COIN-OR::LEMON - Graph Library

source: lemon/INSTALL @ 980:bb871cb8ac06

Last change on this file since 980:bb871cb8ac06 was 526:07a549a6b9bf, checked in by Peter Kovacs <kpeter@…>, 16 years ago

Also note the cmake based build environment in INSTALL file

File size: 5.0 KB
Line 
1Installation Instructions
2=========================
3
4Since you are reading this I assume you already obtained one of the release
5tarballs and successfully extracted it. The latest version of LEMON is
6available at our web page (http://lemon.cs.elte.hu/).
7
8LEMON provides two different build environments, one is based on "autotool",
9while the other is based on "cmake". This file contains instructions only for
10the former one, which is the recommended build environment on Linux, Mac OSX
11and other unices or if you use Cygwin on Windows. For cmake installation
12instructions visit http://lemon.cs.elte.hu.
13
14In order to install LEMON from the extracted source tarball you have to
15issue the following commands:
16
17   1. `cd lemon-x.y.z'
18
19      This command changes to the directory which was created when you
20      extracted the sources. The x.y.z part is a version number.
21
22   2. `./configure'
23
24      This command runs the configure shell script, which does some checks and
25      creates the makefiles.
26
27   3. `make'
28
29      This command compiles the non-template part of LEMON into libemon.a
30      file. It also compiles the programs in the tools and demo subdirectories
31      when enabled.
32
33   4. `make check'
34
35      This step is optional, but recommended. It runs the test programs that
36      we developed for LEMON to check whether the library works properly on
37      your platform.
38
39   5. `make install'
40
41      This command installs LEMON under /usr/local (you will need root
42      privileges to be able to do that). If you want to install it to some
43      other location, then pass the --prefix=DIRECTORY flag to configure in
44      step 2. For example: `./configure --prefix=/home/username/lemon'.
45
46   6. `make install-html'
47
48      This command installs the documentation under share/doc/lemon/docs. The
49      generated documentation is included in the tarball. If you want to
50      generate it yourself, then run `make html'. Note that for this you need
51      to have the following programs installed: Doxygen, Graphviz, Ghostscript,
52      Latex.
53
54
55Configure Options and Variables
56===============================
57
58In step 2 you can customize the actions of configure by setting variables
59and passing options to it. This can be done like this:
60`./configure [OPTION]... [VARIABLE=VALUE]...'
61
62Below you will find some useful variables and options (see `./configure --help'
63for more):
64
65CXX='comp'
66
67  Change the C++ compiler to 'comp'.
68
69CXXFLAGS='flags'
70
71  Pass the 'flags' to the compiler. For example CXXFLAGS='-O3 -march=pentium-m'
72  turns on generation of aggressively optimized Pentium-M specific code.
73
74--prefix=PREFIX
75
76  Set the installation prefix to PREFIX. By default it is /usr/local.
77
78--enable-demo
79
80   Build the examples in the demo subdirectory.
81
82--disable-demo
83
84   Do not build the examples in the demo subdirectory (default).
85
86--enable-tools
87
88   Build the programs in the tools subdirectory (default).
89
90--disable-tools
91
92   Do not build the programs in the tools subdirectory.
93
94--with-glpk[=PREFIX]
95
96   Enable GLPK support (default). You should specify the prefix too if
97   you installed GLPK to some non-standard location (e.g. your home
98   directory). If it is not found, GLPK support will be disabled.
99
100--with-glpk-includedir=DIR
101
102   The directory where the GLPK header files are located. This is only
103   useful when the GLPK headers and libraries are not under the same
104   prefix (which is unlikely).
105
106--with-glpk-libdir=DIR
107
108   The directory where the GLPK libraries are located. This is only
109   useful when the GLPK headers and libraries are not under the same
110   prefix (which is unlikely).
111
112--without-glpk
113
114   Disable GLPK support.
115
116--with-cplex[=PREFIX]
117
118   Enable CPLEX support (default). You should specify the prefix too
119   if you installed CPLEX to some non-standard location
120   (e.g. /opt/ilog/cplex75). If it is not found, CPLEX support will be
121   disabled.
122
123--with-cplex-includedir=DIR
124
125   The directory where the CPLEX header files are located. This is
126   only useful when the CPLEX headers and libraries are not under the
127   same prefix (e.g.  /usr/local/cplex/cplex75/include).
128
129--with-cplex-libdir=DIR
130
131   The directory where the CPLEX libraries are located. This is only
132   useful when the CPLEX headers and libraries are not under the same
133   prefix (e.g.
134   /usr/local/cplex/cplex75/lib/i86_linux2_glibc2.2_gcc3.0/static_pic_mt).
135
136--without-cplex
137
138   Disable CPLEX support.
139
140--with-soplex[=PREFIX]
141
142   Enable SoPlex support (default). You should specify the prefix too if
143   you installed SoPlex to some non-standard location (e.g. your home
144   directory). If it is not found, SoPlex support will be disabled.
145
146--with-soplex-includedir=DIR
147
148   The directory where the SoPlex header files are located. This is only
149   useful when the SoPlex headers and libraries are not under the same
150   prefix (which is unlikely).
151
152--with-soplex-libdir=DIR
153
154   The directory where the SoPlex libraries are located. This is only
155   useful when the SoPlex headers and libraries are not under the same
156   prefix (which is unlikely).
157
158--without-soplex
159
160   Disable SoPlex support.
Note: See TracBrowser for help on using the repository browser.