source: lemon-main/INSTALL @ 835:b9b2e8abe70b

Installation Instructions
=========================

Since you are reading this I assume you already obtained one of the release
tarballs and successfully extracted it. The latest version of LEMON is
available at our web page (http://lemon.cs.elte.hu/).

LEMON provides two different build environments, one is based on "autotool",
while the other is based on "cmake". This file contains instructions only for
the former one, which is the recommended build environment on Linux, Mac OSX
and other unices or if you use Cygwin on Windows. For cmake installation
instructions visit http://lemon.cs.elte.hu.

In order to install LEMON from the extracted source tarball you have to
issue the following commands:

   1. `cd lemon-x.y.z'

      This command changes to the directory which was created when you
      extracted the sources. The x.y.z part is a version number.

   2. `./configure'

      This command runs the configure shell script, which does some checks and
      creates the makefiles.

   3. `make'

      This command compiles the non-template part of LEMON into libemon.a
      file. It also compiles the programs in the tools subdirectory by
      default.

   4. `make check'

      This step is optional, but recommended. It runs the test programs that
      we developed for LEMON to check whether the library works properly on
      your platform.

   5. `make install'

      This command installs LEMON under /usr/local (you will need root
      privileges to be able to do that). If you want to install it to some
      other location, then pass the --prefix=DIRECTORY flag to configure in
      step 2. For example: `./configure --prefix=/home/username/lemon'.

   6. `make install-html'

      This command installs the documentation under share/doc/lemon/docs. The
      generated documentation is included in the tarball. If you want to
      generate it yourself, then run `make html'. Note that for this you need
      to have the following programs installed: Doxygen, Graphviz, Ghostscript,
      Latex.


Configure Options and Variables
===============================

In step 2 you can customize the actions of configure by setting variables
and passing options to it. This can be done like this:
`./configure [OPTION]... [VARIABLE=VALUE]...'

Below you will find some useful variables and options (see `./configure --help'
for more):

CXX='comp'

  Change the C++ compiler to 'comp'.

CXXFLAGS='flags'

  Pass the 'flags' to the compiler. For example CXXFLAGS='-O3 -march=pentium-m'
  turns on generation of aggressively optimized Pentium-M specific code.

--prefix=PREFIX

  Set the installation prefix to PREFIX. By default it is /usr/local.

--enable-tools

   Build the programs in the tools subdirectory (default).

--disable-tools

   Do not build the programs in the tools subdirectory.

--with-glpk[=PREFIX]

   Enable GLPK support (default). You should specify the prefix too if
   you installed GLPK to some non-standard location (e.g. your home
   directory). If it is not found, GLPK support will be disabled.

--with-glpk-includedir=DIR

   The directory where the GLPK header files are located. This is only
   useful when the GLPK headers and libraries are not under the same
   prefix (which is unlikely).

--with-glpk-libdir=DIR

   The directory where the GLPK libraries are located. This is only
   useful when the GLPK headers and libraries are not under the same
   prefix (which is unlikely).

--without-glpk

   Disable GLPK support.

--with-cplex[=PREFIX]

   Enable CPLEX support (default). You should specify the prefix too
   if you installed CPLEX to some non-standard location
   (e.g. /opt/ilog/cplex75). If it is not found, CPLEX support will be
   disabled.

--with-cplex-includedir=DIR

   The directory where the CPLEX header files are located. This is
   only useful when the CPLEX headers and libraries are not under the
   same prefix (e.g.  /usr/local/cplex/cplex75/include).

--with-cplex-libdir=DIR

   The directory where the CPLEX libraries are located. This is only
   useful when the CPLEX headers and libraries are not under the same
   prefix (e.g.
   /usr/local/cplex/cplex75/lib/i86_linux2_glibc2.2_gcc3.0/static_pic_mt).

--without-cplex

   Disable CPLEX support.

--with-soplex[=PREFIX]

   Enable SoPlex support (default). You should specify the prefix too if
   you installed SoPlex to some non-standard location (e.g. your home
   directory). If it is not found, SoPlex support will be disabled.

--with-soplex-includedir=DIR

   The directory where the SoPlex header files are located. This is only
   useful when the SoPlex headers and libraries are not under the same
   prefix (which is unlikely).

--with-soplex-libdir=DIR

   The directory where the SoPlex libraries are located. This is only
   useful when the SoPlex headers and libraries are not under the same
   prefix (which is unlikely).

--without-soplex

   Disable SoPlex support.

--with-coin[=PREFIX]

   Enable support for COIN-OR solvers (CLP and CBC). You should
   specify the prefix too. (by default, COIN-OR tools install
   themselves to the source code directory). This command enables the
   solvers that are actually found.

--with-coin-includedir=DIR

   The directory where the COIN-OR header files are located. This is
   only useful when the COIN-OR headers and libraries are not under
   the same prefix (which is unlikely).

--with-coin-libdir=DIR

   The directory where the COIN-OR libraries are located. This is only
   useful when the COIN-OR headers and libraries are not under the
   same prefix (which is unlikely).

--without-coin

   Disable COIN-OR support.


Makefile Variables
==================

Some Makefile variables are reserved by the GNU Coding Standards for
the use of the "user" - the person building the package. For instance,
CXX and CXXFLAGS are such variables, and have the same meaning as
explained in the previous section. These variables can be set on the
command line when invoking `make' like this:
`make [VARIABLE=VALUE]...'

WARNINGCXXFLAGS is a non-standard Makefile variable introduced by us
to hold several compiler flags related to warnings. Its default value
can be overridden when invoking `make'. For example to disable all
warning flags use `make WARNINGCXXFLAGS='.

In order to turn off a single flag from the default set of warning
flags, you can use the CXXFLAGS variable, since this is passed after
WARNINGCXXFLAGS. For example to turn off `-Wold-style-cast' (which is
used by default when g++ is detected) you can use
`make CXXFLAGS="-g -O2 -Wno-old-style-cast"'.