namespace lemon {

/*!

\page graph-io-page Graph Input-Output

The standard graph IO enables to store graphs and additional maps

in a flexible and efficient way. 

\section format The general file format

The file contains sections in the following order:

\li nodeset

\li edgeset

\li nodes

\li edges

\li attributes

The nodeset section starts with the following line:

<tt>\@nodeset</tt>

The next line contains the names of the nodemaps, separated by whitespaces.  Each

following line describes a node in the graph: it contains the values of the

maps in the right order. The map named "id" should contain unique values

because it is regarded as an ID-map. For example:

\code

@nodeset

id  x-coord  y-coord  color

3   1.0      4.0      blue

5   2.3      5.7      red

12  7.8      2.3      green

\endcode

The edgeset section is very similar to the nodeset section, it has

the same coloumn oriented structure. It starts with the line 

<tt>\@edgeset</tt>

The next line contains the whitespace separated list of names of the maps.

Each of the next lines describes one edge. The first two elements in the line

are the IDs of the source and target (or tail and head) node of the edge as they occur in the ID node

map. You can also have an optional ID map on the edges for later reference.

\code

@edgeset

             id    weight   label

3   5        a     4.3      a-edge

5   12       c     2.6      c-edge

3   12       g     3.4      g-edge

\endcode

The next section contains <em>labeled nodes</em> (i.e. nodes having a special

label on them). The section starts with

<tt> \@nodes </tt>

Each of the next lines contains a label for a node in the graph 

and then the ID described in the nodeset section.

\code

@nodes 

source 3

target 12

\endcode

The last section describes the <em>labeled edges</em>

(i.e. edges having a special label on them). It starts with \c \@edges

and then each line contains the name of the edge and the ID.

\code

@nodes 

observed c

\endcode

The file may contain empty lines and comment lines. The comment lines

start with an \c # character.

The attributes section can handle some information about the graph. It

contains in each line an key and the mapped value to key. The key should

be a string without whitespace, the value can be from various type.

\code

@attributes

title "Four colored plan graph"

author "Balazs DEZSO"

copyright "Lemon Library"

version 12

\endcode

\code

@end

\endcode

=======

The file ends with the 

<tt> \@end </tt>

line.

\section use Using graph input-output

The graph input and output is based on reading and writing  commands. The user

adds reading and writing commands to the reader or writer class, then he

calls the \c run() method that executes all the given commands.

\subsection write Writing a graph

The \c GraphWriter class provides the graph output. To write a graph

you should first give writing commands to the writer. You can declare

write command as \c NodeMap or \c EdgeMap writing and labeled Node and

Edge writing.

\code

GraphWriter<ListGraph> writer(std::cout, graph);

\endcode

The \c writeNodeMap() function declares a \c NodeMap writing command in the

\c GraphWriter. You should give a name of the map and the map

object as parameters. The NodeMap writing command with name "id" should write a 

unique map because it is regarded as ID map.

\see IdMap, DescriptorMap  

\code

IdMap<ListGraph, Node> nodeIdMap;

writer.writeNodeMap("id", nodeIdMap);

writer.writeNodeMap("x-coord", xCoordMap);

writer.writeNodeMap("y-coord", yCoordMap);

writer.writeNodeMap("color", colorMap);

\endcode

With the \c writeEdgeMap() member function you can give an edge map

writing command similar to the NodeMaps.

\see IdMap, DescriptorMap  

\code

DescriptorMap<ListGraph, Edge, ListGraph::EdgeMap<int> > edgeDescMap(graph);

writer.writeEdgeMap("descriptor", edgeDescMap);

writer.writeEdgeMap("weight", weightMap);

writer.writeEdgeMap("label", labelMap);

\endcode

With \c writeNode() and \c writeEdge() functions you can designate Nodes and

Edges in the graph. For example, you can write out the source and target node

of a maximum flow instance.

\code

writer.writeNode("source", sourceNode);

writer.writeNode("target", targetNode);

writer.writeEdge("observed", edge);

\endcode

With \c writeAttribute() function you can write an attribute to the file.

\code

writer.writeAttribute("author", "Balazs DEZSO");

writer.writeAttribute("version", 12);

\endcode

After you give all write commands you must call the \c run() member

function, which executes all the writing commands.

\code

writer.run();

\endcode

\subsection reading Reading a graph

The given file format may contain several maps and labeled nodes or edges.

If you read a graph you need not read all the maps and items just those

that you need. The interface of the \c GraphReader is very similar to

the GraphWriter but the reading method does not depend on the order of the

given commands.

The reader object assumes that each not readed value does not contain 

whitespaces, therefore it has some extra possibilities to control how

it should skip the values when the string representation contains spaces.

\code

GraphReader<ListGraph> reader(std::cin, graph);

\endcode

The \c readNodeMap() function reads a map from the \c \@nodeset section.

If there is a map that you do not want to read from the file and there are

whitespaces in the string represenation of the values then you should

call the \c skipNodeMap() template member function with proper parameters.

\see QuotedStringReader

\code

reader.readNodeMap("x-coord", xCoordMap);

reader.readNodeMap("y-coord", yCoordMap);

reader.readNodeMap<QuotedStringReader>("label", labelMap);

reader.skipNodeMap<QuotedStringReader>("description");

reader.readNodeMap("color", colorMap);

\endcode

With the \c readEdgeMap() member function you can give an edge map

reading command similar to the NodeMaps. 

\code

reader.readEdgeMap("weight", weightMap);

reader.readEdgeMap("label", labelMap);

\endcode

With \c readNode() and \c readEdge() functions you can read labeled Nodes and

Edges.

\code

reader.readNode("source", sourceNode);

reader.readNode("target", targetNode);

reader.readEdge("observed", edge);

\endcode

With \c readAttribute() function you can read an attribute from the file.

\code

std::string author;

writer.readAttribute("author", author);

int version;

writer.writeAttribute("version", version);

\endcode

After you give all read commands you must call the \c run() member

function, which executes all the commands.

\code

reader.run();

\endcode

\section types Background of Reading and Writing

To read a map (on the nodes or edges)

the \c GraphReader should know how to read a Value from the given map.

By the default implementation the input operator reads a value from

the stream and the type of the readed value is the value type of the given map.

When the reader should skip a value in the stream, because you do not

want to store it in a map, the reader skips a character sequence without 

whitespace. 

If you want to change the functionality of the reader, you can use

template parameters to specialize it. When you give a reading

command for a map you can give a Reader type as template parameter.

With this template parameter you can control how the Reader reads

a value from the stream.

The reader has the next structure: 

\code

struct TypeReader {

  typedef TypeName Value;

  void read(std::istream& is, Value& value);

};

\endcode

For example, the \c "strings" nodemap contains strings and you do not need

the value of the string just the length. Then you can implement own Reader

struct.

\code

struct LengthReader {

  typedef int Value;

  void read(std::istream& is, Value& value) {

    std::string tmp;

    is >> tmp;

    value = tmp.length();

  }

};

...

reader.readNodeMap<LengthReader>("strings", lengthMap);

\endcode  

The global functionality of the reader class can be changed by giving a

special template parameter to the GraphReader class. By default, the

template parameter is \c DefaultReaderTraits. A reader traits class 

should provide an inner template class Reader for each type, and an 

DefaultReader for skipping a value.

The specialization of  writing should be very similar to that of reading.

\section undir Undir graphs

In the undir graph format there is an \c undiredgeset section instead of

the \c edgeset section. The first line of the section describes the 

undirected egdes' names and all next lines describes one undirected edge

with the the incident nodes and the values of the map.

The format handles the directed edge maps as a syntactical sugar, if there

is two map which names are the same with a \c '+' and a \c '-' prefix

then it can be read as an directed map.

\code

@undiredgeset

             id    capacity +flow -flow

32   2       1     4.3      2.0	  0.0

21   21      5     2.6      0.0   2.6

21   12      8     3.4      0.0   0.0

\endcode

The \c edges section changed to \c undiredges section. This section

describes labeled edges and undirected edges. The directed edge label

should start with a \c '+' and a \c '-' prefix what decide the direction

of the edge. 

\code

@undiredges

undiredge 1

+edge 5

-back 5

\endcode

There are similar classes to the \c GraphReader ans \c GraphWriter

which handle the undirected graphs. These classes are the 

\c UndirGraphReader and \UndirGraphWriter.

The \c readUndirMap() function reads an undirected map and the

\c readUndirEdge() reads an undirected edge from the file, 

\code

reader.readUndirEdgeMap("capacity", capacityMap);

reader.readEdgeMap("flow", flowMap);

...

reader.readUndirEdge("undir_edge", undir_edge);

reader.readEdge("edge", edge);

\endcode

\section advanced Advanced features

The graph reader and writer classes gives an easy way to read and write

graphs. But sometimes we want more advanced features. This way we can

use the more general lemon reader and writer interface.

The lemon format is an section oriented file format. It contains one or

more section, each starts with a line with \c \@ first character.

The content of the section this way cannot contain line with \c \@ first

character. The file may contains comment lines with \c # first character.

The \c LemonReader and \c LemonWriter gives a framework to read and

write sections. There are various section reader and section writer

classes which can be attached to a \c LemonReader or a \c LemonWriter.

There are default section readers and writers for reading and writing

item sets, and labeled items in the graph. These reads and writes

the format described above. Other type of data can be handled with own

section reader and writer classes which are inherited from the

\c LemonReader::SectionReader or the \c LemonWriter::SectionWriter classes.

The next example defines a special section reader which reads the

\c \@description sections into a string:

\code 

class DescriptionReader : LemonReader::SectionReader {

protected:

  virtual bool header(const std::string& line) {

    std::istringstream ls(line);

    std::string head;

    ls >> head;

    return head == "@description";

  }

  virtual void read(std::istream& is) {

    std::string line;

    while (getline(is, line)) {

      desc += line;

    }

  }

public:

  typedef LemonReader::SectionReader Parent;

  DescriptionReader(LemonReader& reader) : Parent(reader) {}

  const std::string& description() const {

    return description;

  }

private:

  std::string desc;

};

\endcode

The other advanced stuff of the generalized file format is that 

multiple edgesets can be stored to the same nodeset. It can be used 

by example as a network traffic matrix.

In example there is a network with symmetric links and there are assymetric

traffic request on the network. This construction can be stored in an

undirected graph and in an directed NewEdgeSetAdaptor class. The example

shows the input with the LemonReader class:

\code

UndirListGraph network;

UndirListGraph::UndirEdgeSet<double> capacity;

NewEdgeSetAdaptor<UndirListGraph> traffic(network);

NewEdgeSetAdaptor<UndirListGraph>::EdgeSet<double> request(network);

LemonReader reader(std::cin);

NodeSetReader nodesetReader(reader, network);

UndirEdgeSetReader undirEdgesetReader(reader, network, nodesetReader);

undirEdgesetReader.readEdgeMap("capacity", capacity);

EdgeSetReader edgesetReader(reader, traffic, nodesetReader);

edgesetReader.readEdgeMap("request", request);

reader.run();

\endcode

Because the GraphReader and the UndirGraphReader can be converted

to LemonReader and it can resolve the ID's of the items, the previous

result can be achived with the UndirGraphReader class also.

\code

UndirListGraph network;

UndirListGraph::UndirEdgeSet<double> capacity;

NewEdgeSetAdaptor<UndirListGraph> traffic(network);

NewEdgeSetAdaptor<UndirListGraph>::EdgeSet<double> request(network);

UndirGraphReader reader(std::cin, network);

reader.readEdgeMap("capacity", capacity);

EdgeSetReader edgesetReader(reader, traffic, reader);

edgesetReader.readEdgeMap("request", request);

reader.run();

\endcode

\author Balazs Dezso

*/

}