COIN-OR::LEMON - Graph Library

source: lemon-0.x/doc/Doxyfile @ 1170:fb0159aa582d

Last change on this file since 1170:fb0159aa582d was 1170:fb0159aa582d, checked in by Alpar Juttner, 20 years ago

Fix Doxyfile and the wrong hyperlinks in the doc.

File size: 49.5 KB
Line 
1# Doxyfile 1.4.0
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project
5#
6# All text after a hash (#) is considered a comment and will be ignored
7# The format is:
8#       TAG = value [value, ...]
9# For lists items can also be appended using:
10#       TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ")
12
13#---------------------------------------------------------------------------
14# Project related configuration options
15#---------------------------------------------------------------------------
16
17# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
18# by quotes) that should identify the project.
19
20PROJECT_NAME           = LEMON
21
22# The PROJECT_NUMBER tag can be used to enter a project or revision number.
23# This could be handy for archiving the generated documentation or
24# if some version control system is used.
25
26PROJECT_NUMBER         = 0.4
27
28# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
29# base path where the generated documentation will be put.
30# If a relative path is entered, it will be relative to the location
31# where doxygen was started. If left blank the current directory will be used.
32
33OUTPUT_DIRECTORY       =
34
35# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
36# 4096 sub-directories (in 2 levels) under the output directory of each output
37# format and will distribute the generated files over these directories.
38# Enabling this option can be useful when feeding doxygen a huge amount of
39# source files, where putting all generated files in the same directory would
40# otherwise cause performance problems for the file system.
41
42CREATE_SUBDIRS         = NO
43
44# The OUTPUT_LANGUAGE tag is used to specify the language in which all
45# documentation generated by doxygen is written. Doxygen will use this
46# information to generate all constant output in the proper language.
47# The default language is English, other supported languages are:
48# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
49# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
50# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
51# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
52# Swedish, and Ukrainian.
53
54OUTPUT_LANGUAGE        = English
55
56# This tag can be used to specify the encoding used in the generated output.
57# The encoding is not always determined by the language that is chosen,
58# but also whether or not the output is meant for Windows or non-Windows users.
59# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
60# forces the Windows encoding (this is the default for the Windows binary),
61# whereas setting the tag to NO uses a Unix-style encoding (the default for
62# all platforms other than Windows).
63
64USE_WINDOWS_ENCODING   = NO
65
66# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
67# include brief member descriptions after the members that are listed in
68# the file and class documentation (similar to JavaDoc).
69# Set to NO to disable this.
70
71BRIEF_MEMBER_DESC      = YES
72
73# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
74# the brief description of a member or function before the detailed description.
75# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
76# brief descriptions will be completely suppressed.
77
78REPEAT_BRIEF           = NO
79
80# This tag implements a quasi-intelligent brief description abbreviator
81# that is used to form the text in various listings. Each string
82# in this list, if found as the leading text of the brief description, will be
83# stripped from the text and the result after processing the whole list, is
84# used as the annotated text. Otherwise, the brief description is used as-is.
85# If left blank, the following values are used ("$name" is automatically
86# replaced with the name of the entity): "The $name class" "The $name widget"
87# "The $name file" "is" "provides" "specifies" "contains"
88# "represents" "a" "an" "the"
89
90ABBREVIATE_BRIEF       =
91
92# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
93# Doxygen will generate a detailed section even if there is only a brief
94# description.
95
96ALWAYS_DETAILED_SEC    = NO
97
98# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
99# inherited members of a class in the documentation of that class as if those
100# members were ordinary class members. Constructors, destructors and assignment
101# operators of the base classes will not be shown.
102
103INLINE_INHERITED_MEMB  = NO
104
105# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
106# path before files name in the file list and in the header files. If set
107# to NO the shortest path that makes the file name unique will be used.
108
109FULL_PATH_NAMES        = YES
110
111# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
112# can be used to strip a user-defined part of the path. Stripping is
113# only done if one of the specified strings matches the left-hand part of
114# the path. The tag can be used to show relative paths in the file list.
115# If left blank the directory from which doxygen is run is used as the
116# path to strip.
117
118STRIP_FROM_PATH        = ../src
119
120# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
121# the path mentioned in the documentation of a class, which tells
122# the reader which header file to include in order to use a class.
123# If left blank only the name of the header file containing the class
124# definition is used. Otherwise one should specify the include paths that
125# are normally passed to the compiler using the -I flag.
126
127STRIP_FROM_INC_PATH    = ../src
128
129# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
130# (but less readable) file names. This can be useful is your file systems
131# doesn't support long names like on DOS, Mac, or CD-ROM.
132
133SHORT_NAMES            = NO
134
135# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
136# will interpret the first line (until the first dot) of a JavaDoc-style
137# comment as the brief description. If set to NO, the JavaDoc
138# comments will behave just like the Qt-style comments (thus requiring an
139# explicit @brief command for a brief description.
140
141JAVADOC_AUTOBRIEF      = NO
142
143# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
144# treat a multi-line C++ special comment block (i.e. a block of //! or ///
145# comments) as a brief description. This used to be the default behaviour.
146# The new default is to treat a multi-line C++ comment block as a detailed
147# description. Set this tag to YES if you prefer the old behaviour instead.
148
149MULTILINE_CPP_IS_BRIEF = NO
150
151# If the DETAILS_AT_TOP tag is set to YES then Doxygen
152# will output the detailed description near the top, like JavaDoc.
153# If set to NO, the detailed description appears after the member
154# documentation.
155
156DETAILS_AT_TOP         = YES
157
158# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
159# member inherits the documentation from any documented member that it
160# re-implements.
161
162INHERIT_DOCS           = NO
163
164# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
165# tag is set to YES, then doxygen will reuse the documentation of the first
166# member in the group (if any) for the other members of the group. By default
167# all members of a group must be documented explicitly.
168
169DISTRIBUTE_GROUP_DOC   = NO
170
171# The TAB_SIZE tag can be used to set the number of spaces in a tab.
172# Doxygen uses this value to replace tabs by spaces in code fragments.
173
174TAB_SIZE               = 8
175
176# This tag can be used to specify a number of aliases that acts
177# as commands in the documentation. An alias has the form "name=value".
178# For example adding "sideeffect=\par Side Effects:\n" will allow you to
179# put the command \sideeffect (or @sideeffect) in the documentation, which
180# will result in a user-defined paragraph with heading "Side Effects:".
181# You can put \n's in the value part of an alias to insert newlines.
182
183ALIASES                =
184
185# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
186# sources only. Doxygen will then generate output that is more tailored for C.
187# For instance, some of the names that are used will be different. The list
188# of all members will be omitted, etc.
189
190OPTIMIZE_OUTPUT_FOR_C  = NO
191
192# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
193# only. Doxygen will then generate output that is more tailored for Java.
194# For instance, namespaces will be presented as packages, qualified scopes
195# will look different, etc.
196
197OPTIMIZE_OUTPUT_JAVA   = NO
198
199# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
200# the same type (for instance a group of public functions) to be put as a
201# subgroup of that type (e.g. under the Public Functions section). Set it to
202# NO to prevent subgrouping. Alternatively, this can be done per class using
203# the \nosubgrouping command.
204
205SUBGROUPING            = YES
206
207#---------------------------------------------------------------------------
208# Build related configuration options
209#---------------------------------------------------------------------------
210
211# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
212# documentation are documented, even if no documentation was available.
213# Private class members and static file members will be hidden unless
214# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
215
216EXTRACT_ALL            = NO
217
218# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
219# will be included in the documentation.
220
221EXTRACT_PRIVATE        = NO
222
223# If the EXTRACT_STATIC tag is set to YES all static members of a file
224# will be included in the documentation.
225
226EXTRACT_STATIC         = NO
227
228# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
229# defined locally in source files will be included in the documentation.
230# If set to NO only classes defined in header files are included.
231
232EXTRACT_LOCAL_CLASSES  = YES
233
234# This flag is only useful for Objective-C code. When set to YES local
235# methods, which are defined in the implementation section but not in
236# the interface are included in the documentation.
237# If set to NO (the default) only methods in the interface are included.
238
239EXTRACT_LOCAL_METHODS  = NO
240
241# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
242# undocumented members of documented classes, files or namespaces.
243# If set to NO (the default) these members will be included in the
244# various overviews, but no documentation section is generated.
245# This option has no effect if EXTRACT_ALL is enabled.
246
247HIDE_UNDOC_MEMBERS     = YES
248
249# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
250# undocumented classes that are normally visible in the class hierarchy.
251# If set to NO (the default) these classes will be included in the various
252# overviews. This option has no effect if EXTRACT_ALL is enabled.
253
254HIDE_UNDOC_CLASSES     = YES
255
256# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
257# friend (class|struct|union) declarations.
258# If set to NO (the default) these declarations will be included in the
259# documentation.
260
261HIDE_FRIEND_COMPOUNDS  = NO
262
263# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
264# documentation blocks found inside the body of a function.
265# If set to NO (the default) these blocks will be appended to the
266# function's detailed documentation block.
267
268HIDE_IN_BODY_DOCS      = NO
269
270# The INTERNAL_DOCS tag determines if documentation
271# that is typed after a \internal command is included. If the tag is set
272# to NO (the default) then the documentation will be excluded.
273# Set it to YES to include the internal documentation.
274
275INTERNAL_DOCS          = NO
276
277# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
278# file names in lower-case letters. If set to YES upper-case letters are also
279# allowed. This is useful if you have classes or files whose names only differ
280# in case and if your file system supports case sensitive file names. Windows
281# and Mac users are advised to set this option to NO.
282
283CASE_SENSE_NAMES       = YES
284
285# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
286# will show members with their full class and namespace scopes in the
287# documentation. If set to YES the scope will be hidden.
288
289HIDE_SCOPE_NAMES       = YES
290
291# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
292# will put a list of the files that are included by a file in the documentation
293# of that file.
294
295SHOW_INCLUDE_FILES     = YES
296
297# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
298# is inserted in the documentation for inline members.
299
300INLINE_INFO            = YES
301
302# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
303# will sort the (detailed) documentation of file and class members
304# alphabetically by member name. If set to NO the members will appear in
305# declaration order.
306
307SORT_MEMBER_DOCS       = NO
308
309# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
310# brief documentation of file, namespace and class members alphabetically
311# by member name. If set to NO (the default) the members will appear in
312# declaration order.
313
314SORT_BRIEF_DOCS        = NO
315
316# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
317# sorted by fully-qualified names, including namespaces. If set to
318# NO (the default), the class list will be sorted only by class name,
319# not including the namespace part.
320# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
321# Note: This option applies only to the class list, not to the
322# alphabetical list.
323
324SORT_BY_SCOPE_NAME     = NO
325
326# The GENERATE_TODOLIST tag can be used to enable (YES) or
327# disable (NO) the todo list. This list is created by putting \todo
328# commands in the documentation.
329
330GENERATE_TODOLIST      = YES
331
332# The GENERATE_TESTLIST tag can be used to enable (YES) or
333# disable (NO) the test list. This list is created by putting \test
334# commands in the documentation.
335
336GENERATE_TESTLIST      = YES
337
338# The GENERATE_BUGLIST tag can be used to enable (YES) or
339# disable (NO) the bug list. This list is created by putting \bug
340# commands in the documentation.
341
342GENERATE_BUGLIST       = YES
343
344# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
345# disable (NO) the deprecated list. This list is created by putting
346# \deprecated commands in the documentation.
347
348GENERATE_DEPRECATEDLIST= YES
349
350# The ENABLED_SECTIONS tag can be used to enable conditional
351# documentation sections, marked by \if sectionname ... \endif.
352
353ENABLED_SECTIONS       =
354
355# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
356# the initial value of a variable or define consists of for it to appear in
357# the documentation. If the initializer consists of more lines than specified
358# here it will be hidden. Use a value of 0 to hide initializers completely.
359# The appearance of the initializer of individual variables and defines in the
360# documentation can be controlled using \showinitializer or \hideinitializer
361# command in the documentation regardless of this setting.
362
363MAX_INITIALIZER_LINES  = 5
364
365# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
366# at the bottom of the documentation of classes and structs. If set to YES the
367# list will mention the files that were used to generate the documentation.
368
369SHOW_USED_FILES        = YES
370
371# If the sources in your project are distributed over multiple directories
372# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
373# in the documentation.
374
375SHOW_DIRECTORIES       = YES
376
377# The FILE_VERSION_FILTER tag can be used to specify a program or script that
378# doxygen should invoke to get the current version for each file (typically from the
379# version control system). Doxygen will invoke the program by executing (via
380# popen()) the command <command> <input-file>, where <command> is the value of
381# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
382# provided by doxygen. Whatever the progam writes to standard output
383# is used as the file version. See the manual for examples.
384
385FILE_VERSION_FILTER    =
386
387#---------------------------------------------------------------------------
388# configuration options related to warning and progress messages
389#---------------------------------------------------------------------------
390
391# The QUIET tag can be used to turn on/off the messages that are generated
392# by doxygen. Possible values are YES and NO. If left blank NO is used.
393
394QUIET                  = NO
395
396# The WARNINGS tag can be used to turn on/off the warning messages that are
397# generated by doxygen. Possible values are YES and NO. If left blank
398# NO is used.
399
400WARNINGS               = YES
401
402# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
403# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
404# automatically be disabled.
405
406WARN_IF_UNDOCUMENTED   = YES
407
408# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
409# potential errors in the documentation, such as not documenting some
410# parameters in a documented function, or documenting parameters that
411# don't exist or using markup commands wrongly.
412
413WARN_IF_DOC_ERROR      = YES
414
415# This WARN_NO_PARAMDOC option can be abled to get warnings for
416# functions that are documented, but have no documentation for their parameters
417# or return value. If set to NO (the default) doxygen will only warn about
418# wrong or incomplete parameter documentation, but not about the absence of
419# documentation.
420
421WARN_NO_PARAMDOC       = NO
422
423# The WARN_FORMAT tag determines the format of the warning messages that
424# doxygen can produce. The string should contain the $file, $line, and $text
425# tags, which will be replaced by the file and line number from which the
426# warning originated and the warning text. Optionally the format may contain
427# $version, which will be replaced by the version of the file (if it could
428# be obtained via FILE_VERSION_FILTER)
429
430WARN_FORMAT            = "$file:$line: $text"
431
432# The WARN_LOGFILE tag can be used to specify a file to which warning
433# and error messages should be written. If left blank the output is written
434# to stderr.
435
436WARN_LOGFILE           = doxygen.log
437
438#---------------------------------------------------------------------------
439# configuration options related to the input files
440#---------------------------------------------------------------------------
441
442# The INPUT tag can be used to specify the files and/or directories that contain
443# documented source files. You may enter file names like "myfile.cpp" or
444# directories like "/usr/src/myproject". Separate the files or directories
445# with spaces.
446
447INPUT                  = mainpage.dox \
448                         quicktour.dox \
449                         demoprograms.dox \
450                         graphs.dox \
451                         undir_graphs.dox \
452                         named-param.dox \
453                         maps.dox \
454                         coding_style.dox \
455                         groups.dox \
456                         namespaces.dox \
457                         license.dox \
458                         developers_interface.dox \
459                         graph_io.dox \
460                         dirs.dox \
461                         ../src/lemon \
462                         ../src/lemon/concept \
463                         ../src/test/test_tools.h
464
465# If the value of the INPUT tag contains directories, you can use the
466# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
467# and *.h) to filter out the source-files in the directories. If left
468# blank the following patterns are tested:
469# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
470# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
471
472FILE_PATTERNS          =
473
474# The RECURSIVE tag can be used to turn specify whether or not subdirectories
475# should be searched for input files as well. Possible values are YES and NO.
476# If left blank NO is used.
477
478RECURSIVE              = NO
479
480# The EXCLUDE tag can be used to specify files and/or directories that should
481# excluded from the INPUT source files. This way you can easily exclude a
482# subdirectory from a directory tree whose root is specified with the INPUT tag.
483
484EXCLUDE                =
485
486# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
487# directories that are symbolic links (a Unix filesystem feature) are excluded
488# from the input.
489
490EXCLUDE_SYMLINKS       = NO
491
492# If the value of the INPUT tag contains directories, you can use the
493# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
494# certain files from those directories.
495
496EXCLUDE_PATTERNS       =
497
498# The EXAMPLE_PATH tag can be used to specify one or more files or
499# directories that contain example code fragments that are included (see
500# the \include command).
501
502EXAMPLE_PATH           = ../src/demo \
503                         ../LICENSE \
504                         .
505
506# If the value of the EXAMPLE_PATH tag contains directories, you can use the
507# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
508# and *.h) to filter out the source-files in the directories. If left
509# blank all files are included.
510
511EXAMPLE_PATTERNS       =
512
513# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
514# searched for input files to be used with the \include or \dontinclude
515# commands irrespective of the value of the RECURSIVE tag.
516# Possible values are YES and NO. If left blank NO is used.
517
518EXAMPLE_RECURSIVE      = NO
519
520# The IMAGE_PATH tag can be used to specify one or more files or
521# directories that contain image that are included in the documentation (see
522# the \image command).
523
524IMAGE_PATH             = images
525
526# The INPUT_FILTER tag can be used to specify a program that doxygen should
527# invoke to filter for each input file. Doxygen will invoke the filter program
528# by executing (via popen()) the command <filter> <input-file>, where <filter>
529# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
530# input file. Doxygen will then use the output that the filter program writes
531# to standard output.  If FILTER_PATTERNS is specified, this tag will be
532# ignored.
533
534INPUT_FILTER           =
535
536# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
537# basis.  Doxygen will compare the file name with each pattern and apply the
538# filter if there is a match.  The filters are a list of the form:
539# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
540# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
541# is applied to all files.
542
543FILTER_PATTERNS        =
544
545# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
546# INPUT_FILTER) will be used to filter the input files when producing source
547# files to browse (i.e. when SOURCE_BROWSER is set to YES).
548
549FILTER_SOURCE_FILES    = NO
550
551#---------------------------------------------------------------------------
552# configuration options related to source browsing
553#---------------------------------------------------------------------------
554
555# If the SOURCE_BROWSER tag is set to YES then a list of source files will
556# be generated. Documented entities will be cross-referenced with these sources.
557# Note: To get rid of all source code in the generated output, make sure also
558# VERBATIM_HEADERS is set to NO.
559
560SOURCE_BROWSER         = YES
561
562# Setting the INLINE_SOURCES tag to YES will include the body
563# of functions and classes directly in the documentation.
564
565INLINE_SOURCES         = NO
566
567# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
568# doxygen to hide any special comment blocks from generated source code
569# fragments. Normal C and C++ comments will always remain visible.
570
571STRIP_CODE_COMMENTS    = YES
572
573# If the REFERENCED_BY_RELATION tag is set to YES (the default)
574# then for each documented function all documented
575# functions referencing it will be listed.
576
577REFERENCED_BY_RELATION = NO
578
579# If the REFERENCES_RELATION tag is set to YES (the default)
580# then for each documented function all documented entities
581# called/used by that function will be listed.
582
583REFERENCES_RELATION    = NO
584
585# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
586# will generate a verbatim copy of the header file for each class for
587# which an include is specified. Set to NO to disable this.
588
589VERBATIM_HEADERS       = YES
590
591#---------------------------------------------------------------------------
592# configuration options related to the alphabetical class index
593#---------------------------------------------------------------------------
594
595# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
596# of all compounds will be generated. Enable this if the project
597# contains a lot of classes, structs, unions or interfaces.
598
599ALPHABETICAL_INDEX     = YES
600
601# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
602# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
603# in which this list will be split (can be a number in the range [1..20])
604
605COLS_IN_ALPHA_INDEX    = 2
606
607# In case all classes in a project start with a common prefix, all
608# classes will be put under the same header in the alphabetical index.
609# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
610# should be ignored while generating the index headers.
611
612IGNORE_PREFIX          =
613
614#---------------------------------------------------------------------------
615# configuration options related to the HTML output
616#---------------------------------------------------------------------------
617
618# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
619# generate HTML output.
620
621GENERATE_HTML          = YES
622
623# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
624# If a relative path is entered the value of OUTPUT_DIRECTORY will be
625# put in front of it. If left blank `html' will be used as the default path.
626
627HTML_OUTPUT            = html
628
629# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
630# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
631# doxygen will generate files with .html extension.
632
633HTML_FILE_EXTENSION    = .html
634
635# The HTML_HEADER tag can be used to specify a personal HTML header for
636# each generated HTML page. If it is left blank doxygen will generate a
637# standard header.
638
639HTML_HEADER            =
640
641# The HTML_FOOTER tag can be used to specify a personal HTML footer for
642# each generated HTML page. If it is left blank doxygen will generate a
643# standard footer.
644
645HTML_FOOTER            =
646
647# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
648# style sheet that is used by each HTML page. It can be used to
649# fine-tune the look of the HTML output. If the tag is left blank doxygen
650# will generate a default style sheet. Note that doxygen will try to copy
651# the style sheet file to the HTML output directory, so don't put your own
652# stylesheet in the HTML output directory as well, or it will be erased!
653
654HTML_STYLESHEET        =
655
656# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
657# files or namespaces will be aligned in HTML using tables. If set to
658# NO a bullet list will be used.
659
660HTML_ALIGN_MEMBERS     = YES
661
662# If the GENERATE_HTMLHELP tag is set to YES, additional index files
663# will be generated that can be used as input for tools like the
664# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
665# of the generated HTML documentation.
666
667GENERATE_HTMLHELP      = NO
668
669# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
670# be used to specify the file name of the resulting .chm file. You
671# can add a path in front of the file if the result should not be
672# written to the html output directory.
673
674CHM_FILE               =
675
676# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
677# be used to specify the location (absolute path including file name) of
678# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
679# the HTML help compiler on the generated index.hhp.
680
681HHC_LOCATION           =
682
683# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
684# controls if a separate .chi index file is generated (YES) or that
685# it should be included in the master .chm file (NO).
686
687GENERATE_CHI           = NO
688
689# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
690# controls whether a binary table of contents is generated (YES) or a
691# normal table of contents (NO) in the .chm file.
692
693BINARY_TOC             = NO
694
695# The TOC_EXPAND flag can be set to YES to add extra items for group members
696# to the contents of the HTML help documentation and to the tree view.
697
698TOC_EXPAND             = NO
699
700# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
701# top of each HTML page. The value NO (the default) enables the index and
702# the value YES disables it.
703
704DISABLE_INDEX          = NO
705
706# This tag can be used to set the number of enum values (range [1..20])
707# that doxygen will group on one line in the generated HTML documentation.
708
709ENUM_VALUES_PER_LINE   = 4
710
711# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
712# generated containing a tree-like index structure (just like the one that
713# is generated for HTML Help). For this to work a browser that supports
714# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
715# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
716# probably better off using the HTML help feature.
717
718GENERATE_TREEVIEW      = YES
719
720# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
721# used to set the initial width (in pixels) of the frame in which the tree
722# is shown.
723
724TREEVIEW_WIDTH         = 250
725
726#---------------------------------------------------------------------------
727# configuration options related to the LaTeX output
728#---------------------------------------------------------------------------
729
730# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
731# generate Latex output.
732
733GENERATE_LATEX         = NO
734
735# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
736# If a relative path is entered the value of OUTPUT_DIRECTORY will be
737# put in front of it. If left blank `latex' will be used as the default path.
738
739LATEX_OUTPUT           = latex
740
741# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
742# invoked. If left blank `latex' will be used as the default command name.
743
744LATEX_CMD_NAME         = latex
745
746# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
747# generate index for LaTeX. If left blank `makeindex' will be used as the
748# default command name.
749
750MAKEINDEX_CMD_NAME     = makeindex
751
752# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
753# LaTeX documents. This may be useful for small projects and may help to
754# save some trees in general.
755
756COMPACT_LATEX          = YES
757
758# The PAPER_TYPE tag can be used to set the paper type that is used
759# by the printer. Possible values are: a4, a4wide, letter, legal and
760# executive. If left blank a4wide will be used.
761
762PAPER_TYPE             = a4wide
763
764# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
765# packages that should be included in the LaTeX output.
766
767EXTRA_PACKAGES         =
768
769# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
770# the generated latex document. The header should contain everything until
771# the first chapter. If it is left blank doxygen will generate a
772# standard header. Notice: only use this tag if you know what you are doing!
773
774LATEX_HEADER           =
775
776# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
777# is prepared for conversion to pdf (using ps2pdf). The pdf file will
778# contain links (just like the HTML output) instead of page references
779# This makes the output suitable for online browsing using a pdf viewer.
780
781PDF_HYPERLINKS         = YES
782
783# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
784# plain latex in the generated Makefile. Set this option to YES to get a
785# higher quality PDF documentation.
786
787USE_PDFLATEX           = YES
788
789# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
790# command to the generated LaTeX files. This will instruct LaTeX to keep
791# running if errors occur, instead of asking the user for help.
792# This option is also used when generating formulas in HTML.
793
794LATEX_BATCHMODE        = NO
795
796# If LATEX_HIDE_INDICES is set to YES then doxygen will not
797# include the index chapters (such as File Index, Compound Index, etc.)
798# in the output.
799
800LATEX_HIDE_INDICES     = NO
801
802#---------------------------------------------------------------------------
803# configuration options related to the RTF output
804#---------------------------------------------------------------------------
805
806# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
807# The RTF output is optimized for Word 97 and may not look very pretty with
808# other RTF readers or editors.
809
810GENERATE_RTF           = NO
811
812# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
813# If a relative path is entered the value of OUTPUT_DIRECTORY will be
814# put in front of it. If left blank `rtf' will be used as the default path.
815
816RTF_OUTPUT             = rtf
817
818# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
819# RTF documents. This may be useful for small projects and may help to
820# save some trees in general.
821
822COMPACT_RTF            = NO
823
824# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
825# will contain hyperlink fields. The RTF file will
826# contain links (just like the HTML output) instead of page references.
827# This makes the output suitable for online browsing using WORD or other
828# programs which support those fields.
829# Note: wordpad (write) and others do not support links.
830
831RTF_HYPERLINKS         = NO
832
833# Load stylesheet definitions from file. Syntax is similar to doxygen's
834# config file, i.e. a series of assignments. You only have to provide
835# replacements, missing definitions are set to their default value.
836
837RTF_STYLESHEET_FILE    =
838
839# Set optional variables used in the generation of an rtf document.
840# Syntax is similar to doxygen's config file.
841
842RTF_EXTENSIONS_FILE    =
843
844#---------------------------------------------------------------------------
845# configuration options related to the man page output
846#---------------------------------------------------------------------------
847
848# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
849# generate man pages
850
851GENERATE_MAN           = NO
852
853# The MAN_OUTPUT tag is used to specify where the man pages will be put.
854# If a relative path is entered the value of OUTPUT_DIRECTORY will be
855# put in front of it. If left blank `man' will be used as the default path.
856
857MAN_OUTPUT             = man
858
859# The MAN_EXTENSION tag determines the extension that is added to
860# the generated man pages (default is the subroutine's section .3)
861
862MAN_EXTENSION          = .3
863
864# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
865# then it will generate one additional man file for each entity
866# documented in the real man page(s). These additional files
867# only source the real man page, but without them the man command
868# would be unable to find the correct page. The default is NO.
869
870MAN_LINKS              = NO
871
872#---------------------------------------------------------------------------
873# configuration options related to the XML output
874#---------------------------------------------------------------------------
875
876# If the GENERATE_XML tag is set to YES Doxygen will
877# generate an XML file that captures the structure of
878# the code including all documentation.
879
880GENERATE_XML           = NO
881
882# The XML_OUTPUT tag is used to specify where the XML pages will be put.
883# If a relative path is entered the value of OUTPUT_DIRECTORY will be
884# put in front of it. If left blank `xml' will be used as the default path.
885
886XML_OUTPUT             = xml
887
888# The XML_SCHEMA tag can be used to specify an XML schema,
889# which can be used by a validating XML parser to check the
890# syntax of the XML files.
891
892XML_SCHEMA             =
893
894# The XML_DTD tag can be used to specify an XML DTD,
895# which can be used by a validating XML parser to check the
896# syntax of the XML files.
897
898XML_DTD                =
899
900# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
901# dump the program listings (including syntax highlighting
902# and cross-referencing information) to the XML output. Note that
903# enabling this will significantly increase the size of the XML output.
904
905XML_PROGRAMLISTING     = YES
906
907#---------------------------------------------------------------------------
908# configuration options for the AutoGen Definitions output
909#---------------------------------------------------------------------------
910
911# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
912# generate an AutoGen Definitions (see autogen.sf.net) file
913# that captures the structure of the code including all
914# documentation. Note that this feature is still experimental
915# and incomplete at the moment.
916
917GENERATE_AUTOGEN_DEF   = NO
918
919#---------------------------------------------------------------------------
920# configuration options related to the Perl module output
921#---------------------------------------------------------------------------
922
923# If the GENERATE_PERLMOD tag is set to YES Doxygen will
924# generate a Perl module file that captures the structure of
925# the code including all documentation. Note that this
926# feature is still experimental and incomplete at the
927# moment.
928
929GENERATE_PERLMOD       = NO
930
931# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
932# the necessary Makefile rules, Perl scripts and LaTeX code to be able
933# to generate PDF and DVI output from the Perl module output.
934
935PERLMOD_LATEX          = NO
936
937# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
938# nicely formatted so it can be parsed by a human reader.  This is useful
939# if you want to understand what is going on.  On the other hand, if this
940# tag is set to NO the size of the Perl module output will be much smaller
941# and Perl will parse it just the same.
942
943PERLMOD_PRETTY         = YES
944
945# The names of the make variables in the generated doxyrules.make file
946# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
947# This is useful so different doxyrules.make files included by the same
948# Makefile don't overwrite each other's variables.
949
950PERLMOD_MAKEVAR_PREFIX =
951
952#---------------------------------------------------------------------------
953# Configuration options related to the preprocessor   
954#---------------------------------------------------------------------------
955
956# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
957# evaluate all C-preprocessor directives found in the sources and include
958# files.
959
960ENABLE_PREPROCESSING   = YES
961
962# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
963# names in the source code. If set to NO (the default) only conditional
964# compilation will be performed. Macro expansion can be done in a controlled
965# way by setting EXPAND_ONLY_PREDEF to YES.
966
967MACRO_EXPANSION        = NO
968
969# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
970# then the macro expansion is limited to the macros specified with the
971# PREDEFINED and EXPAND_AS_PREDEFINED tags.
972
973EXPAND_ONLY_PREDEF     = NO
974
975# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
976# in the INCLUDE_PATH (see below) will be search if a #include is found.
977
978SEARCH_INCLUDES        = YES
979
980# The INCLUDE_PATH tag can be used to specify one or more directories that
981# contain include files that are not input files but should be processed by
982# the preprocessor.
983
984INCLUDE_PATH           =
985
986# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
987# patterns (like *.h and *.hpp) to filter out the header-files in the
988# directories. If left blank, the patterns specified with FILE_PATTERNS will
989# be used.
990
991INCLUDE_FILE_PATTERNS  =
992
993# The PREDEFINED tag can be used to specify one or more macro names that
994# are defined before the preprocessor is started (similar to the -D option of
995# gcc). The argument of the tag is a list of macros of the form: name
996# or name=definition (no spaces). If the definition and the = are
997# omitted =1 is assumed. To prevent a macro definition from being
998# undefined via #undef or recursively expanded use the := operator
999# instead of the = operator.
1000
1001PREDEFINED             = DOXYGEN
1002
1003# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1004# this tag can be used to specify a list of macro names that should be expanded.
1005# The macro definition that is found in the sources will be used.
1006# Use the PREDEFINED tag if you want to use a different macro definition.
1007
1008EXPAND_AS_DEFINED      =
1009
1010# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1011# doxygen's preprocessor will remove all function-like macros that are alone
1012# on a line, have an all uppercase name, and do not end with a semicolon. Such
1013# function macros are typically used for boiler-plate code, and will confuse
1014# the parser if not removed.
1015
1016SKIP_FUNCTION_MACROS   = YES
1017
1018#---------------------------------------------------------------------------
1019# Configuration::additions related to external references   
1020#---------------------------------------------------------------------------
1021
1022# The TAGFILES option can be used to specify one or more tagfiles.
1023# Optionally an initial location of the external documentation
1024# can be added for each tagfile. The format of a tag file without
1025# this location is as follows:
1026#   TAGFILES = file1 file2 ...
1027# Adding location for the tag files is done as follows:
1028#   TAGFILES = file1=loc1 "file2 = loc2" ...
1029# where "loc1" and "loc2" can be relative or absolute paths or
1030# URLs. If a location is present for each tag, the installdox tool
1031# does not have to be run to correct the links.
1032# Note that each tag file must have a unique name
1033# (where the name does NOT include the path)
1034# If a tag file is not located in the directory in which doxygen
1035# is run, you must also specify the path to the tagfile here.
1036
1037TAGFILES               =
1038
1039# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1040# a tag file that is based on the input files it reads.
1041
1042GENERATE_TAGFILE       =
1043
1044# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1045# in the class index. If set to NO only the inherited external classes
1046# will be listed.
1047
1048ALLEXTERNALS           = NO
1049
1050# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1051# in the modules index. If set to NO, only the current project's groups will
1052# be listed.
1053
1054EXTERNAL_GROUPS        = YES
1055
1056# The PERL_PATH should be the absolute path and name of the perl script
1057# interpreter (i.e. the result of `which perl').
1058
1059PERL_PATH              = /usr/bin/perl
1060
1061#---------------------------------------------------------------------------
1062# Configuration options related to the dot tool   
1063#---------------------------------------------------------------------------
1064
1065# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1066# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1067# or super classes. Setting the tag to NO turns the diagrams off. Note that
1068# this option is superseded by the HAVE_DOT option below. This is only a
1069# fallback. It is recommended to install and use dot, since it yields more
1070# powerful graphs.
1071
1072CLASS_DIAGRAMS         = YES
1073
1074# If set to YES, the inheritance and collaboration graphs will hide
1075# inheritance and usage relations if the target is undocumented
1076# or is not a class.
1077
1078HIDE_UNDOC_RELATIONS   = NO
1079
1080# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1081# available from the path. This tool is part of Graphviz, a graph visualization
1082# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1083# have no effect if this option is set to NO (the default)
1084
1085HAVE_DOT               = YES
1086
1087# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1088# will generate a graph for each documented class showing the direct and
1089# indirect inheritance relations. Setting this tag to YES will force the
1090# the CLASS_DIAGRAMS tag to NO.
1091
1092CLASS_GRAPH            = YES
1093
1094# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1095# will generate a graph for each documented class showing the direct and
1096# indirect implementation dependencies (inheritance, containment, and
1097# class references variables) of the class with other documented classes.
1098
1099COLLABORATION_GRAPH    = YES
1100
1101# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1102# will generate a graph for groups, showing the direct groups dependencies
1103
1104GROUP_GRAPHS           = YES
1105
1106# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1107# collaboration diagrams in a style similar to the OMG's Unified Modeling
1108# Language.
1109
1110UML_LOOK               = NO
1111
1112# If set to YES, the inheritance and collaboration graphs will show the
1113# relations between templates and their instances.
1114
1115TEMPLATE_RELATIONS     = YES
1116
1117# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1118# tags are set to YES then doxygen will generate a graph for each documented
1119# file showing the direct and indirect include dependencies of the file with
1120# other documented files.
1121
1122INCLUDE_GRAPH          = YES
1123
1124# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1125# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1126# documented header file showing the documented files that directly or
1127# indirectly include this file.
1128
1129INCLUDED_BY_GRAPH      = YES
1130
1131# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
1132# generate a call dependency graph for every global function or class method.
1133# Note that enabling this option will significantly increase the time of a run.
1134# So in most cases it will be better to enable call graphs for selected
1135# functions only using the \callgraph command.
1136
1137CALL_GRAPH             = YES
1138
1139# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1140# will graphical hierarchy of all classes instead of a textual one.
1141
1142GRAPHICAL_HIERARCHY    = YES
1143
1144# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1145# then doxygen will show the dependencies a directory has on other directories
1146# in a graphical way. The dependency relations are determined by the #include
1147# relations between the files in the directories.
1148
1149DIRECTORY_GRAPH        = YES
1150
1151# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1152# generated by dot. Possible values are png, jpg, or gif
1153# If left blank png will be used.
1154
1155DOT_IMAGE_FORMAT       = png
1156
1157# The tag DOT_PATH can be used to specify the path where the dot tool can be
1158# found. If left blank, it is assumed the dot tool can be found on the path.
1159
1160DOT_PATH               =
1161
1162# The DOTFILE_DIRS tag can be used to specify one or more directories that
1163# contain dot files that are included in the documentation (see the
1164# \dotfile command).
1165
1166DOTFILE_DIRS           =
1167
1168# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
1169# (in pixels) of the graphs generated by dot. If a graph becomes larger than
1170# this value, doxygen will try to truncate the graph, so that it fits within
1171# the specified constraint. Beware that most browsers cannot cope with very
1172# large images.
1173
1174MAX_DOT_GRAPH_WIDTH    = 1024
1175
1176# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
1177# (in pixels) of the graphs generated by dot. If a graph becomes larger than
1178# this value, doxygen will try to truncate the graph, so that it fits within
1179# the specified constraint. Beware that most browsers cannot cope with very
1180# large images.
1181
1182MAX_DOT_GRAPH_HEIGHT   = 1024
1183
1184# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1185# graphs generated by dot. A depth value of 3 means that only nodes reachable
1186# from the root by following a path via at most 3 edges will be shown. Nodes
1187# that lay further from the root node will be omitted. Note that setting this
1188# option to 1 or 2 may greatly reduce the computation time needed for large
1189# code bases. Also note that a graph may be further truncated if the graph's
1190# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
1191# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
1192# the graph is not depth-constrained.
1193
1194MAX_DOT_GRAPH_DEPTH    = 0
1195
1196# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1197# background. This is disabled by default, which results in a white background.
1198# Warning: Depending on the platform used, enabling this option may lead to
1199# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
1200# read).
1201
1202DOT_TRANSPARENT        = NO
1203
1204# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1205# files in one run (i.e. multiple -o and -T options on the command line). This
1206# makes dot run faster, but since only newer versions of dot (>1.8.10)
1207# support this, this feature is disabled by default.
1208
1209DOT_MULTI_TARGETS      = NO
1210
1211# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1212# generate a legend page explaining the meaning of the various boxes and
1213# arrows in the dot generated graphs.
1214
1215GENERATE_LEGEND        = YES
1216
1217# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1218# remove the intermediate dot files that are used to generate
1219# the various graphs.
1220
1221DOT_CLEANUP            = YES
1222
1223#---------------------------------------------------------------------------
1224# Configuration::additions related to the search engine   
1225#---------------------------------------------------------------------------
1226
1227# The SEARCHENGINE tag specifies whether or not a search engine should be
1228# used. If set to NO the values of all tags below this one will be ignored.
1229
1230SEARCHENGINE           = NO
Note: See TracBrowser for help on using the repository browser.