COIN-OR::LEMON - Graph Library

Changeset 992:78434a448b5e in lemon-main


Ignore:
Timestamp:
12/22/11 20:55:43 (13 years ago)
Author:
Alpar Juttner <alpar@…>
Branch:
default
Phase:
public
Message:

Update INSTALL to use CMAKE. Also update AUTHORS and LICENSE

Files:
3 edited

Legend:

Unmodified
Added
Removed
  • AUTHORS

    r951 r992  
    1 The authors of the 1.x series are
     1The main developers of release series 1.x are
    22
    33 * Balazs Dezso <deba@inf.elte.hu>
     
    66 * Akos Ladanyi <ladanyi@tmit.bme.hu>
    77
    8 For more details on the actual contribution, please visit the history
    9 of the main LEMON source repository: http://lemon.cs.elte.hu/hg/lemon
     8For more complete list of contributors, please visit the history of
     9the LEMON source code repository: http://lemon.cs.elte.hu/hg/lemon
    1010
    11 Moreover, this version is heavily based on the 0.x series of
    12 LEMON. Here is the list of people who contributed to those versions.
     11Moreover, this version is heavily based on version 0.x of LEMON. Here
     12is the list of people who contributed to those versions.
    1313
    1414 * Mihaly Barasz <klao@cs.elte.hu>
  • INSTALL

    r824 r992  
    22=========================
    33
    4 Since you are reading this I assume you already obtained one of the release
    5 tarballs and successfully extracted it. The latest version of LEMON is
    6 available at our web page (http://lemon.cs.elte.hu/).
     4This file contains instructions for building and installing LEMON from
     5source on Linux. The process on Windows is similar.
    76
    8 LEMON provides two different build environments, one is based on "autotool",
    9 while the other is based on "cmake". This file contains instructions only for
    10 the former one, which is the recommended build environment on Linux, Mac OSX
    11 and other unices or if you use Cygwin on Windows. For cmake installation
    12 instructions visit http://lemon.cs.elte.hu.
     7Note that it is not necessary to install LEMON in order to use
     8it. Instead, you can easily integrate it with your own code
     9directly. For instructions, see
     10https://lemon.cs.elte.hu/trac/lemon/wiki/HowToCompile
     11
    1312
    1413In order to install LEMON from the extracted source tarball you have to
    1514issue the following commands:
    1615
    17    1. `cd lemon-x.y.z'
     16   1. Step into the root of the source directory.
    1817
    19       This command changes to the directory which was created when you
    20       extracted the sources. The x.y.z part is a version number.
     18      $ cd lemon-x.y.z
    2119
    22    2. `./configure'
     20   2. Create a build subdirectory and step into it.
    2321
    24       This command runs the configure shell script, which does some checks and
    25       creates the makefiles.
     22      $ mkdir build
     23      $ cd build
    2624
    27    3. `make'
     25   3. Perform system checks and create the makefiles.
    2826
    29       This command compiles the non-template part of LEMON into libemon.a
    30       file. It also compiles the programs in the tools subdirectory by
    31       default.
     27      $ cmake ..
    3228
    33    4. `make check'
     29   4. Build LEMON.
    3430
    35       This step is optional, but recommended. It runs the test programs that
    36       we developed for LEMON to check whether the library works properly on
    37       your platform.
     31      $ make
    3832
    39    5. `make install'
     33      This command compiles the non-template part of LEMON into
     34      libemon.a file. It also compiles the programs in the 'tools' and
     35      'demo' subdirectories.
     36
     37   5. [Optional] Compile and run the self-tests.
     38
     39      $ make check
     40
     41   5. [Optional] Generate the user documentation.
     42
     43      $ make html
     44
     45      The release tarballs already include the documentation.
     46
     47      Note that for this step you need to have the following tools
     48      installed: Python, Doxygen, Graphviz, Ghostscript, LaTeX.
     49
     50   6. [Optional] Install LEMON
     51
     52      $ make install
    4053
    4154      This command installs LEMON under /usr/local (you will need root
    42       privileges to be able to do that). If you want to install it to some
    43       other location, then pass the --prefix=DIRECTORY flag to configure in
    44       step 2. For example: `./configure --prefix=/home/username/lemon'.
    45 
    46    6. `make install-html'
    47 
    48       This command installs the documentation under share/doc/lemon/docs. The
    49       generated documentation is included in the tarball. If you want to
    50       generate it yourself, then run `make html'. Note that for this you need
    51       to have the following programs installed: Doxygen, Graphviz, Ghostscript,
    52       Latex.
    53 
     55      privileges to be able to do that). If you want to install it to
     56      some other location, then pass the
     57      -DCMAKE_INSTALL_PREFIX=DIRECTORY flag to cmake in Step 3.
     58      For example:
     59     
     60      $ cmake -DCMAKE_INSTALL_PREFIX=/home/username/lemon'
    5461
    5562Configure Options and Variables
    5663===============================
    5764
    58 In step 2 you can customize the actions of configure by setting variables
    59 and passing options to it. This can be done like this:
    60 `./configure [OPTION]... [VARIABLE=VALUE]...'
     65In Step 3, you can customize the build process by passing options to CMAKE.
    6166
    62 Below you will find some useful variables and options (see `./configure --help'
    63 for more):
     67$ cmake [OPTIONS] ..
    6468
    65 CXX='comp'
     69You find a list of the most useful options below.
    6670
    67   Change the C++ compiler to 'comp'.
    68 
    69 CXXFLAGS='flags'
    70 
    71   Pass the 'flags' to the compiler. For example CXXFLAGS='-O3 -march=pentium-m'
    72   turns on generation of aggressively optimized Pentium-M specific code.
    73 
    74 --prefix=PREFIX
     71-DCMAKE_INSTALL_PREFIX=PREFIX
    7572
    7673  Set the installation prefix to PREFIX. By default it is /usr/local.
    7774
    78 --enable-tools
     75-DCMAKE_BUILD_TYPE=[Release|Debug|Maintainer|...]
    7976
    80    Build the programs in the tools subdirectory (default).
     77  This sets the compiler options. The choices are the following
    8178
    82 --disable-tools
     79  'Release': A strong optimization is turned on (-O3 with gcc). This
     80    is the default setting and we strongly recommend using this for
     81    the final compilation.
    8382
    84    Do not build the programs in the tools subdirectory.
     83  'Debug': Optimization is turned off and debug info is added (-O0
     84    -ggdb with gcc). If is recommended during the development.
    8585
    86 --with-glpk[=PREFIX]
     86  'Maintainer': The same as 'Debug' but the compiler warnings are
     87    converted to errors (-Werror with gcc). In addition, 'make' will
     88    also automatically compile and execute the test codes. It is the
     89    best way of ensuring that LEMON codebase is clean and safe.
    8790
    88    Enable GLPK support (default). You should specify the prefix too if
    89    you installed GLPK to some non-standard location (e.g. your home
    90    directory). If it is not found, GLPK support will be disabled.
     91  'RelWithDebInfo': Optimized build with debug info.
    9192
    92 --with-glpk-includedir=DIR
     93  'MinSizeRel': Size optimized build (-Os with gcc)
    9394
    94    The directory where the GLPK header files are located. This is only
    95    useful when the GLPK headers and libraries are not under the same
    96    prefix (which is unlikely).
     95-DTEST_WITH_VALGRIND=YES
    9796
    98 --with-glpk-libdir=DIR
     97  Using this, the test codes will be executed using valgrind. It is a
     98  very effective way of identifying indexing problems and memory leaks.
    9999
    100    The directory where the GLPK libraries are located. This is only
    101    useful when the GLPK headers and libraries are not under the same
    102    prefix (which is unlikely).
     100-DCMAKE_CXX_COMPILER=path-to-compiler
    103101
    104 --without-glpk
     102  Change the compiler to be used.
    105103
    106    Disable GLPK support.
     104-DBUILD_SHARED_LIBS=TRUE
    107105
    108 --with-cplex[=PREFIX]
     106  Build shared library instead of static one. Think twice if you
     107  really want to use this option.
    109108
    110    Enable CPLEX support (default). You should specify the prefix too
    111    if you installed CPLEX to some non-standard location
    112    (e.g. /opt/ilog/cplex75). If it is not found, CPLEX support will be
    113    disabled.
     109-DGLPK_ROOT_DIR=DIRECTORY
     110-DCOIN_ROOT_DIR=DIRECTORY
     111-DCPLEX_ROOT_DIR=DIRECTORY
    114112
    115 --with-cplex-includedir=DIR
    116 
    117    The directory where the CPLEX header files are located. This is
    118    only useful when the CPLEX headers and libraries are not under the
    119    same prefix (e.g.  /usr/local/cplex/cplex75/include).
    120 
    121 --with-cplex-libdir=DIR
    122 
    123    The directory where the CPLEX libraries are located. This is only
    124    useful when the CPLEX headers and libraries are not under the same
    125    prefix (e.g.
    126    /usr/local/cplex/cplex75/lib/i86_linux2_glibc2.2_gcc3.0/static_pic_mt).
    127 
    128 --without-cplex
    129 
    130    Disable CPLEX support.
    131 
    132 --with-soplex[=PREFIX]
    133 
    134    Enable SoPlex support (default). You should specify the prefix too if
    135    you installed SoPlex to some non-standard location (e.g. your home
    136    directory). If it is not found, SoPlex support will be disabled.
    137 
    138 --with-soplex-includedir=DIR
    139 
    140    The directory where the SoPlex header files are located. This is only
    141    useful when the SoPlex headers and libraries are not under the same
    142    prefix (which is unlikely).
    143 
    144 --with-soplex-libdir=DIR
    145 
    146    The directory where the SoPlex libraries are located. This is only
    147    useful when the SoPlex headers and libraries are not under the same
    148    prefix (which is unlikely).
    149 
    150 --without-soplex
    151 
    152    Disable SoPlex support.
    153 
    154 --with-coin[=PREFIX]
    155 
    156    Enable support for COIN-OR solvers (CLP and CBC). You should
    157    specify the prefix too. (by default, COIN-OR tools install
    158    themselves to the source code directory). This command enables the
    159    solvers that are actually found.
    160 
    161 --with-coin-includedir=DIR
    162 
    163    The directory where the COIN-OR header files are located. This is
    164    only useful when the COIN-OR headers and libraries are not under
    165    the same prefix (which is unlikely).
    166 
    167 --with-coin-libdir=DIR
    168 
    169    The directory where the COIN-OR libraries are located. This is only
    170    useful when the COIN-OR headers and libraries are not under the
    171    same prefix (which is unlikely).
    172 
    173 --without-coin
    174 
    175    Disable COIN-OR support.
    176 
     113  Install root directory prefixes of optional third party libraries.
    177114
    178115Makefile Variables
    179116==================
    180117
    181 Some Makefile variables are reserved by the GNU Coding Standards for
    182 the use of the "user" - the person building the package. For instance,
    183 CXX and CXXFLAGS are such variables, and have the same meaning as
    184 explained in the previous section. These variables can be set on the
    185 command line when invoking `make' like this:
    186 `make [VARIABLE=VALUE]...'
     118make VERBOSE=1
    187119
    188 WARNINGCXXFLAGS is a non-standard Makefile variable introduced by us
    189 to hold several compiler flags related to warnings. Its default value
    190 can be overridden when invoking `make'. For example to disable all
    191 warning flags use `make WARNINGCXXFLAGS='.
    192 
    193 In order to turn off a single flag from the default set of warning
    194 flags, you can use the CXXFLAGS variable, since this is passed after
    195 WARNINGCXXFLAGS. For example to turn off `-Wold-style-cast' (which is
    196 used by default when g++ is detected) you can use
    197 `make CXXFLAGS="-g -O2 -Wno-old-style-cast"'.
     120   This results in a more verbose output by showing the full
     121   compiler and linker commands.
  • LICENSE

    r879 r992  
    22copyright/license.
    33
    4 Copyright (C) 2003-2010 Egervary Jeno Kombinatorikus Optimalizalasi
     4Copyright (C) 2003-2012 Egervary Jeno Kombinatorikus Optimalizalasi
    55Kutatocsoport (Egervary Combinatorial Optimization Research Group,
    66EGRES).
Note: See TracChangeset for help on using the changeset viewer.