# For lists items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" ") +# Doxyfile 1.5.5 #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded -# by quotes) that should identify the project. - +DOXYFILE_ENCODING = UTF-8 PROJECT_NAME = @PACKAGE_NAME@ - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or -# if some version control system is used. - PROJECT_NUMBER = @PACKAGE_VERSION@ - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location -# where doxygen was started. If left blank the current directory will be used. - OUTPUT_DIRECTORY = - -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would -# otherwise cause performance problems for the file system. - CREATE_SUBDIRS = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, -# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, -# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, -# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, -# Swedish, and Ukrainian. - OUTPUT_LANGUAGE = English - -# This tag can be used to specify the encoding used in the generated output. -# The encoding is not always determined by the language that is chosen, -# but also whether or not the output is meant for Windows or non-Windows users. -# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES -# forces the Windows encoding (this is the default for the Windows binary), -# whereas setting the tag to NO uses a Unix-style encoding (the default for -# all platforms other than Windows). - -USE_WINDOWS_ENCODING = NO - -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. - BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. - REPEAT_BRIEF = NO - -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" -# "represents" "a" "an" "the" - ABBREVIATE_BRIEF = - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief -# description. - ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. - INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. - FULL_PATH_NAMES = YES - -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the -# path to strip. - STRIP_FROM_PATH = @abs_top_srcdir@ - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that -# are normally passed to the compiler using the -I flag. - STRIP_FROM_INC_PATH = @abs_top_srcdir@ - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful is your file systems -# doesn't support long names like on DOS, Mac, or CD-ROM. - SHORT_NAMES = YES - -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like the Qt-style comments (thus requiring an -# explicit @brief command for a brief description. - JAVADOC_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed -# description. Set this tag to YES if you prefer the old behaviour instead. - +QT_AUTOBRIEF = NO MULTILINE_CPP_IS_BRIEF = NO - -# If the DETAILS_AT_TOP tag is set to YES then Doxygen -# will output the detailed description near the top, like JavaDoc. -# If set to NO, the detailed description appears after the member -# documentation. - DETAILS_AT_TOP = YES - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# re-implements. - INHERIT_DOCS = NO - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. - +SEPARATE_MEMBER_PAGES = NO +TAB_SIZE = 8 +ALIASES = +OPTIMIZE_OUTPUT_FOR_C = NO +OPTIMIZE_OUTPUT_JAVA = NO +OPTIMIZE_FOR_FORTRAN = NO +OPTIMIZE_OUTPUT_VHDL = NO +BUILTIN_STL_SUPPORT = YES +CPP_CLI_SUPPORT = NO +SIP_SUPPORT = NO DISTRIBUTE_GROUP_DOC = NO - -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will -# be part of the file/class/namespace that contains it. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. - -TAB_SIZE = 8 - -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. - -ALIASES = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list -# of all members will be omitted, etc. - -OPTIMIZE_OUTPUT_FOR_C = NO - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources -# only. Doxygen will then generate output that is more tailored for Java. -# For instance, namespaces will be presented as packages, qualified scopes -# will look different, etc. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using -# the \nosubgrouping command. - SUBGROUPING = YES - +TYPEDEF_HIDES_STRUCT = NO #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES - EXTRACT_ALL = NO - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class -# will be included in the documentation. - EXTRACT_PRIVATE = YES - -# If the EXTRACT_STATIC tag is set to YES all static members of a file -# will be included in the documentation. - EXTRACT_STATIC = YES - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. -# If set to NO only classes defined in header files are included. - EXTRACT_LOCAL_CLASSES = NO - -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. -# If set to NO (the default) only methods in the interface are included. - EXTRACT_LOCAL_METHODS = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. -# This option has no effect if EXTRACT_ALL is enabled. - +EXTRACT_ANON_NSPACES = NO HIDE_UNDOC_MEMBERS = YES - -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various -# overviews. This option has no effect if EXTRACT_ALL is enabled. - HIDE_UNDOC_CLASSES = YES - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the -# documentation. - HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the -# function's detailed documentation block. - HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. -# Set it to YES to include the internal documentation. - -INTERNAL_DOCS = @DOXYGEN_INTERNAL_DOCS@ - -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. - +INTERNAL_DOCS = NO CASE_SENSE_NAMES = YES - -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the -# documentation. If set to YES the scope will be hidden. - HIDE_SCOPE_NAMES = YES - -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation -# of that file. - SHOW_INCLUDE_FILES = YES - -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] -# is inserted in the documentation for inline members. - INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in -# declaration order. - SORT_MEMBER_DOCS = NO - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in -# declaration order. - SORT_BRIEF_DOCS = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the -# alphabetical list. - +SORT_GROUP_NAMES = NO SORT_BY_SCOPE_NAME = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo -# commands in the documentation. - GENERATE_TODOLIST = YES - -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test -# commands in the documentation. - GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug -# commands in the documentation. - GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting -# \deprecated commands in the documentation. - GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. - ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or define consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and defines in the -# documentation can be controlled using \showinitializer or \hideinitializer -# command in the documentation regardless of this setting. - MAX_INITIALIZER_LINES = 5 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the -# list will mention the files that were used to generate the documentation. - SHOW_USED_FILES = YES - -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. - SHOW_DIRECTORIES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from the -# version control system). Doxygen will invoke the program by executing (via -# popen()) the command , where is the value of -# the FILE_VERSION_FILTER tag, and is the name of an input file -# provided by doxygen. Whatever the progam writes to standard output -# is used as the file version. See the manual for examples. - FILE_VERSION_FILTER = - #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated -# by doxygen. Possible values are YES and NO. If left blank NO is used. - QUIET = NO - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank -# NO is used. - WARNINGS = YES - -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will -# automatically be disabled. - WARN_IF_UNDOCUMENTED = YES - -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that -# don't exist or using markup commands wrongly. - WARN_IF_DOC_ERROR = YES - -# This WARN_NO_PARAMDOC option can be abled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of -# documentation. - WARN_NO_PARAMDOC = NO - -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could -# be obtained via FILE_VERSION_FILTER) - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written -# to stderr. - +WARN_FORMAT = "$file:$line: $text " WARN_LOGFILE = doxygen.log - #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- - -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories -# with spaces. - INPUT = @abs_top_srcdir@/doc \ @abs_top_srcdir@/lemon \ @abs_top_srcdir@/lemon/bits \ @@ -457,771 +87,165 @@ @abs_top_srcdir@/demo \ @abs_top_srcdir@/tools \ @abs_top_srcdir@/test/test_tools.h - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx -# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm - -FILE_PATTERNS = *.h *.cc *.dox - -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. -# If left blank NO is used. - +INPUT_ENCODING = UTF-8 +FILE_PATTERNS = *.h \ + *.cc \ + *.dox RECURSIVE = NO - -# The EXCLUDE tag can be used to specify files and/or directories that should -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. - EXCLUDE = - -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or -# directories that are symbolic links (a Unix filesystem feature) are excluded -# from the input. - EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. - EXCLUDE_PATTERNS = - -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see -# the \include command). - +EXCLUDE_SYMBOLS = EXAMPLE_PATH = @abs_top_srcdir@/demo \ @abs_top_srcdir@/LICENSE \ @abs_top_srcdir@/doc - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank all files are included. - EXAMPLE_PATTERNS = - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. -# Possible values are YES and NO. If left blank NO is used. - EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see -# the \image command). - -IMAGE_PATH = @abs_top_srcdir@/doc/images - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command , where -# is the value of the INPUT_FILTER tag, and is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. If FILTER_PATTERNS is specified, this tag will be -# ignored. - +IMAGE_PATH = @abs_top_srcdir@/doc/images \ + @abs_top_builddir@/doc/gen-images INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER -# is applied to all files. - FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source -# files to browse (i.e. when SOURCE_BROWSER is set to YES). - FILTER_SOURCE_FILES = NO - #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. - SOURCE_BROWSER = NO - -# Setting the INLINE_SOURCES tag to YES will include the body -# of functions and classes directly in the documentation. - INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. - STRIP_CODE_COMMENTS = YES - -# If the REFERENCED_BY_RELATION tag is set to YES (the default) -# then for each documented function all documented -# functions referencing it will be listed. - REFERENCED_BY_RELATION = NO - -# If the REFERENCES_RELATION tag is set to YES (the default) -# then for each documented function all documented entities -# called/used by that function will be listed. - REFERENCES_RELATION = NO - -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. - +REFERENCES_LINK_SOURCE = YES +USE_HTAGS = NO VERBATIM_HEADERS = NO - #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project -# contains a lot of classes, structs, unions or interfaces. - ALPHABETICAL_INDEX = YES - -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns -# in which this list will be split (can be a number in the range [1..20]) - COLS_IN_ALPHA_INDEX = 2 - -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that -# should be ignored while generating the index headers. - IGNORE_PREFIX = - #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will -# generate HTML output. - GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `html' will be used as the default path. - HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank -# doxygen will generate files with .html extension. - HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. - HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. - HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# stylesheet in the HTML output directory as well, or it will be erased! - HTML_STYLESHEET = - -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - HTML_ALIGN_MEMBERS = YES - -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) -# of the generated HTML documentation. - GENERATE_HTMLHELP = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be -# written to the html output directory. - +GENERATE_DOCSET = NO +DOCSET_FEEDNAME = "Doxygen generated docs" +DOCSET_BUNDLE_ID = org.doxygen.Project +HTML_DYNAMIC_SECTIONS = NO CHM_FILE = - -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run -# the HTML help compiler on the generated index.hhp. - HHC_LOCATION = - -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that -# it should be included in the master .chm file (NO). - GENERATE_CHI = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a -# normal table of contents (NO) in the .chm file. - BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the HTML help documentation and to the tree view. - TOC_EXPAND = NO - -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. - DISABLE_INDEX = NO - -# This tag can be used to set the number of enum values (range [1..20]) -# that doxygen will group on one line in the generated HTML documentation. - ENUM_VALUES_PER_LINE = 4 - -# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be -# generated containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, -# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are -# probably better off using the HTML help feature. - GENERATE_TREEVIEW = YES - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree -# is shown. - TREEVIEW_WIDTH = 250 - #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will -# generate Latex output. - GENERATE_LATEX = NO - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. - LATEX_OUTPUT = latex - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. - LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. - MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. - COMPACT_LATEX = YES - -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, a4wide, letter, legal and -# executive. If left blank a4wide will be used. - PAPER_TYPE = a4wide - -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. - EXTRA_PACKAGES = amsmath \ amssymb - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! - LATEX_HEADER = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. - PDF_HYPERLINKS = YES - -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a -# higher quality PDF documentation. - USE_PDFLATEX = YES - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. - LATEX_BATCHMODE = NO - -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) -# in the output. - LATEX_HIDE_INDICES = NO - #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with -# other RTF readers or editors. - GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `rtf' will be used as the default path. - RTF_OUTPUT = rtf - -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to -# save some trees in general. - COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. -# Note: wordpad (write) and others do not support links. - RTF_HYPERLINKS = NO - -# Load stylesheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide -# replacements, missing definitions are set to their default value. - RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an rtf document. -# Syntax is similar to doxygen's config file. - RTF_EXTENSIONS_FILE = - #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will -# generate man pages - GENERATE_MAN = NO - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `man' will be used as the default path. - MAN_OUTPUT = man - -# The MAN_EXTENSION tag determines the extension that is added to -# the generated man pages (default is the subroutine's section .3) - MAN_EXTENSION = .3 - -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command -# would be unable to find the correct page. The default is NO. - MAN_LINKS = NO - #--------------------------------------------------------------------------- # configuration options related to the XML output #--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of -# the code including all documentation. - GENERATE_XML = NO - -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `xml' will be used as the default path. - XML_OUTPUT = xml - -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - XML_SCHEMA = - -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - XML_DTD = - -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that -# enabling this will significantly increase the size of the XML output. - XML_PROGRAMLISTING = YES - #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental -# and incomplete at the moment. - GENERATE_AUTOGEN_DEF = NO - #--------------------------------------------------------------------------- # configuration options related to the Perl module output #--------------------------------------------------------------------------- - -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. - GENERATE_PERLMOD = NO - -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able -# to generate PDF and DVI output from the Perl module output. - PERLMOD_LATEX = NO - -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. This is useful -# if you want to understand what is going on. On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller -# and Perl will parse it just the same. - PERLMOD_PRETTY = YES - -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same -# Makefile don't overwrite each other's variables. - PERLMOD_MAKEVAR_PREFIX = - #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include -# files. - ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled -# way by setting EXPAND_ONLY_PREDEF to YES. - MACRO_EXPANSION = NO - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_PREDEFINED tags. - EXPAND_ONLY_PREDEF = NO - -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# in the INCLUDE_PATH (see below) will be search if a #include is found. - SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by -# the preprocessor. - INCLUDE_PATH = - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will -# be used. - INCLUDE_FILE_PATTERNS = - -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator -# instead of the = operator. - PREDEFINED = DOXYGEN - -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition. - EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all function-like macros that are alone -# on a line, have an all uppercase name, and do not end with a semicolon. Such -# function macros are typically used for boiler-plate code, and will confuse -# the parser if not removed. - SKIP_FUNCTION_MACROS = YES - #--------------------------------------------------------------------------- # Configuration::additions related to external references #--------------------------------------------------------------------------- - -# The TAGFILES option can be used to specify one or more tagfiles. -# Optionally an initial location of the external documentation -# can be added for each tagfile. The format of a tag file without -# this location is as follows: -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths or -# URLs. If a location is present for each tag, the installdox tool -# does not have to be run to correct the links. -# Note that each tag file must have a unique name -# (where the name does NOT include the path) -# If a tag file is not located in the directory in which doxygen -# is run, you must also specify the path to the tagfile here. - -TAGFILES = "@abs_top_srcdir@/doc/libstdc++.tag = http://gcc.gnu.org/onlinedocs/libstdc++/latest-doxygen/" - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create -# a tag file that is based on the input files it reads. - +TAGFILES = "@abs_top_srcdir@/doc/libstdc++.tag = http://gcc.gnu.org/onlinedocs/libstdc++/latest-doxygen/ " GENERATE_TAGFILE = html/lemon.tag - -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes -# will be listed. - ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will -# be listed. - EXTERNAL_GROUPS = NO - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of `which perl'). - PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option is superseded by the HAVE_DOT option below. This is only a -# fallback. It is recommended to install and use dot, since it yields more -# powerful graphs. - CLASS_DIAGRAMS = NO - -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented -# or is not a class. - +MSCGEN_PATH = HIDE_UNDOC_RELATIONS = YES - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section -# have no effect if this option is set to NO (the default) - HAVE_DOT = YES - -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# the CLASS_DIAGRAMS tag to NO. - CLASS_GRAPH = YES - -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and -# class references variables) of the class with other documented classes. - COLLABORATION_GRAPH = NO - -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for groups, showing the direct groups dependencies - GROUP_GRAPHS = NO - -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling -# Language. - UML_LOOK = NO - -# If set to YES, the inheritance and collaboration graphs will show the -# relations between templates and their instances. - TEMPLATE_RELATIONS = NO - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with -# other documented files. - INCLUDE_GRAPH = NO - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or -# indirectly include this file. - INCLUDED_BY_GRAPH = NO - -# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will -# generate a call dependency graph for every global function or class method. -# Note that enabling this option will significantly increase the time of a run. -# So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. - CALL_GRAPH = NO - -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen -# will graphical hierarchy of all classes instead of a textual one. - +CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO - -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories -# in a graphical way. The dependency relations are determined by the #include -# relations between the files in the directories. - DIRECTORY_GRAPH = NO - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are png, jpg, or gif -# If left blank png will be used. - DOT_IMAGE_FORMAT = png - -# The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found in the path. - DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the -# \dotfile command). - DOTFILE_DIRS = - -# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width -# (in pixels) of the graphs generated by dot. If a graph becomes larger than -# this value, doxygen will try to truncate the graph, so that it fits within -# the specified constraint. Beware that most browsers cannot cope with very -# large images. - -MAX_DOT_GRAPH_WIDTH = 1024 - -# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height -# (in pixels) of the graphs generated by dot. If a graph becomes larger than -# this value, doxygen will try to truncate the graph, so that it fits within -# the specified constraint. Beware that most browsers cannot cope with very -# large images. - -MAX_DOT_GRAPH_HEIGHT = 1024 - -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that a graph may be further truncated if the graph's -# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH -# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), -# the graph is not depth-constrained. - +DOT_GRAPH_MAX_NODES = 50 MAX_DOT_GRAPH_DEPTH = 0 - -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, which results in a white background. -# Warning: Depending on the platform used, enabling this option may lead to -# badly anti-aliased labels on the edges of a graph (i.e. they become hard to -# read). - DOT_TRANSPARENT = NO - -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) -# support this, this feature is disabled by default. - DOT_MULTI_TARGETS = NO - -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and -# arrows in the dot generated graphs. - GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate -# the various graphs. - DOT_CLEANUP = YES - #--------------------------------------------------------------------------- # Configuration::additions related to the search engine #--------------------------------------------------------------------------- - -# The SEARCHENGINE tag specifies whether or not a search engine should be -# used. If set to NO the values of all tags below this one will be ignored. - SEARCHENGINE = NO diff --git a/doc/Makefile.am b/doc/Makefile.am --- a/doc/Makefile.am +++ b/doc/Makefile.am @@ -8,10 +8,38 @@ doc/namespaces.dox \ doc/html +DOC_EPS_IMAGES18 = \ + nodeshape_0.eps \ + nodeshape_1.eps \ + nodeshape_2.eps \ + nodeshape_3.eps \ + nodeshape_4.eps + +DOC_EPS_IMAGES = \ + $(DOC_EPS_IMAGES18) + +DOC_PNG_IMAGES = \ + $(DOC_EPS_IMAGES:%.eps=doc/gen-images/%.png) + +EXTRA_DIST += $(DOC_EPS_IMAGES:%=doc/images/%) + doc/html: $(MAKE) $(AM_MAKEFLAGS) html -html-local: +GS_COMMAND=gs -dNOPAUSE -dBATCH -q -dEPSCrop -dTextAlphaBits=4 -dGraphicsAlphaBits=4 + +$(DOC_EPS_IMAGES18:%.eps=doc/gen-images/%.png): doc/gen-images/%.png: doc/images/%.eps + -mkdir doc/gen-images + if test ${gs_found} = yes; then \ + $(GS_COMMAND) -sDEVICE=pngalpha -r18 -sOutputFile=$@ $<; \ + else \ + echo; \ + echo "Ghostscript not found."; \ + echo; \ + exit 1; \ + fi + +html-local: $(DOC_PNG_IMAGES) if test ${doxygen_found} = yes; then \ cd doc; \ doxygen Doxyfile; \ @@ -26,6 +54,8 @@ clean-local: -rm -rf doc/html -rm -f doc/doxygen.log + -rm -f $(DOC_PNG_IMAGES) + -rm -rf doc/gen-images update-external-tags: wget -O doc/libstdc++.tag.tmp http://gcc.gnu.org/onlinedocs/libstdc++/latest-doxygen/libstdc++.tag && \ diff --git a/doc/images/nodeshape_0.eps b/doc/images/nodeshape_0.eps new file mode 100644 --- /dev/null +++ b/doc/images/nodeshape_0.eps @@ -0,0 +1,57 @@ +%!PS-Adobe-2.0 EPSF-2.0 +%%Title: LEMON GraphToEps figure +%%Creator: LEMON GraphToEps function +%%BoundingBox: 0 0 200 200 +%%EndComments +/lb { setlinewidth setrgbcolor newpath moveto + 4 2 roll 1 index 1 index curveto stroke } bind def +/l { setlinewidth setrgbcolor newpath moveto lineto stroke } bind def +/c { newpath dup 3 index add 2 index moveto 0 360 arc closepath } bind def +/sq { newpath 2 index 1 index add 2 index 2 index add moveto + 2 index 1 index sub 2 index 2 index add lineto + 2 index 1 index sub 2 index 2 index sub lineto + 2 index 1 index add 2 index 2 index sub lineto + closepath pop pop pop} bind def +/di { newpath 2 index 1 index add 2 index moveto + 2 index 2 index 2 index add lineto + 2 index 1 index sub 2 index lineto + 2 index 2 index 2 index sub lineto + closepath pop pop pop} bind def +/nc { 0 0 0 setrgbcolor 5 index 5 index 5 index c fill + setrgbcolor 1.1 div c fill + } bind def +/nsq { 0 0 0 setrgbcolor 5 index 5 index 5 index sq fill + setrgbcolor 1.1 div sq fill + } bind def +/ndi { 0 0 0 setrgbcolor 5 index 5 index 5 index di fill + setrgbcolor 1.1 div di fill + } bind def +/arrl 1 def +/arrw 0.3 def +/lrl { 2 index mul exch 2 index mul exch rlineto pop} bind def +/arr { setrgbcolor /y1 exch def /x1 exch def /dy exch def /dx exch def + /w exch def /len exch def + newpath x1 dy w 2 div mul add y1 dx w 2 div mul sub moveto + len w sub arrl sub dx dy lrl + arrw dy dx neg lrl + dx arrl w add mul dy w 2 div arrw add mul sub + dy arrl w add mul dx w 2 div arrw add mul add rlineto + dx arrl w add mul neg dy w 2 div arrw add mul sub + dy arrl w add mul neg dx w 2 div arrw add mul add rlineto + arrw dy dx neg lrl + len w sub arrl sub neg dx dy lrl + closepath fill } bind def +/cshow { 2 index 2 index moveto dup stringwidth pop + neg 2 div fosi .35 mul neg rmoveto show pop pop} def + +gsave +100 dup scale +%Edges: +gsave +grestore +%Nodes: +gsave +1 1 1 0.2 1 0.2 nc +grestore +grestore +showpage diff --git a/doc/images/nodeshape_1.eps b/doc/images/nodeshape_1.eps new file mode 100644 --- /dev/null +++ b/doc/images/nodeshape_1.eps @@ -0,0 +1,57 @@ +%!PS-Adobe-2.0 EPSF-2.0 +%%Title: LEMON GraphToEps figure +%%Creator: LEMON GraphToEps function +%%BoundingBox: 0 0 200 200 +%%EndComments +/lb { setlinewidth setrgbcolor newpath moveto + 4 2 roll 1 index 1 index curveto stroke } bind def +/l { setlinewidth setrgbcolor newpath moveto lineto stroke } bind def +/c { newpath dup 3 index add 2 index moveto 0 360 arc closepath } bind def +/sq { newpath 2 index 1 index add 2 index 2 index add moveto + 2 index 1 index sub 2 index 2 index add lineto + 2 index 1 index sub 2 index 2 index sub lineto + 2 index 1 index add 2 index 2 index sub lineto + closepath pop pop pop} bind def +/di { newpath 2 index 1 index add 2 index moveto + 2 index 2 index 2 index add lineto + 2 index 1 index sub 2 index lineto + 2 index 2 index 2 index sub lineto + closepath pop pop pop} bind def +/nc { 0 0 0 setrgbcolor 5 index 5 index 5 index c fill + setrgbcolor 1.1 div c fill + } bind def +/nsq { 0 0 0 setrgbcolor 5 index 5 index 5 index sq fill + setrgbcolor 1.1 div sq fill + } bind def +/ndi { 0 0 0 setrgbcolor 5 index 5 index 5 index di fill + setrgbcolor 1.1 div di fill + } bind def +/arrl 1 def +/arrw 0.3 def +/lrl { 2 index mul exch 2 index mul exch rlineto pop} bind def +/arr { setrgbcolor /y1 exch def /x1 exch def /dy exch def /dx exch def + /w exch def /len exch def + newpath x1 dy w 2 div mul add y1 dx w 2 div mul sub moveto + len w sub arrl sub dx dy lrl + arrw dy dx neg lrl + dx arrl w add mul dy w 2 div arrw add mul sub + dy arrl w add mul dx w 2 div arrw add mul add rlineto + dx arrl w add mul neg dy w 2 div arrw add mul sub + dy arrl w add mul neg dx w 2 div arrw add mul add rlineto + arrw dy dx neg lrl + len w sub arrl sub neg dx dy lrl + closepath fill } bind def +/cshow { 2 index 2 index moveto dup stringwidth pop + neg 2 div fosi .35 mul neg rmoveto show pop pop} def + +gsave +100 dup scale +%Edges: +gsave +grestore +%Nodes: +gsave +1 1 1 0.2 1 0.2 nsq +grestore +grestore +showpage diff --git a/doc/images/nodeshape_2.eps b/doc/images/nodeshape_2.eps new file mode 100644 --- /dev/null +++ b/doc/images/nodeshape_2.eps @@ -0,0 +1,57 @@ +%!PS-Adobe-2.0 EPSF-2.0 +%%Title: LEMON GraphToEps figure +%%Creator: LEMON GraphToEps function +%%BoundingBox: 0 0 200 200 +%%EndComments +/lb { setlinewidth setrgbcolor newpath moveto + 4 2 roll 1 index 1 index curveto stroke } bind def +/l { setlinewidth setrgbcolor newpath moveto lineto stroke } bind def +/c { newpath dup 3 index add 2 index moveto 0 360 arc closepath } bind def +/sq { newpath 2 index 1 index add 2 index 2 index add moveto + 2 index 1 index sub 2 index 2 index add lineto + 2 index 1 index sub 2 index 2 index sub lineto + 2 index 1 index add 2 index 2 index sub lineto + closepath pop pop pop} bind def +/di { newpath 2 index 1 index add 2 index moveto + 2 index 2 index 2 index add lineto + 2 index 1 index sub 2 index lineto + 2 index 2 index 2 index sub lineto + closepath pop pop pop} bind def +/nc { 0 0 0 setrgbcolor 5 index 5 index 5 index c fill + setrgbcolor 1.1 div c fill + } bind def +/nsq { 0 0 0 setrgbcolor 5 index 5 index 5 index sq fill + setrgbcolor 1.1 div sq fill + } bind def +/ndi { 0 0 0 setrgbcolor 5 index 5 index 5 index di fill + setrgbcolor 1.1 div di fill + } bind def +/arrl 1 def +/arrw 0.3 def +/lrl { 2 index mul exch 2 index mul exch rlineto pop} bind def +/arr { setrgbcolor /y1 exch def /x1 exch def /dy exch def /dx exch def + /w exch def /len exch def + newpath x1 dy w 2 div mul add y1 dx w 2 div mul sub moveto + len w sub arrl sub dx dy lrl + arrw dy dx neg lrl + dx arrl w add mul dy w 2 div arrw add mul sub + dy arrl w add mul dx w 2 div arrw add mul add rlineto + dx arrl w add mul neg dy w 2 div arrw add mul sub + dy arrl w add mul neg dx w 2 div arrw add mul add rlineto + arrw dy dx neg lrl + len w sub arrl sub neg dx dy lrl + closepath fill } bind def +/cshow { 2 index 2 index moveto dup stringwidth pop + neg 2 div fosi .35 mul neg rmoveto show pop pop} def + +gsave +100 dup scale +%Edges: +gsave +grestore +%Nodes: +gsave +1 1 1 0.2 1 0.2 ndi +grestore +grestore +showpage diff --git a/doc/images/nodeshape_3.eps b/doc/images/nodeshape_3.eps new file mode 100644 --- /dev/null +++ b/doc/images/nodeshape_3.eps @@ -0,0 +1,77 @@ +%!PS-Adobe-2.0 EPSF-2.0 +%%Title: LEMON GraphToEps figure +%%Creator: LEMON GraphToEps function +%%BoundingBox: 0 0 256 372 +%%EndComments +/lb { setlinewidth setrgbcolor newpath moveto + 4 2 roll 1 index 1 index curveto stroke } bind def +/l { setlinewidth setrgbcolor newpath moveto lineto stroke } bind def +/c { newpath dup 3 index add 2 index moveto 0 360 arc closepath } bind def +/sq { newpath 2 index 1 index add 2 index 2 index add moveto + 2 index 1 index sub 2 index 2 index add lineto + 2 index 1 index sub 2 index 2 index sub lineto + 2 index 1 index add 2 index 2 index sub lineto + closepath pop pop pop} bind def +/di { newpath 2 index 1 index add 2 index moveto + 2 index 2 index 2 index add lineto + 2 index 1 index sub 2 index lineto + 2 index 2 index 2 index sub lineto + closepath pop pop pop} bind def +/nc { 0 0 0 setrgbcolor 5 index 5 index 5 index c fill + setrgbcolor 1.1 div c fill + } bind def +/nsq { 0 0 0 setrgbcolor 5 index 5 index 5 index sq fill + setrgbcolor 1.1 div sq fill + } bind def +/ndi { 0 0 0 setrgbcolor 5 index 5 index 5 index di fill + setrgbcolor 1.1 div di fill + } bind def +/nfemale { 0 0 0 setrgbcolor 3 index 0.0909091 1.5 mul mul setlinewidth + newpath 5 index 5 index moveto 5 index 5 index 5 index 3.01 mul sub + lineto 5 index 4 index .7 mul sub 5 index 5 index 2.2 mul sub moveto + 5 index 4 index .7 mul add 5 index 5 index 2.2 mul sub lineto stroke + 5 index 5 index 5 index c fill + setrgbcolor 1.1 div c fill + } bind def +/nmale { + 0 0 0 setrgbcolor 3 index 0.0909091 1.5 mul mul setlinewidth + newpath 5 index 5 index moveto + 5 index 4 index 1 mul 1.5 mul add + 5 index 5 index 3 sqrt 1.5 mul mul add + 1 index 1 index lineto + 1 index 1 index 7 index sub moveto + 1 index 1 index lineto + exch 5 index 3 sqrt .5 mul mul sub exch 5 index .5 mul sub lineto + stroke + 5 index 5 index 5 index c fill + setrgbcolor 1.1 div c fill + } bind def +/arrl 1 def +/arrw 0.3 def +/lrl { 2 index mul exch 2 index mul exch rlineto pop} bind def +/arr { setrgbcolor /y1 exch def /x1 exch def /dy exch def /dx exch def + /w exch def /len exch def + newpath x1 dy w 2 div mul add y1 dx w 2 div mul sub moveto + len w sub arrl sub dx dy lrl + arrw dy dx neg lrl + dx arrl w add mul dy w 2 div arrw add mul sub + dy arrl w add mul dx w 2 div arrw add mul add rlineto + dx arrl w add mul neg dy w 2 div arrw add mul sub + dy arrl w add mul neg dx w 2 div arrw add mul add rlineto + arrw dy dx neg lrl + len w sub arrl sub neg dx dy lrl + closepath fill } bind def +/cshow { 2 index 2 index moveto dup stringwidth pop + neg 2 div fosi .35 mul neg rmoveto show pop pop} def + +gsave +100 dup scale +%Edges: +gsave +grestore +%Nodes: +gsave +1 1 1 0.2 1 0.2 nmale +grestore +grestore +showpage diff --git a/doc/images/nodeshape_4.eps b/doc/images/nodeshape_4.eps new file mode 100644 --- /dev/null +++ b/doc/images/nodeshape_4.eps @@ -0,0 +1,77 @@ +%!PS-Adobe-2.0 EPSF-2.0 +%%Title: LEMON GraphToEps figure +%%Creator: LEMON GraphToEps function +%%BoundingBox: 0 -199 200 200 +%%EndComments +/lb { setlinewidth setrgbcolor newpath moveto + 4 2 roll 1 index 1 index curveto stroke } bind def +/l { setlinewidth setrgbcolor newpath moveto lineto stroke } bind def +/c { newpath dup 3 index add 2 index moveto 0 360 arc closepath } bind def +/sq { newpath 2 index 1 index add 2 index 2 index add moveto + 2 index 1 index sub 2 index 2 index add lineto + 2 index 1 index sub 2 index 2 index sub lineto + 2 index 1 index add 2 index 2 index sub lineto + closepath pop pop pop} bind def +/di { newpath 2 index 1 index add 2 index moveto + 2 index 2 index 2 index add lineto + 2 index 1 index sub 2 index lineto + 2 index 2 index 2 index sub lineto + closepath pop pop pop} bind def +/nc { 0 0 0 setrgbcolor 5 index 5 index 5 index c fill + setrgbcolor 1.1 div c fill + } bind def +/nsq { 0 0 0 setrgbcolor 5 index 5 index 5 index sq fill + setrgbcolor 1.1 div sq fill + } bind def +/ndi { 0 0 0 setrgbcolor 5 index 5 index 5 index di fill + setrgbcolor 1.1 div di fill + } bind def +/nfemale { 0 0 0 setrgbcolor 3 index 0.0909091 1.5 mul mul setlinewidth + newpath 5 index 5 index moveto 5 index 5 index 5 index 3.01 mul sub + lineto 5 index 4 index .7 mul sub 5 index 5 index 2.2 mul sub moveto + 5 index 4 index .7 mul add 5 index 5 index 2.2 mul sub lineto stroke + 5 index 5 index 5 index c fill + setrgbcolor 1.1 div c fill + } bind def +/nmale { + 0 0 0 setrgbcolor 3 index 0.0909091 1.5 mul mul setlinewidth + newpath 5 index 5 index moveto + 5 index 4 index 1 mul 1.5 mul add + 5 index 5 index 3 sqrt 1.5 mul mul add + 1 index 1 index lineto + 1 index 1 index 7 index sub moveto + 1 index 1 index lineto + exch 5 index 3 sqrt .5 mul mul sub exch 5 index .5 mul sub lineto + stroke + 5 index 5 index 5 index c fill + setrgbcolor 1.1 div c fill + } bind def +/arrl 1 def +/arrw 0.3 def +/lrl { 2 index mul exch 2 index mul exch rlineto pop} bind def +/arr { setrgbcolor /y1 exch def /x1 exch def /dy exch def /dx exch def + /w exch def /len exch def + newpath x1 dy w 2 div mul add y1 dx w 2 div mul sub moveto + len w sub arrl sub dx dy lrl + arrw dy dx neg lrl + dx arrl w add mul dy w 2 div arrw add mul sub + dy arrl w add mul dx w 2 div arrw add mul add rlineto + dx arrl w add mul neg dy w 2 div arrw add mul sub + dy arrl w add mul neg dx w 2 div arrw add mul add rlineto + arrw dy dx neg lrl + len w sub arrl sub neg dx dy lrl + closepath fill } bind def +/cshow { 2 index 2 index moveto dup stringwidth pop + neg 2 div fosi .35 mul neg rmoveto show pop pop} def + +gsave +100 dup scale +%Edges: +gsave +grestore +%Nodes: +gsave +1 1 1 0.2 1 0.2 nfemale +grestore +grestore +showpage